Beli Weiler Praktikus Cnc bekas (182)

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Display K&C, Fully Refurbished with Inspection Report for New Machine Tolerances Technical Data: >> Machine No. 1824 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: 13 to 2000 rpm Gjdsvrcqdspfx Ag Rsuk >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Morse Taper 4 >> Feeds: 0.026 to 0.888 mm/rev >> Thread Types: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Switchable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Equipment and Accessories: >> K&C 3-Axis Digital Readout, new, with 12-month manufacturer’s warranty and user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> 200 mm wedge bar 3-jaw chuck, as new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: Covers for lead and feed screws About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. Guides have been newly ground or hand-scraped. Acceptance with inspection protocol. 2K white gloss paintwork. Accessories (Multifix and chuck) are new. Safety features: The machine has a brake motor, electronic spindle protection, and two emergency stop switches—an absolutely as-new condition lathe. Even at high speeds, the Weiler runs extremely smoothly. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. You are welcome to view and test the machine under power on site to verify its condition.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1989, Universal lead and feed screw lathe Make: WEILER Model: Condor B Year of manufacture: 1989 - overhauled Newly painted in RAL 7035 light grey Machine no.: 1401 with warranty Accessories: - 3-axis digital readout FAGOR Innova 30i T, new - Chuck guard with electrical interlock, new Guedpog R S Rcofx Ag Rsk - Quick-change tool post base unit, size B - Bed stop - Coolant system - Chip guard/rear splash guard - Operating manual - Used, as seen -

Kondisi: baru, Praktikant VC plus The new dimension in the field of conventional precision lathes. High-quality, energy-efficient, precise, and universally applicable for production, training, and further education. Its strengths include: forward-thinking technology maximum precision long service life operator-friendly ergonomics minimal space requirements and comprehensive accessories The consistent and innovative further development of the proven Praktikant series offers an economical and intelligent solution for your daily applications. Technical Data: WORKING AREA Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Distance between centers: 650 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3: Size 5 Spindle bore: 43 mm Spindle diameter at front bearing: 70 mm MAIN DRIVE Drive power 60%/100% duty cycle: – / 8 kW Speed range: 25 – 5,000 rpm Number of speeds: stepless FEED RANGE Number: stepless Guedpfxshw N Ntj Ag Rsk Longitudinal: 0.01 – 6 mm/rev Cross: 0.003 – 2 mm/rev THREAD CUTTING RANGE Metric threads: 0.1 – 20 mm TAILSTOCK Quill diameter: 40 mm Quill travel: 85 mm Morse taper DIN 228: MK 3 ACCEPTANCE ACCURACY: DIN 8605 Equipped with WEILER screen display WTS 15 VC plus - Large and clear 15" touchscreen, rotatable and swiveling, resolution 1366 x 768 - Operation screens switched via swipe gestures - Operation functions accessible via app manager - Control fields can be freely configured, positioned, and scaled - Drawings/sketches in PDF format can be imported via USB and individually zoomed - Video-assisted machine maintenance - Context help menu (instead of the WEILER VC plus screen display) - Coolant system, 18 liters including coolant pump The machine is located at our showroom in 71334 Waiblingen-Beinstein and is available immediately. For equipment details, please contact us.

Kondisi: bekas, Tahun pembuatan: 1970, Weiler lathe with tailstock Godpfx Ajhtnu Teg Rjuk

Kondisi: baik (bekas), WEILER COMMODOR Mesin Bubut L&Z - Diameter pembubutan 180 mm - Panjang pembubutan 1000 mm - Lubang batang 56 mm - Rentang kecepatan putar 25-2000 rpm Guedpfx Agsw Nnvwj Rek - Ulir metrik / inci, dll. - Otomatis gerakan memanjang / melintang - Tailstock MK 4 - Chuck tiga rahang 250 mm - Pelindung chuck elektrik - Multifix dengan insert - Sistem pendingin - Dinding pelindung serpihan - Dokumentasi mesin - Kondisi siap pakai yang baik Dimensi: P x L x T 2,5 x 1,3 x 1,7 meter / Berat 1.500 kg Kesalahan penulisan/data dapat terjadi

Kondisi: bekas, Swing diameter over bed / mm Swing diameter over cross slide / mm Turning length / mm Guodpfxowgi Tmo Ag Rok

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Data: >> Year of manufacture: approx. 1970 Machine No. M1012 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 30 – 3550 rpm >> Spindle bore: 36 mm >> Short-taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper: MK 3 Gusdpsvv Etvjfx Ag Rjk >> Feeds: 0.010 to 1.184 mm/rev >> Possible thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 15 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> Collet chuck with 32 collets (set is incomplete) with adapter >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 1 set of jaws >> Multifix tool post size A with 2 tool holders >> Change gears >> Bed stop About the Machine: Offered here is a used Weiler Matador VS-2 in full working condition. Take the opportunity to inspect and test the machine under power on site to verify its condition.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2007, Universal lead and feed screw lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 – overhauled Newly painted in RAL 7035 light grey Machine no.: CK17 Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm With warranty Geometric inspection with test report Accessories: - 3-axis digital readout SIEMENS - Chuck guard with electrical interlock Gusdpfov D Ip Nox Ag Rjk - Braked drive motor - Quick-change tool post, base body size A - Bed stop - Covered lead and feed screw - Chip guard to the rear - Removable chip tray - Operating manual - Used, as seen -

Kondisi: baik (bekas), Tahun pembuatan: 2014, kapasitas pengeboran: 60 mm, penjepit spindle: MK 5, Manufacturer: WEILER MAS Model: VOM 50 Year of manufacture: 2014 Specifications Metric Arm length: 1,250 mm Max. drilling diameter (steel): 50 mm Max. tapping diameter: M48 Quill stroke: 350 mm Max. distance spindle – table: 1,555 mm Gedewpkr Nspfx Ag Rjuk Min. distance spindle – table: 305 mm Spindle speed: 800 rpm Tool holder: ISO/Bt/Mk 5 Column diameter: 400 mm Estimated Dimensions Length: 3,200 mm Width: 1,325 mm Height: 2,970 mm Weight: 6,750 kg Please note: The information on this page was provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, this does not constitute a representation or contractual terms. We recommend verifying all critical details.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 40 mm, tinggi pusat: 165 mm, lebar di tengah: 750 mm, Dear Sir or Madam, We are offering for sale a Weiler Condor B lathe. This model is particularly notable for its user-friendly operation and an excellent ratio of footprint to center height/center distance. The Condor B is positioned in size between the Weiler Praktikant and the Weiler Commodor, making it a true all-rounder in any workshop. The machine undergoes a comprehensive partial overhaul in our workshop, ensuring both excellent technical condition and visual appearance. All guideways are in good order, the gearboxes run quietly, and the levers operate smoothly. You are welcome to inspect the machine on site to verify its condition. Availability: On request Centre height: 165mm Centre distance: 750mm Spindle bore: Ø 40mm Tailstock taper: MT3 Chuck mounting: Short taper DIN55027 size 5 with bayonet lock Quill travel: 85mm Spindle speeds: 22-2800 rpm Possible thread types: Metric, Whitworth, Module, Diametral Pitch Metric thread pitches: 0.18 - 28mm Spindle brake: switchable Voltage: 400V Dimensions: approx. 1.80x1.30x0.9m (LxHxW) Weight: approx. 1100kg Additional features and accessories: 3-axis digital readout K+C (NEW), chuck guard (NEW), coolant system, 2x emergency stop, leadscrew and feed shaft cover (optional), operating manual, and much more available upon request… Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are at least workshop-inspected - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can fully or partially overhaul the selected machine - Upon request, we can repaint the selected machine in your desired color - Upon request, you can order additional accessories such as tools - Upon request, we can fit additional accessories such as safety devices Godpjw N Np Sofx Ag Rouk - We are happy to arrange shipping and/or installation

Kondisi: sangat baik (bekas), WEILER CONDOR dalam kondisi asli yang sempurna -Mesin dari lembaga pendidikan -Rel pemandu seperti "BARU" -Display digital tiga sumbu "Baru" -Chuck tiga rahang 200 mm "Baru" -Perlengkapan collet termasuk set collet "BARU" -Multifix dengan sisipan "Baru" -Perlindungan chuck elektrik -Chuck empat rahang -Mata pusat putar + chuck bor -Dokumentasi -Cat asli -Diameter putar 330 mm -Diameter putar di atas support 170 mm -Panjang putar 800 mm -Lubang spindle 38 mm -Putaran spindle 24-2800 rpm Gedpfx Agjw Iv U Ss Reuk -Otomatis feeding memanjang / melintang -Tailstock MK 3 -Lampu kerja -Emergency stop / mati Dimensi: P x L x T 1,9 x 0,9 x 1,6 meter / Berat 850 kg Kesalahan atau kesalahan input datar dikoreksi seperlunya.

Kondisi: baik (bekas), Perfekte Hochleistungsmaschine für Döner-, Burger- oder Tierfutterfabriken. Godpfx Agswlfxvo Rjuk

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Shaft Bench Lathe in Excellent Condition!!! Technical Data: >> Machine No. 2801 >> Centre Height: 120 mm >> Centre Distance: 430 mm >> Speed Range: 60 – 3000 rpm in 18 gear steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 55027 >> Tailstock MT 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting options: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: Gedpfx Agev Tyzcs Rjuk >> 1 piece Röhm 3-jaw chuck 125 mm with 4 sets of jaws >> Collet clamping device with collets from 2 mm to 12 mm in 1 mm increments with draw tube >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady >> Faceplate >> Spindle guard >> Clamping tools About the Machine: For sale is a Weiler Primus lead and feed shaft bench lathe in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a government-operated facility where it saw little use. This newer generation of Weiler lathes is very operator-friendly and allows for ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see its condition for yourself. (The base cabinet is included; it is not bolted to the machine.) Digital readout available at extra cost.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1990, Universal lead and feed screw lathe Brand: WEILER Model: Praktikant 160 B Year of manufacture: 1990 – overhauled Newly painted in RAL 7035 light grey Machine no.: 90-160-2054 Centre height: 160 mm Guedpshy Tdyefx Ag Rek Centre distance: 650 mm Geometric acceptance with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i T - Covered lead and feed screw - Braked drive motor - Coolant system - Electrically interlocked chuck guard - Quick-change tool post size A - Simple bed stop - Chip guard (rear wall) - Operating manual With warranty Sold as seen/used The machine is technically compliant with the state of the art at the time of manufacture.

Kondisi: baik (bekas), Centre distance: 800 mm Spindle bore: 38 mm Centre height: 165 mm Gedpfx Asukrtneg Rsuk Swing over bed: 330 mm Swing over cross slide: 170 mm Spindle speed: 24–2800 rpm Dimensions: 1600 mm x 600 mm x 1250 mm Weight: 850 kg

Kondisi: bekas, Tahun pembuatan: 1986, Swing over bed: 320 mm Swing over cross slide: 198 mm Turning length: 650 mm Total power requirement: 2.2 kW Machine weight approx.: 650 kg Guodpfxsufud Do Ag Rjk Space required approx.: 1700x1000x1700 mm Digital display: 3-axis digital readout Bar capacity: Ø 40 mm Speed range: 96 - 2500 rpm Spindle nose: A 2 - 5 Feed range: 0.007 - 0.63 mm/rev Thread cutting capability: metric 0.25 - 8 mm, inch 80 - 2 TPI, diametral pitch 200 - 5 DP, module 0.2 - 4 Tailstock: MT 3 3-jaw chuck: 160 mm Quick-change tool post Multifix: Type B

Kondisi: baru, Leit & Zugspindeldrehmaschinen WEILER COMMODOR 180 GSD -New machine / Demonstration model / Unused -3-axis digital readout -CE marking -Center height: 180 mm -Center distance: 1000 mm -Bar capacity: 56 mm -Swing over bed: 380 mm -Swing over cross slide: 215 mm -Speed range: 25 – 2000 rpm -Automatic longitudinal / cross feeds -Thread cutting: Metric / Imperial / Diametral -Tailstock taper: MK4 -Tailstock quill travel: 150 mm -Coolant system -Multifix quick-change toolpost with insert -3-jaw chuck, 200 mm -Work lamp -Chip guard/rear splash guard -Documentation Dimensions: LxWxH: 2.4 x 1.4 x 1.7 meters / Weight: 1,700 kg Gsdpfowucv Rsx Ag Reuk Errors and omissions excepted.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 40 mm, tinggi pusat: 140 mm, panjang pembubutan: 500 mm, kecepatan spindel (maks.): 4.000 rpm, kecepatan spindel (min.): 30 rpm, kecepatan rotasi (maks.): 4.000 rpm, kecepatan rotasi (min.): 30 rpm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Centre distance: 500 mm Centre height: 140 mm Spindle bore: 40 mm Spindle speed: 30 - 4000 rpm Weight: approx. 800 kg Dimensions: approx. 1430 x 935 x 1550 mm Gujdpevnr E Nefx Ag Rjk Accessories: operator's manual, lamp, Multifix tool holder, collet chuck (at extra cost) Further accessories available on request

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor 81, lead and feed screw lathe with 3-axis digital readout from K&C, NEW Geometrically overhauled with acceptance protocol covering new machine tolerances Technical Data: >> Machine No. 84-121 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027 size 5, with bayonet lock >> Tailstock: MT 3 Gsdpswrm Dtofx Ag Rjuk >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Features: >> 3-axis digital readout by K&C, new, 12 months manufacturer warranty, with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter mode, quick zeroing, direction reversal >> Collet chuck new, collets new from 3 to 26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix size B, new, with 3 toolholders >> Bed stop >> Electrical chuck guard, new >> Rear chip guard >> Operators manual >> Coolant system >> Machine levelling pads About the Machine: Offered is a Weiler Condor 81 lead and feed screw lathe in excellent, geometrically overhauled condition. The bedways have been reground and/or hand-scraped as new. Delivery with inspection protocol. Accessories such as collets and chuck are new. Safety features: The machine is equipped with a braking motor, electronic spindle guard, and two emergency stop switches – making it an as-new condition lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like finish surfaces to be produced. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1974, Universal lead- and feed-screw lathe Manufacturer: WEILER Model: Commodor Year of manufacture: 1974 - overhauled Newly painted RAL 7035 light grey Machine no.: 0068 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: 56 mm with warranty Geometric acceptance with inspection protocol Equipment: - 3-axis digital readout FAGOR Innova 30i-T, new - Chuck guard with electrical interlock - Quick-change tool post, size B - Simple bed stop - Coolant system - Operating manual Guodpjmgaddjfx Ag Rok - Used, as seen -

Kondisi: bekas, Tahun pembuatan: 1985, Weiler Praktikant 140 lathe, year of manufacture 1985, three-jaw chuck, Multifix quick-change tool post. The Z-axis guideway shows slight wear at the front section. The machine is in good, ready-to-use condition. Can be demonstrated under power by prior arrangement. Gujdsv N Awfjpfx Ag Rek

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 40 mm, tinggi pusat: 160 mm, panjang pembubutan: 650 mm, kecepatan spindel (maks.): 3.000 rpm, kecepatan spindel (min.): 20 rpm, kecepatan rotasi (maks.): 3.000 rpm, kecepatan rotasi (min.): 20 rpm, berat keseluruhan: 800 kg, penjepit spindle: MK 3, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Availability: on request Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Gedjvnrzqspfx Ag Rjuk Spindle speed: 20–3000 rpm, stepless Tailstock taper: MT3 Quill travel: 85 mm Longitudinal feed range: 0.020 – 0.630 mm/rev Cross slide feed range: 0.006 – 0.200 mm/rev Possible thread types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.58 x 0.9 x 1.5 m (L x H x W) Additional features and accessories: 3-axis digital readout, coolant system, chuck guard, jaw chuck and further accessories available on request...

Kondisi: sangat baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, en-Weiler Praktikant 160 B Leadscrew and Feed Shaft Lathe with 3-Axis Digital Readout K&C NEW Technical Data: >> Year of manufacture: 1986 Machine no.: 86-160-348 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds (8 steps): from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.02 to 0.63 mm/rev >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake selectable >> Length: 1.6 m, Height: 1.25 m, Depth: 0.7 m Gusdpfxjwthbie Ag Rjk Accessories and Features: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck, collets as new from 1 to 29 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear splash guard >> Machine feet >> Coolant system About the Machine: A Weiler Praktikant 160 B leadscrew and feed shaft lathe is being offered here, built to toolmaker’s precision and in very good condition. The machine is, of course, fully functional. The Weiler has been completely dismantled and newly painted in light grey. All cross slides move very smoothly and evenly. The Weiler also runs smoothly at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and capable of producing ground-like surface finishes. Take the opportunity to view the machine under power on site and see the condition for yourself.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant 160B Precision Centre Lathe with 3-Axis K&C Digital Readout, NEW. Overhauled, including acceptance protocol certifying new-machine tolerances. Technical Specifications: >> Machine No.: 87 160 760 >> Centre height: 160 mm >> Distance between centres: 650 mm >> Spindle speeds: 24 to 2,500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5, with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch Guodpfovrdlcex Ag Rek >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Electrically selectable spindle brake >> Dimensions (LxHxW): 1.6 m x 1.25 m x 0.7 m Equipment & Accessories: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty, incl. operation manual Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, selectable count direction >> New collet chuck, NEW collets 3–25 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix tool post size A, with 3 steel holders >> Electronic spindle guard >> NEW LED machine lamp >> NEW machine mounts >> Splash guard >> Operating manual and spare parts plan (PDF) About the Machine: Offered is a Weiler Praktikant 160 B engine lathe with leadscrew and feedscrew, reconditioned to toolroom accuracy and fully geometrically overhauled, including an acceptance protocol confirming new-machine tolerances. Safety features: electronic spindle guard, covers for leadscrew and feedscrew, 2 emergency stop buttons, and a braking motor. This latest generation of Weiler lathes is highly user-friendly and enables ground-like surface finishes. Take the opportunity to inspect and test the machine under power onsite to verify its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C - NEW Geometrically overhauled with acceptance protocol for new machine tolerances! Technical Data: >> Machine No. 90-1495 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged Godpfovambcox Ag Rouk >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter selection, quick zeroing, counting direction selection >> Collet chuck system, new collets from 3 to 26 mm in 1 mm steps >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix quick-change toolpost, new, size A, with 2 new tool holders >> Bed stop >> Electric chuck guard, new >> Machine lamp, LED, new >> Rear splash guard >> Operating manual >> Coolant device >> Machine levelling feet About the Machine: For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, absolutely as-new condition. The guideways have been newly ground and hand-scraped. Acceptance as per inspection protocol. A very fine machine with electronic spindle guard. The accessories—collets, chuck, Multifix—are new. Spindles, nuts, bearings, belts, and wipers have been renewed. Take the opportunity to view this machine under power on site and see the condition for yourself.