Beli Universal Membosankan Mesin bekas (77.519)

Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm Machine was overhauled according to Kellenberger measurement protocol and newly painted. Hedpfx Alovq R Uzj Ijl The prone-to-failure Güttinger control was replaced by the modern BEMA X control system. This means the machine also received completely new electrics during this process. The machine is equipped with a reinforced workpiece headstock for supported grinding of heavy workpieces. Please note: The machine currently does not meet the basic safety and protection requirements as stipulated in BetrSichV 2015. Raising the required minimum safety standard must be determined through a risk assessment according to BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter 250 mm Grinding length 400 mm Centre height 125 mm Control Fanuc 21i-T Machine serviced and partially overhauled. Hjdovx Dvuopfx Al Isl - New grinding spindle bearings - New X-axis spindle - Upper table re-ground - New table geometry - New geometry from workpiece headstock to grinding spindles B-axis with 1° Hirth serration Longitudinal positioning HF internal grinding spindle GAP Paper band filter

Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter: 630 mm Hsdpev Dxxzefx Al Ijl Grinding length: 600 mm Centre height: 320 mm Machine equipped with reinforced workpiece spindle head for unsupported grinding of heavy workpieces. The machine undergoes a major maintenance/partial overhaul including geometry inspection protocol in accordance with the Kellenberger new machine directive. At present, the machine does not comply with the essential health and safety requirements set out in BetrSichV 2015. An adjustment to the required minimum safety level must be determined by means of a risk assessment as per BetrSichV.

Kondisi: bekas, Grinding diameter: 350, 450 mm Grinding length: 600 mm Centre height: 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding spindle head swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed (per stroke): 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±10° Table longitudinal movement: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – flying: 130 kg incl. clamping Internal spindle mount: 70 mm Total connected load: 6.5 kW Machine weight approx.: 2.2 t Floor space required approx.: 3.1 x 2.0 m As a world leader in Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new condition with warranty, but can also provide service for your machines, fully overhauled to metric standards and newly painted. Photo shows a previously delivered machine, possibly with different options. The machine is equipped as standard with central lubrication and roller guideways in the X-axis flat bed, as well as air lift-off in the grinding spindle stock. BEMA standard features include: - 2-axis digital readout. X-axis resolution: 0.5 μm - Grinding spindle speed display - Stepless speed control for the grinding spindle, 70–100% - Stepless speed control for the internal grinding spindle, 70–100% - Workpiece spindle drive by three-phase motor, continuously variable via frequency converter Optional features (at extra cost): - Encoder with digital display in the workpiece headstock - Encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - Sine bar - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height up to max. 225 mm - Speed control for grinding spindle Hsdpjd Ih D Eefx Al Isl Included: - Operating tools - Clamping tube for chuck Of course, our fully overhauled machines come with a 12-month warranty (valid only for neighboring countries). Further accessories available on request. At present, this machine tool does not comply with the fundamental safety and protection requirements as specified in BetrSichV 2015. The necessary minimum safety level must be determined by a risk assessment pursuant to BetrSichV.

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Hsdpev I Eq Sjfx Al Isl Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (overhung): 130 including clamping unit kg Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space required approx.: 4.2 x 2.0 m Immediately available, naturally with a 12-month warranty! Geometrically overhauled and repainted with new electrics. In KELLENBERGER quality!!! - Digital display on 2 axes. Resolution on the X-axis: 0.5µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Additional accessories available on request The machine tool does not currently meet the basic safety and protection requirements as specified in BetrSichV 2015. An increase to the required minimum safety objective must be determined via a risk assessment according to BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2010, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Control: Fanuc 310is Completely mechanically overhauled. Including grinding process and setup for one workpiece. Original photo of the machine from EMO 2010. CNC control: GE Fanuc 310is Hand panel for CNC control GE Fanuc With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel assembly left: 500 x 80 mm Grinding wheel assembly right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing device on the upper table Swivelling holder for PCBN diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing devices KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece spindle for internal and external grinding Hodpfsvdk N Esx Al Ijl Provisions for measurement controls Movomatic ESZ 400 or Marposs P7 ME Preparation for external filter Coolant shut-off for table units Fully enclosed for emulsion Mist extraction unit for emulsion Maintenance unit for pneumatic auxiliary functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: Measuring probe C25 Hydraulic preparation for arbour steady rest

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Space requirement approx. 3.6/3.5 m Photos show an identical machine with 225 mm centre height Base Model: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - B-axis infinitely variable, high resolution - Marposs measurement system for tool setting - Active longitudinal positioning - GAP control at T1 and T2 from ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt-driven Options at Additional Cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (lead time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic leadscrew in X - New hydrostatic system with only one pump and accumulator for better energy efficiency - Monitoring of water content in the hydrostatic system - Extraction unit Other options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New state-of-the-art CNC cylindrical grinder control system with BEMA cylindrical grinding interface - Rebuilt control cabinet - New drive technology - Replacement of all electrical wiring, Berus pressure switch, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a basic license and various options depending on the machine’s equipment. Basic software - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zeroing - Grinding wheel zeroing - Measurement of dressing diamonds - Two form diamonds - One form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - Three flat dressers - Corrections - Z-position measurement (probe required) - GAP touch detection (touch dressing device required) OPTIONS at additional cost: Software for profile plunge grinding: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single and multi-start external and internal thread grinding with threads dressed on the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Non-circular grinding software: Hjdpfx Asuxfucsl Iol Non-circular grinding requires the workpiece axis to be equipped with a high-resolution rotary encoder to operate the axis as a C-axis. The non-circular...

Kondisi: bekas, Tahun pembuatan: 1995, schleifmaschine-parameter-2024 Hsdjyatx Sepfx Al Isl

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MT5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivelling 360° Grinding headstock swivelling 180° ± Grinding spindle speeds 1500, 1700, 2200 rpm Plunge feed: incremental 0–9.99 mm/Ø Plunge feed: continuous 0–9.99 mm/Ø Table swivelling ±8° Longitudinal table travel 1100 mm Table speed 0.02–6 m/min Workpiece weight between centres 130 kg Cross travel max. 270 mm Workpiece weight max. (flying) 130 kg incl. clamping Internal spindle mounting 80 mm Tailstock quill mounting MT3 Quill travel 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo shows a previously delivered machine. -The touch panel operation is extremely user-friendly. -The icons on the control panel are virtually identical to the original control, so no retraining is required. -Diagnostic function with display of PLC messages and digital I/Os. -Dressing function can be extended or modified to customer requirements. -Workpiece spindle oriented stop available on request. -New maximum infeed amount: 40 mm, extendable upon request. Hjdpfxouxfups Al Isl -Digital display on 2 axes. X-axis resolution 0.5 µm. Options: -Encoder with digital display on the workpiece headstock -Encoder with digital display on the grinding headstock (no height adjustment with spindle possible) -New stable internal grinding attachment diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for grinding spindle Includes: -Operating tools -Clamping tube for chuck Further accessories available upon request. The machine is equipped with an electronically controlled feed system in the X-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face and internal grinding in a single setup of individual parts. Available options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measuring control At the present time, the machine tool does not comply with the essential safety and protection requirements as specified in the BetrSichV 2015. The required minimum safety objectives must be determined by a risk assessment in accordance with the BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2006, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Machine weight approx. 3.5 t Machine completely overhauled in BEMA style with 12 months warranty Mechanically and visually as new Photo shows a recently completed machine with partially different options. Fanuc 21i control system - Grinding head UR 1-2-3 External/Internal/Face grinding - B-axis automatic, 1° Hirth gearing - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing system KEL-BALANCE - Left grinding wheel mount: 400 mm diameter - Right grinding wheel mount: 300 mm diameter - Internal grinding attachment with belt drive - Tailstock with micro adjustment - Fine adjustment upper slide Hsdpst Ii Nbefx Al Iol - Paper band filter SBP4 240 l

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Hedpfx Ast Ii Nuol Iol Center height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Swiveling workpiece headstock: 360° Swiveling grinding headstock: ±180° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Workpiece weight max.—mounted: 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight (approx.): 2.5 t Space requirement (approx.): 4.2 x 2.0 m As a global leader in the field of Kellenberger overhauling / retrofit, we are able not only to deliver machines in like-new quality with warranty, but also provide service for your equipment. Geometrically overhauled and newly painted, with original electrics. The photo shows a 600U that was recently delivered. - Digital display on 2 axes. Resolution of X-axis: 0.5 μm Options: - Encoder with digital display on workpiece spindle headstock - Encoder with digital display on grinding spindle headstock (no height adjustment possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase in center height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories available on request. At present, the machine tool does not comply with the fundamental safety and protection requirements as stipulated in BetrSichV 2015 (Industrial Safety Regulations 2015). The necessary minimum safety objectives must be determined by a risk assessment according to BetrSichV.

Kondisi: bekas, Tahun pembuatan: 1990, Penyetelan cepat dudukan spindle gerinda dengan bantalan udara Hodpfxoxbh Ebe Al Iol

Kondisi: bekas, Tahun pembuatan: 1986, schleifparameter-v1 Hodpfx Aloxyadmo Iol

Kondisi: bekas, Tahun pembuatan: 1992, tw6u-01 Hsdpfx Aloyt R R Ej Iel

Kondisi: bekas, Tahun pembuatan: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Longitudinal movement of the table: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (cantilevered): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Newly delivered to university. Taken over in 2018. Then fully serviced by BEMA and delivered to a single-person operator. The machine will now be serviced again and the table geometry reconditioned. 2-axis digital readout (Fagor) retrofitted. – Tailstock with fine adjustment – Internal grinding attachment – Coolant system Hodpfxoynmpgs Al Isl Accessories available on request.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1786, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 825 mm, jarak gerak sumbu Z: 1.100 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, produsen pengendali: Siemens, model controller: Sinumerik One, beban meja: 1.500 kg, diameter meja putar: 800 mm, kecepatan rotasi (min.): 25 rpm, kecepatan spindel (min.): 20 rpm, kecepatan spindel (maks.): 15.000 rpm, pasokan pendingin: 20 batang, jumlah spindel: 1, panjang alat: 460 mm, diameter alat: 200 mm, berat alat: 10.000 g, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, MATEC-30HV X = 3,000 mm Y = 825 mm Z = 1,100 mm / Horizontal Z = 975 mm / Vertical - 1-axis CNC swivel head Hjdpoxg Dhcefx Al Iol Swivel radius 300 mm, max. swivel angle +/- 105 degrees Absolute measuring system +/-3, selectable as either continuous or indexable with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Bellows with steel lamellae - Absolute measuring system for X, Y, Z axes - Chip conveyor - Rinsing pistol - Centralized oil lubrication - Workspace lighting - Control: Siemens Sinumerik ONE Modern CNC system for highly productive machine tools, comprising: NCU 1740 22" ITC2200 V3 display Machine control panel MCP 2200 - Electronic handwheel (portable) HT2 - Telephone diagnostics / remote maintenance - Motor spindle 15,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar Tank capacity of paper filter system: 900 l Filter capacity: 160 l/min - High-pressure coolant at external nozzles High-pressure coolant pump switchable via M function in the part program to the external nozzles on the spindle head. #20 bar# - Through-tool compressed air (IK compressed air) - Partition wall for double-station system - 3D measuring probe with wireless connection - RTS table probe for measuring, verification - UT-Tec collision monitoring - Automatic safety doors

Kondisi: bekas, Tahun pembuatan: 2012, x-travel 850 mm y-travel 700 mm z-travel 500 mm Control Siemens 840 D Rotary table 800 mm C-axis 0.001º (±360º) B-axis (table) º mm Spindle speed 18,000 rpm Tool holder HSK 63 Tool changer 38 positions/tools Internal coolant supply 80 bar Total power requirement 43 kVA Machine weight approx. 10.6 t Hermle C 40 U Machining Center 5-Axis KinematicOpt Adjustable control panel 2 machining tables Schunk zero-point clamping system Additional magazines 43 positions Blow-off device Compressed air through spindle center Chip flushing gun Spindle cooling Electrical thermal compensation Electric hand control module Renishaw probe BLUM tool breakage control Additional hydraulics for hydraulic workpiece clamping Hjdpfjyxy E Rex Al Ijl The technical data are manufacturer or operator specifications and are therefore non-binding for us. Intermediate sale reserved; exclusively our terms and conditions of business and sale apply. About us More than 400 own machines in stock Over 15,000 m² warehouse space, crane capacity 70 t More than 10,000 accessories for your workshop If you want to sell machines, production lines, or your business, please contact us. Further offers can be found on our website. Inspections are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Kondisi: bekas, Tahun pembuatan: 2011, Technical details: X-axis travel: 8,500 mm y-axis travel: 2,000 mm z-axis travel: 1,500 mm Rapid traverse x/y/z: 25 m/min Table size: 10,000 x 1,350 mm Table load capacity: max. 5 t/m² Universal milling head: orthogonal, 1° x 1° Hsdpfxeytrw Tj Al Ijl Tool holder: SK 50 Spindle speed range: 4,000 rpm Drive power: 37 kW Spindle torque: 900 Nm Internal coolant supply: 15 bar CNC control: HEIDENHAIN iTNC 530 Tool changer: 60 positions Total connected load: 75 kW Space requirements (LxWxH): approx. 12.7 x 5.2 x 4.6 m Machine weight: approx. 35 t Universal travelling column machining center, with orthogonal milling head, water-cooled, 1° indexing in 2 axes (360 positions in the rear and 270 positions in the front plane), 3D wireless probe M&H 20.41, partition wall for parallel operation/setup, internal air blast, internal coolant supply 15 bar, adapter for high-speed milling spindles with torque support, operator platform travels with machine, chip conveyor, electronic handwheel HR 410, monitored safety fences. Various accessories (angle milling heads, clamps, etc.) available as options. Approx. 39,000 power-on hours, approx. 16,000 spindle hours. Still under power and available for viewing at the current location.

Kondisi: bekas, Tahun pembuatan: 1977, tech-001 Hsdpfx Alovc Awfo Iel

Kondisi: bekas, Tahun pembuatan: 1983, Technical details: x-travel: 560 mm y-travel: 500 mm Hsdpfewgdz Ejx Al Iol z-travel: 450 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1974, schleifdurchmesser-max-265mm-schleiflaenge-500mm-beschreibung-fo lgt Hodpfx Aloytg U He Iel

Kondisi: sangat baik (bekas), panjang pemakanan sumbu X: 700 mm, panjang umpan sumbu Y: 350 mm, panjang umpan sumbu Z: 475 mm, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 350 mm, jarak gerak sumbu Z: 475 mm, kecepatan spindel (maks.): 1.500 rpm, kecepatan spindel (min.): 25 rpm, gores kuas bulu: 100 mm, panjang meja: 1.510 mm, lebar meja: 350 mm, Cincinnati 2MK Mesin Frais Horizontal dengan Kepala Vertikal Universal Model: 2MK Ukuran Meja: 1510 x 350 mm Perjalanan Longitudinal: 700 mm Hedoygk Drjpfx Al Isl Perjalanan Melintang: 350 mm Perjalanan Vertikal: 475 mm Taper Spindel: 50 INT Kecepatan Spindel: 25 – 1500 RPM Mesin dilengkapi dengan: Arbor Horizontal & Penyangga Arbor Kepala Swivel Ganda Sudut

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Frame dowel and slot mortising machine by Hofmann HT 200 U with angle adjustment Special drilling machine for staircase construction, window manufacturing, and universal applications thanks to pneumatic height adjustment. Hedpfxoyfta Te Al Isl Angled dowelling and baluster drilling can be easily performed using the rotatable drilling unit. Motor with pole switching, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor started via a practical handle switch Precision chuck with two inserts: 16mm and M10 thread Table size approx. 1100 x 240mm Line laser for precise positioning of the workpiece Drilling unit can swivel 65 degrees to the left and right Pneumatic adjustment of working height, dowelling on two levels without resetting Desired drilling heights for each level can be set with handwheel and digital counter, switching is then done pneumatically from the front Cross adjustment approx. 320mm, stepless or in 12mm increments Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, can be positioned at the front and rear of the table 2 swiveling workpiece supports 2 side stops, also usable as front supports Undercarriage Extraction port 80mm 4 used but good drill bits: 9, 12, 16, 19mm Some repainted areas, overall in very good condition, see original photos A used swiveling slot mortising machine in this condition is very rarely available. CE mark Operating manual Dimensions approx. 1200 x 1200 x 1200mm (LxWxH), weight 310kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse; see 'other offers from this supplier.'

Kondisi: bekas, Mesin Frais Alat Universal DECKEL Tipe FP 1 No. Mesin 51265 Tahun Pembuatan sekitar 1967 Perjalanan sumbu X: 300 mm Y: 150 mm Z: 340 mm Ukuran meja 600 x 200 mm Taper spindle SK 40 - S20 x 2 Kecepatan spindle 40-2000 rpm, 16 tingkat Daya motor 1,0 dan 1,6 kW, bisa pengalih kutub Hsdpfx Aleghtvao Iol Koneksi listrik 380 Volt, 50 Hz - Feeding pada sumbu X dan Z - Kecepatan spindle melalui 2 kecepatan motor dan 8 tingkat transmisi - Gerakan pinol pada kepala frais vertikal 60 mm - Meja sudut dapat diputar, diputar-putar, dan dimiringkan - Pompa pendingin di kaki mesin - Lemari kontrol terpisah Dimensi ruang yang dibutuhkan P x L x T 1100 x 1100 x 1600 mm Berat 690 kg dalam kondisi baik

Kondisi: baru, Tahun pembuatan: 2026, de-xweg1 Hedpfoyrtyajx Al Isl