Beli Tornos Deco 13 bekas (124)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, kecepatan spindel (maks.): 12.000 rpm, Diameter batang (maks.): 13 mm, jumlah sumbu: 6, This 6-axis TORNOS Deco 13 b was manufactured in 2004. It features a maximum bar diameter of 13 mm and a spindle speed range of 100 - 12,000 rpm. The machine is equipped with a linear tooling system with 6 tool positions and offers full machining capabilities for turning, drilling, tapping, and threading. If you are looking for a high-quality lathe, you should consider the TORNOS Deco 13 b Swiss Type Lathe, which we are offering for sale. Contact us for further details. • Capacity: • Maximum bar diameter: 13 mm • Axes: • Number of axes: 6 (X1, Y1, Z1, X2, Y2, Z2) • Main spindle (S1): • Max. bar passage: 16 mm • Recommended minimum bar diameter: 3 mm • Maximum workpiece length: 160 mm • Collet type: Schaublin F20 • Sub spindle (S2): • Max. workpiece diameter: 16 mm • Maximum workpiece length (secondary machining): 160 mm • Spindle speed: 100-12,000 rpm • Clamping force: 730 daN • Axis travels: • X1: 35 mm, Y1: 158 mm, Z1: 187 mm • X2: 118 mm, Y2: 160 mm, Z2: 174 mm • Traverse speeds: • Max. axis speed: 20 m/min • Guide bushing: • Max. bar passage: 16 mm • Tooling system: • Linear tooling system (front + rear) • Number of tool positions: 6 (3 axial + 3 cross) Lsdeywlhbepfx Afieaa • Distance between tools: 38 mm • Max. live tools: up to 3 • Driven tools (S3): • Max. speed: 8,000 rpm • Power: up to 1.1 kW • Drilling capacity: up to 8-10 mm • Tapping capacity: M6-M8 • Secondary operations: • 3 working positions • Full machining (turning, drilling, tapping, threading) • Cooling system: • Oil capacity: 200 L • Chip container: approx. 100 L Additional Equipment • Bar feeder (integrated): • Maximum bar length: 3.3 / 3.85 / 4.2 m • Minimum bar length: 1.2 m • Bar diameter range: 3-16 mm • Parts conveyor • Oil bath system • RS232 interface • Work area lighting Technical Specification Counter Spindle: Yes Driven Tools: Yes

Kondisi: bekas, TECHNICAL SPECIFICATIONS - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Max. machinable length: 180 mm - Spindle speed: 12,000 rpm - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 12,000 rpm - Minimum C-axis resolution: 0.1° - Number of tool holders: 2 TOOL HOLDER 1 - Number of positions: 6 - Number of powered positions: 3 - Powered tool speed: 8,000 rpm Ljdeuhayiopfx Afisaa TOOL HOLDER 2 - Number of positions: 6 - Number of powered positions: 3 - Powered tool speed: 8,000 rpm FRONT ATTACHMENT - Number of positions: 4 - Number of powered positions: 4 - Powered tool speed: 8,000 rpm BACK MACHINING UNIT - Number of positions: 6 ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Operating hours: 53,892 h EQUIPMENT - Control: FANUC PNC DECO - Power-driven tool motorization on: S2, S5 - Powered guide bushing - Parts catcher - Parts ejector - Coolant tank

Kondisi: bekas, TECHNICAL DATA - Number of axes: 6 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Max. machinable length: 160 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° Ljdpfx Afsuhaz Tjijaa SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 0.1° - Number of tool holders: 1 TOOL HOLDER 1 - Number of positions: 8 - Number of powered positions: 3 - Driven tool speed: 8,000 rpm FRONT TOOL POST - Number of positions: 3 SUB OPERATION - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 1100 x 7270 mm - Machine height: 1950 mm - Machine weight: 3000 kg OPERATING HOURS - Power-on hours: 22,834 h ACCESSORIES - Control system: Fanuc PNS DECO - Driven guide bushing - Parts catcher - Parts conveyor belt - Parts ejector - Coolant tank - Bar loader: ROBOBAR SSF

Kondisi: bekas, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Max. machining length: 180 mm - Spindle speed: 12,000 rpm - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 16 mm Lasdpfx Afsuhaypeija - Spindle speed: 12,000 rpm - Minimum C-axis resolution: 0.1° - Number of tool holders: 2 TOOL HOLDER 1 - Number of stations: 6 - Number of driven stations: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of stations: 6 - Number of driven stations: 3 - Driven tool speed: 8,000 rpm FRONT TOOL POST - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 8,000 rpm BACK WORKING - Number of stations: 6 ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Operating hours: 30,161 h ACCESSORIES - CNC Control: FANUC PNC DECO - Drive for powered tools at: S2, S3, S5 - Powered guide bushing - Parts catcher - Parts ejector - Coolant tank

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7213, Country of manufacture: Switzerland Net weight: approx. 2,550 kg Customs tariff code: 8458.11 20 Dimensions: 2,000 x 1,260 x 1,950 mm TECHNICAL SPECIFICATIONS 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation - 1 sliding headstock: Z1, S1 - 2 independent vertical tool carriers: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent secondary-operation rotating axis: X4, S5 Bar feed position: right of operator Machine axis height: 1,100 mm Main spindle stroke: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Maximum workpiece length Guide bushing machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bushing: fixed / rotating Collet for guide bushing, type: Meister 605 Number of combined side tools: fixed: 2 x 5 / rotating: 3 + 3 Number of combined front tools: fixed: 4 / rotating: 3 Number of combined rear tools: fixed: 3 + 3 / rotating: 3 + 3 Lasdow T Tcwepfx Afija Tool section: 12 x 12 mm Rotary tool holder collet: standard ESX 20 Bar feeder: yes Parts catcher: yes All technical data provided without obligation and subject to errors or omissions.

Kondisi: bekas, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Max. machining length: 184 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.1° TOOL HOLDER 1 - Number of positions: 5 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 Lajdpfxeuhhp Sj Afisa - Number of positions: 5 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm FRONT UNIT - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 8,000 rpm SUBSEQUENT MACHINING - Number of positions: 6 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 14 kVA MACHINE HOURS - Operating hours: 54,035 [hours] EQUIPMENT - Control: Fanuc PNC DECO - Driven tool motorization at: S2, S3, S5, S6 - Driven guide bushing - Parts catcher - Coolant tank with high-pressure pump - Bar loader: IEMCA GENIUS 118 / 32LL - Coolant container: MARKSA CSW 200 - Fire extinguishing system* NB: Functionality not guaranteed. Must be checked by a qualified company engaged by the buyer. - Number of driven tool holders: 3

Kondisi: bekas, CNC sliding headstock automatic lathe TORNOS DECO 13A Laodeuhhp Ejpfx Afiea

Kondisi: bekas, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Max. machining length: 184 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.1° COUNTER SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.1° TOOL HOLDER 1 - Number of positions: 5 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm FRONT TOOL STATION - Number of positions: 4 - Number of driven positions: 4 Ljdpfouha D Ujx Afisaa - Driven tool speed: 8,000 rpm BACK MACHINING - Number of positions: 6 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power requirement: 14 kVA MACHINE HOURS - Operating hours: 42,762 h EQUIPMENT - Control: Fanuc PNC DECO - Driven tool motorization at: S2, S3, S5, S6 - Driven guide bushing - Parts catcher - Coolant tank * with high-pressure pump - Bar feeder: Iemca Genius 118/32 LL - Coolant container

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2560460122, Tornos Swiss GT13/6 – Sliding Headstock Automatic Lathe CNC Control FANUC 31i-B, 6 axes, capacity 13 mm Base Machine Equipment: - 6 linear axes - Independent main and sub spindle - Synchronously rotating guide bush - Option for operation without guide bush - C axis for main and sub spindle Ljdpfxoyzigce Afieaa - Adjustable pneumatic ejector incl. sub spindle coolant cleaning - 3-color signal tower (yellow, red, green) - Centralized lubrication - Electrical interface for Tornos bar feeder - Oil mist extraction interface - Fire extinguishing system interface - Interface for customer M-function (6 inputs and 6 outputs) - Compliance with CE and EMC standards Main Spindle: - Max. speed: 15,000 rpm - Collet adaptation for F16 collets (76-1076) - Max. bar diameter without preparation: 10 mm - Max. bar diameter with preparation: 13 mm - C1 axis function Guide Bush: - Max. speed: 15,000 rpm - Max. diameter of synchronously rotating guide bush: 13 mm (with integrated motor), Guide bush type: B (853) - Max. workpiece length in one clamping: 180 mm - Adaptation kit for operation without guide bush (max. travel: 30 mm) Main Operation Tooling System: - Tool holder for 5 turning tools 12x12 mm on the front of the carrier - Tool holder for 4 turning tools 12x12 mm on the rear of the carrier - S11 tool drive (10,000 rpm) for rotating tools mounted at the front of the X1/Y1 carrier - 1 drive module for cross-operation with 3 spindles for ESX 16 collets (2x 10,000 rpm, 1x 6,250 rpm) - S21 tool drive (6,000 rpm) for up to 2 driven attachments mounted at the rear of the X1/Y1 carrier (driven units not included) - Tool holder with 4 holes Ø 22 mm for fixed finishing tools Sub Spindle: - Max. speed: 15,000 rpm - Collet adaptation for F16 collets (76-1076), Max. Ø capacity: 13 mm - C4 axis function Tooling System for Sub Operations: - Base holder for 8 rear tools; on the 4 upper positions, rotating and/or fixed tools can be mounted (rotating tools not included) - 4 holders for ESX 16 collets in the 4 lower positions - 2 fixed holders with Ø 22 mm bore (for upper positions) - S51 tool drive (6,000 rpm) for driving rear tools (max. 4 rotating tools) ----- Attractive Offer – Flexible & Worry-Free We offer not only a high-quality product, but also tailored financing solutions to suit your needs. Whether it’s down payment, installment plans, or custom financing models – together, we’ll find the right solution. Upon request, we also take care of the complete transport logistics. From planning to reliable delivery, we ensure a smooth and on-time process so you don't have to worry about a thing.

Kondisi: sangat baik (bekas), Holder alat hampir baru untuk DECO 20 - DECO 26 3 buah holder alat tetap TORNOS untuk X1Y1; X2Y2; X4Y4 ----- Laodpey Apn Ajfx Afiea - Holder pahat bubut untuk 16x16 mm: - Harga per holder €180,00/unit untuk DECO2000 ø20 & 25mm DECO 20 dan DECO 26 3x dengan pelat depan 1x tanpa pelat depan ----- Pengiriman dalam Jerman €12,00 Pengiriman dalam EU €25,00 Selain itu, kami juga memiliki 6 sisipan reduksi spindle: digunakan pada DECO 26mm Diameter dalam: 8,0mm; 12,0mm; 21,0mm; 3x 26mm Diameter luar: 30mm, ulir M32x1,5, panjang sekitar 360mm Diameter flensa luar 45mm x 9mm, 4 lubang ulir M4 2x alur 8 mm Harga spesial untuk semua 6 reduksi termasuk ongkir €380,00 Atas permintaan, kami dengan senang hati mengirim foto—silakan berikan alamat email Anda.

Kondisi: bekas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 10 mm - Travel: 66 mm - Spindle speed: 16,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° BUSH HOLDER 1 - Number of positions: 4 BUSH HOLDER 2 - Number of positions: 4 - Number of powered positions: 3 - Driven tool speed: 12,000 rpm FRONT ATTACHMENT - Number of positions: 3 - Number of powered positions: 3 - Driven tool speed: 12,000 rpm SUB MACHINING - Number of positions: 4 - Number of powered positions: 4 - Driven tool speed: 9,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 1,700 x 1,010 mm - Machine height: 2,000 mm - Machine weight: 1,500 kg Lasdpey Aprnsfx Afisa EQUIPMENT - Control: Fanuc - Driven tool motorization at: S2, S3, S5 - Powered guide bushing - Parts ejector - Coolant tank - Bar feeder: LNS TRYTON

Kondisi: bekas, en-20240616-01 Ledpfoy Aprhox Afijaa

Kondisi: bekas, en-001 Lajdpfxoy Aprbe Afioa

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), t1 Lajdpsyypmysfx Afisa

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Diameter batang (maks.): 10 mm, produsen pengendali: FANUC, model controller: 16i-TB, jumlah sumbu: 9, Swiss lathe from 2006. This TORNOS DECO 10a comes equipped with an automatic, integrated bar feeder allowing for a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. It features a Robobar SSF 3m loading magazine and is fitted with a FANUC 16i-TB control unit. If you are looking for a high-quality lathe, consider the TORNOS DECO 10a we have for sale. Contact us for further details. • Overhauled in 2016: • Machine, ball screws (replaced if required), linear guides, guide bushings, main spindle and counter spindle checked • Complete cleaning • Maintenance according to Block 3 carried out • All drive belts replaced • Barriers, relays, filter mats replaced • Reference points adjusted • Configuration/Features: • Sliding headstock • Oriented spindle stop (S1) • Independent counter spindle (S4) • 9 axes with C1 and C4 and Transmit Laedpeytcaljfx Afioa • 1 cross-slide with 4 tool stations • Tool breakage detection sensor Additional equipment: • Automatic, integrated bar feeder (oil-bath) TORNOS-BECHLER type SSF-210, equipped with Robobar SSF 3m loading magazine • Max. bar length: 3.2 m • Bar passage: min. 2 mm, max. 10 mm • Max. diameter without bar preparation: 8 mm (without collet) • "HYBRIDE 10+5" drum with: • 14 guide holes for 1–4 mm • 14 guide holes for 4.1–10 mm • Loading magazine with drum • Integrated 25-litre hydraulic unit with filter • Front and rear stabilizer foot, centre height 1,100 mm • Electrical control cabinet (circuit diagram 112.20.300) • Motor voltage 400 V, control voltage 24 V • Colour: Anthracite RAL 7016 / Grey RAL 7035 Technical Specification Counter Spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, Diameter batang (maks.): 7 mm, jumlah sumbu: 9, Swiss lathe from the year 2000. This TORNOS Deco 10a features a movable headstock, an independent counter spindle, and a pivoting workpiece holder. It comes equipped with a magazine loader with a drum and a lubrication device for the guide bushings. If you are looking for a high-quality lathe, consider the TORNOS Deco 10a, which we have for sale. Contact us for further details. • Movable headstock • Direction-dependent spindle stop S1 • Cross slide with 4 tool holders T11-T24 featuring vertical and horizontal travel • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for the guide bush with filter • S2 motorization • Integrated 25-liter hydraulic unit with filter • Electrical control cabinet • Motor voltage 400 V • Control voltage 24 V • Drive motor n = 12,000 rpm Additional Equipment • Magazine loader with drum (bar feeder) • "HYBRID 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars (no bar preparation up to 8 mm) • 3 presettable turning tool holders • 4 fixed tool holders • Thread cutting device for collet ESX 12 • Front and rear support feet, center height 1100 mm Technical Specification Counter Spindle No Lodoyr Nflspfx Afisaa

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, produsen pengendali: FANUC, model controller: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar loader with a maximum bar length of 3.2 m and a bar capacity of 2 to 10 mm. The machine is equipped with a Robobar SSF 3m magazine loader and a FANUC 16i-TB control unit, ensuring precise and efficient operation. Ideally suited for complex Swiss-type turning operations. Contact us for more details about this machine. 2 similar machines available! Additional information: • Maximum bar length: 3200 mm • Bar capacity: Minimum 2 mm, Maximum 10 mm • Maximum diameter without preparation: 8 mm (without collet) • Motor voltage: 400 V • Control voltage: 24 V • Independent sub-spindle (S4) • FANUC 16i-TB control • 1 cross slide with 4 tool holders • Tool breakage detection sensor • Center height: 1100 mm • Automatic and integrated oil-bath bar loader • Robobar SSF 3m magazine loader • Front and rear support feet • "HYBRID 10+5" drum with 14 guide holes for 1-4 mm and 14 guide holes for bars 4.1-10 mm without bar preparation up to 8 mm • Electrical control cabinet • Integrated 25-liter hydraulic unit with filter • Movable headstock Laedpfx Afjx D Dlijiea • Oriented spindle stop Optional: Extensive set of measuring devices

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Diameter batang (maks.): 10 mm, jumlah sumbu: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It is equipped with a drum-type bar loader, an integrated hydraulic unit, and supports both at the front and rear with a center height of 1100 mm. The machine features a movable headstock, a directional spindle stop, and a cross slide with tool holders. It is ideally suited for precision turning operations and operates with AC drive motors and an absolute measurement system. Contact us for further information regarding this machine. Overhauled in 2017, with two additional similar machines available (both overhauled in 2018) 2017 Overhaul Details: Standard overhaul package: Block III maintenance, cleaning, and recommissioning. Overhaul of the guide bushing and overhaul of spindles S1, S2, and S4. Replacement of all ball screws, including bearings, and the guides on all axes. Replacement of coolant pump, all coolant lines, and the coolant sensor. Replacement of wipers on the cross slides. Replacement of all pneumatic lines and valves. Replacement of machine lighting, viewing panels, external fan, fan cable, and keyboard. Additional options (special services): The guide bushing was completely replaced (not just overhauled). New central lubricating system installed. Replacement of bellows coupling, external encoders, and monitor. Replacement of the control and amplifier fans. Upon recommissioning, the 'Spindle Positioning S4' option was also activated and the bar loader was set up. Additional Information • Maximum bar length: 3040 mm • Electrical control cabinet • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Movable headstock • Cross slide with 4 tool holders T11-T14, with vertical and horizontal movement • Absolute measurement system • 9 axes with C1 and C4 • Drum bar loader 'HYBRIDE 10+5' • 14 guide tubes for 1–4 mm bars • 14 guide tubes for 4.1–10 mm bars, without bar preparation up to 8 mm Laedpfxsx D D Ikj Afisa • Tryton collet • 2 different hybrid drums • Direction-dependent spindle stop S1 • Can be equipped with Robobar SSF 3 m bar loader Technical Specification Counter spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Diameter batang (maks.): 10 mm, jumlah sumbu: 9, This TORNOS DECO 10a was manufactured in 2003. It features a movable headstock, a direction-dependent spindle stop, and several cross slides with tool holders for versatile machining operations. Equipped with a counter spindle and programming software available in five languages, it is ideal for complex turning applications. It includes interfaces for bar feeders and tool breakage detection. Further details on this machine are available upon request. Additional Information • Programming software TB-DBCO Version 6: Stand-alone product, configuration available in 5 languages (French, German, English, Italian, Spanish) • Programming language: ISO programming language • Movable headstock: Axes S1/Z1, n = 16,000 rpm, collet F13 • Spindle stop: Direction-dependent spindle stop S1 (programming step 0.1 degree) • Cross slides: • 1 cross slide with 4 tool positions (axes X1 and Y1) • 1 cross slide with 3 tool holders (axes Z3 and X3) • 1 cross slide with horizontal and vertical movement (axes Z4 and X4) • Pneumatic cylinders: 3 independent cylinders for rapid positioning • Counter spindle: Independent (S4), n = 12,000 rpm, collet F13 • Cross-slide support options: • Pre-settable turning tool holder, long type, 8x8 mm cross-section • Main spindle rotation direction: right-handed • S2 drive (electrical/mechanical) for powered attachments on the X2-Y2 linear tool carrier • Powered end drilling/milling unit: Max. speed 12,000 rpm • Cross drilling/milling/tapping unit for collet BSX 12 • Sensor: Tool breakage detection with MIDI-DETECTOR type, mini-toggle probe MINI-DETECTOR type, electrical interface, pneumatic control devices • Interface: Adaption for an LNS bar feeder Lasdpfx Afjx D Dm Hoioa • Spindle speed: n = 16,000 rpm indicates the machine has a moderate spindle speed capacity • Additional: Comprehensive set of measuring devices Technical Specification Counter Spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Diameter batang (maks.): 10 mm, jumlah sumbu: 9, This TORNOS DECO 10a was manufactured in 2010. It features a sliding headstock, direction-dependent spindle stop, and cross slides equipped with tool holders. The machine is equipped with an independent counter spindle, a swiveling workpiece holder, and a lubrication system. Additional equipment includes a bar feeder, an integrated hydraulic unit, and an electrical control cabinet. If you are looking for a high-quality lathe, the TORNOS DECO 10a we are offering for sale is an excellent choice. Please contact us for further information. Additional Information: • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • 3 presettable turning tool holders Laodpfx Afex D Dmtoioa • 4 stationary tool holders • Sliding headstock • Direction-dependent spindle stop S1 • Independent counter spindle • Swiveling workpiece holder at the counter spindle • Lubrication device for guide bushings with filter • Thread cutting device for collet chuck ESX 12 • Drum-type bar feeder • Integrated 25-liter hydraulic unit with filter • Support foot front/rear, center height 1100 mm • "HYBRID 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, no bar preparation required up to 8 mm • Electrical control cabinet • Motor voltage 400 V • Control voltage 24 V Optional: Comprehensive gauge package Technical Specification: Counter Spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, kecepatan spindel (maks.): 12.000 rpm, Diameter batang (maks.): 10 mm, jumlah sumbu: 9, This Swiss lathe TORNOS DECO 2000 was manufactured in 2000. It features a movable headstock, a direction-dependent spindle stop, and cross slides with tool holders. The machine is equipped with an independent counter spindle, a lubrication system, and a drum bar loader. It comes with a 'HYBRIDE 10+5' drum for bar stock up to 10 mm and an integrated hydraulic unit. For more information about this machine, please contact us. Additional Information • Electrical control cabinet • Motor voltage: 400 V • Control voltage: 24 V • Movable headstock • Cross slides with 4 tool stations T11-T24 with vertical and horizontal movement • Swiveling workpiece holder at the counter spindle • Direction-dependent spindle stop S1 • 3 presettable turning tool holders • 4 fixed tool holders • 'HYBRIDE 10+5' drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, no bar preparation required up to 8 mm • Independent counter spindle • Thread cutting device for collet ESX 12 Ljdpsx D Dmysfx Afioaa • Lubrication device for guide bush with filter • Drum-type bar loader • Integrated 25-liter hydraulic power unit with filter • Front and rear support feet, center height 1100 mm Optional: Comprehensive measuring device package Technical Specification Counter Spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Diameter batang (maks.): 10 mm, jumlah sumbu: 7, This TORNOS DECO 10e was manufactured in 2007. A Swiss lathe featuring a sliding headstock, direction-dependent spindle stop, and multiple tool holders for versatile operations. It includes an independent sub-spindle, a lubrication unit, and a drum magazine. Ideal for precision turning operations with a maximum bar capacity of 10 mm. Take advantage of this opportunity to purchase the Swiss TORNOS DECO 10e lathe. Contact us for further information. 2 similar units available! Additional Features: • Sliding headstock • Direction-dependent spindle stop S1 • Cross-slide with 4 tool holders T11-T24, capable of vertical and horizontal movement • Independent sub-spindle Lajdpfx Aox D Dmmjfioa • Swiveling workpiece holder on the sub-spindle • Lubrication device for guide bush with filter • 3 presettable turning tool holders • Motorization S2 • Thread cutting unit for collet chuck ESX 12 • 4 fixed tool holders • Drum-style bar feeder magazine • Integrated 25-liter hydraulic power unit with filter • Front and rear support stands, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1–4 mm bars and 14 guide tubes for 4.1–10 mm bars (no bar preparation required up to 8 mm) • Electrical control cabinet • Motor voltage: 400 V • Control voltage: 24 V • Max turning diameter: 10 mm Optional: Comprehensive set of measuring devices available Technical Specification Counter Spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 37.578 h, Diameter batang (maks.): 8 mm, jumlah sumbu: 9, en Ljdpfx Afex D Dm Tsieaa

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Diameter batang (maks.): 10 mm, jumlah sumbu: 7, This Tornos DECO 10e was manufactured in 2010. It is a Swiss sliding headstock lathe featuring a direction-dependent spindle stop and an independent sub-spindle. The machine comes equipped with a drum-type bar feeder and an integrated 25-liter hydraulic unit. Designed for precise turning operations in small batch production, it supports bar diameters from 1 to 10 mm, with processing up to 8 mm possible without bar end preparation. Please contact us for further information regarding this machine. Additional Information • Electrical control cabinet Laedpfxjx D Dndj Afioa • Cross slide with 4 tool holders (T11–T24) with vertical and horizontal movement • 3 preset turning tool holders • 4 fixed tool holders • Thread cutting device for ESX 12 collet • Sliding headstock • Independent sub-spindle • Swivelling workpiece holder on sub-spindle • Lubrication device for guide bushing with filter • Drum-type bar feeder • Integrated 25-liter hydraulic power unit with filter • Front and rear support pedestal, center height 1100 mm • "HYBRID 10+5" drum with 14 guide tubes for 1–4 mm bars and 14 guide tubes for 4.1–10 mm bars, allowing up to 8 mm without bar end preparation • Motor voltage 400 V • Control voltage 24 V • Spindle drive motor speed n = 12,000 rpm Optional: Comprehensive measuring equipment package Technical Specification Counter Spindle: Yes

Kondisi: baik (bekas), Tahun pembuatan: 2010, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 26 mm - Travel distance: 240 mm - Spindle speed: 8,000 rpm - Spindle drive power: 7.5 kW - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 26 mm - Spindle speed: 6,000 rpm TOOL HOLDER 1 - Number of positions: 5 TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm FRONT TOOL STATION - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm BACKWORKING Laedpoyuyqkjfx Afiea - Number of positions: 7 - Number of driven positions: 3 - Driven tool speed: 6,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Operating hours: 56,433 h EQUIPMENT - Control: Fanuc - Driven tool motorisation - Powered guide bushing - Parts catcher - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Number of driven tool holders: 3 - Number of fixed tool holders: 7 - Magazine loader