Mesin press bal 80 t dengan teknologi konveyor

Paal GmbH Konti 275 E

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, daya: 22 kW (29,91 hp), berat keseluruhan: 2.600 kg, Tahun pembuatan: 2006, Cutting unit width: 600 mm Cutting unit length: 1,200 mm Center distance between cutter shafts: 250 mm Cutter shaft speed: approx. 16 rpm Cutter shaft torque: approx. 17,000 Nm Feed hopper: 1,200 mm x 2,400 mm Drive power: 2 x 11 kW Total drive power: 22 kW Fsdpfotzbvyox Adgsft Weight: 2,600 kg

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2012, jam operasional: 25.895 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 24.000 kg, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), laju aliran volumetrik: 930 m³/jam, Technical Data — Baler: Manufacturer: Presona AB Type: LP 80 VHK 1 Year of manufacture: 2012 Total operating hours (machine): 25,895 hours (as of July 2025) Effective pump operating hours: 14,135 hours (as of July 2025) Number of bales produced: 235,597 units (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/hour Throughput under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: 30 kg/m³: approx. 9 to 12 t/hour, material-dependent 50 kg/m³: approx. 14 to 17 t/hour, material-dependent 100 kg/m³: approx. 16 to 25 t/hour, material-dependent Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, material-dependent Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions (installed with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine weight (baler): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. After completion of the work, it was tested during live operation, both in manual and automatic mode. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers on the press ram replaced - Wire station with guide rollers for the bottom wire cleaned and made operational - Side guides removed from press ram, smoothed, reinstalled and readjusted - Main hydraulic cylinder removed, dismantled and inspected - Piston rod replaced, cylinder tube honed - Complete seal kit replaced, pressure test performed - Hydraulic hose from main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying disassembled, cleaned, wire guide rollers made operational and maintained - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire knives, twister shafts and twister fingers checked, torqued, and serviced - Door contact switches checked and partially replaced - Emergency stop button tested - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers below the baler replaced - New safety grids for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed and baler tested in manual and automatic operation Scope of delivery: Ffjdpfxsvwlqqj Adgjt Only the baler is for sale. Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete and available. An inspection can be arranged by appointment. We assume no liability for technical specifications or possible errors.

Tahun pembuatan: 2006, jam operasional: 15.000 h, Kondisi: baik (bekas), For sale is an Erema 1007T Year of manufacture: 2006 Operating hours: 15,420 Throughput capacity: 250-350 kg/h Ffjdsumubyopfx Adgot Currently, the system is processing HDPE, but it is also suitable for other plastics such as LDPE... The machine can be inspected during operation. A new extruder screw was installed in February.

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Shear rotor, shredder dua poros, Daya penggerak: 110 kW (2 x 55 kW), Arus nominal: 210 ampere Lebar pisau: 75 mm Ukuran unit pemotong: panjang 1600 mm x lebar 980 mm Sistem penggantian pisau cepat, gearbox SEW, Termasuk unit penekan hidrolik, daya hidrolik nominal: 7,5 kW, Panel kontrol, Unit pemotong telah direkondisi, Dimensi: panjang sekitar 6150 mm x lebar sekitar 3100 mm x tinggi sekitar 3150 mm, Fedpfx Aswva Hiodgoft Berat total: sekitar 17 ton

Kondisi: bekas, Tahun pembuatan: 2010, PPN/pajak selisih: PPN dapat dikreditkan Ffjdpfjvpghzsx Adgst

Kondisi: belum diuji (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, panjang bal: 1.000 mm, lebar bal: 750 mm, tinggi bal: 750.750.750 mm, berat bal: 500 kg, tegangan masuk: 400 V, berat keseluruhan: 7.500 kg, kapasitas tangki oli: 500 l, daya: 30 kW (40,79 hp), berat kosong: 7.500 kg, frekuensi input: 50 Hz, Manufacturer: Pal Pacomat V Year of manufacture: 1985 Ffedpfx Adeic Rl Degjt Main press force: 50 t Specific pressing force: 5 kg/cm² Feeding channel: 1,000 x 720 mm (L x W) Theoretical throughput capacity: 200 m³/h Bale size: 700 x 1,000 mm (W x H), length adjustable Drive motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8 t The hydraulic unit is functional, the drive motor is currently removed.

Kondisi: bekas, Tahun pembuatan: 2011, nomor mesin/kendaraan: 340000674, The HSM baling press V-Press 403 is a compact solution for the efficient compaction of waste and recyclable materials. This used press delivers outstanding performance and is ideal for businesses looking to optimize their waste management and save space. With its robust construction and user-friendly operation, it is perfectly suited for use across various sectors. Technical specifications: Machine No.: 6113.114 Serial number: 340000674 Pressing force: 33 kN Power supply: 400 V / 50 Hz Dimensions: approx. 1,200 x 800 x 1,500 mm (L x W x H) Motor output: 1.1 kW Rated current: 2.6 A Year of manufacture: 2011 Weight: approx. 300 kg Ffodpfxounzn Ns Adget

Kondisi: bekas, Tahun pembuatan: 2003, Technical details: Pressing force: 40 t Hopper opening: 1200 x 730 mm Material: Cardboard, plastic – e.g., PET bottles Voltage: 400 V / 50 Hz Total power requirement: 16.4 kW Transport dimensions (machine): 6.5 x 6.2 x 2.7 m Fully automatic hydraulic CHANNEL BALER for recycling applications Fedpsu Nw Ezjfx Adgeft – Incl. feed unit/conveyor belt, LxW: 4500 x 1000 mm, motor-driven – Equipped with automatic 3-fold tying unit – Bale counter/display Press chamber (LxWxH): 1800 x 800 x 800 mm with 1.2 m³ volume Bale size (LxWxH): 300–1500 x 800 x 800 mm Bale weight: 250–450 kg, depending on material and bale length Filling opening (LxW): 1200 x 730 mm; Filling height: 1200 mm Hopper size (LxWxH): 1200 x 1200 x 1400 mm; Fill height: 2500 mm

Tahun pembuatan: 2003, jam operasional: 43.000 h, Kondisi: perlu perbaikan (bekas), nomor mesin/kendaraan: HBC 140 2x75kW 2003 (W230-005), nl-naar-en Ffodokcgynspfx Adgst

Tahun pembuatan: 2008, Kondisi: bekas, 20081 Fsdjw Ia Ngjpfx Adgjft