Beli Turncraft Mesin Bubut bekas (78.536)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Schaublin 150 High-Precision Lathe with 2-axis Digital Readout ND780 Technical Specifications: >> Year of manufacture: approx. 1980 >> Centre height: 150 mm >> Centre distance: 630 mm Kjdpfx Aewynluea Nsdg >> Swing over bed: 340 mm >> Spindle nose: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025 - 0.35 mm/rev >> Metric threads: 0.25 – 14 mm >> Tailstock: MT3 >> Infinitely variable spindle speeds: 55–3000 rpm >> Rapid traverse motor: 1500 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> 3-jaw chuck 160 mm, 1 set of jaws >> Multifix B, 3 tool holders >> Collet chuck with collets >> Change gears >> Stops >> Coolant system >> 1 box of spare jaws >> Centres >> Operating manual About the machine: For sale is a Schaublin 150 high-precision lathe. The machine is operational, equipped with rapid traverse, and is in good used condition. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis K&C Digital Readout, NEWLY Overhauled with Acceptance Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Center Height: 180 mm >> Distance Between Centers: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Threads Possible: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Engagable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis K&C digital readout, new, 12 months manufacturer’s warranty, with operator manual Kjdpfx Aaevrckqo Njdg Functions: Switching mm/inch, Coordinate selection ABS/INC, halving of display value, reference point, tool programming (200 tools), taper calculation, radius/diameter display, quick zeroing, counting direction switch >> 200 mm wedge-bar chuck, nearly new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine mounts >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stop buttons Upon request: Guards for lead and feedscrew About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Acceptance with inspection protocol. Paint finish: 2K high-gloss white. Multifix and chuck are new. For safety: This machine has a brake motor, electronic spindle protection, and two emergency stop buttons—an as-new condition lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Shaft Bench Lathe in Excellent Condition!!! Technical Data: >> Machine No. 2801 >> Centre Height: 120 mm >> Centre Distance: 430 mm >> Speed Range: 60 – 3000 rpm in 18 gear steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 55027 >> Tailstock MT 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting options: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 piece Röhm 3-jaw chuck 125 mm with 4 sets of jaws >> Collet clamping device with collets from 2 mm to 12 mm in 1 mm increments with draw tube >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady >> Faceplate >> Spindle guard >> Clamping tools Kedpsv Tyzcefx Aa Nsdg About the Machine: For sale is a Weiler Primus lead and feed shaft bench lathe in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a government-operated facility where it saw little use. This newer generation of Weiler lathes is very operator-friendly and allows for ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see its condition for yourself. (The base cabinet is included; it is not bolted to the machine.) Digital readout available at extra cost.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Data: Kdodpevv Etvefx Aa Nog >> Year of manufacture: approx. 1970 Machine No. M1012 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 30 – 3550 rpm >> Spindle bore: 36 mm >> Short-taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper: MK 3 >> Feeds: 0.010 to 1.184 mm/rev >> Possible thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 15 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> Collet chuck with 32 collets (set is incomplete) with adapter >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 1 set of jaws >> Multifix tool post size A with 2 tool holders >> Change gears >> Bed stop About the Machine: Offered here is a used Weiler Matador VS-2 in full working condition. Take the opportunity to inspect and test the machine under power on site to verify its condition.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Emcomat 17D Lead and Feed Screw Lathe, 3-Axis Digital Readout K&C, New from Training Workshop, Excellent Condition!!! Kdsdpowvuf Tefx Aa Neg Technical Data: >> Year of manufacture: approx. 2000 Machine No. D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges from 35-3000 rpm, infinitely variable >> Tailstock quill travel: 120 mm >> Tailstock: Morse taper 3 (MT3) >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Required space / footprint: approx. Length 1.6 x Depth 0.9 x Height 1.3 m >> Weight: approx. 730 kg Accessories and Equipment: >> New 3-axis digital readout by K&C, 12-month manufacturer's warranty, with operating manual Functions: Metric/inch switch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switch >> 1 pc. new 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix B toolholder with 2 holders >> Chip guard/rear splash guard >> Coolant system About the machine: For sale is an Emcomat 17D lead and feed screw lathe, approx. year of manufacture 2000, in excellent condition. The machine is, of course, fully functional. The bed ways are in very good condition. The Emco is equipped with a new 3-axis K&C digital readout and a new 3-jaw chuck. Take advantage of the opportunity to view this machine under power on site and convince yourself of its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C - NEW Geometrically overhauled with acceptance protocol for new machine tolerances! Technical Data: >> Machine No. 90-1495 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter selection, quick zeroing, counting direction selection >> Collet chuck system, new collets from 3 to 26 mm in 1 mm steps >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix quick-change toolpost, new, size A, with 2 new tool holders >> Bed stop >> Electric chuck guard, new >> Machine lamp, LED, new >> Rear splash guard >> Operating manual >> Coolant device >> Machine levelling feet Kdodpevambcjfx Aa Nsg About the Machine: For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, absolutely as-new condition. The guideways have been newly ground and hand-scraped. Acceptance as per inspection protocol. A very fine machine with electronic spindle guard. The accessories—collets, chuck, Multifix—are new. Spindles, nuts, bearings, belts, and wipers have been renewed. Take the opportunity to view this machine under power on site and see the condition for yourself.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant 160B Precision Centre Lathe with 3-Axis K&C Digital Readout, NEW. Overhauled, including acceptance protocol certifying new-machine tolerances. Technical Specifications: >> Machine No.: 87 160 760 >> Centre height: 160 mm >> Distance between centres: 650 mm >> Spindle speeds: 24 to 2,500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5, with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Electrically selectable spindle brake >> Dimensions (LxHxW): 1.6 m x 1.25 m x 0.7 m Equipment & Accessories: Kdodpfx Ajvrdlcoa Neg >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty, incl. operation manual Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, selectable count direction >> New collet chuck, NEW collets 3–25 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix tool post size A, with 3 steel holders >> Electronic spindle guard >> NEW LED machine lamp >> NEW machine mounts >> Splash guard >> Operating manual and spare parts plan (PDF) About the Machine: Offered is a Weiler Praktikant 160 B engine lathe with leadscrew and feedscrew, reconditioned to toolroom accuracy and fully geometrically overhauled, including an acceptance protocol confirming new-machine tolerances. Safety features: electronic spindle guard, covers for leadscrew and feedscrew, 2 emergency stop buttons, and a braking motor. This latest generation of Weiler lathes is highly user-friendly and enables ground-like surface finishes. Take the opportunity to inspect and test the machine under power onsite to verify its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor 81, lead and feed screw lathe with 3-axis digital readout from K&C, NEW Geometrically overhauled with acceptance protocol covering new machine tolerances Technical Data: >> Machine No. 84-121 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027 size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Features: Kdedpfswrm Dtox Aa Nog >> 3-axis digital readout by K&C, new, 12 months manufacturer warranty, with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter mode, quick zeroing, direction reversal >> Collet chuck new, collets new from 3 to 26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix size B, new, with 3 toolholders >> Bed stop >> Electrical chuck guard, new >> Rear chip guard >> Operators manual >> Coolant system >> Machine levelling pads About the Machine: Offered is a Weiler Condor 81 lead and feed screw lathe in excellent, geometrically overhauled condition. The bedways have been reground and/or hand-scraped as new. Delivery with inspection protocol. Accessories such as collets and chuck are new. Safety features: The machine is equipped with a braking motor, electronic spindle guard, and two emergency stop switches – making it an as-new condition lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like finish surfaces to be produced. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, en-Weiler Praktikant 160 B Leadscrew and Feed Shaft Lathe with 3-Axis Digital Readout K&C NEW Technical Data: >> Year of manufacture: 1986 Machine no.: 86-160-348 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds (8 steps): from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.02 to 0.63 mm/rev >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake selectable >> Length: 1.6 m, Height: 1.25 m, Depth: 0.7 m Accessories and Features: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck, collets as new from 1 to 29 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear splash guard >> Machine feet >> Coolant system About the Machine: Ksdpfx Aswthbisa Njdg A Weiler Praktikant 160 B leadscrew and feed shaft lathe is being offered here, built to toolmaker’s precision and in very good condition. The machine is, of course, fully functional. The Weiler has been completely dismantled and newly painted in light grey. All cross slides move very smoothly and evenly. The Weiler also runs smoothly at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and capable of producing ground-like surface finishes. Take the opportunity to view the machine under power on site and see the condition for yourself.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, Emcomat Emco EM20D Lead and Feed Screw Lathe, Year of Manufacture 1995, Excellent Condition, CE Compliant!!! Technical Data: >> Year of manufacture: 1995 >> Centre height: 200 mm >> Swing over bed: 400 mm >> Swing over cross slide: 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 ranges, continuously variable from 35–3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: Morse taper 3 (MT3) >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required space / dimensions (approx.): Length 1.900 x Depth 0.9 x Height 1.3 meters >> Weight approx. 850 kg Ksdjwag Stepfx Aa Nodg Accessories and Equipment: >> 3-axis digital position display >> 1 three-jaw chuck with 1 set of jaws >> Toolholder with 3 tool pockets >> Chip guard >> Coolant system >> Bed stop About the Machine: For sale is an Emcomat 20D lead and feed screw lathe, year of manufacture 1995, in a scarcely used condition. The machine is, of course, fully functional. All carriage movements are very smooth and even. The bed ways are in excellent condition. Take advantage of the opportunity to view this machine under power on site and see the condition for yourself.

Tahun pembuatan: 2020, Kondisi: siap digunakan (bekas), Data Umum Berat mesin: 3850 kg Tinggi mesin: 1921 mm Unit Kontrol Merek: SIEMENS Model: SINUMERIK 828D Dimensi Panjang mesin: 2880 mm Penggerak Utama Jumlah sumbu: 3 Kecepatan spindle: 6000 RPM Daya motor spindle: 15 kW Pergerakan Pergerakan sumbu X: 205 mm Pergerakan sumbu Z: 560 mm Pergerakan sumbu Y: 105 mm Spesifikasi Teknis Alat berpenggerak: ya Kdodex D Dkrjpfx Aa Njg DOOSAN LYNX 2100LYA 3-sumbu ini diproduksi pada tahun 2020, dilengkapi dengan ukuran chuck 6 inci, diameter pembubutan maksimum 300 mm, dan panjang hingga 510 mm. Memiliki kecepatan rapid traverse 30 m/menit pada sumbu X dan 36 m/menit pada sumbu Z, dengan kecepatan spindle hingga 6000 rpm. Manfaatkan kesempatan untuk membeli mesin bubut horizontal DOOSAN LYNX 2100LYA ini. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Pembubutan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jam operasional: 3.728 h, kecepatan spindel (maks.): 4.000 rpm, jarak pergerakan sumbu X: 213 mm, jarak lintasan sumbu Y: 51 mm, jarak gerak sumbu Z: 572 mm, daya motor spindle: 149.000 W, Diameter batang (maks.): 64 mm, produsen pengendali: HAAS, model controller: NGC, jumlah slot dalam magazin alat: 12, sudut putar poros C (maks.): 360 °, jumlah sumbu: 4, Unit Kontrol Merek: HAAS Model: NGC Penggerak Utama Diameter lubang spindle: 88,9 mm Jumlah sumbu: 4 Kecepatan spindle: 4000 RPM Daya motor spindle: 149 kW Gerakan Gerak Sumbu X: 213 mm Gerak Sumbu Z: 572 mm Gerak Sumbu Y: 51 mm Gerak Sumbu C: 360º Peralatan Jumlah slot alat: 12 Spesifikasi Teknis Diameter batang maks.: 64 mm Alat penggerak: ya Kedex D Hn Tspfx Aa Nsdg Mesin bubut HAAS ST-20Y ini, diproduksi tahun 2019, dilengkapi dengan sumbu Y, tailstock, sistem probe alat otomatis, dan konveyor chip. Dengan kecepatan spindle hingga 4000 rpm dan alat penggerak yang didukung oleh sumbu C, mesin ini menawarkan kemampuan unggul untuk pekerjaan pembubutan kompleks. Jika Anda mencari solusi bubut berkualitas tinggi, pertimbangkan HAAS ST-20Y yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Pembubutan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Nakamura Tome WT 250 Mesin Bubut CNC (2008) Produsen: Nakamura Tome Tipe: WT 250 Mesin Bubut CNC Tahun pembuatan: 2008 Kondisi: bekas, baik, dalam keadaan terpasang dan berproduksi Kontrol: Fanuc 18i 4 Sumbu: X, Y, C, Y 2x Spindel 2x Turret (terpasang) Diameter pembubutan: 250 mm Panjang pembubutan: 555 mm Kecepatan spindel utama: 50-4.500 rpm Kecepatan spindel tandingan: 5.000 rpm Kepala turret 1+2: 24 stasiun, masing-masing dengan 12 posisi penggerak Portallader GR 203 Kedpfxex Tir Ns Aa Nedg Sistem filter sabuk Konveyor serbuk Dokumentasi Peralatan Aksesori

Kondisi: baru, Tahun pembuatan: 2025, CONDOR VC plus The new benchmark in conventional precision lathes. A high-quality, high-performance, and energy-efficient precision lathe designed for high-productivity applications in production and toolmaking, as well as for training and education purposes. Superior quality, energy efficiency, precision, and universal suitability for use in production, training, and further education. Key features include: - Future-oriented technology - Exceptional accuracy - Long service life - Operator-friendly ergonomics - Minimal space requirements - Comprehensive range of accessories The consistent and innovative advancement of the proven Condor series represents an economical and intelligent solution for your daily machining needs. Technical Specifications: WORKING AREA Centre height 180 mm Swing over bed 360 mm Swing over cross slide 190 mm Distance between centres 800 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3 Size 6 Spindle bore 57 mm Spindle diameter at front bearing 90 mm MAIN DRIVE Drive capacity at 60%/100% duty cycle – / 10.5 kW Speed range 25 – 4,000 rpm Number of speeds Infinitely variable FEED RANGE Number Infinitely variable Longitudinal 0.01 – 6 mm/rev Cross 0.003 – 2 mm/rev THREAD CUTTING RANGE Metric threads 0.1 – 20 mm TAILSTOCK Quill diameter 50 mm Quill stroke 110 mm Quill taper DIN 228 MK 3 ACCEPTANCE ACCURACY DIN 8605 Equipped with WEILER WTS 15 VC plus touchscreen display - Large, clearly arranged 15" touchscreen, rotatable and pivotable, 1366 x 768 resolution - Switching between operating screens via swipe gesture - Operating functions accessible through App Manager - Operating panels can be freely configured, placed, and scaled - Import of drawings/sketches from PDF files via USB interface, individually zoomable - Video-assisted maintenance support - Contextual help menu Kedpfoqwipnox Aa Nsdg (instead of WEILER VC plus display) The machine is available immediately and can be viewed at our showroom in 71334 Waiblingen-Beinstein. For further information regarding equipment options, please contact us.

Kondisi: baik (bekas), Used lead and feed screw lathe COLCHESTER MASTER 3250 Centre height: 170 mm Centre distance: 650 mm Spindle bore: 42 mm Infinitely variable speed from 15 to 3250 rpm 1 x SCHUNK wedge bar power chuck Ø160 mm 1 x MULTIFIX tool holder size B with 4 inserts Machine light, chuck guard with electrical interlock, machine feet 1 x revolving centre, 1 x revolving centre with pressure gauge Kodpfxeuqkf No Aa Njdg 1 x drill chuck with taper shank The machine is located at our facility in 71334 Waiblingen-Beinstein and is immediately available. Viewing is possible by appointment.

Kondisi: baru, Praktikant VC plus The new dimension in the field of conventional precision lathes. High-quality, energy-efficient, precise, and universally applicable for production, training, and further education. Its strengths include: forward-thinking technology maximum precision long service life operator-friendly ergonomics minimal space requirements and comprehensive accessories Ksdpfxohw N Nte Aa Nedg The consistent and innovative further development of the proven Praktikant series offers an economical and intelligent solution for your daily applications. Technical Data: WORKING AREA Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Distance between centers: 650 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3: Size 5 Spindle bore: 43 mm Spindle diameter at front bearing: 70 mm MAIN DRIVE Drive power 60%/100% duty cycle: – / 8 kW Speed range: 25 – 5,000 rpm Number of speeds: stepless FEED RANGE Number: stepless Longitudinal: 0.01 – 6 mm/rev Cross: 0.003 – 2 mm/rev THREAD CUTTING RANGE Metric threads: 0.1 – 20 mm TAILSTOCK Quill diameter: 40 mm Quill travel: 85 mm Morse taper DIN 228: MK 3 ACCEPTANCE ACCURACY: DIN 8605 Equipped with WEILER screen display WTS 15 VC plus - Large and clear 15" touchscreen, rotatable and swiveling, resolution 1366 x 768 - Operation screens switched via swipe gestures - Operation functions accessible via app manager - Control fields can be freely configured, positioned, and scaled - Drawings/sketches in PDF format can be imported via USB and individually zoomed - Video-assisted machine maintenance - Context help menu (instead of the WEILER VC plus screen display) - Coolant system, 18 liters including coolant pump The machine is located at our showroom in 71334 Waiblingen-Beinstein and is available immediately. For equipment details, please contact us.

Kondisi: baru, Tahun pembuatan: 2025, Intern GSD One of the best-selling and most popular conventional precision lathes Distinguished by: sophisticated engineering highest precision long service life proven ergonomic design minimal footprint and extensive accessories. Proven over decades in single-part and small series production, in both craft and industrial settings, for training and professional development, and in tool and fixture construction. Centre distance: 650 mm Centre height: 160 mm Automatic handwheel disengagement Leadscrew and feed rod protection Main spindle brake Toolroom accuracy according to DIN 8605 Two-speed brake motor Headstock gear transmission 16 fixed spindle speed levels Digital position display (optional) LED machine lamp TECHNICAL DATA: Kdedpfx Aajwhzcps Neg WORKING AREA Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Centre distance: 650 mm LATHE SPINDLE Spindle nose DIN 55027/DIN ISO 702-3: Size 5 Spindle bore: 43 mm Spindle diameter at front bearing: 70 mm MAIN DRIVE Drive power 60% / 100% DC: 2.6 / 3.1 kW Speed range: 48 – 2,500 rpm Number of speed steps: 16 FEED RANGE Number: 24 Longitudinal: 0.02 – 0.63 mm/rev Cross: 0.006 – 0.2 mm/rev THREAD CUTTING RANGE Metric threads: 0.25 – 8* mm TAILSTOCK Quill diameter: 40 mm Quill travel: 85 mm Taper according to DIN 228: MK 3 ACCEPTANCE ACCURACY: DIN 8605 * Inch and metric pitches 0.45; 0.75; 4.5 and 5.5 mm only possible with additional change gears. The machine is located in our showroom in 71334 Waiblingen-Beinstein and is immediately available. For equipment details, please contact us.

Kondisi: bekas, Tahun pembuatan: 2003, nomor mesin/kendaraan: 1527, mesin bubut poros utama dan poros penuntun bekas COLCHESTER Triumph VS 2500 Tinggi senter: 195mm Panjang benda kerja antara senter: 650mm Kdjdpfxjx Hrume Aa Njg Lubang spindle: 54mm Kecepatan variabel tanpa tingkat dari 14-2500 rpm Pinol kepala lepas MK5, perangkat pendingin, perangkat pemotong ulir cepat Display digital FAGOR NUP 300 TS-RS 1 x chuck tiga rahang RÖHM, pembatas drum 5 posisi, pembatas spindle berlubang Lampu mesin, 1 x kepala revolver PARAT 4 posisi, 4 x dudukan alat ganti PARAT center yang ikut berputar dan chuck bor quick-change Mesin tersedia di lokasi kami di 71334 Waiblingen-Beinstein dan siap langsung digunakan. Peninjauan mesin dapat dilakukan dengan perjanjian.

Kondisi: bekas, Tahun pembuatan: 2000, gebrauchte-condor-ac-teilueberholt Kjdpex E Um Nsfx Aa Nsdg

Kondisi: bekas, nomor mesin/kendaraan: 11756, Used lead and feed screw lathe WEILER LZ 280 Center height: 125 mm Distance between centers: 800 mm Spindle speeds: approx. 26-2000 rpm Includes: - 1 x 3-jaw chuck Ø 125 mm with inside and outside jaws, brand new - Multifix size A with 2 toolholders - Emergency stop/switch unit - Rear chip guard plate - Complete set of change gears - Catch plate - Tray - Machine lamp - New socket outlet - 15 collets from Ø 3.5 - 18.5 mm, collet clamping tube - Fixed center and MT2 sleeve for clamping tube - Bed stop Kdjdjvd Dbnspfx Aa Nsg - Chuck guard - Various turning tools and operating manual The machine is located at our premises in 71334 Waiblingen-Beinstein and is immediately available. An inspection of the machine can be arranged by appointment.

Kondisi: bekas, nomor mesin/kendaraan: 1717, used lead and feed screw lathe WEILER PRAKTIKANT Centre height: 140 mm Centre distance: 500 mm Spindle bore: 36 mm Spindle speeds: 42-2,000 rpm Equipped with RSF 3-axis digital readout, one 3-jaw chuck Ø160 mm, Kdjdpfx Ajuqb Emsa Nsg Chuck guard with electrical interlock, Multifix tool post size A with 3 holders Lever-operated collet chuck with 15 collets. The machine is located at our facility in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 36 mm, tinggi pusat: 155 mm, panjang pembubutan: 800 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 25 rpm, Used centre lathe Weiler Condor, No. 7939 Centre height: 155 mm Centre distance: 800 mm Spindle speeds: 12–2800 rpm Spindle bore: 36 mm Ksdpfx Aaev R Tdxe Nodg Accessories: - 1x 3-jaw chuck RÖHM Ø 160 mm - Multifix base body size B with 2 tool holders - Keyless drill chuck - Live centre and coolant system The machine is located in our warehouse in 71334 Waiblingen-Beinstein and is immediately available.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Kontroler CNC: M720BM Kapasitas Pergerakan sumbu X mm: 260 Pergerakan sumbu Y mm: ±50 (100) Pergerakan sumbu Z mm: 795 Panjang pembubutan mm: 705 Diameter pembubutan maks mm: ø 356 Putaran di atas pelana mm: ø 923,8 Putaran di atas palang geser mm: 755 Kapasitas pengerjaan batang mm: 80 Sumbu C derajat: 0,001° Menara atas Jumlah slot alat buah: 12 Kecepatan alat putar RPM: 6.000 Daya penggerak alat putar kW: 5,5/3,7 (3 menit/kontinuitas) Waktu indeks detik: 0,25 Spindel utama Kecepatan spindel RPM: 4.000 Daya penggerak spindel kW: 18,5/15 (25% ED/kontinuitas) Lubang spindel mm: ø91 Ekor mesin Pergerakan tailstock mm: 734 Pemegang: MT5 Perlengkapan Konveyor serbuk sisa (chip conveyor) Lengan pengukur alat Kjdpfsxcqz Iox Aa Nedg

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), - BEKAS - MESIN BUBUT CNC 2-SUMBU Kdjdjx E Einopfx Aa Neg MAKS DIAMETER PUTAR: 620 mm MAKS PANJANG PEMBUBUTAN: 650 mm MAKS DIAMETER PEMBUBUTAN: 380 mm KAPASITAS BATANG: 80 mm SPINDEL: 30-3000 rpm; 22-26 kW; ASA 8"; 315 mm PERGERAKAN SUMBU X: 220 mm PERGERAKAN SUMBU Z: 650 mm GERAK CEPAT X-Z: 20 - 24 m/menit KEPALA REVOLVER: 12 POSISI UNIT KONTROL: FANUC 31iT BERAT: 6000 kg DIMENSI KESELURUHAN: 4000 x 1900 x 1850 mm AKSESORIS: KONVEYOR SERPIHAN

Kondisi: bekas, Tahun pembuatan: 2011, produsen pengendali: Mitsubishi, model controller: TX-8i, Description: Main spindle: Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 15 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Counter spindle: Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Kdjdpsx E Inmsfx Aa Nsg Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool turret I (X/Y): Technology: Turret with 6 stations (fully driven) Tool holder: ø25 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool turret II (X/Z): Technology: Turret with 6 stations (fully driven) Tool holder: ø25 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front attachment: Number of stations: 4 Tool holder: ø28 mm Pitch spacing: 32 mm Tool drive: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear attachment: Number of stations: 4 Tool holder: ø28 mm Pitch spacing: 32 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: Coolant pump Raw material feed: Bar feeder, FMB minimag 20/3200 Finished part discharge: Workpiece discharge unit (tube) Emulsion mist extraction: Interface mechanically prepped Toolholders: Various fixed and driven holders