Beli Traub Tnd 400 bekas (96)

Kondisi: baik (bekas), Tahun pembuatan: 2001, TNK 36 th. 2001 termasuk konveyor serpihan, sistem filter Resy Godpfsxv Sr Iox Adtjtt kondisi baik, pernah beroperasi tanpa loader, tidak terhubung listrik

Kondisi: bekas, Tahun pembuatan: 2003, tnc65-1 Gtedpfexbtp Eox Adtjt

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Traub TNL 18-7B CNC Turning Automatic Base Machine: Dimensions: 2441 x 1396 mm Weight: 3800 kg Spindle Height Above Floor: 3800 mm Connected Load: 24 kW Main Spindle Max. Bar Capacity: 18 mm Max. Speed: 12,000 rpm Corner Speed: 5,000 rpm Travel Z: 205 mm Rapid Traverse: 40 m/min Positioning Accuracy Z: 0.001 mm Feed Force: 3000 N Spindle Nose / Short Taper: Traub short taper mount Max. Clamping Force: 1400 daN Max. Clamping Pressure: 40 bar Min. Clamping Pressure: 7.5 bar Piston Area: 40 cm² Total Cylinder Stroke: 5 mm Clamping Tube Thread: M25 x 1 Counter Spindle Workpiece Diameter: 21 mm Clamping Depth (Workpiece): 180 mm Max. Speed: 12,000 rpm Strokes: X: 120 mm | Y: -20/+40 mm | Z: 250 mm Rapid Traverse: X: 20 m/min | Y: 20 m/min | Z: 40 m/min Max. Clamping Pressure: 30 bar Min. Clamping Pressure: 10 bar Upper Tool Turret with B-Axis Number of Stations: 8 Shank Cross-section (Turning Tool): 16 x 16 mm Travel: X: 120 mm | Y: -25/+40 mm | Z: 250 mm Rapid Traverse: X: 20 m/min | Y: 20 m/min | Z: 40 m/min Tool-to-Tool Time: 0.5 sec Positioning Accuracy: X: 0.0005 mm | Y: 0.0005 mm | Z: 0.001 mm Lower Tool Turret Number of Stations: 7 + counter spindle Shank Cross-section (Turning Tool): 16 x 16 mm Travel: X: 120 mm | Y: -20/+40 mm | Z: 250 mm Rapid Traverse: X: 20 m/min | Y: 20 m/min | Z: 40 m/min Tool-to-Tool Time: 0.5 sec Positioning Accuracy: X: 0.0005 mm | Y: 0.0005 mm | Z: 0.001 mm Driven Tool System for Upper Tool Turret Gjdpfxewg Takj Adtstt Number of Driven Stations: max. 8 Drive Power: 2 kW Max. Speed: 12,000 rpm Torque: 3.9 Nm Driven Tool System for Lower Tool Turret Number of Driven Stations: 7 + counter spindle Drive Power: 3.4 kW Max. Speed: 12,000 rpm Torque: 7.3 Nm Driven Tool System for Rear Unit Number of Stations: 7 Number of Powered Stations: max. 3 Pitch: 46 mm Drive Power: 2 kW Max. Speed: 7,500 rpm Torque: 4.7 Nm Drive Power: 2 kW Max. Speed: 4,000 rpm Torque: 11.8 Nm SCOPE OF SUPPLY Includes (not limited to): - Traub CNC Lathe - Tool holders, driven and static - High-pressure and band filtration system - Oil mist separator - Fire extinguishing system - Chip conveyor - Bar feeder - Operating documentation Exact scope of supply as per photo series. No guarantee for the accuracy, completeness or currency of the information provided.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 8.000 rpm, saluran batang: 32 mm, model controller: Traub TX8i-S, jumlah slot dalam magazin alat: 12, Perlengkapan: konveyor serpihan, RINCIAN TEKNIS Diameter Batang yang Dapat Dimasukkan: 26 / 32 mm Kecepatan Putaran Maks. Spindel Utama: 8.000 rpm Sumbu: X1 / Y1 / Z1, sumbu C terintegrasi di spindel utama Revolver: 1 Posisi alat: 12 Daya penggerak: 6,7 kW (100% duty cycle) / 10,7 kW (40% duty cycle) Torsi: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) RINCIAN MESIN Waktu hidup: 116.721 jam Jam operasi: sekitar 48.000 jam Kontrol: Traub TX8i-S Dimensi & Berat Dimensi (P × L × T): sekitar 4,4 × 1,4 × 1,7 m Godpoxlfk Nofx Adtett Berat mesin: sekitar 4.000 - 4.200 kg PERLENGKAPAN Konveyor serbuk: sabuk engsel, tinggi pembuangan sekitar 950 mm

Kondisi: bekas, Tahun pembuatan: 1994, Fungsionalitas: fungsi terbatas, lubang spindel: 42 mm, kecepatan spindel (maks.): 4.000 rpm, daya motor spindle: 7.500 W, Mesin ini digunakan secara terus-menerus untuk memproduksi fitting hidrolik dari batang segi enam 22 (baja otomatis). Mesin sangat kaku dan efisien untuk komponen sederhana. Dilengkapi dengan attachment ulir sentuh FETTE. Tersedia dua mesin seperti ini, salah satunya dilengkapi dengan attachment pengeboran samping dan attachment milling ulir beserta set pisau frais yang besar. Termasuk paket besar chuck dan collet. Harga untuk dua mesin dapat dinegosiasikan. Gtedpfx Ajxq Rz Dedtst

Kondisi: bekas, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 Gedpfxouhawhj Adtott MAIN SPINDLE - Max. bar diameter: 13 mm - Max. machinable length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Spindle hours: 26,709 h SUB-SPINDLE - Max. bar diameter: 13 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Spindle hours: 16,854 h - Number of turret heads: 2 UPPER TURRET HEAD - Number of positions: 6 - Number of live positions: 6 - X-axis travel: 35 mm - Z-axis stroke: 50 mm - Driven tool speed: 8,000 rpm LOWER TURRET HEAD - Number of positions: 6 - Number of live positions: 6 - X-axis travel: 35 mm * Y-axis travel: -9.5 / +28 mm - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 16 kVA WEIGHT AND DIMENSIONS - Space requirement: 2,850 x 1,100 mm - Machine height: 1,480 mm - Machine weight: 2,000 kg EQUIPMENT - CNC control: Traub TX 8i - Driven guide bushing - Parts removal unit - Parts conveyor belt - Chip conveyor: KNOLL 160 S-1 - Coolant tank: 500 l * with paper filter - Bar feeder: FMB Minimag 18 / 3200 C - Oil mist extractor: UAS SMOG HOG SH-05 - Number of fixed tool holders: 5

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, jam operasional: 15.001 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 462, model controller: Traub TX8F, jumlah sumbu: 7, Perlengkapan: konveyor serpihan, pengumpan batang, CNC lathe with 7 axes, bar feeder & additional equipment! TECHNICAL DETAILS Bar length: 3000 mm Number of axes: 7 Control: Traub TX8F MACHINE DETAILS Operating hours spindle 1: 50,318 h Operating hours spindle 2: 32,922 h EQUIPMENT Main spindle Counter spindle 2 tool turrets 2x C-axis 1x Y-axis Bar feeder: IEMCA CNC BOSS 542 Enclosure Gedpfx Adsw Uiqyjtett Coolant system Chip conveyor

Kondisi: bekas, Tahun pembuatan: 1996, de-to-hu-it-lt Gtjdoxbtq Nopfx Adtjt

Kondisi: baik (bekas), Tahun pembuatan: 2002, TRAUB TNL 12/7 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Main spindle speed: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max diameter, sub spindle: 12 mm Sub spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF SUPPLY Including (list not exhaustive): Gtodpfx Aot E Dbysdtst - Traub TNL 12/7 CNC Lathe - Meyrat high-frequency spindles, 2 pieces - Tool holders (driven and static) - FMB Minimag 3200 C bar feeder - Hydraulic unit - High-pressure pump - Chip conveyor Exact scope of delivery as per photo documentation No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Kondisi: baik (bekas), Tahun pembuatan: 1993, - TRAUB control TX 8F - Spindle bore: 42 mm - Working spindle speed: 40 - 4,000 rpm - 4 cutoff slides: 60 mm stroke - 8-position turret Gjdpfxoldd Iqe Adtett - High-pressure pump: 25 bar - Rear-side machining (dual-spindle) - Bar feeder (3 m) - Chip conveyor

Tahun pembuatan: 1978, Kondisi: bekas, Article: CNC-controlled automatic lathe Brand: Traub Gsdsl Rmqtspfx Adtett Model: TF60 / 140 Year of manufacture: 1978 Bar automatic lathe Please contact us for further information and pictures via email (at) or

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, jam operasional: 49.274 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 247, panjang pembubutan: 80 mm, kecepatan spindel (maks.): 12.000 rpm, panjang pemakanan sumbu X: 35 mm, panjang umpan sumbu Y: 37 mm, panjang umpan sumbu Z: 75 mm, Diameter batang (maks.): 12 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Control: Mitsubishi TX-8i Gtjdpfx Asvrz E Hsdtst Turning length: 80 mm Main Spindle Technology: Belt-driven spindle Spindle speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12.7 mm Travel in Z1: 75 mm Workpiece clamping: Collet chuck Counter Spindle Technology: Belt-driven spindle Spindle speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222 mm / 139 mm Rapid traverse in X3/Z4: 30 m/min Workpiece clamping: Collet chuck Tool Carrier I (X/Y) Technology: Turret with 6 stations (driven) Tool holder: Ø 25 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35 mm / 37.5 mm Rapid traverse in X1/Y1: 15 m/min Front Attachment Number of stations: 4 Tool holder: Ø 28 mm Pitch: 32 mm Tool drive: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222 mm / 139 mm Rapid traverse in X3/Z3: 30 m/min Rear Attachment Number of stations: 4 Tool holder: Ø 28 mm Pitch: 32 mm MACHINE DETAILS Dimensions: 1,450 x 950 x 1,480 mm Weight: 1,600 kg Connected load: 16 kW Installation dimensions: 7,943 x 1,430 x 1,480 mm Control on-time: 96,171 h Machine on-time: 100,147 h Production time: 45,983 h Spindle 1: 49,274 h Spindle 2: 47,771 h Spindle 5: 15,297 h EQUIPMENT - Chip management: Chip conveyor - Coolant management: Coolant pump - Bar feeder: FMB minimag 3200 - Finished part discharge: Finished part discharge unit (tube) - Emulsion mist extraction: Interface mechanically prepared - Tool holders: Various fixed and driven holders

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, jam operasional: 38.433 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 489, Diameter batang (maks.): 65 mm, model controller: TRAUB TX8F, panjang batang: 3.000 mm, jumlah sumbu: 7, Perlengkapan: konveyor serpihan, pengumpan batang, Mesin CNC otomatis bubut dengan tujuh sumbu serta spindle utama dan spindle balik! RINCIAN TEKNIS Gtedjw Uiktopfx Adtot Sumbu dan spindle Jumlah sumbu: 7 Spindle utama: ada Spindle balik: ada Jumlah revolver: 2 Sumbu C: 2 Sumbu Y: 1 Kontrol: TRAUB TX8F DETAIL MESIN Jam operasi: 38.433 jam PERLENGKAPAN Majalah pengisi batang otomatis Stamag DN61 (diameter batang 65 mm, panjang batang 3 m) Sistem pendingin Pengeluaran komponen Konveyor serbuk Filter udara

Kondisi: bekas, Tahun pembuatan: 1997, Spindel lubang 80 mm Diameter putar maksimum 460 mm Gedpjxbtpxjfx Adtott Panjang putar maksimum 1.000 mm Kontrol Sistem TX 8F Kecepatan spindle maksimum 2.800 rpm Mesin bubut CNC | TRAUB - TNA 500 Mesin dalam kondisi terawat dan dapat diperiksa dalam keadaan terhubung listrik kapan saja. Data teknis mesin akan segera menyusul. Mohon pengertiannya! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA500 | TNA-500

Kondisi: baru, 3 safety windows suitable for CNC lathes TRAUB Gjdsw Edq Dopfx Adtjtt TNA 300 TNA 400 TNA 500 TNC 42 TNC 65 Dimensions: 660 x 480 mm Price: €500.00 / each net Delivery time: immediate, subject to prior sale Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Kondisi: bekas, Grinding wheel dresser, cup wheel dresser, bench grinder dresser, surface grinding machine dresser, cylindrical grinding machine dresser, dressing head, truing head for grinding machines - Quantity: 1x wheel dresser available - Price: per piece - Dimensions: 325/130/H135 mm - Weight: 7.3 kg Gtsdpfx Adod R Ikdjtst

Kondisi: sangat baik (bekas), CNC machine Traub TNL 26 Condition: used, well maintained Sale without any warranty Gtodpfx Adshlp Sdstst

Kondisi: bekas, Tahun pembuatan: 1990, Turning diameter 250 mm Gtedpfx Adot Hwq Djtst Turning length 450 mm Control system TX8D Spindle bore 80 mm Spindle speed: 3,150 rpm CNC bar turning machine with 3 turrets Extra-large spindle bore, equipped with bar loader

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 364, model controller: Traub TX8F, jumlah sumbu: 7, Perlengkapan: konveyor serpihan, pengumpan batang, CNC lathe with 7 axes, bar feeder & additional equipment! TECHNICAL DETAILS Bar length: 3000 mm Number of axes: 7 Control: Traub TX8F MACHINE DETAILS Operating hours spindle 1: 50,318 h Operating hours spindle 2: 32,922 h Godpfx Adew Ec Aletjtt EQUIPMENT Main spindle Counter spindle 2 tool turrets 2x C-axis 1x Y-axis Bar feeder: IEMCA CNC BOSS 542 Enclosure Coolant system Chip conveyor

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 5318, lubang spindel: 26 mm, kecepatan spindel (maks.): 4.750 rpm, TECHNICAL DETAILS Max round diameter: 26 mm Max square size: 18 mm Max hexagon size: 22 mm Spindle power: 2.2 kW Gjdpfx Adjwtq Urotstt Number of spindles: 4 Spindle bore: 26 mm Speeds: 1,180 – 4,750 rpm Tool holder: 6 slots MACHINE DETAILS Length (L – R): 1,800 mm Width (F – B): 1,000 mm Height: 1,400 mm Weight: 800 kg Total power consumption: 3.2 kW Operating voltage: 380 V, 50 Hz

Kondisi: bekas, Tahun pembuatan: 1989, Control system / Centre distance // mm Swing diameter over bed / mm Control system: TRAUB System TX-8 Gtjdpfx Aeud Inmsdtot Max. bar capacity (spindle bore) mm 42 Chuck diameter mm 200 Turning diameter mm 180 Turning length mm 450 Max. swing diameter mm 450 Swing diameter over sorting device mm 350 Swing diameter over cross-set tailstock mm 180 Swing diameter over steady rest body mm 240 Longitudinal slide travel | mm 490 Cross slide travel mm 160 Spindle nose DIN 55.026 = 26 - Spindle diameter in front bearing mm 85 Power: 41 kW

Kondisi: baik (bekas), Max. bar passage: 36 mm Max. spindle speed: 6,300 rpm Number of spindles: 2 Control: Traub TX8i Tool Turret 1: Number of tools: 12 X-axis: 50 mm Z-axis: 50 mm Front Tool Turret: Number of tools: 7 Speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis: 370 mm Z-axis: 250 mm Rear Tool Turret: Number of tools: 5 Speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Gjdpstrvzxofx Adtett Mounting diameter: 40 mm X-axis: 73 mm Bar feeder: FMB Turbo 5-42 Bar length: 3,200 mm Bar diameter: 5 - 42 mm Country of origin: Germany Machine dimensions (LxWxH): 3,400 x 1,300 x 1,700 mm Machine weight: 4,000 kg

Kondisi: baik (bekas), Tahun pembuatan: 2005, jam operasional: 32.870 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6030578, diameter pembubutan: 32 mm, kecepatan spindel (maks.): 8.000 rpm, Diameter batang (maks.): 32 mm, We offer for sale a Traub TNL26K automatic lathe. The machine is connected to power and can be inspected in operation by prior appointment. Year of manufacture: 2005 Spindle bore: 32 mm Gtjdpfx Aovldx Ajdtst Main spindle: 6.7/10.7 kW; 8000 rpm Counter spindle: 6.7/10.7 kW; 8000 rpm Upper turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24 kW Bar feeder: FMB Turbo 5-42/4200 mm Swarf conveyor: Knoll 240 S1/100 Coolant compact band filter: Resy The machine comes with a large number of both static and driven tool holders—the list is shown in the attached photo.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 25//16455, kecepatan rotasi (maks.): 2.800 rpm, kecepatan rotasi (min.): 1.400 rpm, panjang pembubutan: 65 mm, TECHNICAL DETAILS Turning length: 65 mm Thread length: 40 mm Maximum part length: 65 mm Spindle speeds: 1,400–2,800 rpm MACHINE DETAILS Gtsdpfx Adowtq Ulotet Total power requirement: 2.6 kW Machine weight: 0.7 t Space requirement: 1,200 x 700 x 1,600 mm Main voltage: 415 V

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 42 mm, panjang pembubutan: 206 mm, TECHNICAL DETAILS Spindle power: 5.5 - 9 kW Max. workpiece length: 206 mm Gtedpowtq Ufofx Adtst Spindle bore: 42 mm Tool turret: 4 stations MACHINE DETAILS Length (L - R): 2,500 mm Width (F - B): 900 mm Height: 1,700 mm