Beli Tekan Karung bekas (4.629)

Kondisi: bekas, Tahun pembuatan: 1997, Pressing force: 1,000 t Gap width: 1,260 mm Stroke: 315 mm Stroke rate: 10, 21 – 42 spm Distance table/ram, large stroke at the top, adjustment at the top: 1,295 mm Table size: 1,250 x 800 mm Table height above floor: 670 mm Side frame pass-through: 830 mm Ejector pressure in table: 63 t Ejector stroke in table: 75 mm Ejector pressure in ram: 16 t Ejector stroke in ram: 23 mm Ram surface: 1,250 x 800 mm Ram adjustment: 20 mm Feed length, transfer: 0 – 250 mm Programmable closing stroke per rail: 0 – 140 mm Transfer unit stroke rate: 42 spm Drive power: 135.0 kW Weight: 120.0 t Required floor space (W x D x H): 5.9 x 4.8 x 7.95 m Fgjdpfx Ajvuukuedqsh Height above floor: 6.95 m Depth below floor: 1.0 m Equipped with DC drive, pneumatic clutch, motorized ram wedge adjustment, pneumatic ram weight compensation, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram locking mechanism, die clamping system for table and ram, motorized recirculating lubrication, oil pulse lubrication, grease lubrication. Press control: Siemens S5 - CNC 2-axis transfer system (manufacturer: Dreher, model STV-D 350/100-SO, year 2008), control Siemens S7 - Cleaning unit (manufacturer: Beyss, year 1989) As is and where is, WITHOUT commissioning, dismantled and stored The press was previously installed by the former owner in a soundproof cabin, which is NOT included in the scope of delivery. Video available from the seller prior to dismantling.

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), Unit Kontrol Merek: TRUMPF Fgedpfexd H Tcox Adqoh Perlengkapan Tambahan Sistem penjepit hidrolik Mesin press brake TRUMPF Trumabend V170 enam sumbu ini diproduksi tahun 1997. Memiliki gaya tekuk sebesar 1700 kN dan panjang tekuk maksimum 4060 mm. Jarak antar tiang adalah 3680 mm, dan dilengkapi dengan sistem penjepit hidrolik. Pertimbangkan kesempatan untuk membeli press brake TRUMPF Trumabend V170 ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Tekuk

Kondisi: bekas, Tahun pembuatan: 2013, Dimensi pers: 2500 x 1300 mm, jarak antar rak: 400 mm, suhu maks.: 130°C, tekanan spesifik: 22 N/cm², tekanan spesifik pada 80%: 27 N/cm², beban titik maksimum: 200 N/cm², tinggi kerja: 1100 mm, silinder: 4 unit, tekanan sistem maks.: 350 bar, total daya terpasang: 19,3 kW, kebutuhan ruang: 2910 x 1480 x 1870 mm, berat: 3900 kg. Lokasi stok: Pemasok. Fgodsw Sy E Nopfx Adqsh

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Pressing force: 40 t Bending length: 2100 mm Distance between uprights: 1600 mm Throat depth: 220 mm Installation height: approx. 300 mm Stroke length: approx. 100 mm Fedpou Agk Hsfx Adqjgh Working height: 880 mm Table width: 135 mm Number of strokes: approx. 9 / min Table width: approx. 240 mm Rapid approach speed: approx. 70 mm/s Working speed: approx. 13 mm/s Return speed: approx. 100 mm/s Drive power: 5.5 kW Dimensions (L x W x H): 2400 x 1400 x 2100 mm Weight: 3750 kg Accessories / Special Features: • As-new gooseneck upper tool, continuous, can be cut to any length as required • As-new universal die with various openings, 70 x 70 x 2100 mm • Motorized depth adjustment with digital readout • Manual backgauge, approx. 600 mm, with counter, SIKO make • Fast rapid advance and fast return • Two-hand operation, combined with foot switch + emergency stop • 2 backgauge fingers • Pressure regulation via potentiometer on control panel • Swiveling control panel • CE marking Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Kondisi: Pembawa suku cadang rusak (bekas), Fungsionalitas: belum diuji, Tahun pembuatan: 1983, nomor mesin/kendaraan: K2062, jenis kontrol: Kontrol CNC, lebar kerja: 4.000 mm, berat keseluruhan: 7.500 kg, daya: 7,5 kW (10,20 hp), tegangan masuk: 380 V, arus masuk: 16 A, frekuensi input: 50 Hz, Perlengkapan: perkakas atas, perkakas bawah, 1 Fedpfjxl D Dbsx Adqogh

Tahun pembuatan: 2025, Kondisi: baru, Our belt presses are equipped with two large pressing rollers that extend the pressing process, thereby ensuring particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tensioning and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press is equipped with an automatic brush cleaning system, so a high-pressure cleaner is not required. The belt is cleaned by six specially-developed water nozzles. For cleaning, only a compressor with 8 bar pressure capacity and a ½" water connection are required. Thanks to these special nozzles, water consumption is reduced, resulting in lower operating costs. Fgjdpfx Adov Sq S Nsqjh The open design enables quick and simple cleaning that can be completed in just a few minutes. Technical Information • Rated capacity: 950 kg/h • Power supply: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h 6 bar • IP65 electrical control cabinet • Juice yield: Up to 75% • Fully automatic and stepless belt speed control • User-friendly • Easy to clean • Lockable castor wheels Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Intake height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Optional: Juice collection tray ISW 100 Automatic juice discharge

Kondisi: bekas, Tahun pembuatan: 1988, Pressing force: 315 t Distance between uprights: 1350 mm Stroke: 600 mm Distance table/ram, max. stroke up, adjustment up: 1000 mm Table surface: 1200 x 1300 mm Table height above floor: 1245 mm Lateral upright clearance: 1250 mm Ram surface: 1200 x 1300 mm Advance speed: from 750 mm/s Return speed: 680 mm/s Working speed: 180 mm/s Oil capacity: 2000 l Drive power: 150.0 kW Weight: 35.0 t Space requirement (W x D x H): 3.3 x 3.3 x 5.5 m Fsdpfx Aevuk Rqodqegh Height above floor: 5.5 m Approved for manual loading operations in accordance with German accident prevention regulations (UVV) Equipped with oil-hydraulic drive, pressure/time and stroke-dependent control, hydraulic punching damping with motorized stroke limitation, hydraulic ram lock As is, ex location, NOT commissioned

Kondisi: bekas, Working width 4000 mm Working height 2600 mm Number of pressing cylinders 6 pcs. Dimensions (length/width/height) 5300 x 1250 x 3330 mm S&S Frame Press Type RP 2000, ----- CE version Robust frame-welded construction made of thick-walled special hollow profiles, sliding carriages and pressure beams with 50 mm hole grid. Continuous left-side abutment for width pressing, lower abutment on two levels. Vertical pressing cylinders on special pressure beams with single-handed quick adjustment Fgjdpeu Uvaljfx Adqjh with weight balance, height-adjustable in 50 mm hole grid, long sliding carriages ensure the permanent absorption of high pressing forces. Fast and smooth width adjustment via ball-bearing mounted carriage with central locking, fixation in 50 mm hole grid. Upper horizontal pressing cylinder infinitely height adjustable and fitted with weight compensation. Lower horizontal pressing cylinder with centering bores for the two abutment levels, with weight compensation. Abutment and pressure plate depth: 100 mm Pressure plate and support width: 130 mm Machine is electro-hydraulically controlled, equipped with 2 vertical pressing cylinders d = 50 mm, stroke 120 mm, double-acting, with weight compensation and single-handed quick adjustment, 2 horizontal pressing cylinders d = 40 mm, stroke 120 mm (double acting), with weight compensation; 2 manual control valves, pressure gauge, 1 pressure control valve from 20 to 125 bar corresponding to 400 to 2400 kg pressing pressure vertical, with 3 kW three-phase motor for 400 Volt, 50 Hz mains voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working size: 4000 mm x 2600 mm (length x height) Space requirement: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article ,00 pcs Central pressure beam with pressing cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article ,00 pcs Individual pressure regulation for central pressure beam, pressure regulation range up to max. 100 bar (for pressing of cross-bar windows) Article ,00 pcs Cross pressure device complete with pressing cylinder double-acting, weight compensation, pressure hose and shut-off valve Weight compensation on lower horizontal cylinder omitted Article ,00 pcs Individual pressure regulation for cross pressure device, pressure regulation range up to max. 100 bar (for pressing of cross-bar windows) Article ,00 pcs Shut-off valve for 3rd vertical cylinder Article ,00 pcs Shut-off valve for upper horizontal cylinder Article ,00 pcs Width compensation pad for pressing small frames to bridge the 1st pressure beam, including shut-off valve on 1st vertical cylinder Article ,00 pcs Basic equipment for counter profiles The required height increases by 100 mm Article All pressure plates and abutments covered with plastic Article ,00 pcs Triangle studio window pressing device consisting of: locking device for vertical pressure beams and 3 attachable, side-guided swing pressure plates Article ,00 pcs Double swing pressure plate for pointed (triangle) windows ----- Total price as specified above ex works: On request! -----

Kondisi: bekas, Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: M08E/9059, Nomor penawaran: M08E/9059 Jenis mesin: Press 5 matriks – 5 pukulan Info: pisau tertutup Merek: KIESERLING Tipe: K55 Tahun pembuatan: 1979/2002 Rentang diameter: 8–22 mm Jumlah matriks: 5 Jumlah tahap: 6 Kapasitas – pcs/menit: 105 Panjang batang di bawah kepala: 6–140 mm Panjang potongan: 175 mm Fodpfxsxlr I Ij Adqsgh Gaya tekan: 250 ton PKO: 30 mm Lokasi: Di Eropa

Kondisi: baru, Tahun pembuatan: 2025, Max. sheet thickness: 8 mm Press force: 200 t Bending length: 3,200 mm Fodpfxsxf Na Uo Adqegh Motor power: 15 kW Return speed: 105 mm/min Working speed: 9 mm/sec X-axis travel: 600 mm Max. opening height: 570 mm Controller: DELEM DA53T GERD WOLFF KANTO 200T CNC electro-hydraulic press brake CNC-Axis Accuracy 1) Machine Ram (Y1, Y2) – Synchronization Precision: The ram movement axes control bending depth and angle. The system consists of the CNC controller, two glass scales (Y1, Y2) installed on the machine table, electro-hydraulic proportional valves, and an amplifier. A closed-loop control system monitors and regulates the relative position between ram and table, as well as the speed and position of the ram. This ensures synchronization and highly accurate depth and angle control. Positioning accuracy: ±0.02 mm Repeatability: ±0.02 mm 2) Backgauge (X-Axis): The forward/backward movement of the X-axis sets the sheet dimension. The backgauge beam is driven by a servomotor and moves the traverse via ball screw and linear guide. The operation is stable and highly precise. Positioning accuracy: ±0.10 mm Repeatability: ±0.03 mm 3) Mechanical Crowning System (V-Axis): The crowning plate is motor-adjusted, forming an arc shape at the compensation points. These compensate for the elastic deformation of the machine table and ram, ensuring perfect angle consistency and workpiece straightness. Position sensors and CNC control provide precise regulation.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, - Model: T40756W1-Xa5C/F14F-GO16B-VPPX-XS15/523-SO28JR/N-F10 - Type: Hydraulic power unit (compact unit for industrial hydraulic applications) Fgodpfx Asuadbuedqsh - All technical specifications: - Material: Steel tank and frame for durability; standard hydraulic components - Voltage: 230/400 V AC (configurable) - Phases: 3-phase - Frequency: 50/60 Hz - Motor power: 0.75 kW - Pump displacement: 1.6 cc/rev - Flow rate: 2.208 litres/min (at 1380 rpm) - Relief pressure: 160 bar - Tank volume: 15 L - Medium: Hydraulic oil (mineral-based, HLP/DIN 51524 recommended) - Filtration: Standard inline filter (≥10 µm) - Operating temperature range: -20°C to +80°C (-4°F to +176°F) - Protection class: IP54 (motor); suitable for industrial environments - Standards: ISO 4413; CE-marked - Certification: CE; RoHS compliant - Features: Compact design for space saving; includes motor, pump, tank and relief valve; suitable for actuators and machinery - Dimensions: 360 mm length x 240 mm width x 550 mm height - Weight: 0.15 kg (approximate, based on compact unit) - Country of origin: Denmark - HS code: 8412.21 (hydraulic power engines and motors) LARGE STOCK AVAILABLE

Tahun pembuatan: 2025, Kondisi: baru, Our belt filter presses can be disassembled without tools within minutes and are easy to clean. Operation is intuitive, with effective belt cleaning provided by three spray nozzles and silicone wipers. This innovative technology ensures especially economical operation for juice extraction from fruit and vegetables. A high-pressure cleaner is not required, which further reduces electricity costs. All that is needed is a compressor with 8 bar pressure and a ½” water connection. • Fully automatic, stepless adjustment of belt speed • Easy to clean • Low maintenance requirements • Equipped with lockable caster wheels • Automatic belt tracking correction Technical Information Rated capacity: 350 kg/h Working width: 400 mm Juice yield: up to 75% Power requirement: 0.55 kW, 400 V, 16 A Material: Wnr. 1.4301, AISI 304 stainless steel Fgjdsv Sq Nbopfx Adqjh Compressed air requirement: 6 bar, approx. 50 L/h Dimensions: Length: 1080 mm Width: 1070 mm Height: 1320 mm Weight: 297 kg Optional: automatic juice discharge

Kondisi: bekas, Tahun pembuatan: 1965, Pressure: 160 t Stroke: 15 - 170 mm Strokes per minute: 15 - 40 Fgodpfsvuk S Usx Adqsh Upright width: 2050 / 1900 mm Shut height (stroke + ram adjustment at top): 690 mm Side column opening: 800 mm Table surface: 1600 x 800 mm Table height above floor: 900 mm Ram surface: 1620 x 700 mm Ram adjustment: 140 mm Drive power: 15.0 kW Weight: 24.0 t Space requirements approx. 3.3 x 2.3 x 5.3 m (LxWxH) Total height above floor: 4.8 m Height below floor: 0.5 m Only approved for use with safety tooling or fixed guarding in compliance with German accident prevention regulations (UVV) With steplessly adjustable drive, pneumatic clutch, pneumatic ram weight compensation, motorized ram adjustment, two-hand and foot operation As is, ex site, WITHOUT commissioning

Kondisi: baru, en-GB Fjdsd Ih H Sepfx Adqsgh

Tahun pembuatan: 2025, Kondisi: baru, Our belt presses are equipped with two large pressing rollers, which extend the pressing process and thus enable particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tensioning and automatic belt control further contribute to improving juice quality. The belt press features automatic brush cleaning, so a high-pressure cleaner is not required. Instead, the belt is efficiently washed by six specially developed water nozzles. For cleaning, a compressor with 8 bar output and a ½” water connection are sufficient. Thanks to the special nozzles, water consumption is reduced, which also lowers operating costs. The open design allows quick and easy cleaning of the unit, which can be carried out in just a few minutes. Technical Information • Rated capacity: 650 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: up to 75 % • Fully automatic and infinitely variable belt speed control • User-friendly • Easy to clean • Lockable castors Dimensions: Length: 2,230 mm Width: 1,250 mm Height: 1,250 mm Feed height: 1,240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 480 kg Optional: Juice collection tray ISW 100 Automatic juice discharge Fjdpfxsv Sq Rxj Adqegh

Kondisi: bekas, Tahun pembuatan: 1980, Pressing force: 50 t Column spacing: 1,750 mm Stroke: 500 mm Distance table/ram, max. stroke up, adjustment up: 800 mm Table surface: 1,700 x 750 mm Fgsdpfxevuk Ngs Adqoh Table height above floor: 800 mm Lateral column opening: 650 x 750 mm Ram surface: 1,700 x 750 mm Drive power: 11.0 kW Weight: 11.0 t Space requirements (LxWxH): 2.1 x 1.15 x 3.4 m Approved for manual loading/unloading in accordance with German accident prevention regulations (UVV) With electro-hydraulic drive, pressure/time and position dependent control No foundation pit required Can be offered either as-is (not commissioned) or alternatively with new Siemens S7-1500 F control.

Kondisi: baru, Working width: 3500 mm Fedpfxod Ih H Nj Adqogh Working height: 2300 mm Number of pressure cylinders: 4 pcs. S&S Frame Press Type T 35 – CE Version ----- Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment available with intermediate pressure beams, angled window device, counter profiles for single-piece production, and much more! Request our complete price list! Description: Robust frame welded construction made of thick-walled special hollow profiles, sliding carriages and pressure beams with 50 mm grid hole spacing. Continuous left-side counter-bearing for wide surface pressing, lower counter-bearing on 2 levels. Vertical pressing cylinders mounted on special pressure beams with single-hand quick adjustment and weight compensation, height adjustable in 50 mm grid holes. Long sliding carriages ensure permanently high pressing force absorption. Quick, smooth width adjustment by ball-bearing carriage with central locking; fixing in 50 mm raster. Upper horizontal pressing cylinder continuously height adjustable and equipped with weight compensation. Lower horizontal pressing cylinder with centering bores for the two counter-bearing levels, without weight compensation. Counter-bearing and pressure plate depth: 100 mm Pressure plate and support width: 130 mm. Machine is electro-hydraulically controlled, with 2 vertical pressing cylinders d = 60 mm, stroke 120 mm, double-acting, with weight compensation and single-hand quick setting; 2 horizontal pressing cylinders d = 40 mm, stroke 120 mm, double-acting, with weight compensation; 2 manual control valves, manometer, 1 pressure control valve from 20 to 130 bar, equivalent to 550 to 3500 kg pressing force vertically. Equipped with 3 kW three-phase motor for 400 Volt, 50 Hz operating voltage. Complete with electrical connection. Paint finish RAL 7035 light grey with RAL 7016 anthracite grey. (Technical data according to manufacturer's information, errors excepted. Image may show optional equipment!)

Kondisi: bekas, Tahun pembuatan: 1982, Press force 30 t Stroke 8 - 40 mm Strokes per minute 100 - 600 /min Fsdpfx Adevuk Hreqjgh Upright width 330 mm Installation height (stroke + ram adjustment at top) 280 mm Lateral upright passage 300 mm Table area 540 x 470 mm Through-hole in table 315 x 110 mm Table height above floor 1000 mm Ram area 250 mm Material width 120 mm Material thickness - 3.0 mm Feed length - 60 mm Drive power 5.5 kW Weight 2.6 t Space requirements approx. 1.5 x 1.2 x 2.2 m (LxWxH) Approved for automatic operation in accordance with German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch, manual stroke adjustment, manual ram adjustment, fixed table, mechanical roller feeder (Bruderer BBV 120/60) Table area 540 x 300 mm or 330 x 390 mm As is, where is, WITHOUT being put into operation

Kondisi: baru, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 units S&S electrohydraulic frame press type Super Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment available: central pressure beam, device for angled windows, counter profiles for single-part production, and much more! Please request our complete price list! Description: With automatic adjustment for mortise and tenon corner joints (other corner connections optional), CE-certified version Fjdod Rzc Rjpfx Adqsgh The only fully automatic, high-performance frame press, self-adapting and does not require pre-positioning of timber. Width and height adjustments are carried out automatically, without downtime, immediately after direct placement of workpieces into the pressing area. No repositioning of the timber is necessary. Base machine features heavy-duty, welded frame construction, made from oversized, thick-walled special profiles. Guide rails for pressing corners are precision-machined for minimum wear on the pressure beams. Continuous abutment for width pressing on the stop side, unbendable design, mounted on the base frame. Continuous abutment below, highly torsion-resistant design, connected to the base frame and machine interface. Infeed height: 500 mm. All abutments are precision adjustable for absolute angular accuracy and long-term precision. Right sliding carriage with fast, motorized width adjustment, ensuring parallel travel, including automatic hydraulic locking: Central drive for horizontal and vertical size adjustment, with high input and adjustment speed and automatic width and height adjustment (optoelectronic control). 2 vertical double-acting pressing cylinders, piston diameter 50 mm, 250 mm stroke, pressure force adjustable from 400 to 2,000 kg. 2 horizontal double-acting pressing cylinders, piston diameter 40 mm, 80 mm stroke, pressure force adjustable from 250 to 1,250 kg. Upper right pressing corners are heavy-duty, milled type, with automatic corner adjustment. Free-floating press corners Contact surfaces feature glue-repellent finish. Abutment and pressure plate depth: 100 mm. 8-way holding and positioning system for fully loose placement of all single timber parts in the pressing area (no prior stacking or plugging required). Each frame component is held and positioned at two points. Automatic lift-up function enables ergonomic placement of the upper cross member even with tall frames, at an operator-friendly height. Improved work safety through ground-level operation—no ladders or steps required. All individual frame timbers are placed directly into the pressing area. Program selection options: manual motorized via pushbutton, fully automatic via optoelectronic size adjustment, including automatic pressing cycle in tandem with a safety light barrier. Automatic, cycle-controlled pressing by impulse signal: vertical pressing – release – horizontal pressing – release – vertical/ horizontal pressing. Control cabinet conveniently mounted to the left on the base frame. Fast, optoelectronic size adjustment. Compact hydraulic system adjustable from 20 to 100 bar. Freely programmable, electric hand controller for efficient operation, particularly suitable for large and complex frame designs (

Kondisi: bekas, Tahun pembuatan: 2008, Pressing force: 200 t Frame opening: 1050 mm Stroke: 150 mm Distance table/ram, max. stroke up, adj. up: 450 mm Fsdpfxevut Nij Adqegh Table surface: 1000 x 1200 mm Table height above floor: 850 mm Lateral frame passage: 500 mm Ram surface: 1050 x 870 mm Downward speed: from 300 mm/s Upward speed: 300 mm/s Working speed: 18 - 36 mm/s Drive power: 37.0 kW Weight: 16.0 t Space requirements (W x D x H): 4.0 x 3.6 x 3.4 m Year of manufacture: 1988 - 2008, NEW Siemens S7 control system Approved for manual loading operations according to CE standards with oil-hydraulic drive, hydraulic cut impact damping, two-hand control No foundation pit required Can be offered as-is, either without or with commissioning

Kondisi: bekas, Working width: 3600 mm Working height: 2600 mm Number of pressing cylinders: 5 units Loading dimensions (L x W x H): 4400 x 1150 x 2970 mm Weight: 3000 kg Schafberger + Sprödhuber Frame Press Bavaria ----- Machine will be overhauled by us prior to delivery With automatic pressing cycle + manual control For corner joints with mortise and tenon CE version Base machine in heavy-duty welded frame construction, with thick-walled special hollow sections. Guide rails for the pressure beams at the press corners manufactured for low wear. Quick and smooth manual width adjustment Fgjdsw T Un Ujpfx Adqeh via ball bearing carriage, locking in detent system. Height adjustment and pressing via long-stroke cylinders in a single work cycle. Right-side press corners with integrated horizontal cylinders, thus no vertical positioning of the horizontal pressing cylinders necessary, which avoids cylinder collisions. The lower abutments can be set at multiple positions to the most favorable insertion height in each case. 3 vertical pressing cylinders, double-acting, stroke adapted to working height, 2 horizontal pressing cylinders, double-acting Abutment and pressure plate depth: 80 mm Working size: Length x Height = approx. 3,600 mm x 2,600 mm Required space/loading dimensions: approx. 4,400 mm x 1,150 mm x 2,970 mm (Length x Width x Height) Option: ALWA pressing aids for angled windows (Technical data according to manufacturer's specifications – subject to change! Images may differ from original, prices net, plus VAT (domestic))

Kondisi: bekas, Working width: 3,550 mm Working height: 2,250 mm Number of pressing cylinders: 5 pcs. Loading dimensions (L x W x H): 4,500 x 900 x 2,600 mm Hess Speedy Frame Press ----- Machine has been function-tested Insertion dimension / max. pressing length: 3,550 mm Insertion dimension / max. pressing height: 2,250 mm Sliding carriage for width adjustment, locking every 50 mm double-hole grid system electrical height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the counter plates selectable in 4 positions Fgsdpfx Adovn U Ruoqeh 3 vertical pressing cylinders, stroke 1,000 mm Pressing force per cylinder: 2,000 kN / 20,000 N 2 horizontal pressing cylinders, stroke 80 mm Pressing force per cylinder: 1,250 kN / 12,500 N Pressure plate depth: 100 mm; width: 140 mm Cylinder/Counter support fixing grid: 50 mm Center pressure beam with shut-off valve Final pressure cut-off and post-press regulation Control and pressing process operated via momentary contact switches Adjustable pressing pressure: min. 25 – max. 160 bar Electrical connection: 2.2 kW / 400V Control system for slanted window bonding 2 oscillating pressure plates, 45 degrees Machine dimensions (W=4,500 mm, D=900 mm, H=2,600 mm) Weight: approx. 1,800 kg Photos are original, video is not original and shows an identical model. (Technical data according to manufacturer – without guarantee!)

Kondisi: bekas, en-001 Fsdpfev D Rg Rjx Adqjgh

Kondisi: bekas, Working width 3,550 mm Working height 2,250 mm Fedpfxovn U Rnj Adqjgh Number of pressing cylinders 5 units Loading dimensions L x W x H: 4,500 x 900 x 2,600 mm Hess Speedy Frame Press ----- Press overhauled Maximum Insertion / Pressing Length: 3,550 mm Maximum Insertion / Pressing Height: 2,250 mm Sliding carriage for width adjustment, locking in 50 mm increments double-hole grid system Electric height adjustment of long-stroke cylinders (hydraulic) Support plate insertion height selectable in 4 positions 3 vertical pressure cylinders, stroke 1,000 mm Pressing force per cylinder: 2,000 kN / 20,000 N 2 horizontal pressure cylinders, stroke 80 mm Pressing force per cylinder: 1,250 kN / 12,500 N Pressure plate depth: 100 mm, width 140 mm Cylinder fixation / support grid: 50 mm Central pressure beam with shut-off valve Final pressure shut-off and post-pressure regulation Operation and press cycle via push-button control Adjustable pressing pressure: min. 25 – max. 160 bar Electrical connection: 2.2 kW / 400 V Control for slanted window bonding 2 swinging pressure plates, 45 degrees Machine dimensions: W=4,500 mm, D=900 mm, H=2,600 mm Weight approx. 1,800 kg Image and video are not original, showing an identical model (T echnical data according to manufacturer – without guarantee!)

Kondisi: baru, Working width 4500 mm Working height 3000 mm Number of pressing cylinders 6 pcs. Dimensions (length/width/height) 5500x1400x3550 mm Weight 3000 kg S&S Frame Press Bavaria 2000 L ----- With automatic pressing cycle and manual control for corner joints (tenon & mortise and dowel joints/mortised tenon), switchable via selector switch on the control cabinet. Equipped as standard for optional use of counter profiles if sashes are folded on the loose part. CE-compliant version Base machine in extra-strong welded frame construction, with thick-walled special hollow sections. Guide rails for the pressing beams at the press corners are finished for wear resistance. Fast, smooth manual width adjustment via ball-bearing mounted carriage, locking with 50 mm hole grid; optionally available with motorized width adjustment and hydraulic clamping (at extra cost). Fgjdpswg Hr Tjfx Adqjh Height adjustment and pressing via long-stroke cylinders in a single working cycle. Right press corners with integrated horizontal cylinders eliminate the need for vertical positioning of the horizontal cylinders, avoiding cylinder collisions. The lower counter-support can be set to the optimal feeding height in several positions. 3 kW compact hydraulic power unit with integrated control block, infinitely variable pressure adjustment from 20 to 120 bar, manometer included. Operation via push buttons with separate control circuits for vertical and horizontal pressing cylinders, mounted on a freely movable control panel. 2 double-acting vertical pressing cylinders, strokes tailored to working height, piston diameter 60 mm Max. pressing force per cylinder: 2100 kg 2 double-acting horizontal pressing cylinders, 80 mm stroke, piston diameter 40 mm Max. pressing force per cylinder: 1250 kg Counter-support and pressing plate depth: 100 mm Control cabinet at the machine base (left), 400 Volt, 50 Hz Machine supplied with plug, ready for connection: 16 A Finish: RAL 7035 light grey with RAL 7016 anthracite grey Working size: Length x Height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (Length x Height) Required space: 5,500 mm x 1,400 mm x 3,550 mm (L x W x H) Article: Mid pressure beam, complete with pressing cylinder, pressure hose and shut-off valve, up to 2,750 mm height Note: actual working height: 3,000 mm Article: Individual pressure control for mid pressure beam, Pressure adjustment range: up to 100 bar (For pressing muntin bar windows) Article: Continuously height-adjustable cross pressure device, complete with pressing cylinder and counter-support, throttle and shut-off valve Article: Individual pressure control for cross pressure device Pressure adjustment range: up to 100 bar (For pressing muntin bar windows) Article: Shut-off valve on 3rd vertical cylinder Article: Shut-off valve on upper horizontal cylinder Article: Angled window control for vertical cylinders Article: Clip-on swivelling pressure plates for pressing up to 60 degrees Article: Double swivelling pressure plate for pointed windows (triangle) Article: Extension for swinging pressure...