Beli Tornos Deco bekas (121)

Kondisi: bekas, en-TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 [mm] - Max. machinable length: 200 [mm] - Spindle speed: 10,000 [rpm] - Minimum C-axis resolution: 0.1 [deg] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.1 [deg] - Number of tool holders: 2 TOOL HOLDER 1 - Number of positions: 5 TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 4 - Driven tool speed: 8,000 [rpm] FRONT UNIT - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 6,000 [rpm] OPPOSITE MACHINING - Number of positions: 7 - Number of driven positions: 3 - Driven tool speed: 8,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power consumption: 13 [kVA] WEIGHT AND DIMENSIONS - Footprint: 2,270 x 1,650 [mm] - Machine height: 2,200 [mm] - Machine weight: 3,500 [kg] MACHINE HOURS - Operating hours: 40,236 [h] EQUIPMENT - Control: Fanuc PNC DECO - Motorization of driven tools at: S2, S3, S5 vertical + horizontal - Driven guide bushing - Parts catcher - Coolant tank * with coolant chiller * with high-pressure pump Hodsuhawnjpfx Ad Ror - Number of driven tool holders: 4 - Number of rotating tool holders: 7 - Number of fixed drills: 4

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 37.578 h, Diameter batang (maks.): 8 mm, jumlah sumbu: 9, en Hsdpfxjy S Aq As Ad Rjr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, produsen pengendali: FANUC, model controller: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar loader with a maximum bar length of 3.2 m and a bar capacity of 2 to 10 mm. The machine is equipped with a Robobar SSF 3m magazine loader and a FANUC 16i-TB control unit, ensuring precise and efficient operation. Ideally suited for complex Swiss-type turning operations. Contact us for more details about this machine. 2 similar machines available! Additional information: • Maximum bar length: 3200 mm • Bar capacity: Minimum 2 mm, Maximum 10 mm • Maximum diameter without preparation: 8 mm (without collet) • Motor voltage: 400 V • Control voltage: 24 V • Independent sub-spindle (S4) Hedpfjy S Aqijx Ad Rjr • FANUC 16i-TB control • 1 cross slide with 4 tool holders • Tool breakage detection sensor • Center height: 1100 mm • Automatic and integrated oil-bath bar loader • Robobar SSF 3m magazine loader • Front and rear support feet • "HYBRID 10+5" drum with 14 guide holes for 1-4 mm and 14 guide holes for bars 4.1-10 mm without bar preparation up to 8 mm • Electrical control cabinet • Integrated 25-liter hydraulic unit with filter • Movable headstock • Oriented spindle stop Optional: Extensive set of measuring devices

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), TORNOS DECO 2000 CNC Lathe TECHNICAL DATA Dimensions and Weights Dimensions: - Length: 2000 mm - Width: 1260 mm - Height: 1950 mm Weight (empty): 2550 kg Specific floor loading: Approx. 8 daN/cm2 Axes - 1 sliding headstock: Z1, S1 - 2 independent linear tool systems on the vertical axis: X1 / Y1 (S6) – X2 / Y2, S2 - 1 front unit, 4 spindles: X3 / Z3 - 1 independent pick-off spindle: Y4 / Z4, S4 - 1 independent tooling system for backworking: X4 (S5) General Data - Bar capacity: For min. remnant: 13 mm - For max. remnant: 16 mm - Max. workpiece length (with rotating guide bush): 180 mm - Work in collet: 30 mm - Main spindle speed: 12,000 rpm - Spindle rotation: Preferably: Right-hand - Main spindle drive: Continuous operation: 2.2 kW - Intermittent operation: 3.7 kW - Pick-off spindle drive: Continuous operation: 1.5 kW / Intermittent operation: 2.2 kW - Spindle collet type: F20 - Guide bushes: Rotating, fixed - Type of guide bush collet: Meister: 605 - Number of tools in main operation: Fixed: 2 x 5 / Driven: 3 + 3 - Number of front tools: Fixed: 4 / Driven: 3 - Tool cross-section: 12 x 12 - Rotating tool collets, standard: ESX 20 - Number of tools in backworking: Fixed: 3 + 3 / Driven possible: 3 + 3 - Bar loader: Yes - Parts removal: Basic version - Machine type: Sliding headstock - Centre height: 1100 mm - Headstock stroke: 255 mm - Bar guide position: Right side of operator - Bar capacity: 1-16 mm - Teleskop tube bore: 6-17 mm - Spindle speeds: Left / right: -12,000 to 12,000 rpm - Headstock feed speed: Max. 20 m/min We do not assume any liability for the correctness, completeness or up-to-dateness of the information. Hjdpfsmdn Imjx Ad Rer

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, kecepatan spindel (maks.): 12.000 rpm, Diameter batang (maks.): 13 mm, jumlah sumbu: 6, This 6-axis TORNOS Deco 13 b was manufactured in 2004. It features a maximum bar diameter of 13 mm and a spindle speed range of 100 - 12,000 rpm. The machine is equipped with a linear tooling system with 6 tool positions and offers full machining capabilities for turning, drilling, tapping, and threading. If you are looking for a high-quality lathe, you should consider the TORNOS Deco 13 b Swiss Type Lathe, which we are offering for sale. Contact us for further details. • Capacity: • Maximum bar diameter: 13 mm • Axes: • Number of axes: 6 (X1, Y1, Z1, X2, Y2, Z2) • Main spindle (S1): • Max. bar passage: 16 mm Hodpfxoywlhbo Ad Rsr • Recommended minimum bar diameter: 3 mm • Maximum workpiece length: 160 mm • Collet type: Schaublin F20 • Sub spindle (S2): • Max. workpiece diameter: 16 mm • Maximum workpiece length (secondary machining): 160 mm • Spindle speed: 100-12,000 rpm • Clamping force: 730 daN • Axis travels: • X1: 35 mm, Y1: 158 mm, Z1: 187 mm • X2: 118 mm, Y2: 160 mm, Z2: 174 mm • Traverse speeds: • Max. axis speed: 20 m/min • Guide bushing: • Max. bar passage: 16 mm • Tooling system: • Linear tooling system (front + rear) • Number of tool positions: 6 (3 axial + 3 cross) • Distance between tools: 38 mm • Max. live tools: up to 3 • Driven tools (S3): • Max. speed: 8,000 rpm • Power: up to 1.1 kW • Drilling capacity: up to 8-10 mm • Tapping capacity: M6-M8 • Secondary operations: • 3 working positions • Full machining (turning, drilling, tapping, threading) • Cooling system: • Oil capacity: 200 L • Chip container: approx. 100 L Additional Equipment • Bar feeder (integrated): • Maximum bar length: 3.3 / 3.85 / 4.2 m • Minimum bar length: 1.2 m • Bar diameter range: 3-16 mm • Parts conveyor • Oil bath system • RS232 interface • Work area lighting Technical Specification Counter Spindle: Yes Driven Tools: Yes

Kondisi: sangat baik (bekas), Holder alat hampir baru untuk DECO 20 - DECO 26 3 buah holder alat tetap TORNOS untuk X1Y1; X2Y2; X4Y4 ----- - Holder pahat bubut untuk 16x16 mm: - Harga per holder €180,00/unit untuk DECO2000 ø20 & 25mm DECO 20 dan DECO 26 3x dengan pelat depan 1x tanpa pelat depan ----- Pengiriman dalam Jerman €12,00 Pengiriman dalam EU €25,00 Selain itu, kami juga memiliki 6 sisipan reduksi spindle: digunakan pada DECO 26mm Hsdpfxoy Apn Ae Ad Rsr Diameter dalam: 8,0mm; 12,0mm; 21,0mm; 3x 26mm Diameter luar: 30mm, ulir M32x1,5, panjang sekitar 360mm Diameter flensa luar 45mm x 9mm, 4 lubang ulir M4 2x alur 8 mm Harga spesial untuk semua 6 reduksi termasuk ongkir €380,00 Atas permintaan, kami dengan senang hati mengirim foto—silakan berikan alamat email Anda.

Kondisi: bekas, Tahun pembuatan: 2001, Technical details: Spindle bore: 25 mm Item: CNC Swiss-type automatic lathe Manufacturer: Tornos Model: Deco 2000/20 Year of manufacture: 2001 Control: Fanuc Spindle bore: D25 mm Hodjtwglaspfx Ad Rer Max. spindle speed: 7,000 rpm Tool carriers: 2 (X, Z, Y axes) Front attachment: 1 (X, Z, S axes) Bar loader: Tornos Robobar SSF Chip conveyor: Hinged belt chip conveyor Additional equipment: various accessories such as polygon turning device, high-frequency spindle Please contact us for further information and photos via email (at) or *

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7213, Country of manufacture: Switzerland Net weight: approx. 2,550 kg Customs tariff code: 8458.11 20 Dimensions: 2,000 x 1,260 x 1,950 mm TECHNICAL SPECIFICATIONS 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation - 1 sliding headstock: Z1, S1 Hjdpfsw T Tcwjx Ad Rer - 2 independent vertical tool carriers: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent secondary-operation rotating axis: X4, S5 Bar feed position: right of operator Machine axis height: 1,100 mm Main spindle stroke: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Maximum workpiece length Guide bushing machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bushing: fixed / rotating Collet for guide bushing, type: Meister 605 Number of combined side tools: fixed: 2 x 5 / rotating: 3 + 3 Number of combined front tools: fixed: 4 / rotating: 3 Number of combined rear tools: fixed: 3 + 3 / rotating: 3 + 3 Tool section: 12 x 12 mm Rotary tool holder collet: standard ESX 20 Bar feeder: yes Parts catcher: yes All technical data provided without obligation and subject to errors or omissions.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2410, Year 2001 with Fanuc Deco and 10 axes Fully checked and partially overhauled as per inspection report. Country of manufacture Switzerland Net weight 1,500 kg Customs tariff number 8458.11 20 Dimensions 1650x1050x1850 mm TECHNICAL SPECIFICATIONS (standard configuration) Headstock (Z1 axis) (+C axis optional) Maximum bar capacity dia. 10 mm Maximum part length, depending on guide bush type 60/90 mm Programmable spindle speed 0–16,000 rpm Programmed stop and index, increment 0.1° Maximum spindle power 1.1 (3.7) kW Tool post (X1/Y1) (X2/Y2) Number of tools on turret (2 slides; 2 x 2 axes) 2 x 4 Tool section 8 x 8 mm Number of cross drills/milling tools on turret 4 Programmable speed range 0–12,000 rpm Hsdpfx Adow T Tfre Rer End working attachment (X3/Y3) Max. number of end working tools 3 Programmable speed range 0–12,000 rpm Sub spindle and secondary operations (X4/Z4) (+C axis optional) Maximum clamping capacity 7 mm Programmable spindle speed 0–16,000 rpm Programmed stop and index; increment 0.1° Maximum number of secondary operations 4 Number of fixed or live spindles 4 Maximum spindle speed 9,000 rpm Specific Tornos-Bechler/Fanuc CNC CPU type 486 DX2 Number of simultaneous axes 10 Machine versions 9 axes + spindle C axis and/or sub-spindle C axis All technical details provided are subject to possible error or omission and are not binding.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3467, Manufacturing origin: Switzerland Net weight: 3000 kg Customs tariff number: 8458.11 20 Dimensions: 215x150x215 cm TECHNICAL SPECIFICATIONS (standard) Headstock (Z1 axis) (+C axis optional) Maximum bar capacity: dia. 20 mm Maximum part length depending on guide bush type: 200 mm Programmable spindle speed: 0-12,000 rpm Positioned stop and indexing, increment: 0.1 degree Maximum spindle power: 3.7 (5.5) kW Tool carrier (X1/Y1) (X2/Y2) Number of tools on turret (2 slides; 2 x 2 axes): 2 x 5 Tool section: 16 x 16 mm Number of transversal drilling/milling stations on turret: 4 Hodpsw Uczxofx Ad Rjr Programmable rotation speed: 0-8,000 rpm End-working attachment (X3/Y3) Maximum number of end-working tools: 4 Programmable rotation speed: 0-8,000 rpm Sub-spindle and counter operations (X4/Z4) (+C axis optional) Maximum clamping diameter: 20 mm Programmable rotation speed: 0-12,000 rpm Positioned stop and indexing; increment: 0.1 degree Maximum number of counter operations: 7 Number of fixed or rotating spindles: 7 Maximum spindle rotation speed: 8,000 rpm Specific CNC system: Tornos-Bechler/Fanuc Processor type: 486 DX2 Number of simultaneous axes: all Unless otherwise specified, these technical details are provided without commitment and are subject to errors or omissions.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 61.700 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7831, daya motor spindle: 5.500 W, panjang pembubutan: 231 mm, kecepatan spindel (maks.): 10.000 rpm, diameter pembubutan: 25 mm, lubang spindel: 25 mm, berat keseluruhan: 3.000 kg, kecepatan rotasi (maks.): 10.000 rpm, jenis arus masuk: tiga fasa, panjang umpan sumbu Y: 534 mm, panjang umpan sumbu Z: 230 mm, lebar total: 1.400 mm, panjang total: 2.400 mm, tinggi total: 2.060 mm, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 30 m/menit, Diameter batang (maks.): 25 mm, jarak gerak quill: 230 mm, diameter quill: 25 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, tegangan masuk: 400 V, daya: 5,5 kW (7,48 hp), jarak pergerakan sumbu X: 58 mm, jarak lintasan sumbu Y: 534 mm, jarak gerak sumbu Z: 230 mm, tekanan kerja: 6 batang, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Tornos Deco SIGMA 20s Zwitserse stijl automatische langdraaibank, inclusief een Robobar SBF-532 stafaanvoer (3000 mm), Mayfran Consep spaanafvoer met trommelfilter (uniek), elektrostatische olienevelafzuiger, en een automatisch CO₂-brandblussysteem (Kraft & Bauer). Uitgerust met een Fanuc 31i-model A besturing, maximale toerentallen van zowel hoofd- als subspil tot 10.000 tpm. Deze draaibank beschikt over 6 assen en 22 gereedschap-posities: Hjdpfx Asyrg Ahed Ror Hoofspil: 12 posities, waarvan 6 aangedreven (tot 6.000 tpm) Subspil: 10 posities, waarvan 6 aangedreven (tot 6.000 tpm) De machine is verder voorzien van hogedruk koeling tot 80 bar. De machine is onder stroom te bezichtigen. Demontage en transport zijn voor rekening van de koper. Meegeleverde onderdelen: • Externe houder links, lang – 6× (417608) • Externe houder links, kort – 1× (417606) • Enkelvoudige aangedreven houder, gereduceerd toerental – 2× (417612) • Dubbele klemming, lang – 2× (417617) • Dubbele klemming, kort – 2× (417620) • Aangedreven blok – 2× (417624) Bussen voor aanvoerders (216787): • Ø10 • Ø16 • Ø20 • Ø25 Uitwerpset: • Ø5 tot Ø20 (per 1 mm)

Kondisi: bekas, Tornos mesin bubut multi-spindel dengan kontrol CNC Tipe/Model: Tornos Multi Deco 20.8 Kondisi: Bekas, sangat terawat Jam kerja mesin: sekitar 65.724 jam Data teknis: Diameter batang: 5-20 mm Panjang benda kerja maks (tanpa kontra-operasi): 100 mm Panjang benda kerja maks (dengan kontra-operasi): 80 mm Kecepatan putar spindle: hingga 5000 rpm Daya spindle maks: 15 kW Daya maksimal pengeboran/pembuatan ulir dalam: 3,7 kW Jumlah sumbu numerik: 22 Carriage aksial: 2 Carriage lintas (radial + aksial): 5 Hjdpfx Aszgw Aaed Rer Carriage memanjang: 7 Carriage pemotong: 1 Daya motor spindle kedua: 1,1 kW Dimensi mesin (PxLxT): sekitar 5880 x 1400 x 1950 mm Berat: sekitar 7200 kg

Kondisi: bekas, Tornos CNC multi-spindle automatic lathe Type/Model: Tornos MultiDeco 20.6 Condition: used Operating hours: 45,300 h Bar stock: Ø 5-22 mm Max. part length without sub-operation: 100 mm Max. part length with sub-operation: 80 mm Spindle rotation speed up to: 4,000 rpm Max. spindle power: 15 kW Max. drilling/internal threading power: 3.7 kW Sub-spindle motor power: 1.1 kW Number of CNC axes: 17 Axial slides: 5 Cross slides (radial and axial): 5 (Pos. 1 to 5) Cut-off slide: 1 CNC-controlled sub-operation slide with up to two backworking tools (Pos. 7) Connected load: 35 kW Dimensions (LxWxH): approx. 8053 mm x 1508 mm x 2210 mm Weight: approx. 8,500 kg Equipment / Accessories: Tornos PNC Deko control HIRTH gear drum locking Spindle stop at Pos. 4 (activation via camset) 2 high-speed drilling spindles XC06020.01; GWS Modular 40004; up to 80 bar 3 fixed drilling units GWS Modular 40004; up to 80 bar 7 base plates for tool holders GWS 60 AD60032 (Göltenbodt) 7 base holders for turning tools GWS 60/41 (Göltenbodt) Integrated bar loader TORNOS MSF 522/6 Bar loader material guide channel CO2 fire extinguishing system Kraft und Bauer Oil conditioning unit Knoll: VRF 500/1550 Hsdpfx Adezgwtxj Rer 2 high-pressure pumps, each 40L/40 bar 1 pump 20L/35 bar Oil capacity approx. 2,000 liters Swarf conveyor Knoll No discharge chute

Kondisi: baik (bekas), Tahun pembuatan: 1999, Multi-spindle automatic lathe TORNOS MultiDeco 26/6, serial no. T-61796, year of manufacture 1999, FANUC control, chip conveyor, bar feeder IEMCA Sir 32F, serial no. 98072003, year of manufacture 1998 Hjdpfx Aeunvwlod Rsr

Kondisi: bekas, DATA TEKNIS - Jumlah sumbu: 18 - Jumlah spindel: 6 - Panjang benda kerja maks.: 120 [mm] SPINDEL - Diameter batang maks.: 8 - 25,4 [mm] - Kecepatan spindel: 6000 [RPM] - Daya penggerak spindel: 18 [kW] SUMBU NUMERIK - 1 meja silang pada posisi 1: x=50 [mm], Z1=80 [mm] - 1 meja silang pada posisi 2: x=50 [mm], Z1=80 [mm] - 1 meja silang pada posisi 3: x=50 [mm], Z1=80 [mm] - 1 meja silang pada posisi 4: x=50 [mm], Z1=80 [mm] - 1 meja silang pada posisi 5: x=50 [mm], Z1=80 [mm] - 1 meja potong 6: x = 65 [mm] PASOKAN LISTRIK - Tegangan suplai: 400 [V] - Daya total: 71 [kVA] BERAT DAN DIMENSI - Luas yang dibutuhkan: 3.500 x 1.600 [mm] - Tinggi mesin: 1.950 [mm] - Berat mesin: 8500 [kg] JAM KERJA MESIN - Jam operasional: 72000 [jam] AKSESORI - Pengontrol: Fanuc 16i-TB - Gigi Hirth - Spindel balik dengan perlengkapan pemesinan balik - Dudukan alat bubut Goltenbolt di semua posisi - 5 mata bor tetap - 1 dudukan alat pemisah - Konveyor serpihan - Tangki pendingin Hodszhphqopfx Ad Ror * dengan pompa bertekanan tinggi - Majalah batang: ROBOBAR MSF-522/6 - Sistem penyedot kabut oli

Kondisi: bekas, DATA TEKNIS - Jumlah sumbu: 18 Hsdpfxozhphke Ad Rsr - Jumlah spindel: 6 - Panjang benda kerja maks.: 120 [mm] SPINDEL - Diameter batang maks.: 8 - 25,4 [mm] - Kecepatan putaran spindel: 6000 [RPM] - Daya penggerak spindel: 18 [kW] SUMBU NUMERIK - 1 meja silang pada posisi 1: x=50 [mm], Z1=80 [mm] - 1 meja silang pada posisi 2: x=50 [mm], Z1=80 [mm] - 1 meja silang pada posisi 3: x=50 [mm], Z1=80 [mm] - 1 meja silang pada posisi 4: x=50 [mm], Z1=80 [mm] - 1 meja silang pada posisi 5: x=50 [mm], Z1=80 [mm] - 1 meja pemotong 6: x = 65 [mm] PASOKAN LISTRIK - Tegangan suplai: 400 [V] - Daya total: 71 [kVA] BERAT DAN DIMENSI - Luas yang dibutuhkan: 3.500 x 1.600 [mm] - Tinggi mesin: 1.950 [mm] - Berat mesin: 8500 [kg] JAM OPERASI MESIN - Jam kerja: 65000 [jam] AKSESORI - Pengontrol: Fanuc 16i-TB - Gigi Hirth - Spindel berlawanan dengan perlengkapan pemesinan berlawanan - Penjepit alat bubut Goltenbolt di semua posisi - 5 bor tetap - 1 penjepit alat pemotong - Konveyor serpihan - Tangki pendingin * dengan pompa bertekanan tinggi - Majalah batang: ROBOBAR MSF-522/6 - Sistem penyedot kabut oli

Kondisi: bekas, TECHNICAL DATA - Number of axes: 23 - Max. bar diameter: 20 mm - Spindle speed: 3,500 rpm - Spindle drive power: 15 / 18.5 kW SUB SPINDLE - Sub spindle position: 8 - Max. bar diameter: 20 mm - Travel distance: 160 mm - Max. part length: 75 mm - SLIDES - Number of cross slides: 3 * Positions: 1 / 8 / 9 * Stroke X, position 1: 50 mm Hsdpfxjwuu R Ho Ad Rjr * Stroke X, positions 8/9: 65 mm - Number of turret slides: 6 * Positions: 2 / 3 / 4 / 5 / 6 / 7 * Stroke X x Z1: 50 x 80 mm - Number of longitudinal slides: 1 * Position: 8 * Stroke Z2: 160 mm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 80 kVA WEIGHT AND DIMENSIONS - Required space: 9600 x 2500 mm - Machine height: 2200 mm EQUIPMENT - Control: FANUC PNC DECO - Sub spindle with brake - Retractable stop - Spindle stop - Chip conveyor - Coolant tank * with high-pressure pump * with paper filter - Coolant container - Bar feeder: IEMCA PRA 52F / 33

Kondisi: bekas, TECHNICAL DATA - Number of axes: 23 - Max. bar diameter: 20 mm - Spindle speed: 3,500 rpm - Spindle drive power: 15 / 18.5 kW SUB-SPINDLE - Sub-spindle position: 8 - Max. bar diameter: 20 mm - Travel: 160 mm - Max. part length: 75 mm - SLIDES - Number of cross slides: 3 * Positions: 1 / 8 / 9 * Stroke X, Position 1: 50 mm * Stroke X, Positions 8/9: 65 mm - Number of compound slides: 6 * Positions: 2 / 3 / 4 / 5 / 6 / 7 * Stroke X x Z1: 50 x 80 mm - Number of longitudinal slides: 1 * Position: 8 * Stroke Z2: 160 mm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 80 kVA WEIGHT AND DIMENSIONS - Required floor space: 9,600 x 2,500 mm - Machine height: 2,200 mm EQUIPMENT - Control: FANUC PNC DECO Hjdpfxjwuu Rys Ad Rer - Sub-spindle with brake - Retractable stop - Spindle stop - Chip conveyor - Coolant tank * with high-pressure pump * with paper filter - Bar feeder: IEMCA PRA 52F / 33

Kondisi: bekas, TECHNICAL DATA - Number of axes: 18 - Number of spindles: 6 - Max. bar diameter: 32 mm - Spindle speed: 400–5000 rpm Hjdowuu Rmjpfx Ad Rjr COUNTER SPINDLE WEIGHT AND DIMENSIONS - Footprint: 8300 x 2300 mm - Machine height: 2240 mm - Machine weight: 11,500 kg EQUIPMENT - Control: Fanuc PNC Deco - Chip conveyor: Mayfran - Coolant tank * with high-pressure pump - Bar feeder: TORNOS MSF 832/6

Kondisi: bekas, TECHNICAL DATA - Number of axes: 17 - Maximum bar diameter: 25.4 [mm] - Spindle speed: 5000 [rpm] - Spindle drive power: 18 [kW] WEIGHT AND DIMENSIONS - Required floor space: 3500 x 1600 [mm] Hjdpowuu Rgsfx Ad Ror - Machine height: 1950 [mm] - Machine weight: 8500 [kg] OPERATING HOURS - Power-on hours: 33,026 [h] ACCESSORIES - Control system: TORNOS TB DECO - Chip conveyor - Coolant tank: KNOLL * with high-pressure pump * with paper filter - Coolant reservoir - Bar feeder: TORNOS Robobar MSF 522

Kondisi: bekas, en-001 Hjdpfx Ajvm Dx Sed Rjr

Kondisi: bekas, TECHNICAL DATA Hedpfx Aevm Dx Ejd Rjr - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 10 mm - Max. machinable length: 100 mm - Spindle speed: 14,000 rpm - Spindle drive power: 10.1 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 14,000 rpm - Spindle drive power: 7 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of stations: 8 TOOL HOLDER 2 - Number of stations: 8 - Number of driven positions: 4 - Driven tool speed: 12,000 rpm FRONT TOOL POST - Number of stations: 3 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm SUB OPERATION - Number of stations: 4 - Number of driven positions: 4 - Driven tool speed: 9,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT & DIMENSIONS - Footprint: 1850 x 1140 mm - Machine height: 1,800 mm - Machine weight: 1,650 kg MACHINE HOURS - Operating hours: 32,221 h EQUIPMENT - Control: Fanuc 31i-B5 - Interface: Ethernet / RS232 / USB / PCMCIA - 3-color status lamp - Driven tool motorization on: S2, S3, S5 - Driven guide bushing - Parts extraction - Parts ejector - Coolant tank * with high-pressure pump: HP MÜLLER CL2 80 bar - Bar feeder: IEMCA ELITE 112/33 - Oil mist extraction: ELBARON - Fire extinguishing system* NB: Functionality not guaranteed. Must be checked by a qualified company at the buyer's expense.

Kondisi: bekas, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 10 mm - Max. machining length: 100 mm - Spindle speed: 14,000 rpm - Spindle drive power: 10.1 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 14,000 rpm - Spindle drive power: 7 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 8 TOOL HOLDER 2 - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 12,000 rpm FRONT TOOL POST - Number of positions: 3 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm SUB SIDE MACHINING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 9,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V Hodpfx Aovm Dxxjd Rer WEIGHT AND DIMENSIONS - Footprint: 1850 x 1140 mm - Machine height: 1800 mm - Machine weight: 1,650 kg MACHINE HOURS - Operating hours: 31,340 h EQUIPMENT - Control system: Fanuc 31i-B5 - Interface: Ethernet / RS232 / USB / PCMCIA - 3-color status light - Motorization of driven tools on: S2, S3, S5 - Driven guide bushing - Part removal - Parts ejector - Coolant tank * with high-pressure pump: HP MÜLLER CL2 80 bar - Bar feeder: IEMCA ELITE 112/33 - Oil mist extractor: ELBARON - Fire extinguishing system* NB: Functionality not guaranteed. Must be checked by a qualified company appointed by the buyer.

Kondisi: bekas, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 10 [mm] - Max. machinable length: 100 [mm] - Spindle speed: 14,000 [rpm] - Spindle drive power: 10.1 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 10 [mm] - Spindle speed: 14,000 [rpm] - Spindle drive power: 7 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 8 TOOL HOLDER 2 - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 12,000 [rpm] FRONT TOOL UNIT - Number of positions: 3 - Number of driven positions: 3 - Driven tool speed: 12,000 [rpm] BACK WORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 9,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Footprint: 1850x1140 [mm] - Machine height: 1800 [mm] - Machine weight: 1650 [kg] ACCESSORIES - Control: Fanuc 31i-B5 - Interface: Ethernet / RS232 / USB / PCMCIA - 3-color status lamp - Driven tool motorization on: S2, S3, S5 - Powered guide bush - Parts removal - Parts ejector - Coolant tank Hjdpsvm Dxrefx Ad Rsr * with high-pressure pump: HP MÜLLER CL2 80 [bar] - Bar feeder: IEMCA ELITE 112/33 - Oil mist extraction: ELBARON - Fire extinguishing system * NB: Functionality not guaranteed. To be checked by a qualified company of the buyer.

Kondisi: bekas, en-1 Hodevm Dxljpfx Ad Rjr