Beli Weiler Dz 42 bekas (203)

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor 81, lead and feed screw lathe with 3-axis digital readout from K&C, NEW Geometrically overhauled with acceptance protocol covering new machine tolerances Technical Data: >> Machine No. 84-121 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027 size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Features: >> 3-axis digital readout by K&C, new, 12 months manufacturer warranty, with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter mode, quick zeroing, direction reversal >> Collet chuck new, collets new from 3 to 26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix size B, new, with 3 toolholders Hnodowrm Dtjpfx Adqju >> Bed stop >> Electrical chuck guard, new >> Rear chip guard >> Operators manual >> Coolant system >> Machine levelling pads About the Machine: Offered is a Weiler Condor 81 lead and feed screw lathe in excellent, geometrically overhauled condition. The bedways have been reground and/or hand-scraped as new. Delivery with inspection protocol. Accessories such as collets and chuck are new. Safety features: The machine is equipped with a braking motor, electronic spindle guard, and two emergency stop switches – making it an as-new condition lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like finish surfaces to be produced. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Turning diameter 330 mm Turning length 750 mm Control WEILER D 1 Center height 165 mm Distance between centers 750 mm Max. swing diameter over cross slide 160 mm Spindle bore 42 mm Spindle speeds 1 - 4500 rpm Spindle nose DIN 55027 size 5 Cross slide travel 180 mm Feeds X-axis mm/rev Feeds Z-axis mm/rev Hnsdpfx Ajwi Ugqedqju Rapid traverse X-axis 5 m/min Rapid traverse Z-axis 10 m/min Feed force X/Z-axis 3000 / 6000 N Tailstock quill taper MK 3 Tailstock quill diameter 50 mm Tailstock quill stroke 110 mm Total power requirement 10 kW Machine weight approx. 1.3 t Machine dimensions L x W x H 1.8 x 1.2 x 1.7 m Accessories: 3-jaw chuck SCHUNK 0 mmø, quick-change toolpost head, coolant system

Kondisi: bekas, Tahun pembuatan: 1982, Swing diameter over bed: 297 mm Swing diameter over cross slide: 160 mm Turning length: 500 mm Hsdpfxovxwlpo Adqonu Distance between centers: 500 mm Spindle speed: 15 - 3550 rpm Spindle nose: Size 5 (DIN 55022) Spindle bore: 36 mm Tailstock quill taper: MK 3 Tailstock quill stroke: 90 mm Tailstock offset: 500 mm Motor speed: 1440 / 2830 rpm Motor power: 3 / 2.2 kW Weight: 0.8 t Required floor space approx. 1.40 x 0.70 x 1.20 m Chuck guard with electric interlock Tool cabinet with various contents

Kondisi: bekas, Tahun pembuatan: 1980, Weiler Condor VS2 lathe with 3-axis Heidenhain digital readout, year of manufacture 1980, 4-jaw chuck, Multifix quick-change toolpost with 3 holders. The machine is in very good, ready-to-use condition and comes from a training workshop. Can be demonstrated under power by appointment. Hnodpfxjvx Sw Hs Adqsu

Kondisi: baik (bekas), Perfekte Hochleistungsmaschine für Döner-, Burger- oder Tierfutterfabriken. Hjdpfx Adewlfxveqjnu

Kondisi: bekas, translated-tech-specs-001 Hjdpfxewrahxe Adqenu

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C - NEW Hsdpfx Adevambceqonu Geometrically overhauled with acceptance protocol for new machine tolerances! Technical Data: >> Machine No. 90-1495 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter selection, quick zeroing, counting direction selection >> Collet chuck system, new collets from 3 to 26 mm in 1 mm steps >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix quick-change toolpost, new, size A, with 2 new tool holders >> Bed stop >> Electric chuck guard, new >> Machine lamp, LED, new >> Rear splash guard >> Operating manual >> Coolant device >> Machine levelling feet About the Machine: For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, absolutely as-new condition. The guideways have been newly ground and hand-scraped. Acceptance as per inspection protocol. A very fine machine with electronic spindle guard. The accessories—collets, chuck, Multifix—are new. Spindles, nuts, bearings, belts, and wipers have been renewed. Take the opportunity to view this machine under power on site and see the condition for yourself.

Kondisi: bekas, Swing diameter over bed / mm Hnjdpfx Aswgi Tmedqju Swing diameter over cross slide / mm Turning length / mm

Kondisi: baik (bekas), Tahun pembuatan: 2014, kapasitas pengeboran: 60 mm, penjepit spindle: MK 5, Manufacturer: WEILER MAS Model: VOM 50 Year of manufacture: 2014 Specifications Hsdpfx Adjwpkr Njqjnu Metric Arm length: 1,250 mm Max. drilling diameter (steel): 50 mm Max. tapping diameter: M48 Quill stroke: 350 mm Max. distance spindle – table: 1,555 mm Min. distance spindle – table: 305 mm Spindle speed: 800 rpm Tool holder: ISO/Bt/Mk 5 Column diameter: 400 mm Estimated Dimensions Length: 3,200 mm Width: 1,325 mm Height: 2,970 mm Weight: 6,750 kg Please note: The information on this page was provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, this does not constitute a representation or contractual terms. We recommend verifying all critical details.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, Leadscrew and Feed Rod Lathe Weiler Condor 81 *Partially Refurbished* Item Number: 04-03-141 Manufacturer: Weiler Very good overall condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of manufacture: approx. 1986 L x W x H: approx. 2000 x 1000 x 1700 mm Weight: approx. 900 kg Digital display: 3-axis digital readout Sino *New* Specifications: Max. swing over bed: approx. Ø340 mm Max. swing over cross slide: approx. Ø185 mm Max. turning length: approx. 800 mm Bar capacity: approx. Ø42 mm Spindle: Speed range: approx. 30–2800 rpm Spindle nose: A 2-5 Hnsdewl At Dspfx Adqeu Drive power: approx. 3.0 kW Automatic longitudinal & cross feeds: Feed range: approx. 0.016–0.50 mm/rev Thread cutting capability: Metric 0.18 – 28 mm, Imperial 80 – 1 TPI, DP threads 200 – 2 3/4 DP, Module 0.1 – 9 Tailstock: MT3 Accessories: 3-axis digital readout SINO *New* 3-jaw chuck 160 mm *New* Quick-change toolpost size E + 1 insert Bed stop Work lamp *New* Coolant system *New* Complete documentation Emergency stop Various chuck keys Machine feet Electrical chuck guard *New* Leadscrew and feed rod cover *New* Drill chuck *Optional* Live centre *Optional* Additional quick-change toolholders *Optional* Further accessories on request Price and further technical data on request

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1989, Universal lead and feed screw lathe Make: WEILER Model: Condor B Year of manufacture: 1989 - overhauled Newly painted in RAL 7035 light grey Machine no.: 1401 with warranty Accessories: - 3-axis digital readout FAGOR Innova 30i T, new - Chuck guard with electrical interlock, new - Quick-change tool post base unit, size B - Bed stop - Coolant system - Chip guard/rear splash guard - Operating manual - Used, as seen - Hnodsg R S Rcepfx Adqeu

Kondisi: bekas, Tahun pembuatan: 1997, - 4-jaw face plate Ø 550 mm - 3-jaw chuck Ø 310 mm incl. 4 sets of hard base jaws, 1 set of hard top jaws, 8 sets of soft top jaws - Fixed steady rest - Live centre MK5 - Multifix B quick-change toolholder incl. 10 toolholders - Operating hours: 32,582 h - Year of manufacture: 1997 Hjdpfx Ador Hrq Dsqonu - incl. operating manual and technical documentation Technical data: Working area: - Centre distance: 1000 mm - Centre height: 280 mm - Swing diameter over bed: 570 mm - Swing diameter over cross slide: 340 mm - Bed width: 350 mm - Cross slide travel: 340 mm - Top slide travel: 140 mm - Cross slide length: 700 mm - Cross slide width: 220 mm - Bed carriage guide length: 560 mm - Tool cross-section (height/width): 32 x 25 mm Spindle: - Spindle head to DIN 55027: size 8 - Spindle diameter in front bearing: 100 mm - Spindle bore: 66 mm - Main spindle internal taper: metric 70 Main drive: - Drive power 60% / 100% duty cycle: 15 / 11 kW - Max. spindle torque: 1600 Nm - Total speed range: 1 - 2500 rpm - Speed range gearbox stage I: 1 - 625 rpm - Speed range gearbox stage II: 4 - 2500 rpm Feed drive: - Type: three-phase servo drives - Feed range longitudinal and facing: 0 - 10 mm/rev - Longitudinal feed force: 9000 N - Facing feed force: 7000 N - Rapid traverse speed longitudinal/facing: 7 / 3.5 m/min Tailstock: - Quill diameter: 70 mm - Quill stroke: 160 mm - Quill internal taper: MK5 Thread cutting range: - Metric threads: 0.1 - 250 mm - Inch threads: 1/4 - 56 TPI (G/1") - Module threads: 0.125 - 28 - DP threads: 1 - 224 Machine dimensions: - Dimensions LxHxW: 2850 x 1750 x 1815 mm - Machine weight: 2950 kg

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe with 2-Axis Heidenhain Digital Readout from Training Workshop!!! Technical Specifications: Hnodpfxou Afqle Adqju >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speed: 60 – 3,000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse Taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Threads possible: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions (LxHxD): 1.2 m x 1.3 m x 0.65 m Accessories and Equipment: >> 2-axis Heidenhain digital readout >> 1 new 125 mm three-jaw chuck with 2 sets of jaws >> New collet chuck system with collets (new), range 3 mm to 25 mm in 1 mm increments >> Multifix size A quick-change toolpost with 3 tool holders >> Rear splash guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides operate very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This Primus was used in a training workshop. This newer generation of Weiler lathes is highly user-friendly and enables you to achieve ground-like finishes. Take the opportunity to view and test this machine under power on site to convince yourself of its condition.

Kondisi: baik (bekas), Weiler E70 Hohlspindel CNC-Drehmaschine Baujahr: 2003 Hjdjwmqkyopfx Adqjnu Spitzenweite: 2000 mm Spindeldurchlass: 8" (200 mm) Ausstattung: Vorder- und Rückspannfutter Reitstock Feste Lünette

Kondisi: baik (bekas), Lead and feed screw lathe Weiler Condor VS 2 Technical specifications: Centre height: 160 mm Centre distance: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock taper: MT 3 Quill stroke: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (WxDxH), approx.: 1930 x 880 x 1470 mm Features: - 3-jaw chuck - Multifix quick-change toolpost size A incl. 1 tool holder - Electrically interlocked chuck guard - Retrofitted brake motor - Bed stop - Emergency stop button - Coolant system - Machine lamp Hodpju E H Iwofx Adqenu - Chip guard at rear - ELESTA 3-axis digital readout - Live centre The machine has been technically inspected and is in very good condition. Backlash cross-slide: 0.2 mm Backlash top slide: 0.15 mm Inspection under power possible at any time. Price net, ex works, loaded from stock.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, Leadscrew and Feed Shaft Lathe Weiler Commodor *Partially Overhauled* Article No.: 04-03-117 Manufacturer: Weiler Very good overall condition Machine partially overhauled Delivery time: on request – subject to prior sale Year of manufacture: approx. 1991 L x W x H: approx. 2200 x 1200 x 1800 mm Weight: approx. 1,500 kg Digital Readout: 3-axis digital readout Sino *New* Dimensions: Max. turning diameter over bed: approx. Ø380 mm Max. turning diameter over cross slide: approx. Ø190 mm Max. turning length: approx. 1,000 mm Hnjdjwf Dhpjpfx Adqeu Bar capacity: approx. Ø56 mm Spindle: Speed range: approx. 25–2,000 rpm Spindle nose: A 2-6 Drive power: approx. 4.0 kW Automatic longitudinal & cross feeds: Feed range: approx. 0.011–0.80 mm/rev Suitable for threading: Metric 0.30–10 mm, Imperial 80–2 3/4 TPI Diametral pitch 80–5.5 DP, Module 0.2–5 Tailstock: MT4 Equipment: 3-axis digital readout SINO *New* 3-jaw chuck 200 mm *New* Quick-change toolholder size B + 1 insert Bed stop Work lamp *New* Coolant system *New* Complete documentation Emergency stop Various chuck keys Machine feet Electrical chuck guard *New* Leadscrew and feed shaft cover *New* Drill chuck *Optional* Live centre *Optional* Collet chuck system 173E *Optional* Collet set 173E *Optional* Additional quick-change toolholders *Optional* Further accessories on request Price and further technical data on request

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1990, Universal lead and feed screw lathe Brand: WEILER Model: Praktikant 160 B Year of manufacture: 1990 – overhauled Newly painted in RAL 7035 light grey Machine no.: 90-160-2054 Centre height: 160 mm Centre distance: 650 mm Hnsdpohy Tdyjfx Adqsu Geometric acceptance with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i T - Covered lead and feed screw - Braked drive motor - Coolant system - Electrically interlocked chuck guard - Quick-change tool post size A - Simple bed stop - Chip guard (rear wall) - Operating manual With warranty Sold as seen/used The machine is technically compliant with the state of the art at the time of manufacture.

Kondisi: baru, en-001 Hodotznarspfx Adqjnu

Kondisi: baik (bekas), Tahun pembuatan: 1996, Weiler lathe Model: Condor B Center height: 165 mm Center distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 185 mm Spindle head: DIN 55027 size 5 Hedpfx Adevbwd Rsqenu Spindle bore: 40 mm Internal taper main spindle: MK 5 Connected load: 3 kW Speed range: 22–2800 rpm Tailstock taper: MK 3 Weight: 1040 kg 3-jaw chuck 4-jaw chuck Multifix B quick-change tool post Live center

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, Main and Feed Shaft Lathe Weiler Commodor *Partially Overhauled* Article number: 04-03-111 Manufacturer: Weiler Very good overall condition Machine partially overhauled Delivery time: on request – subject to prior sale Year of manufacture: approx. 1991 L x W x H: approx. 2200 x 1200 x 1800 mm Weight: approx. 1500 kg Digital readout: 3-axis digital readout Sino *New* Specifications: Max. turning diameter over bed: approx. Ø380 mm Max. turning diameter over cross slide: approx. Ø190 mm Max. turning length: approx. 1000 mm Bar capacity: approx. Ø56 mm Spindle: Speed range: approx. 25–2000 rpm Spindle nose: A 2-6 Drive power: approx. 4.0 kW Automatic longitudinal & cross feeds: Feed range: approx. 0.011–0.80 mm/rev Suitable for threading: Metric 0.30–10 mm | Imperial 80–2 3/4 TPI Diametral pitch threads 80–5.5 DP | Module 0.2–5 Tailstock: MT4 Accessories: - 3-axis digital readout SINO *New* - 3-jaw chuck 200 mm *New* - Quick-change tool post size B + 1 insert - Bed stop - Work lamp *New* - Coolant system *New* - Complete documentation - Emergency stop - Various chuck keys - Electrical chuck guard *New* Optional: - Drill chuck - Live center - Leadscrew and feed rod cover - Collet attachment 173E - Collet set 173E Hnsdpfx Ajvkv Iyjdqsu - Additional quick-change tool holders Further accessories available on request Price and further technical data on request

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2007, Universal lead and feed screw lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 – overhauled Newly painted in RAL 7035 light grey Machine no.: CK17 Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm With warranty Geometric inspection with test report Accessories: - 3-axis digital readout SIEMENS - Chuck guard with electrical interlock Hsdsv D Ip Njpfx Adqsnu - Braked drive motor - Quick-change tool post, base body size A - Bed stop - Covered lead and feed screw - Chip guard to the rear - Removable chip tray - Operating manual - Used, as seen -

Kondisi: baru, Praktikant VC plus The new dimension in the field of conventional precision lathes. High-quality, energy-efficient, precise, and universally applicable for production, training, and further education. Its strengths include: forward-thinking technology maximum precision long service life operator-friendly ergonomics minimal space requirements and comprehensive accessories The consistent and innovative further development of the proven Praktikant series offers an economical and intelligent solution for your daily applications. Technical Data: WORKING AREA Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Distance between centers: 650 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3: Size 5 Spindle bore: 43 mm Spindle diameter at front bearing: 70 mm MAIN DRIVE Drive power 60%/100% duty cycle: – / 8 kW Speed range: 25 – 5,000 rpm Number of speeds: stepless FEED RANGE Number: stepless Hodpohw N Ntjfx Adqjnu Longitudinal: 0.01 – 6 mm/rev Cross: 0.003 – 2 mm/rev THREAD CUTTING RANGE Metric threads: 0.1 – 20 mm TAILSTOCK Quill diameter: 40 mm Quill travel: 85 mm Morse taper DIN 228: MK 3 ACCEPTANCE ACCURACY: DIN 8605 Equipped with WEILER screen display WTS 15 VC plus - Large and clear 15" touchscreen, rotatable and swiveling, resolution 1366 x 768 - Operation screens switched via swipe gestures - Operation functions accessible via app manager - Control fields can be freely configured, positioned, and scaled - Drawings/sketches in PDF format can be imported via USB and individually zoomed - Video-assisted machine maintenance - Context help menu (instead of the WEILER VC plus screen display) - Coolant system, 18 liters including coolant pump The machine is located at our showroom in 71334 Waiblingen-Beinstein and is available immediately. For equipment details, please contact us.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, Leadscrew and Feedscrew Lathe Weiler Praktikant 160 *Partially Refurbished Item number: 04-03-218 Manufacturer: Weiler Delivery time: on request Very good overall condition Machine partially refurbished Delivery time: on request – subject to prior sale Year of construction: approx. 1993 L x W x H: approx. 1700 x 1000 x 1700 mm Weight: approx. 650 kg Digital Readout: 3-axis Sino digital display *New* Specifications: Hnedpfx Ajhd Uubjdqeu Max. turning diameter over bed: approx. Ø320 mm Max. turning diameter over cross-slide: approx. Ø198 mm Max. turning length: approx. 650 mm Bar capacity: approx. Ø40 mm Spindle: Speed range: approx. 96–2500 rpm Spindle nose: A 2-5 Drive power: approx. 2.2 kW Automatic longitudinal & facing feeds: Feed range: approx. 0.007–0.63 mm/rev Thread cutting capabilities: Metric: 0.25 – 8 mm Inch: 80 – 2 TPI Diametral pitch: 200 – 5 DP Module: 0.2 – 4 Tailstock: MT3 Accessories: - 3-axis digital readout SINO *New* - 160 mm 3-jaw chuck *New* - Quick-change tool post size A + 1 insert - Bed stop - Work light *New* - Coolant system *New* - Full documentation - Emergency stop - Various chuck keys - Machine feet - Electric chuck guard *New* - Leadscrew and feedscrew cover Optional: - Drill chuck - Live center - Collet equipment 386E - Collet set 386E - Additional quick-change tool holders Additional accessories available on request Price and further technical details on request

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1974, Universal lead- and feed-screw lathe Manufacturer: WEILER Model: Commodor Year of manufacture: 1974 - overhauled Newly painted RAL 7035 light grey Machine no.: 0068 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: 56 mm with warranty Geometric acceptance with inspection protocol Equipment: - 3-axis digital readout FAGOR Innova 30i-T, new - Chuck guard with electrical interlock - Quick-change tool post, size B - Simple bed stop - Coolant system - Operating manual Hedpfx Asmgaddodqonu - Used, as seen -

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, lead-and-feed-screw-lathe-weiler-matador-vs2-partially-refurbish ed Item number: 04-03-224 Manufacturer: Weiler Very good overall condition Machine partially refurbished Delivery time: Immediate, subject to prior sale Year of manufacture: approx. 1987 L x W x H: approx. 1500 x 1000 x 1700 mm Weight: approx. 600 kg Hnodpsu Tc Adofx Adqou Digital readout: 3-axis digital readout Sino *new* Specifications: Max. turning diameter over bed: approx. Ø280 mm Max. turning diameter over cross slide: approx. Ø160 mm Max. turning length: approx. 500 mm Bar capacity: approx. Ø36 mm Spindle: Speed range: approx. 15–3550 rpm Spindle nose: A 2-5 Drive power: approx. 3.0 kW Automatic longitudinal & facing feeds: Feed range: approx. 0.05–0.80 mm/rev Suitable for threading: Metric 0.20–12 mm / Inch 80–2 TPI Diametral pitch 160–6 Dp / Module 0.1–4 Tailstock: MT3 Accessories: 3-axis digital readout SINO *new* 3-jaw chuck 160 mm *new* Quick-change toolpost size A + 1 holder Bed stop Work lamp *new* Coolant system *new* Complete documentation Emergency stop Various chuck wrenches Machine feet Electrical chuck guard *new* Collet chuck system 386E *new* Collet set 386E *new* Lead and feed screw cover *optional* Drill chuck *optional* Live centre *optional* Additional quick-change toolholders *optional* Additional accessories available on request Price and further technical details on request