Beli Universal Mesin Penggilingan bekas (77.684)

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter 250 mm Grinding length 400 mm Centre height 125 mm Control Fanuc 21i-T Machine serviced and partially overhauled. - New grinding spindle bearings - New X-axis spindle - Upper table re-ground - New table geometry - New geometry from workpiece headstock to grinding spindles B-axis with 1° Hirth serration Longitudinal positioning Cjdpfxevx Dvuo Ag Djrb HF internal grinding spindle GAP Paper band filter

Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter: 630 mm Grinding length: 600 mm Centre height: 320 mm Machine equipped with reinforced workpiece spindle head for unsupported grinding of heavy workpieces. Crjdpfxsv Dxxze Ag Deb The machine undergoes a major maintenance/partial overhaul including geometry inspection protocol in accordance with the Kellenberger new machine directive. At present, the machine does not comply with the essential health and safety requirements set out in BetrSichV 2015. An adjustment to the required minimum safety level must be determined by means of a risk assessment as per BetrSichV.

Kondisi: bekas, Grinding diameter: 350, 450 mm Grinding length: 600 mm Centre height: 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Credpfx Agod Ih D Ej Deb Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding spindle head swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed (per stroke): 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±10° Table longitudinal movement: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – flying: 130 kg incl. clamping Internal spindle mount: 70 mm Total connected load: 6.5 kW Machine weight approx.: 2.2 t Floor space required approx.: 3.1 x 2.0 m As a world leader in Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new condition with warranty, but can also provide service for your machines, fully overhauled to metric standards and newly painted. Photo shows a previously delivered machine, possibly with different options. The machine is equipped as standard with central lubrication and roller guideways in the X-axis flat bed, as well as air lift-off in the grinding spindle stock. BEMA standard features include: - 2-axis digital readout. X-axis resolution: 0.5 μm - Grinding spindle speed display - Stepless speed control for the grinding spindle, 70–100% - Stepless speed control for the internal grinding spindle, 70–100% - Workpiece spindle drive by three-phase motor, continuously variable via frequency converter Optional features (at extra cost): - Encoder with digital display in the workpiece headstock - Encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - Sine bar - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height up to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Of course, our fully overhauled machines come with a 12-month warranty (valid only for neighboring countries). Further accessories available on request. At present, this machine tool does not comply with the fundamental safety and protection requirements as specified in BetrSichV 2015. The necessary minimum safety level must be determined by a risk assessment pursuant to BetrSichV.

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Cjdpfjv I Eq Sox Ag Dorb Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (overhung): 130 including clamping unit kg Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space required approx.: 4.2 x 2.0 m Immediately available, naturally with a 12-month warranty! Geometrically overhauled and repainted with new electrics. In KELLENBERGER quality!!! - Digital display on 2 axes. Resolution on the X-axis: 0.5µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Additional accessories available on request The machine tool does not currently meet the basic safety and protection requirements as specified in BetrSichV 2015. An increase to the required minimum safety objective must be determined via a risk assessment according to BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2010, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Control: Fanuc 310is Completely mechanically overhauled. Including grinding process and setup for one workpiece. Original photo of the machine from EMO 2010. CNC control: GE Fanuc 310is Hand panel for CNC control GE Fanuc With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel assembly left: 500 x 80 mm Grinding wheel assembly right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing device on the upper table Swivelling holder for PCBN diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing devices KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece spindle for internal and external grinding Provisions for measurement controls Movomatic ESZ 400 or Marposs P7 ME Preparation for external filter Coolant shut-off for table units Fully enclosed for emulsion Mist extraction unit for emulsion Maintenance unit for pneumatic auxiliary functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: Measuring probe C25 Hydraulic preparation for arbour steady rest Csdpevdk N Eefx Ag Djrb

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Space requirement approx. 3.6/3.5 m Photos show an identical machine with 225 mm centre height Base Model: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - B-axis infinitely variable, high resolution - Marposs measurement system for tool setting - Active longitudinal positioning - GAP control at T1 and T2 from ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt-driven Options at Additional Cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (lead time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic leadscrew in X - New hydrostatic system with only one pump and accumulator for better energy efficiency - Monitoring of water content in the hydrostatic system - Extraction unit Other options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New state-of-the-art CNC cylindrical grinder control system with BEMA cylindrical grinding interface - Rebuilt control cabinet - New drive technology - Replacement of all electrical wiring, Berus pressure switch, etc. - New absolute glass scales in X and Z Cedpfx Asuxfucog Derb - New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a basic license and various options depending on the machine’s equipment. Basic software - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zeroing - Grinding wheel zeroing - Measurement of dressing diamonds - Two form diamonds - One form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - Three flat dressers - Corrections - Z-position measurement (probe required) - GAP touch detection (touch dressing device required) OPTIONS at additional cost: Software for profile plunge grinding: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single and multi-start external and internal thread grinding with threads dressed on the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Non-circular grinding software: Non-circular grinding requires the workpiece axis to be equipped with a high-resolution rotary encoder to operate the axis as a C-axis. The non-circular...

Kondisi: bekas, Tahun pembuatan: 1995, schleifmaschine-parameter-2024 Cedpfxjyatx Se Ag Derb

Kondisi: bekas, Tahun pembuatan: 2006, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Machine weight approx. 3.5 t Machine completely overhauled in BEMA style with 12 months warranty Mechanically and visually as new Crjdot Ii Nbopfx Ag Deb Photo shows a recently completed machine with partially different options. Fanuc 21i control system - Grinding head UR 1-2-3 External/Internal/Face grinding - B-axis automatic, 1° Hirth gearing - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing system KEL-BALANCE - Left grinding wheel mount: 400 mm diameter - Right grinding wheel mount: 300 mm diameter - Internal grinding attachment with belt drive - Tailstock with micro adjustment - Fine adjustment upper slide - Paper band filter SBP4 240 l

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Credpfx Agjt Ii Nuj Deb Center height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Swiveling workpiece headstock: 360° Swiveling grinding headstock: ±180° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Workpiece weight max.—mounted: 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight (approx.): 2.5 t Space requirement (approx.): 4.2 x 2.0 m As a global leader in the field of Kellenberger overhauling / retrofit, we are able not only to deliver machines in like-new quality with warranty, but also provide service for your equipment. Geometrically overhauled and newly painted, with original electrics. The photo shows a 600U that was recently delivered. - Digital display on 2 axes. Resolution of X-axis: 0.5 μm Options: - Encoder with digital display on workpiece spindle headstock - Encoder with digital display on grinding spindle headstock (no height adjustment possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase in center height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories available on request. At present, the machine tool does not comply with the fundamental safety and protection requirements as stipulated in BetrSichV 2015 (Industrial Safety Regulations 2015). The necessary minimum safety objectives must be determined by a risk assessment according to BetrSichV.

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MT5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivelling 360° Grinding headstock swivelling 180° ± Grinding spindle speeds 1500, 1700, 2200 rpm Plunge feed: incremental 0–9.99 mm/Ø Plunge feed: continuous 0–9.99 mm/Ø Table swivelling ±8° Longitudinal table travel 1100 mm Table speed 0.02–6 m/min Workpiece weight between centres 130 kg Cross travel max. 270 mm Workpiece weight max. (flying) 130 kg incl. clamping Internal spindle mounting 80 mm Tailstock quill mounting MT3 Quill travel 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo shows a previously delivered machine. -The touch panel operation is extremely user-friendly. -The icons on the control panel are virtually identical to the original control, so no retraining is required. -Diagnostic function with display of PLC messages and digital I/Os. -Dressing function can be extended or modified to customer requirements. -Workpiece spindle oriented stop available on request. -New maximum infeed amount: 40 mm, extendable upon request. -Digital display on 2 axes. X-axis resolution 0.5 µm. Options: -Encoder with digital display on the workpiece headstock -Encoder with digital display on the grinding headstock (no height adjustment with spindle possible) -New stable internal grinding attachment diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for grinding spindle Credpouxfupefx Ag Djb Includes: -Operating tools -Clamping tube for chuck Further accessories available upon request. The machine is equipped with an electronically controlled feed system in the X-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face and internal grinding in a single setup of individual parts. Available options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measuring control At the present time, the machine tool does not comply with the essential safety and protection requirements as specified in the BetrSichV 2015. The required minimum safety objectives must be determined by a risk assessment in accordance with the BetrSichV.

Kondisi: bekas, Tahun pembuatan: 1990, Penyetelan cepat dudukan spindle gerinda dengan bantalan udara Csdexbh Ebjpfx Ag Dorb

Kondisi: bekas, Tahun pembuatan: 1986, schleifparameter-v1 Csdpfxsxyadmo Ag Dsrb

Kondisi: bekas, Tahun pembuatan: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Longitudinal movement of the table: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (cantilevered): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Newly delivered to university. Taken over in 2018. Then fully serviced by BEMA and delivered to a single-person operator. The machine will now be serviced again and the table geometry reconditioned. 2-axis digital readout (Fagor) retrofitted. – Tailstock with fine adjustment – Internal grinding attachment – Coolant system Codeynmpgepfx Ag Dsrb Accessories available on request.

Kondisi: baru, Tahun pembuatan: 2026, de-xweg1 Cjdeyrtyaopfx Ag Djrb

Kondisi: baik (bekas), Tahun pembuatan: 1990, 1 used, well-maintained CNC-controlled tool milling machine in travelling column design, equipped with GRUNDIG Dialog 11 CNC path control Table size: 1600 x 675 mm Tool holder: SK / ISO 40 Travel paths: X-axis, longitudinal 1200 mm Y-axis, transverse 600 mm Z-axis, vertical 500 mm Table load capacity: 2000 kg Spindle speed range: 20 – 6300 rpm Feed range, stepless: 2 – 10,000 mm/min Rapid traverse (all axes): 10 m/min Quill stroke: 80 mm Drive power 100% duty cycle: 7.5 kW 40% duty cycle: 12 kW Machine dimensions (L x W x H): 3600 x 3000 x 2300 mm Machine weight: 6800 kg Control cabinet dimensions: 1700 x 900 x 1750 mm Control cabinet weight: 470 kg Accessories / Special Features: • CNC tool milling machine suitable for tool and jig construction, training, and mould-making applications • CNC path control GRUNDIG Dialog 11 • Screen graphics, dialog-guided input, 3D linear interpolation, circular interpolation, helical interpolation, polar coordinate input, numerous drilling and milling cycles, cycle input supported by graphics, “contour pocket” milling cycle for automatic rough-milling of irregular pockets, including those with islands, coordinate system offset and rotation • Electronic handwheel • RS 232 interface • Swiveling vertical milling head +/- 90° • Hydraulic tool clamping, DIN 2080 with clamping groove, Ott system • Quill adjustment 80 mm • Horizontal milling device • Fully enclosed safety cabin • Ball screw spindles in all 3 axes • Coolant system Crodpfx Agehhuf Hs Djb • Machine lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Kondisi: bekas, Tahun pembuatan: 1995, Technical details: X-axis travel: 600 mm Y-axis travel: 500 mm Z-axis travel: 450 mm Machine weight approx.: 3.5 t Csdpjw D Hhpofx Ag Derb

Kondisi: bekas, dehu Crodpfxow Rktbo Ag Djb

Kondisi: baru, WM6350F ROGI mesin frais universal 400V-3F Kapasitas bor baja ----- 50 mm Kapasitas frais baja ----- 25 mm Kapasitas frais mantel ----- 100 mm Motor horizontal ----- 2,2 kW Motor vertikal ----- 2,2 kW Rentang kecepatan spindle frais horizontal ----- 60 ~ 1350 rpm Rentang kecepatan spindle frais vertikal ----- 90 ~ 2000 rpm Taper spindle ----- ISO 40 Meja ----- 1270 x 320 mm Berat ----- 1500 kg INCLUDE * Pembacaan digital 3 sumbu merek SINO * Feed otomatis meja kerja X,Y,Z * Feed otomatis spindle * Lampu LED * Sistem pendingin * Panel kontrol mewah * Kepala frais dapat dimiringkan kiri/kanan 0 - 45 derajat * Meja kerja dapat diputar OPSIONAL * Batang penarik pneumatik Credpfx Agega T Are Deb

Kondisi: bekas, Tahun pembuatan: 1993, #de-to-specs Csdpfxoyn R E Es Ag Derb

Kondisi: baru, Travel x-axis: 1000 mm y-axis: 360 mm z-axis: 400 mm Spindle taper: ISO 40 ISO Table: 1370 x 300 mm Feed rate: 30–830 / 23–625 mm/min Spindle speed: 45–1660 rpm Distance spindle/table: 60–460 mm Rapid traverse Z axis: 750 mm/min Overhang: 95–575 mm Total power requirement: 3.0 kW Machine weight approx. 1505 kg Dimensions (L x W x H): 1740 x 1860 x 1900 mm The universal milling machine UWF 110 Servo is suitable for performing light and medium milling operations. Thanks to its high versatility and ease of conversion, it can be successfully used in workshops for processing small and medium-size series. Special features of this machine include the swiveling worktable, the flat guides in the y and z axes, and the servo-driven feeds and rapid traverse on all axes. - Large-dimension rectangular guideways on the y and z axes ensure increased stability - 8x automatic feeds and rapid traverse on all axes Cjdpfx Aexaak Tsg Dorb - Driven by a servomotor - Universal milling head, Huron system, adjustable to any angular position - Swiveling control panel with ergonomically positioned switches - Heavy machine base made of cast iron for vibration-free operation - Smooth running thanks to ground, oil-bath-lubricated gear wheels - Overarm with clearly arranged gear transmission for spindle speed - Digital position display for x, y, and z axes included - Precisely machined cross table with T-slots Scope of delivery: - 3-axis digital readout ES-12 H with LCD display - Drawbar M16 - LED machine lamp - Feed for x, y, and z axes - Coolant system - Counter bearing - Long milling arbor ISO 40 / 27 mm - Combined side-milling arbor ISO 40 / 27 mm - Coolant tray - Adjustable safety guard - Central lubrication for x, y, and z axes - Operating tools

Kondisi: bekas, Tahun pembuatan: 2004, de23t01 Codpfx Asywntyog Derb

Kondisi: baik (bekas), Tahun pembuatan: 2001, Heidenhain TNC 310 CNC control Electronic handwheel Coolant system Technical data: Codpfxjit Tr Te Ag Dsrb Longitudinal travel (X-axis): 600 mm Cross travel (Y-axis): 400 mm Vertical travel (Z-axis): 400 mm Spindle taper: SK 40 Spindle speed range: 60–5,000 rpm Feed rate: 0–2,000 mm/min Rapid traverse x/y: 5 m/min Rapid traverse z: 4 m/min Total drive capacity: 7 kW Weight approx.: 2,000 kg Technical data, accessories and machine description are not binding.

Kondisi: baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 10.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 3.000 mm, - CNC control Heidenhain TNC 415B - Programmable 2-axis NC milling head, 2.5° - Coolant system The machine is sold without the platen table Accessories: Approx. 20 tool holders DIN 2080 with drawbars DIN 69872 Various spare parts such as bevel gears for the milling head and a ball screw for the X-axis. Technical data: X-axis travel (longitudinal): 10,000 mm Y-axis travel (cross): 1,500 mm Z-axis travel (vertical): 3,000 mm Spindle taper: SK50 Spindle speed range (2-step): 35–3,000 rpm Feed rate: 6–10,000 mm/min Rapid traverse X, Y, Z: 10, 15, 10 m/min Crjdpfx Agowrzkzj Dsb Main drive power (100% duty cycle): 37 kW Machine weight approx.: 39,300 kg Technical data, accessories, and machine description are not binding.

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 450 mm, panjang umpan sumbu Y: 300 mm, panjang umpan sumbu Z: 350 mm, Layar digital 3-sumbu Spindel frais horisontal dan vertikal Pinol Credpfx Aewyit Hsg Dsb Data teknis: Pergerakan memanjang X: 450 mm Pergerakan melintang Y: 300 mm Pergerakan vertikal Z: 350 mm Ukuran meja: 800x400 mm Taper spindel: SK40 Kisaran putaran: 50-2500 rpm Kisaran feeding: 8-400 mm/menit Daya motor: 3,2 kW Berat mesin: 1500 kg Data teknis, aksesori, dan deskripsi mesin tidak mengikat.

Kondisi: bekas, Tahun pembuatan: 1979, x800_y300_z400 Crodpfx Ajwwwqheg Dob