Beli Weeke Optimat Bhc 550 bekas (77)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, nomor mesin/kendaraan: 0 - 250 - 04 - 0558, Spesifikasi teknis: Area kerja X 2.500 mm Area kerja Y 800 mm Area kerja Z 40 mm Jumlah spindel frais 2 Spindel pengeboran vertikal 16 Spindel pengeboran pada sumbu X 2 Spindel pengeboran pada sumbu Y 1 Pompa vakum Meja mesin: meja lintang Fgsdpfx Agerwmwfodoi Berat sekitar 3.500 kg Pusat pengeboran dan frais CNC WEEKE BP 10, dibuat pada tahun 1991. Luas panel 5.200 x 1.500 mm. Area pemesinan 2.500 x 800 mm, 16 stasiun pengeboran vertikal, 1 gergaji alur, 2 unit frais, roda manual untuk pelat penopang, dan unit hidrolik. Pada tahun 2016, sistem diubah menjadi Linux CNC 3D – komputer baru, monitor baru, dan perangkat lunak baru.

Kondisi: bekas, nomor mesin/kendaraan: 006279, Area kerja sumbu X: 3100 mm Area kerja sumbu Y: 1250 mm Fsdpfx Agjz S T T Rodogi Permukaan kerja: Meja penataan Jumlah sumbu yang dikontrol: 3 sumbu Jumlah spindel pengeboran: 11 Jumlah posisi alat: 8

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, CNC flexible gantry machine Horizontal throughfeed panel Control: Power Control Open powerTouch, software: WoodWOP (TAPIO-ready) Infeed table (panel support) + outfeed table (panel support) Panel feed by 3 conveyor belts Min. workpiece dimensions (X-Y-Z) mm: 250 x 100 x 12 Max. workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Special side guide system for workpieces with 'sensitive' edges 3 upper vertical pressure devices Powered conveyor belt for waste removal Integrated electrical and control cabinet Total installed power (kW): approx. 47 OPTIONAL: WIRELESS BARCODE SCANNER Fgjdpfx Agsx Aqi Ejdsi 2 WORKING UNITS (TOP): (SERVO MOTOR for X-Y-Z axes): 4 drilling supports V15 (4 x 2.3 kW), each with 15 vertical spindles (total: 60 upper spindles) 3 WORKING UNITS (BOTTOM): (SERVO MOTOR for X-Y-Z axes): 6 drilling supports V32 (6 x 2.3 kW), each with 32 vertical spindles (total: 192 lower spindles) 2 WORKING UNITS (HORIZONTAL): 2 drilling supports H21 (2 x 2.3 kW) with horizontal spindles 21 horizontal drilling spindles (right) + 21 horizontal drilling spindles (left)

Kondisi: bekas, nomor mesin/kendaraan: 005910, Area kerja sumbu X: 2500 mm Area kerja sumbu Y: 1300 mm Fgsdpjwuckhofx Agdoi Daya spindle utama: 6 kW Jumlah sumbu yang dikontrol: 3 sumbu Jumlah spindle bor: 84

Kondisi: bekas, nomor mesin/kendaraan: 006158, Lebar panel maksimum: 1000 mm Panjang panel maksimum: 2500 mm Fodpfxoiwptue Agdsgi Jumlah injektor: 14

Kondisi: sangat baik (bekas), COMPLETE 4-SIDE FORMAT PROCESSING AND EDGE-BANDING LINE, max. working width 2500 mm, equipped with automatic feeding and stacking system, consisting of the following machines: X04004A) Feeding gantry (with 2 loading stations) "BARGSTEDT" TBH 500/D/30/14 X04004B) Rotating device (90° LONGITUDINAL-TRANSVERSE) "HOMAG" Model TDR31/25/12 X04004C) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for final cut) X04004D) Separation station "BARGSTEDT" X04004E) Double-sided sizing and edge-banding machine "HOMAG" Model KFR 620/19/QA/25 X04004F) 1st Drilling machine "WEEKE" Model BST 500 D X04004G) 2nd Drilling machine "WEEKE" Model BST 500 D X04004H) Rotating device (90° TRANSVERSE-LONGITUDINAL) "HOMAG" Model TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 Fodpjlikvhsfx Agdegi X04004L) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for final cut) X04004M) Stacking gantry (with 2 unloading stations) "BARGSTEDT" Model TSP 420/40/30/12 BA

Kondisi: sangat baik (bekas), 3-axis (X-Y-Z) CNC-controlled "FLEXIBLE" MACHINING CENTER Moving table (workpiece), static working head - Horizontal table (workpiece) PowerControl PC86 powerTouch control unit (woodWOP software) Fgjdpfsyyvttex Agdoi Safety enclosure for working head No. 2 workpiece clamps for access to the working area WEEKE pre-positioning unit - for faster workpiece positioning in the machine with clamps. Infeed table (workpiece support) to entry point - outfeed table (with powered conveyor belt) With automatic panel pusher Min. workpiece dimensions (X-Y-Z) mm 200 x 70 x 8 (2 x 4 mm) Max. workpiece dimensions (X-Y-Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) No. 2 workpieces can be processed simultaneously (in Z-axis) Separate control cabinet and operator console WORKING UNITS (TOP): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW No. 42 independent vertical drilling spindles (drilling head power kW 2.3) No. 10 independent horizontal drilling spindles (8 in X + 2 in Y) No. 1 grooving saw unit (swivels 90° in X-Y direction) Diameter (mm) 125 No. 1 vertical main spindle (milling unit) ETP (main vertical spindle power (kW 6)) WORKING UNITS (BOTTOM): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW No. 42 independent vertical drilling spindles (drilling head power kW 2.3) No. 10 independent horizontal drilling spindles (8 in X + 2 in Y) No. 1 grooving saw unit (swivels 90° in X-Y direction) Diameter (mm) 125 No. 1 vertical main spindle (milling unit) ETP (main vertical spindle power (kW 6))

Kondisi: bekas, nomor mesin/kendaraan: 006157, Max. panel width: 1000 mm Max. panel length: 2500 mm Number of units: 5 Number of units: 1 Positioning via NC control: yes Lateral horizontal groups: yes Fgsdpey Nkyasfx Agdoi

Kondisi: sangat baik (bekas), Kontrol PC Power Control PC85T Software WoodWOP + TOPDRILL No. 2 Konveyor bermotor tipe thru-feed No. 2 Dudukan bor horizontal (tampilan digital untuk data posisi sumbu) No. 1 Unit bor untuk setiap dudukan bor horizontal (1 x 1,5 kW) No. 21 Spindel untuk setiap unit bor horizontal Lebar kerja maks. (mm): 2500 Lebar kerja min. (mm): 250 No. 4 Dudukan bor vertikal bawah (tampilan digital untuk data posisi sumbu) No. 2 Unit bor untuk setiap dudukan bor vertikal bawah (2 x 1,5 kW) Fodpezrd Sfofx Agdegi No. 4 Penjepit benda kerja vertikal atas Sabuk pembuang serbuk Daya total terpasang (kW): 35

Kondisi: bekas, nomor mesin/kendaraan: 007601, Working area X-axis: 4320 mm Working area Y-axis: 2245 mm Working table: Nesting table Main spindle power: 9 kW Number of controlled axes: 3 axes Number of drilling spindles: 16 Fjdpfx Ageu N Skfjdsgi Number of tool positions: 8

Kondisi: bekas, Tahun pembuatan: 1998, WEEKE BP 150/K Fgedpfxozvbhro Agdji Produsen: WEEKE Tipe: BP 150/K Tahun Pembuatan: 1998 Tipe Mesin: Pusat Pemesinan CNC / Sistem Point-to-Point Mesin dengan Lengan Ekstensi Area Kerja X: sekitar 3.645 mm* Area Kerja Y: sekitar 1.250 mm* Area Kerja Z: sekitar 250 mm* 1 Spindel Utama, daya 10 kW Kecepatan Spindel Utama maks. 24.000 RPM Pemasangan Alat: HSK-F63 Pengubah Alat: 8 posisi Sumbu ke-4 30 Spindel Bor Vertikal 6 Spindel Bor Horizontal Sistem Meja: Meja Konsol Jumlah Konsol: 8 Pompa Vakum Perangkat Keselamatan Pengendali: HOMAG HOMATIC 2000 / HOMATIC 2000 IPC* Perangkat Lunak: HOMAG woodWOP 4.5 Sumbu ke-4: Sumbu C / Sumbu Tambahan yang Dikendalikan NC*

Kondisi: bekas, nomor mesin/kendaraan: 006228, X-axis working range: 3700 mm Y-axis working range: 1550 mm Fjdey Nkwrepfx Agdogi Working table: nesting table Main spindle power: 9 kW Number of controlled axes: 3 axes Number of drilling spindles: 7 Number of tool positions: 8

Kondisi: bekas, nomor mesin/kendaraan: 008166, chq1ahua Fgedpfx Ajyy U S Ijgdoi

Kondisi: bekas, nomor mesin/kendaraan: 005289, Area kerja Sumbu X: 7400 mm Area kerja Sumbu Y: 1550 mm Meja kerja: Meja nesting Fjdpfx Agowcyacodegi Daya spindle utama: 11 kW Jumlah sumbu terkontrol: 4 sumbu Jumlah spindle bor: 10 Jumlah tempat alat: 14

Kondisi: sangat baik (bekas), Kontrol PC Power Control PC85T Software WoodWOP + TOPDRILL No. 2 Konveyor bermotor tipe thru-feed No. 2 Dudukan bor horizontal (tampilan digital untuk data posisi sumbu) No. 1 Unit bor untuk setiap dudukan bor horizontal (1 x 1,5 kW) No. 21 Spindel untuk setiap unit bor horizontal Lebar kerja maks. (mm): 2500 Lebar kerja min. (mm): 250 No. 4 Dudukan bor vertikal bawah (tampilan digital untuk data posisi sumbu) No. 2 Unit bor untuk setiap dudukan bor vertikal bawah (2 x 1,5 kW) No. 4 Penjepit benda kerja vertikal atas Sabuk pembuang serbuk Daya total terpasang (kW): 35 Fodeyv Ev Aspfx Agdegi

Kondisi: bekas, nomor mesin/kendaraan: 007400, Lebar panel maks.: 800 mm Panjang panel maks.: 1250 mm Jumlah injektor: 1 Fodpot Hmt Iefx Agdogi Posisi melalui kontrol NC: ya Kelompok horizontal samping: ya

Kondisi: bekas, nomor mesin/kendaraan: 005796, Area kerja sumbu X: 3700 mm Area kerja sumbu Y: 1550 mm Daya spindle utama: 9 KW Jumlah sumbu terkontrol: 3 sumbu Jumlah spindle bor: 10 Fjdpfehwi U Tex Agdogi Jumlah slot alat: 8

Kondisi: bekas, nomor mesin/kendaraan: 008170, a1 Fgedex A Tcuepfx Agdei

Kondisi: sangat baik (bekas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety enclosure for the working head. Full machine safety housing Infeed table (workpiece support) at the entry side. Outfeed table (with conveyor belts) Workpiece feed by no. 3 conveyor belts (feed speed max. approx. 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Installed total power (kW): 99 No. 2 WORKING UNITS (TOP): - (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM): - (SERVO MOTOR X-Y-Z): Fedpfjgwbbqsx Agdegi No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue supply and dowel insertion (right side) No. 8 injection nozzles for glue supply and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Kondisi: sangat baik (bekas), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in-line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Feed belts (number): 2 (adjustable feed speed) Horizontal drilling supports (number): 2 Drilling units per horizontal support (number): 2 Spindles per horizontal drilling unit (number): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (number): 6 Drilling units per lower vertical support (number): 2 Spindles per drilling unit on lower support (number): various Upper vertical drilling supports (number): 2 Fgsdpfx Aeh Ryhnegdei Spindles per drilling unit on upper support (number): 2 Upper vertical workpiece clamps (number): 6 Chip extraction conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.700 mm, jarak lintasan sumbu Y: 1.550 mm, kecepatan pemakanan sumbu X: 96 m/menit, laju pemakanan gandar Y: 96 m/menit, kecepatan rotasi (maks.): 24.000 rpm, 1 Fgsdpfxjxw Up So Agdji

Kondisi: belum diuji (bekas), Tahun pembuatan: 1976, nomor mesin/kendaraan: 1299, Marke: Weeke Modell: PE 75 Baujahr: 1976 Fedpfx Agju Nwzcsdegi Motor: 7,5 kW, 50 Hz, 380 V, 3-phasig Lagernummer: 10316

Kondisi: bekas, Tahun pembuatan: 2004, jumlah sumbu: 4, model controller: POWERCONTROL PC85, lebar kerja: 1.220 mm, kecepatan spindle milling (maks.): 24.000 rpm, panjang kerja: 3.250 mm, RINCIAN TEKNIS Area kerja sumbu X: 3.250 mm Area kerja sumbu Y: 1.220 mm Jumlah area kerja: 2 Sistem meja: Meja tipe Pod-and-Rail Jumlah penyangga penghisap vakum: 6 Jumlah sumbu yang dikendalikan: 4 Jumlah unit pengeboran: 1 Jumlah spindel frais: 1 Jumlah unit alur: 1 Unit pengeboran Posisi: atas Spindel pengeboran vertikal: 12 Spindel pengeboran horizontal pada arah X: 4 Spindel pengeboran horizontal pada arah Y: 2 Jumlah total spindel pengeboran: 18 Spindel frais Posisi: atas Sumbu yang dikendalikan: 4 Daya motor: 12 kW Kecepatan putar: 24.000 RPM Pendinginan: Pendinginan cairan Penggantian alat: otomatis Unit alur Posisi: atas Desain: tetap, untuk pembuatan alur pada arah X Diameter alat maksimum: 100 mm Daya motor: 2,2 kW Fgsdpfx Aezmtl Rjgdei Kecepatan putar: 7.500 RPM Jumlah posisi penggantian alat: 16 Majalah alat pada kepala pemrosesan: 8 posisi Majalah alat di bagian belakang mesin: 8 posisi RINCIAN MESIN Pengontrol: POWERCONTROL PC85 Perangkat lunak pemrograman: WOODWOP 5 Daya spindel utama: 12 kW Daya total: 22 kW Daya pompa vakum: 100 m³/jam PERLENGKAPAN Tanda CE Meja kerja tipe Pod-and-Rail 6 penyangga penghisap vakum Pompa vakum Penggantian alat otomatis 2 majalah alat, masing-masing dengan 8 posisi Perangkat perlindungan untuk unit pemrosesan dengan sensor keamanan Matras keselamatan depan Pendinginan cairan spindel frais Mesin dijual dan dikirim dalam kondisi sebenarnya dan secara hukum (“seperti yang terlihat dan disetujui”), berdasarkan dokumentasi foto dan dokumen teknis/komersial dengan karakter deskriptif. Pembeli berhak untuk memeriksa barang sebelum pengambilan, dan bertanggung jawab atas pemasangan, pengamanan, dan penggunaan mesin di lokasi tujuan. Referensi eksternal: 7716

Kondisi: sangat baik (bekas), CNC flexible automatic through-feed drilling machine (gantry machine) with dowel insertion system Moving panel (workpiece), moving working head (horizontal panel-workpiece) Control: PowerControl, Software: WoodWOP Integrated machine safety enclosure Fgedpfxsd Nvi Dj Agdji Workpiece drive via 3 conveyor belts Feed speed (m/min): approx. 1 - 90 Minimum workpiece dimensions (X-Y-Z) in mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) in mm: 3000 x 1400 x 60 Maximum axis travel (X - Y - Z) in mm: 3580 x 1838 x 125 Simultaneous machining of two workpieces possible (in Y-axis): 600 mm + 600 mm Total connected load (kW): 38 WORKING UNITS (TOP): Drilling unit with vertical spindles (qty.): 1 Independent vertical drilling spindles (qty.): 38 + 3 special Independent horizontal drilling spindles (qty.): 6 Grooving saw unit (for machining in X-axis), blade diameter (mm): 100 Vertical main spindle (milling unit), qty.: 1 x SK 30 (vertical main spindle power: 6 kW) Automatic tool change system, disc tool changer, qty.: 3 tool positions WORKING UNITS (HORIZONTAL): Drilling units with horizontal spindles (qty.): 2 Horizontal drilling spindles – right side (qty.): 13 + left side (qty.): 13 Injection nozzles for glue application and dowel insertion (right side): 2 + (left side): 2 Dowel magazine for automatic dowel insertion (qty.): 1

Kondisi: belum diuji (bekas), Tahun pembuatan: 2006, Fungsionalitas: belum diuji, kecepatan rotasi (maks.): 2.970 rpm, panjang benda kerja (maks.): 2.500 mm, lebar benda kerja (maks.): 1.000 mm, Perlengkapan: Penandaan CE, TECHNICAL DETAILS Maximum panel width: 1,000 mm Maximum panel length: 2,500 mm Minimum panel length: 250 mm Minimum panel width: 100 mm Number of vertical lower units: 5 Number of vertical upper units: 1 Lateral horizontal units: yes Number of pressing elements: 5 Number of lateral horizontal units: 2 Motor power: 1.5 kW Speed: 2,970 rpm MACHINE DETAILS Control system: TOPDRILL Machine programming software: WOODWOP Total installed power: 35 kW EQUIPMENT Lateral horizontal units CNC positioning of the units CNC positioning of the Z-axis Safety standards with CE marking Safety light barriers Automatic chip extraction Fedsyzy T Topfx Agdogi The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the designated location. External reference: 6157