Beli Tornos Deco bekas (122)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Diameter batang (maks.): 10 mm, produsen pengendali: FANUC, model controller: 16i-TB, jumlah sumbu: 9, Swiss lathe from 2006. This TORNOS DECO 10a comes equipped with an automatic, integrated bar feeder allowing for a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. It features a Robobar SSF 3m loading magazine and is fitted with a FANUC 16i-TB control unit. If you are looking for a high-quality lathe, consider the TORNOS DECO 10a we have for sale. Contact us for further details. • Overhauled in 2016: • Machine, ball screws (replaced if required), linear guides, guide bushings, main spindle and counter spindle checked • Complete cleaning • Maintenance according to Block 3 carried out • All drive belts replaced • Barriers, relays, filter mats replaced • Reference points adjusted • Configuration/Features: • Sliding headstock • Oriented spindle stop (S1) • Independent counter spindle (S4) • 9 axes with C1 and C4 and Transmit • 1 cross-slide with 4 tool stations • Tool breakage detection sensor Additional equipment: • Automatic, integrated bar feeder (oil-bath) TORNOS-BECHLER type SSF-210, equipped with Robobar SSF 3m loading magazine • Max. bar length: 3.2 m • Bar passage: min. 2 mm, max. 10 mm • Max. diameter without bar preparation: 8 mm (without collet) • "HYBRIDE 10+5" drum with: • 14 guide holes for 1–4 mm • 14 guide holes for 4.1–10 mm • Loading magazine with drum • Integrated 25-litre hydraulic unit with filter • Front and rear stabilizer foot, centre height 1,100 mm • Electrical control cabinet (circuit diagram 112.20.300) • Motor voltage 400 V, control voltage 24 V • Colour: Anthracite RAL 7016 / Grey RAL 7035 Technical Specification Kwjdpfeytcalex Ag Row Counter Spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, Diameter batang (maks.): 7 mm, jumlah sumbu: 9, Swiss lathe from the year 2000. This TORNOS Deco 10a features a movable headstock, an independent counter spindle, and a pivoting workpiece holder. It comes equipped with a magazine loader with a drum and a lubrication device for the guide bushings. If you are looking for a high-quality lathe, consider the TORNOS Deco 10a, which we have for sale. Contact us for further details. • Movable headstock • Direction-dependent spindle stop S1 • Cross slide with 4 tool holders T11-T24 featuring vertical and horizontal travel • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for the guide bush with filter • S2 motorization • Integrated 25-liter hydraulic unit with filter • Electrical control cabinet • Motor voltage 400 V • Control voltage 24 V • Drive motor n = 12,000 rpm Additional Equipment • Magazine loader with drum (bar feeder) • "HYBRID 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars (no bar preparation up to 8 mm) • 3 presettable turning tool holders • 4 fixed tool holders Kwsdpfxeyr Nflj Ag Rew • Thread cutting device for collet ESX 12 • Front and rear support feet, center height 1100 mm Technical Specification Counter Spindle No

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, produsen pengendali: FANUC, model controller: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar loader with a maximum bar length of 3.2 m and a bar capacity of 2 to 10 mm. The machine is equipped with a Robobar SSF 3m magazine loader and a FANUC 16i-TB control unit, ensuring precise and efficient operation. Ideally suited for complex Swiss-type turning operations. Contact us for more details about this machine. Kwjdpfxsx D Dlis Ag Row 2 similar machines available! Additional information: • Maximum bar length: 3200 mm • Bar capacity: Minimum 2 mm, Maximum 10 mm • Maximum diameter without preparation: 8 mm (without collet) • Motor voltage: 400 V • Control voltage: 24 V • Independent sub-spindle (S4) • FANUC 16i-TB control • 1 cross slide with 4 tool holders • Tool breakage detection sensor • Center height: 1100 mm • Automatic and integrated oil-bath bar loader • Robobar SSF 3m magazine loader • Front and rear support feet • "HYBRID 10+5" drum with 14 guide holes for 1-4 mm and 14 guide holes for bars 4.1-10 mm without bar preparation up to 8 mm • Electrical control cabinet • Integrated 25-liter hydraulic unit with filter • Movable headstock • Oriented spindle stop Optional: Extensive set of measuring devices

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Diameter batang (maks.): 10 mm, jumlah sumbu: 9, This TORNOS DECO 10a was manufactured in 2010. It features a sliding headstock, direction-dependent spindle stop, and cross slides equipped with tool holders. The machine is equipped with an independent counter spindle, a swiveling workpiece holder, and a lubrication system. Additional equipment includes a bar feeder, an integrated hydraulic unit, and an electrical control cabinet. If you are looking for a high-quality lathe, the TORNOS DECO 10a we are offering for sale is an excellent choice. Please contact us for further information. Additional Information: • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • 3 presettable turning tool holders Kodpjx D Dmtefx Ag Rsww • 4 stationary tool holders • Sliding headstock • Direction-dependent spindle stop S1 • Independent counter spindle • Swiveling workpiece holder at the counter spindle • Lubrication device for guide bushings with filter • Thread cutting device for collet chuck ESX 12 • Drum-type bar feeder • Integrated 25-liter hydraulic unit with filter • Support foot front/rear, center height 1100 mm • "HYBRID 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, no bar preparation required up to 8 mm • Electrical control cabinet • Motor voltage 400 V • Control voltage 24 V Optional: Comprehensive gauge package Technical Specification: Counter Spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Diameter batang (maks.): 10 mm, jumlah sumbu: 9, This TORNOS DECO 10a was manufactured in 2003. It features a movable headstock, a direction-dependent spindle stop, and several cross slides with tool holders for versatile machining operations. Equipped with a counter spindle and programming software available in five languages, it is ideal for complex turning applications. It includes interfaces for bar feeders and tool breakage detection. Further details on this machine are available upon request. Additional Information • Programming software TB-DBCO Version 6: Stand-alone product, configuration available in 5 languages (French, German, English, Italian, Spanish) • Programming language: ISO programming language • Movable headstock: Axes S1/Z1, n = 16,000 rpm, collet F13 • Spindle stop: Direction-dependent spindle stop S1 (programming step 0.1 degree) • Cross slides: • 1 cross slide with 4 tool positions (axes X1 and Y1) • 1 cross slide with 3 tool holders (axes Z3 and X3) • 1 cross slide with horizontal and vertical movement (axes Z4 and X4) • Pneumatic cylinders: 3 independent cylinders for rapid positioning • Counter spindle: Independent (S4), n = 12,000 rpm, collet F13 • Cross-slide support options: • Pre-settable turning tool holder, long type, 8x8 mm cross-section • Main spindle rotation direction: right-handed • S2 drive (electrical/mechanical) for powered attachments on the X2-Y2 linear tool carrier • Powered end drilling/milling unit: Max. speed 12,000 rpm • Cross drilling/milling/tapping unit for collet BSX 12 • Sensor: Tool breakage detection with MIDI-DETECTOR type, mini-toggle probe MINI-DETECTOR type, electrical interface, pneumatic control devices Kjdpsx D Dm Hofx Ag Rjww • Interface: Adaption for an LNS bar feeder • Spindle speed: n = 16,000 rpm indicates the machine has a moderate spindle speed capacity • Additional: Comprehensive set of measuring devices Technical Specification Counter Spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Diameter batang (maks.): 10 mm, jumlah sumbu: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It is equipped with a drum-type bar loader, an integrated hydraulic unit, and supports both at the front and rear with a center height of 1100 mm. The machine features a movable headstock, a directional spindle stop, and a cross slide with tool holders. It is ideally suited for precision turning operations and operates with AC drive motors and an absolute measurement system. Contact us for further information regarding this machine. Overhauled in 2017, with two additional similar machines available (both overhauled in 2018) 2017 Overhaul Details: Standard overhaul package: Block III maintenance, cleaning, and recommissioning. Overhaul of the guide bushing and overhaul of spindles S1, S2, and S4. Replacement of all ball screws, including bearings, and the guides on all axes. Replacement of coolant pump, all coolant lines, and the coolant sensor. Replacement of wipers on the cross slides. Replacement of all pneumatic lines and valves. Replacement of machine lighting, viewing panels, external fan, fan cable, and keyboard. Additional options (special services): The guide bushing was completely replaced (not just overhauled). New central lubricating system installed. Replacement of bellows coupling, external encoders, and monitor. Replacement of the control and amplifier fans. Upon recommissioning, the 'Spindle Positioning S4' option was also activated and the bar loader was set up. Additional Information Kodpfxox D D Iko Ag Rsww • Maximum bar length: 3040 mm • Electrical control cabinet • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Movable headstock • Cross slide with 4 tool holders T11-T14, with vertical and horizontal movement • Absolute measurement system • 9 axes with C1 and C4 • Drum bar loader 'HYBRIDE 10+5' • 14 guide tubes for 1–4 mm bars • 14 guide tubes for 4.1–10 mm bars, without bar preparation up to 8 mm • Tryton collet • 2 different hybrid drums • Direction-dependent spindle stop S1 • Can be equipped with Robobar SSF 3 m bar loader Technical Specification Counter spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, kecepatan spindel (maks.): 12.000 rpm, Diameter batang (maks.): 10 mm, jumlah sumbu: 9, This Swiss lathe TORNOS DECO 2000 was manufactured in 2000. It features a movable headstock, a direction-dependent spindle stop, and cross slides with tool holders. The machine is equipped with an independent counter spindle, a lubrication system, and a drum bar loader. It comes with a 'HYBRIDE 10+5' drum for bar stock up to 10 mm and an integrated hydraulic unit. For more information about this machine, please contact us. Additional Information • Electrical control cabinet • Motor voltage: 400 V • Control voltage: 24 V • Movable headstock • Cross slides with 4 tool stations T11-T24 with vertical and horizontal movement • Swiveling workpiece holder at the counter spindle • Direction-dependent spindle stop S1 Kodpfex D Dmyex Ag Rjww • 3 presettable turning tool holders • 4 fixed tool holders • 'HYBRIDE 10+5' drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, no bar preparation required up to 8 mm • Independent counter spindle • Thread cutting device for collet ESX 12 • Lubrication device for guide bush with filter • Drum-type bar loader • Integrated 25-liter hydraulic power unit with filter • Front and rear support feet, center height 1100 mm Optional: Comprehensive measuring device package Technical Specification Counter Spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Diameter batang (maks.): 10 mm, jumlah sumbu: 7, This TORNOS DECO 10e was manufactured in 2007. A Swiss lathe featuring a sliding headstock, direction-dependent spindle stop, and multiple tool holders for versatile operations. It includes an independent sub-spindle, a lubrication unit, and a drum magazine. Ideal for precision turning operations with a maximum bar capacity of 10 mm. Take advantage of this opportunity to purchase the Swiss TORNOS DECO 10e lathe. Contact us for further information. 2 similar units available! Additional Features: • Sliding headstock • Direction-dependent spindle stop S1 • Cross-slide with 4 tool holders T11-T24, capable of vertical and horizontal movement • Independent sub-spindle • Swiveling workpiece holder on the sub-spindle • Lubrication device for guide bush with filter • 3 presettable turning tool holders • Motorization S2 Kwjdsx D Dmmspfx Ag Rjw • Thread cutting unit for collet chuck ESX 12 • 4 fixed tool holders • Drum-style bar feeder magazine • Integrated 25-liter hydraulic power unit with filter • Front and rear support stands, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1–4 mm bars and 14 guide tubes for 4.1–10 mm bars (no bar preparation required up to 8 mm) • Electrical control cabinet • Motor voltage: 400 V • Control voltage: 24 V • Max turning diameter: 10 mm Optional: Comprehensive set of measuring devices available Technical Specification Counter Spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 37.578 h, Diameter batang (maks.): 8 mm, jumlah sumbu: 9, en Kwjdpfx Agsx D Dm Ts Rjw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Diameter batang (maks.): 10 mm, jumlah sumbu: 7, This Tornos DECO 10e was manufactured in 2010. It is a Swiss sliding headstock lathe featuring a direction-dependent spindle stop and an independent sub-spindle. The machine comes equipped with a drum-type bar feeder and an integrated 25-liter hydraulic unit. Designed for precise turning operations in small batch production, it supports bar diameters from 1 to 10 mm, with processing up to 8 mm possible without bar end preparation. Please contact us for further information regarding this machine. Additional Information • Electrical control cabinet • Cross slide with 4 tool holders (T11–T24) with vertical and horizontal movement • 3 preset turning tool holders • 4 fixed tool holders • Thread cutting device for ESX 12 collet • Sliding headstock • Independent sub-spindle • Swivelling workpiece holder on sub-spindle • Lubrication device for guide bushing with filter • Drum-type bar feeder • Integrated 25-liter hydraulic power unit with filter • Front and rear support pedestal, center height 1100 mm • "HYBRID 10+5" drum with 14 guide tubes for 1–4 mm bars and 14 guide tubes for 4.1–10 mm bars, allowing up to 8 mm without bar end preparation • Motor voltage 400 V • Control voltage 24 V • Spindle drive motor speed n = 12,000 rpm Kwedpfx Agsx D Dndj Rsw Optional: Comprehensive measuring equipment package Technical Specification Counter Spindle: Yes

Kondisi: baik (bekas), Tahun pembuatan: 2010, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 26 mm - Travel distance: 240 mm - Spindle speed: 8,000 rpm - Spindle drive power: 7.5 kW - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 26 mm - Spindle speed: 6,000 rpm TOOL HOLDER 1 - Number of positions: 5 TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm FRONT TOOL STATION - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm BACKWORKING Kwodpeyuyqkjfx Ag Rew - Number of positions: 7 - Number of driven positions: 3 - Driven tool speed: 6,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Operating hours: 56,433 h EQUIPMENT - Control: Fanuc - Driven tool motorisation - Powered guide bushing - Parts catcher - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Number of driven tool holders: 3 - Number of fixed tool holders: 7 - Magazine loader

Kondisi: bekas, Tahun pembuatan: 2007, de-listing-001 Kwjdpfxjytgc Ds Ag Row

Kondisi: bekas, Tahun pembuatan: 2011, deco-sigma-32-ger Kedpfjytgb Tox Ag Rsww

Kondisi: bekas, Tahun pembuatan: 2016, de Kodpfxoytf U Se Ag Rjww

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 61.700 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7831, daya motor spindle: 5.500 W, panjang pembubutan: 231 mm, kecepatan spindel (maks.): 10.000 rpm, diameter pembubutan: 25 mm, lubang spindel: 25 mm, berat keseluruhan: 3.000 kg, kecepatan rotasi (maks.): 10.000 rpm, jenis arus masuk: tiga fasa, panjang umpan sumbu Y: 534 mm, panjang umpan sumbu Z: 230 mm, lebar total: 1.400 mm, panjang total: 2.400 mm, tinggi total: 2.060 mm, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 30 m/menit, Diameter batang (maks.): 25 mm, jarak gerak quill: 230 mm, diameter quill: 25 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, tegangan masuk: 400 V, daya: 5,5 kW (7,48 hp), jarak pergerakan sumbu X: 58 mm, jarak lintasan sumbu Y: 534 mm, jarak gerak sumbu Z: 230 mm, tekanan kerja: 6 batang, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Tornos Deco SIGMA 20s Zwitserse stijl automatische langdraaibank, inclusief een Robobar SBF-532 stafaanvoer (3000 mm), Mayfran Consep spaanafvoer met trommelfilter (uniek), elektrostatische olienevelafzuiger, en een automatisch CO₂-brandblussysteem (Kraft & Bauer). Uitgerust met een Fanuc 31i-model A besturing, maximale toerentallen van zowel hoofd- als subspil tot 10.000 tpm. Kjdpfx Aoyrg Aheg Reww Deze draaibank beschikt over 6 assen en 22 gereedschap-posities: Hoofspil: 12 posities, waarvan 6 aangedreven (tot 6.000 tpm) Subspil: 10 posities, waarvan 6 aangedreven (tot 6.000 tpm) De machine is verder voorzien van hogedruk koeling tot 80 bar. De machine is onder stroom te bezichtigen. Demontage en transport zijn voor rekening van de koper. Meegeleverde onderdelen: • Externe houder links, lang – 6× (417608) • Externe houder links, kort – 1× (417606) • Enkelvoudige aangedreven houder, gereduceerd toerental – 2× (417612) • Dubbele klemming, lang – 2× (417617) • Dubbele klemming, kort – 2× (417620) • Aangedreven blok – 2× (417624) Bussen voor aanvoerders (216787): • Ø10 • Ø16 • Ø20 • Ø25 Uitwerpset: • Ø5 tot Ø20 (per 1 mm)

Kondisi: bekas, Tahun pembuatan: 1998, jam operasional: 75.336 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: T62204, Perlengkapan: dokumentasi / manual, TECHNISCHE DATEN - Achszahl: 10 - Spindelanzahl: 2 HAUPTSPINDEL - Max. Stangendurchmesser: 25,4 mm Kwodpfx Aow Stndjg Rsw - Max. Bearbeitungslänge: 200 mm - Spindeldrehzahl: 10.000 U/min - C-Achsen-Indexiergenauigkeit: 0,1° GEGENSPINDEL - Max. Stangendurchmesser: 20 mm - Spindeldrehzahl: 10.000 U/min - Spindelleistung: 3,7 kW - C-Achsen-Indexiergenauigkeit: 0,1° - Anzahl Führungsbuchsenhalter: 2 FÜHRUNGSBUCHSENHALTER 1 - Positionen: 5 FÜHRUNGSBUCHSENHALTER 2 - Positionen: 5 - Angetriebene Positionen: 4 - Drehzahl angetriebene Werkzeuge: 8.000 U/min FRONTBEARBEITUNG - Positionen: 4 - Angetriebene Positionen: 4 - Drehzahl angetriebene Werkzeuge: 6.000 U/min RÜCKSEITENBEARBEITUNG - Positionen: 7 - Angetriebene Positionen: 3 - Drehzahl angetriebene Werkzeuge: 8.000 U/min STROMVERSORGUNG - Netzspannung: 400 V - Gesamtanschlussleistung: 14 kW GEWICHT & ABMESSUNGEN - Stellfläche der Maschine: 2.270 x 1.650 mm - Maschinenhöhe: 2.200 mm - Maschinengewicht: 3.500 kg AUSSTATTUNG - CNC-Steuerung: Fanuc - Angetriebene Werkzeuge an: S2, S3, S5 vertikal/horizontal - Drehbare Führungsbuchse - Teilefänger - Werkstückauswurf - Kühlmitteltank - Stangenlader: ROBOBAR SSF

Kondisi: sangat baik (bekas), Pemegang alat hampir baru untuk DECO 20 - DECO 26 4 buah - Pemegang alat tetap TORNOS untuk X1Y1; X2Y2; X4Y4 Ksdpfxeh Uulks Ag Reww ----- - Dudukan pahat bubut untuk 16x16 mm: - Harga per dudukan €180,00/unit untuk DECO2000 ø20 & 25mm DECO 20 dan DECO 26 3x dengan pelat depan 1x tanpa pelat depan ----- Pengiriman dalam Jerman €12,00 Pengiriman dalam EU €25,00 Selain itu, kami juga memiliki 6 insert reduksi spindle: pernah digunakan di DECO 26mm diameter dalam 8,0mm; 12,0mm; 21,0mm; 3x 26mm diameter luar 30mm, ulir M32x1,5 panjang ±360mm Diameter luar flange 45mm x 9mm dengan 4 lubang berulir M4 2x alur 8 mm Harga spesial untuk semua 6 reduksi sudah termasuk ongkir €380,00 Atas permintaan, kami dengan senang hati mengirimkan gambar; untuk itu diperlukan alamat email Anda.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7213, Country of manufacture: Switzerland Net weight: approx. 2,550 kg Customs tariff code: 8458.11 20 Dimensions: 2,000 x 1,260 x 1,950 mm TECHNICAL SPECIFICATIONS 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation - 1 sliding headstock: Z1, S1 - 2 independent vertical tool carriers: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent secondary-operation rotating axis: X4, S5 Bar feed position: right of operator Machine axis height: 1,100 mm Main spindle stroke: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Maximum workpiece length Guide bushing machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bushing: fixed / rotating Collet for guide bushing, type: Meister 605 Number of combined side tools: fixed: 2 x 5 / rotating: 3 + 3 Number of combined front tools: fixed: 4 / rotating: 3 Number of combined rear tools: fixed: 3 + 3 / rotating: 3 + 3 Tool section: 12 x 12 mm Rotary tool holder collet: standard ESX 20 Bar feeder: yes Parts catcher: yes All technical data provided without obligation and subject to errors or omissions. Kedpfsw T Tcwjx Ag Rsww

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2410, Year 2001 with Fanuc Deco and 10 axes Fully checked and partially overhauled as per inspection report. Country of manufacture Switzerland Net weight 1,500 kg Customs tariff number 8458.11 20 Dimensions 1650x1050x1850 mm TECHNICAL SPECIFICATIONS (standard configuration) Headstock (Z1 axis) (+C axis optional) Maximum bar capacity dia. 10 mm Maximum part length, depending on guide bush type 60/90 mm Programmable spindle speed 0–16,000 rpm Programmed stop and index, increment 0.1° Maximum spindle power 1.1 (3.7) kW Tool post (X1/Y1) (X2/Y2) Number of tools on turret (2 slides; 2 x 2 axes) 2 x 4 Tool section 8 x 8 mm Number of cross drills/milling tools on turret 4 Kwsdpfx Agew T Tfrj Row Programmable speed range 0–12,000 rpm End working attachment (X3/Y3) Max. number of end working tools 3 Programmable speed range 0–12,000 rpm Sub spindle and secondary operations (X4/Z4) (+C axis optional) Maximum clamping capacity 7 mm Programmable spindle speed 0–16,000 rpm Programmed stop and index; increment 0.1° Maximum number of secondary operations 4 Number of fixed or live spindles 4 Maximum spindle speed 9,000 rpm Specific Tornos-Bechler/Fanuc CNC CPU type 486 DX2 Number of simultaneous axes 10 Machine versions 9 axes + spindle C axis and/or sub-spindle C axis All technical details provided are subject to possible error or omission and are not binding.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3467, Manufacturing origin: Switzerland Net weight: 3000 kg Customs tariff number: 8458.11 20 Dimensions: 215x150x215 cm TECHNICAL SPECIFICATIONS (standard) Headstock (Z1 axis) (+C axis optional) Maximum bar capacity: dia. 20 mm Maximum part length depending on guide bush type: 200 mm Programmable spindle speed: 0-12,000 rpm Positioned stop and indexing, increment: 0.1 degree Maximum spindle power: 3.7 (5.5) kW Tool carrier (X1/Y1) (X2/Y2) Number of tools on turret (2 slides; 2 x 2 axes): 2 x 5 Tool section: 16 x 16 mm Number of transversal drilling/milling stations on turret: 4 Programmable rotation speed: 0-8,000 rpm End-working attachment (X3/Y3) Maximum number of end-working tools: 4 Programmable rotation speed: 0-8,000 rpm Sub-spindle and counter operations (X4/Z4) (+C axis optional) Kwodpew Uczxjfx Ag Rjw Maximum clamping diameter: 20 mm Programmable rotation speed: 0-12,000 rpm Positioned stop and indexing; increment: 0.1 degree Maximum number of counter operations: 7 Number of fixed or rotating spindles: 7 Maximum spindle rotation speed: 8,000 rpm Specific CNC system: Tornos-Bechler/Fanuc Processor type: 486 DX2 Number of simultaneous axes: all Unless otherwise specified, these technical details are provided without commitment and are subject to errors or omissions.

Kondisi: bekas, Tahun pembuatan: 2001, Technical details: Spindle bore: 25 mm Item: CNC Swiss-type automatic lathe Manufacturer: Tornos Model: Deco 2000/20 Year of manufacture: 2001 Control: Fanuc Spindle bore: D25 mm Max. spindle speed: 7,000 rpm Tool carriers: 2 (X, Z, Y axes) Kwodpfx Aotwglaeg Rjw Front attachment: 1 (X, Z, S axes) Bar loader: Tornos Robobar SSF Chip conveyor: Hinged belt chip conveyor Additional equipment: various accessories such as polygon turning device, high-frequency spindle Please contact us for further information and photos via email (at) or *

Kondisi: bekas, deco2000-2024 Kodpfxexx U I Rs Ag Roww

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), TORNOS DECO 2000 CNC Lathe TECHNICAL DATA Dimensions and Weights Dimensions: - Length: 2000 mm - Width: 1260 mm - Height: 1950 mm Weight (empty): 2550 kg Specific floor loading: Approx. 8 daN/cm2 Axes - 1 sliding headstock: Z1, S1 - 2 independent linear tool systems on the vertical axis: X1 / Y1 (S6) – X2 / Y2, S2 - 1 front unit, 4 spindles: X3 / Z3 - 1 independent pick-off spindle: Y4 / Z4, S4 - 1 independent tooling system for backworking: X4 (S5) General Data - Bar capacity: For min. remnant: 13 mm - For max. remnant: 16 mm - Max. workpiece length (with rotating guide bush): 180 mm - Work in collet: 30 mm - Main spindle speed: 12,000 rpm - Spindle rotation: Preferably: Right-hand - Main spindle drive: Continuous operation: 2.2 kW Kedpfxjmdn Ims Ag Rjww - Intermittent operation: 3.7 kW - Pick-off spindle drive: Continuous operation: 1.5 kW / Intermittent operation: 2.2 kW - Spindle collet type: F20 - Guide bushes: Rotating, fixed - Type of guide bush collet: Meister: 605 - Number of tools in main operation: Fixed: 2 x 5 / Driven: 3 + 3 - Number of front tools: Fixed: 4 / Driven: 3 - Tool cross-section: 12 x 12 - Rotating tool collets, standard: ESX 20 - Number of tools in backworking: Fixed: 3 + 3 / Driven possible: 3 + 3 - Bar loader: Yes - Parts removal: Basic version - Machine type: Sliding headstock - Centre height: 1100 mm - Headstock stroke: 255 mm - Bar guide position: Right side of operator - Bar capacity: 1-16 mm - Teleskop tube bore: 6-17 mm - Spindle speeds: Left / right: -12,000 to 12,000 rpm - Headstock feed speed: Max. 20 m/min We do not assume any liability for the correctness, completeness or up-to-dateness of the information.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Produsen: TORNOS Tipe: DECO 2000/07 Tahun: 1996 No. Mesin: T 62136 Negara: Swiss Kjdpfx Aexq D Svjg Reww Spesifikasi: Maks. kapasitas di collet: 7 mm Kontrol: FANUC 16 T-B Penghitung jam, mesin aktif: 24.095 jam Dilengkapi dengan: Perangkat penjepit collet Majalah pengisi batang Sumbu C penuh Penjepit benda kerja Pemegang alat Sistem pendingin Kunci operator, dll.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Kontrol numerik Fanuc Automatic bar feeder Iemca Boss 332r Sistem pemadam kebakaran Kwjdpfx Agsxcpl Es Rew Konveyor serpihan