Beli Suhu Kamar bekas (996)

Kondisi: sangat baik (bekas), CTS Model: C-40/350 Ex/l Climate Test Chamber, Water-Cooled ATEX Zone 1 The Ex/l designation indicates that this climate test chamber is suitable for use in potentially explosive atmospheres in Zone 1. This means it is intended for use in environments where explosive atmospheres may arise. Such equipment is specially designed and tested to ensure safety in these environments. Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: - Heating: 3.5 K/min - Cooling: 4 K/min Heat compensation: - approx. 3500 W at +20°C - approx. 2000 W at -20°C Climate Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ +3.0 % r.h. over time Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimens, without heat compensation, and without additional equipment. Options may affect performance data. Technical Specifications: Refrigeration unit: water-cooled, low-noise, fully hermetic, continuously variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load capacity 150 kg/m² Insert grid: Stainless steel, supporting surface 620 x 600 mm, maximum load per grid 35 kg, maximum total grid load 100 kg Control System: 32-bit controller LCD operating panel Digital display of set and actual values Numerical input of set values Plain text error messages RS 232 interface Ethernet interface Free switching channels for customer-specific test specimen control Dimensions: Test volume: 350 liters Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm Operating Data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 7.15 kW Nominal current: 14.3 A Psdpfxowvr H Uj Ab Iord Protection class: IP 54 Sound pressure level: [value missing]

Kondisi: sangat baik (bekas), Heraeus Vötsch Type: VTS 7027-15 Vötsch Temperature Test Chamber, Water-Cooled Temperature Range: -70°C to +180°C Rate of Temperature Change: Temporal Temperature Deviation: ± 0.3 to ± 0.8 K Pedpewl Argefx Ab Iord Spatial Temperature Deviation: ± 0.5 to ± 2.0 K Cooling Rate: 18.0 K/min Heating Rate: 17.0 K/min Test Chamber Dimensions (W x D x H): 580 x 620 x 950 mm External Dimensions (W x D x H): 870 x 1895 x 1775 mm Side Feedthroughs: 1 x 60 mm diameter and 2 x 120 mm diameter Voltage: 3/N/PE AC 400V ±10% 50Hz Rated Power: 16 kW Rated Current: 31 A Refrigerants: R452A / R23 Approx. 270 liters Weight: 835 kg Safety Information for Buyers: The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful checking, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data and information!) For further questions, feel free to contact us by phone.

Kondisi: bekas, Type: CS-70/900 CTS Climate Test Chamber with Humidity, Water-Cooled (converted to R-452a) Temperature range: -70 °C to +180 °C Humidity range: 10–98% r.H. Test chamber internal dimensions (approx.): Height 870 mm / Width 1000 mm / Depth 1000 mm External dimensions (approx.): Height 1950 mm / Width 1200 mm / Depth 2220 mm Control cabinet (approx.): Height 2100 mm / Width 800 mm / Depth 400 mm Test chamber volume: 900 litres Refrigerants: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Connected load: 21.2 kW, Rated current: 35.7 A Climate test chamber weight: 900 kg Control cabinet weight: 150 kg For your security as a buyer, please note: The following points are carried out on all our offered chambers in advance: Prjdjxb Dm Ijpfx Ab Ijd 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data and information subject to change and error!) If you have further questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), Here we offer a temperature test chamber. Water-cooled Temperature range: -45°C to +180°C External dimensions: Width 1300 mm x Height 2100 mm x Depth 2250 mm Test chamber dimensions: Width 840 mm x Height 840 mm x Depth 840 mm Chiller unit: Width 2300 mm x Height 2000 mm x Depth 1300 mm Average heating rate: approx. 3 K/min Pedpjmn Rciefx Ab Isrd Average cooling rate: approx. 2 K/min Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Model: VTS 600/45 RS Refrigerant: R452 Condition: used Scope of delivery: (See picture) (Specifications and technical details are subject to change and errors excepted!) We are happy to answer any further questions by phone.

Kondisi: sangat baik (bekas), Here we offer you a temperature shock test chamber. Weiss Temperature Shock Test Chamber – Air-Cooled Specification: Temperature range, hot chamber: +60°C to +220°C Temperature range, cold chamber: -10°C to -80°C Transfer between hot/cold chamber: 10 s Temperature constancy: ±1 K Dimensions and further data: External dimensions: Height: 1990 mm Width (without / with door hinge): approx. 1820 mm / 1850 mm Depth (without / with test chamber door): approx. 900 mm / 1155 mm Basket dimensions (test chamber): Height: 450 mm Width: 500 mm Depth: 600 mm Volume: 130 liters Maximum load, test chamber: 20 kg Maximum load, test chamber floor: 20 kg Cooling water pressure: min. 2 ... max. 6 bar Maximum fuse: 35 A (plug: 32 A CEE) Sound pressure level, 1 m in front of unit: approx. 65 dB(A) Refrigeration cascade: water-cooled Electrical connection: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Podpelgux Ajfx Ab Isrd Condition: used Scope of delivery: (See picture) (Technical specifications subject to change and errors excepted!) If you have any further questions, we will be happy to answer them for you by telephone.

Kondisi: sangat baik (bekas), Zwick / Roell temperature chamber for AllroundLine We are offering you a Zwick / Roell temperature chamber for AllroundLine. Description: Zwick / SFL Severn Furnaces Limited Zwick/Roell temperature chambers for testing in the temperature range of -80°C to +250°C. Reproducible test results and seamless integration of the temperature chamber into the testing system. External dimensions: depth 1050 mm, width 600 mm, height 800 mm Internal dimensions: depth 530 mm, width 450 mm, height 650 mm Temperature chambers for the AllroundLine Cooling via LN2 (liquid nitrogen) (-80°C connection external, not included) Type: EC75A-1-0-1-0 Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) Prsdpfxjk Rutpj Ab Ied If you have any further questions, we will be happy to answer them by phone.

Kondisi: bekas, RS simulators Water-cooled temperature test chamber Prodpfx Abev Rcbas Ied Advanced sequence program controller (SE-702 with touch panel and data logger for measurement recording) New filter dryer, refrigeration compressor oil and refrigerants (R23/3.25kg and R452a/12kg) on delivery, included Leak test, oil strainers and sight glasses renewed The chamber is supplied with an RMS base frame, a rack for holding the test specimen, and a separate control panel (Pure RMS housing, NO shaker included!) Special feature: The RMS base frame can be pulled out using a pallet jack, similar to a shaker. This enables easy test setup outside the chamber. Measurement lines can also be routed externally via a feedthrough in the RMS base plate. The system includes a compressed air dryer (anti-condensation dryer), which prevents condensation during the heating phase—commonly used in tests with electronics. Test chamber internal dimensions: approx. 1000mm (H) x 1400mm (W) x 900mm (D) Temperature range: -70°C to +180°C Current consumption: approx. 100 A Total power: approx. 50 kVA Cooling and heating rate: 10 K / min Since the chambers are refurbished and retrofitted, delivery time is approx. 8-10 weeks from order date! Type: TS1000/70-10K For your safety as a buyer, please note the following: The following measures are carried out on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak testing with certificate 4. After successful checks, the chambers undergo a trial run monitored with calibrated instruments. Condition: used Scope of delivery: (Temperature chamber TS1000/70-10K, without test chamber contents, without shaker) (Technical specifications subject to change and errors excepted!) If you have further questions, we will be happy to answer them by phone.

Kondisi: sangat baik (bekas), Here we offer you a TPS Blue-M temperature convection oven. Prjdpfx Abjdv Rabo Ijd TPS Blue-M Temperature Convection Oven Blue M 7780 Specifications: Temperature range: 15°C above ambient temperature up to 704°C Internal dimensions (W x D x H): 25 cm x 20 cm x 20 cm External dimensions (W x D x H): 51 cm x 38 cm x 72 cm Cladding dimensions (W x D x H): 68 cm x 48 cm x 77 cm Electrical power: 380V, 3 phase, 50 Hz CW-7780 features 8 shelf positions on 2" centers Fume extraction hood, stainless steel design, without extractor/fan Type: CW-7780-JY-MP550 Condition: used Scope of delivery: (see picture) (Specifications and data subject to change and error!) For further questions, feel free to contact us by phone.

Kondisi: sangat baik (bekas), Weiss temperature test chamber We are offering a temperature test chamber. Weiss temperature test chamber, water-cooled Technical specifications: Test chamber designation: WT-600/70 External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Test chamber volume: approx. 600 liters Cooling / Heating operation: -70°C to +180°C Temperature change rate: Cooling approx. 2.5 K/min Heating approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Nominal power: 9.1 kW Nominal current: 19 A Required fuse: 32 A slow blow Permissible test specimen weight: Total loading capacity of shelves: 80 kg Test chamber floor: 80 kg, Removable shelf: 40 kg Refrigerants: R 404A / R23 Weight: 675 kg Type: WT-600/70 Important safety information for buyers: The following points are carried out in advance on all chambers offered by us: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerants 3. After successful inspection, the chambers undergo a trial run, monitored with calibrated instruments. Condition: used Scope of delivery: (see photo) (Changes and errors in the technical data are subject to confirmation!) Prsdpfjiqk Abjx Ab Ijd We are happy to answer any additional questions you may have by phone.

Kondisi: sangat baik (bekas), RS Simulators Type: ST2K320/45 Water-cooled shock test system Operating climatic range Upper test chamber temperatures Temperature range: +40 °C to +180 °C Lower test chamber temperatures Temperature range: -40 °C to +100 °C Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions: Width 1100 mm, Height 2300 mm, Depth 2300 mm Test chamber dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Podpfxjtqcu Ee Ab Isrd Electrical power supply: Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber weight: approx. 850 kg Important information for your safety as a buyer! The following procedures are carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data and details!) For further questions, we are happy to assist you by phone.

Kondisi: baik (bekas), CTS Model: TSR-30/1000 Water-cooled The model designation of the CTS cabinet series is composed as follows: e.g. Model TSR-30/1000 1) T means: Temperature 2) S means: Stress Screening 3) R means: External Conditioning 4) -30 means: minimum temperature -30 °C 5) 1000 means: 1000 liters test chamber volume Technical Performance Data: A) TSR-30/1000 basic unit without hose connections, i.e. when used as a standalone temperature test chamber Temperature tests: Temperature range: -40°C to +180°C End temperature: -45°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating: 6.0 K/min Cooling: 5.0 K/min Thermal output: approx. 5000 W at +20°C Poderivfcepfx Ab Ijrd approx. 4200 W at 0°C approx. 3000 W at -20°C Technical data refers to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment. Air volume flow approx. 2000 m³/h B) TSR-30/1000 basic unit with hose connections, for connection to an external, customer-provided test chamber Temperature tests: Temperature range: -30°C to +170°C Temperature deviation: ≤ ±0.1 to 0.5 K over time Average temperature change rate, measured with closed-circuit Heating: 4.0 K/min Cooling: 4.0 K/min in the range from +150°C to -10°C Technical data refers to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment, measured with closed-circuit. Note: The external, customer-provided test chamber must be absolutely sealed and properly insulated; any feed-throughs must be fully sealed by the customer. Dimensions: Test volume: 1000 liters Recirculation air connection Ø 200 mm Test chamber dimensions Height: 900 mm Width: 1000 mm Depth: 1100 mm External dimensions Height: 1950 mm Width: 1270 mm Depth: 2245 mm Technical Features: Refrigeration unit: water-cooled, low-noise, fully hermetic infinitely variable power control via electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening, left-side hinge, one-hand operation, lockable. Shelving grid: stainless steel, support surface 970 x 980 mm Maximum load per shelf: 35 kg Total load with maximum shelf configuration: 100 kg Test compartment lighting: Halogen lamp 20 W, 12 V Control: - 32-bit controller - LCD control panel Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Nominal power: 13.3 kW Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 850 kg Important information for your safety as a buyer! The following measures are performed in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of supply: (see picture) (Specifications are subject to change and errors excepted!) If you have further questions, feel free to contact us by phone.

Kondisi: baik (bekas), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature variation: ± 0.1 to ± 0.5 K Spatial temperature variation: ± 0.5 to ± 2.0 K Cooling rate: 5.0 K/min Heating rate: 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber internal dimensions: width 580 mm x depth 765 mm x height 750 mm External dimensions: width 870 mm x depth 1595 mm x height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1m distance (free field measurement): < 69dB (A) Side port: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerants: R-404A and R-23 Weight: approx. 570 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, monitored using calibrated equipment. Psdpfx Aboun Rv Nj Ijrd Condition: used Scope of delivery: (See image) (Technical data subject to change and errors excepted!) Should you have any further questions, we are happy to answer them by phone.

Kondisi: baik (bekas), Autotherm Model: Tempering Unit Autotherm AW 95-12/VK/E Tempering Unit Autotherm AW95-12_VK for water/glycol temperature control (completely overhauled) Autotherm Temperature Control Unit AW: Designed for highly precise temperature regulation of water Autotherm tempering units are used in various industrial sectors, research, and laboratory applications. Temperature control units supply tools, open baths, double-walled tanks, heat exchangers, and temperature chambers with temperature-controlled water, keeping them precisely at the desired temperature. Areas of application: - Mechanical Engineering, e.g., solar and wind power industry, textile industry - Plastics processing - Chemical and pharmaceutical industry - Paper production - Medical technology - Food industry - Research Tempering Unit Autotherm AKW AW95-12/VK Temperature range: RT°C / +95°C Heating capacity: 12.0 kW Cooling capacity: 18.0 kW Passive cooling system via heat exchanger / connection to cooling water network required Nominal power: 14.5 kW Dimensions: 600 mm x 840 mm x 910 mm Power supply: 400 Volt / 50 Hz 13,400 Watt 19.6 A 5.1 bar Condition: used Scope of delivery: (See picture) (Subject to change and errors in technical data and specifications!) For further questions, please feel free to contact us by phone. Pjdpfx Abouigrzj Ierd

Kondisi: baik (bekas), Vötsch Type: VTS 7011-5 Heraeus Vötsch Temperature Chamber, Water-Cooled Test Chamber Volume: 110 liters Internal Dimensions: Width 560 mm, Depth 350 mm, Height 630 mm External Dimensions: Width 850 mm, Depth 1030 mm, Height 1640 mm Temperature Range: -70°C to +180°C Temporal Temperature Deviation: ±0.3 to 1 K Spatial Temperature Deviation: ±0.5 to ±2 K Temperature Change Rate (Cooling): 6 K/min Temperature Change Rate (Heating): 10 K/min Refrigerants: R-404 A / R 23 Voltage: 3/N/PE AC 400V±10% 50Hz Rated Power: 7.5 kW Rated Current: 13 A Weight: 360 kg For your safety as a buyer, please note the following information! The following steps are performed on our listed chambers in advance: 1. Functional check and replacement of necessary components 2. If needed, refilling with legally compliant refrigerant Podeum Uzmepfx Ab Isrd 3. Leak tightness test with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Subject to change and errors in technical specifications!) For further questions, feel free to contact us by phone.

Kondisi: sangat baik (bekas), CTS Temperature Test Chamber T-55/1000 Li Water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Rated current: 18 A Compressor: TFH2511Z / TFH2511Z, refrigerants R404A/R23 The model designation for the CTS chamber series consists of the following: For example, Type T-55/1000/Li 1) T stands for: Temperature 2) -55 stands for: minimum temperature -55 °C 3) 1000 stands for: 1000 liters of test chamber volume 4) Li stands for: special configuration for tests with lithium-ion batteries Control system: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numeric entry of set values - Error messages in plain text - Ethernet interface - RS232 interface - Free switching channels for user-side test specimen control Test chamber lighting: Energy-efficient, high-intensity LED light bar mounted on the door Shelf: Stainless steel, support area 970 x 980 mm Load capacity per shelf max. 35 kg Total max. load with full shelf configuration 100 kg 1a Port NW50 1b Port 2x NW125 1c Port 2x Rp 3/4" for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: - Heating: 2.5 K/min - Cooling: 2.5 K/min Heat compensation: - approx. 4000 W at +20°C - approx. 2200 W at -40°C Technical specifications refer to ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may influence the performance data. Dimensions: Test chamber volume: 1000 liters Test chamber dimensions: Height approx. 1000 mm, Width approx. 860 mm, Depth approx. 1100 mm External dimensions: Height approx. 1950 mm, Width approx. 1270 mm, Depth approx. 1900 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated current: 18 A Rated power: 9.5 kW Protection class: IP 54 Pedpfsvba Raox Ab Ierd Sound pressure level

Kondisi: sangat baik (bekas), Here we offer a TIRA temperature test chamber. TIRA Temperature Test Chamber, air-cooled The chamber is equipped with the option for an external test box including an external sensor connection, therefore it can also be used as an external temperature control unit. Temperature range: -20°C to +140°C Temperature stability over time: ±0.1°C to ±0.3°C External dimensions (W x D x H): 860 mm x 1500 mm x 2100 mm Test chamber dimensions (W x D x H): 601 mm x 545 mm x 692 mm Electrical connection: 400V +6% / -10% 50Hz 3P+N+PE Rated current: 10.0 (max. 17) A Rated power: 5.2 (max. 9.0) kW Net weight: 735 kg Refrigerant: R404A / R23 Type: TTRE 2001S For your security as the buyer, please note the following information: The following procedures are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run Condition: used Prodpfx Aenyh T Sjb Ijd Scope of delivery: (See picture) (Technical data and specifications subject to change and error!) If you have further questions, we will be happy to assist you by phone.

Kondisi: sangat baik (bekas), Vötsch Type: VTS³ 7027-25 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Performance Data: - Temperature change rate: 25 K/min - Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 615 mm - External dimensions: Height 1775 mm, Width 780 mm, Depth 1895 mm - Temperature range: -72°C to +180°C - Temporal temperature deviation: ±0.1 to ±0.5 - Spatial temperature uniformity: ±0.5 to ±2.0 - Cooling rate: 25 K/min - Heating rate: 25 K/min - Heat compensation at -20°C: 8000 W - Heat compensation at +20°C: 8000 W - Test volume: 270 liters Psdpfx Abotz Rqmj Ijrd - 2x side feedthroughs ∅ 125 mm - 1x side feedthrough ∅ 50 mm - Chamber is water-cooled Test Chamber Illumination: - LED strip 24 V, 6.8 W / 2x halogen bulbs 24 V, 50 W Electrical Connection: - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 26 KW - Rated current: 44 A - Refrigerants: R-452A and R-23 - Weight: approx. 980 kg Important Information for Buyers: For your safety, we carry out the following points on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) If you have further questions, feel free to contact us by phone.

Kondisi: bekas, Nabertherm Nabertherm N 2260/S Chamber Furnace with Wire Heating up to 1300 °C Technical Specifications – Nabertherm N 2260/S Feature / Value Model: Nabertherm N 2260/S Maximum Temperature: 1300 °C Voltage / Connection: 400 V, 3~ (three-phase), PE (protective earth) Heating Power: 75 kW Heating Zones: 5-sided (sides, floor, door, optionally ceiling) Internal Dimensions (Firing Chamber) Dimension / Value Width (w): 1,500 mm Depth (d): 1,000 mm Prodpfxew Ec Egs Ab Ijd Height (h): 1,720 mm Volume: approx. 2,580 liters External Dimensions (Overall Unit) Dimension / Value Length (L): 2,000 mm Width (W): 2,250 mm Height (H): 2,850 mm Weight: approx. 3,100 kg Condition: used Scope of delivery: (See picture) (Changes and errors in technical details reserved!) For further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), Vötsch Type: VBT 03/500 Air-cooled Temperature Test Chamber with Spray Device Technical Description: Data for Temperature Tests without Water: Temperature range: -30°C to +80°C Temperature deviation in stabilized state according to IEC 60068-3-5, depending on test chamber temperature: temporally ± 1 K Temperature change rate according to IEC 60068-3-5: Heating: approx. 2 K/min Cooling: approx. 2 K/min Data for Temperature Tests with Water: Temperature range: +5°C to +80°C Possible water level: -10 mm to 540 mm Water level = -10 mm: Water is below the insert grid Water level = 0 mm: Water is at the upper edge of the insert grid Data for Standard Spray Device: Number of spray nozzles: 6 Spray rate per nozzle: 0.5 l/min Data for Spray Device according to EN 539-2, Method B: Number of spray nozzles: 6 Spray rate per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray rate per additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for Water Tank with Pre-conditioning: Volume: approx. 2000 l Temperature range for pre-conditioning: +5°C to +40°C Temperature change durations: Cooling from +18°C to +5°C: approx. 15 h Heating from +15°C to +40°C: approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Feedthroughs: Prodpfxowc Nvge Ab Ijd 1 feedthrough ∅ 50 mm, installed on the left side Test chamber volume: approx. 500 liters Refrigerant: R-404a Electrical Connection: Rated voltage: 3/N/PE AC 400V ± 10%, 50 Hz Rated power: approx. 26 kW Rated current: approx. 44.0 A (neutral conductor loaded) Fusing: 63 A gG, to be provided on site Net weight: approx. 890 kg For your safety as a buyer, please note the following information! The following tasks are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Changes and errors in the technical data and information excepted!) If you have further questions, we will be happy to answer them by phone.

Kondisi: sangat baik (bekas), Here we offer a Weiss temperature chamber. Weiss Temperature Chamber with S!MCON / 32 control system, air-cooled (Refrigerant converted to R-452A) Test chamber volume: approx. 335 liters Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Operating data: Test chamber lighting: Halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 12.5 A, Rated power: 4.1 kW Customer-side fuse: 16 A slow-blow Pedpfeq U Sdnex Ab Iord Sound pressure level: Measured at 1m distance from the front, 1m height: 58 dB(A) Temperature test data: Temperature range: -72 to +180 °C Temporal temperature deviation (center of usable space): ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5): Heating: 3.0 K/min Cooling: 3.0 K/min Heat compensation max. 1500 W Refrigerant: R-452A / R-23 Weight: 585 kg Type: WT3-340/70 Important information for your safety as a buyer! The following measures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical details are subject to change and errors!) Further questions can gladly be answered by phone.

Kondisi: sangat baik (bekas), Weiss temperature chamber We are offering a Weiss temperature chamber. Weiss temperature chamber, air-cooled, with Weiss condenser cooler Test chamber volume: approx. 990 liters Specifications for temperature testing: Temperature range: -40°C to +180°C Temporal temperature deviation at chamber center: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5): - Heating: 4 K/min - Cooling: 3 K/min Thermal compensation: max. 4,500 W Feedthroughs installed as standard: Prjdjp Dun Ujpfx Ab Iod - R1: NW 125 mm - L1: NW 50 mm Dimensions: Test chamber dimensions (W x D x H): 1,100 mm x 950 mm x 950 mm Housing dimensions (W x D x H): 1,390 mm x 1,525 mm x 1,995 mm Maximum load (evenly distributed) on test chamber floor: 150 kg Per shelf: 50 kg Total rack load: 100 kg Operational specifications: Test chamber lighting: halogen bulb 24V, 50W Rated voltage: 3/N/PE AC 400 V ±10% 50 Hz Rated power: 11.5 kW Rated current: 22 A Heat emission for water-cooled cabinets: max. heat emission to ambient 1.3 kW Noise emission: Sound pressure level: approx. 64 dB(A) Refrigerant: (converted to R-452a) Weight: approx. 840 kg Type: WT11-1000/40 For your safety as a buyer, please note the following information: The following tasks are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Technical data and information subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Kondisi: sangat baik (bekas), Vötsch Model: VT 7060 Vötsch VT 7060 Temperature Chamber, 600 liters, with Simcon 32-net Chamber is air-cooled Reliable climate chamber for demanding environmental simulations Ideal for laboratory, R&D, and quality assurance. Device Description: For sale is a professional temperature chamber from the manufacturer Vötsch Industrietechnik, Model VT 7060 with SIMcon 32-net controller. This high-performance device is suitable for a wide range of demanding environmental simulations, from material testing and electronics testing to long-term climate stress tests. Technical Data (excerpt): Model: Vötsch VT 7060 Internal volume: approx. 600 liters Temperature range: –70°C to +180°C Temperature deviation at steady state: Temporal: ±0.1 K to ±0.5 K Spatial: ±0.5 K to ±2.0 K Temperature change rate (without test specimen): Heating: 4 K/min Psdpfx Aswybb Neb Iord Cooling: 3 K/min Controller: SIMcon 32-net with touch panel Interfaces: RS232, optional RS485/422 1 × feed-through NW 50 mm left 1 × feed-through NW 125 mm left 2 × feed-throughs NW 125 mm right External dimensions (approx.): Width 1090 × Height 1960 × Depth 1995 mm Internal dimensions (approx.): Width 800 × Height 800 × Depth 950 mm Nominal voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Nominal power: 9.1 kW Nominal current: 19.0 A Refrigerants: R 404A and R 23 Weight: approx. 675 kg For your safety as a buyer, the following measures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Shipping / Collection: Collection preferred Shipping via freight forwarder on pallet possible Europe-wide (shipping costs depending on effort) Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, all data without guarantee!) Further questions can be answered by phone.

Kondisi: sangat baik (bekas), Vötsch Model: VT³ 4100 Water-cooled Temperature Test Chamber S!MCON/32.NET (with Touch Panel) Features of this controller: - Color touchscreen with intuitive menu (typically 5.7" or larger) - Programming of temperature/humidity profiles with ramp and dwell times - Data logging & documentation (e.g., temperature cycle, alarms) - USB port for data export (CSV, optionally S!MPATI-compatible) - Network interface (Ethernet) for remote monitoring and control - User management with password protection - Interfaces: Volt-free contacts, optionally Modbus or Profibus VT³ 4100 – Technical Data (Temperature Test Chamber) - Test chamber volume: 990 liters - Temperature range: -40 °C to +180 °C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±1.5 K - Temperature gradient: 1 to 3 K - Rate of temperature change (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min - Maximum heat compensation power: 4500 W - Calibration points: +23 °C and +80 °C - Internal dimensions (W×D×H): 1100 × 950 × 950 mm - External dimensions (W×D×H): 1390 × 1955 × 1995 mm Feedthroughs: The chamber is equipped with feedthroughs on both the right and left sides. These allow for inserting measurement cables and test fixtures into the test space. - 1 x L1 DN 50 mm - 1 x R1 DN 125 mm - 3 x R1 DN 50 mm Electrical connection: 3/N/PE AC, 400V ±10%, 50Hz Prjdpfowyu H Eox Ab Ied Power consumption: 11.5 kW Rated current: 22 A Sound level: approx. 62 dB(A) Refrigerant: R452A Weight: 920 kg For your confidence as a buyer, the following work is performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If needed, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful verification, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Specifications subject to change and error!) We are happy to answer further questions by phone.

Kondisi: sangat baik (bekas), Espec Model: PSL-4KPH Espec Temperature and Climate Test Chamber, Air-Cooled There is a small dent at the top edge of the door (see photo). The door closes perfectly, the seal is intact, and the climate chamber operates flawlessly from a technical standpoint. The dent is purely cosmetic and has no impact on functionality, sealing, or control accuracy. Temperature range: -70°C to +150°C Humidity range: 20 to 98% r.H. Temperature/humidity fluctuation: ±0.3°C / ±2.5% r.H. Temperature/humidity stability: ±0.5°C / ±3% r.H. Heating/cooling rates & times: Heating rate: 5.0 °C/min Cooling rate: 3.0 °C/min Test chamber dimensions: Width 1000 mm x Height 1000 mm x Depth 800 mm External dimensions: Width 1410 mm x Height 1983 mm x Depth 1593 mm Prjdpfxjwz Er Ue Ab Isd Port with silicone plug: 100 mm With RS232 interface Test chamber volume: 800 liters Refrigerants: R-404A, R-508A Stainless steel design, AC 400 V 3-phase, 50Hz, 31 A Net weight approx. 720 kg Important safety information for buyers! The following procedures are carried out on our offered chambers in advance: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, chambers undergo a test run monitored with calibrated devices. Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data and information!) If you have further questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), Weiss temperature chamber Air-cooled We are offering a Weiss temperature chamber for sale. Weiss temperature chamber with S!MCON / 32 control system Test chamber volume: approx. 195 liters Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 450 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Operating data: Test chamber lighting: halogen bulb 24V, 50W Nominal voltage: 3/N / PE AC 400 V ± 10% 50 Hz Nominal current: 14 A Data for temperature testing: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 4 K/min Cooling: 4 K/min Heat compensation max.: 2300 W Refrigerant: R404 A, 2.5 kg Weight: 490 kg Model: WT3 - 180/40 Important safety information for buyers! The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant Podpfxogmhrfs Ab Iord 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone. Written orders are possible by email or fax.