Mesin pengepakan bal

Paal Konti 200 D

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, A SIG Corpoplast blow molding machine is available. Output: 21,600 bottles/hour. Bottle formats: 500ml/750ml/1000ml/1500ml. Maximum blow air pressure: 40 bar. Dimensions (L/W/H): approx. 7000mm/4300mm/3100mm. Weight: approx. 20,000kg. Includes Transver AG preform feeding system, year of manufacture: 2008, silo, elevator, sorting unit, and chute. Documentation is available. On-site inspection possible. Fodot Eu Azopfx Am Segc

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, tahun perombakan terakhir: 2025, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. Fsdpfx Amevf E Avs Sjgc - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: belum diuji (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, panjang bal: 1.000 mm, lebar bal: 750 mm, tinggi bal: 750.750.750 mm, berat bal: 500 kg, tegangan masuk: 400 V, berat keseluruhan: 7.500 kg, kapasitas tangki oli: 500 l, daya: 30 kW (40,79 hp), berat kosong: 7.500 kg, frekuensi input: 50 Hz, Manufacturer: Pal Pacomat V Year of manufacture: 1985 Main press force: 50 t Specific pressing force: 5 kg/cm² Feeding channel: 1,000 x 720 mm (L x W) Theoretical throughput capacity: 200 m³/h Bale size: 700 x 1,000 mm (W x H), length adjustable Drive motor: 30 kW Bale weight: approx. 500 kg Fedpjic Rl Djfx Am Sogc Machine weight: approx. 8 t The hydraulic unit is functional, the drive motor is currently removed.

Kondisi: siap digunakan (bekas), HSM VK 42/1200 fully automatic baler Pressing force: 42 tons Bale dimensions: 700 x 800 x 600 - 1200 mm Fjdpfxora Nrxj Am Segc Bale weight: approx. 450 kg Baler length: approx. 7 meters Baler weight: approx. 6,000 kg Automatic 4-fold wire tying

Kondisi: sangat baik (bekas), MECHANICAL ROLLER SHREDDER DOPPSTADT model: DW 3060 E1 COMPLETE WITH ENGINE, HYDRAULIC POWER UNIT, DISCHARGE CONVEYOR BELT, AND ELECTRICAL CONTROL PANELS Year: 2005 Dimensions: Total length: 7,900 mm Total width without walkway: 2,950 mm Total height: 5,600 mm Loading width: 1,900 mm Loading length: 3,060 mm Fjdpfx Ajun Sx Som Segc Total weight: approx. 30,000 kg With engine: 315 kW Rotation speed: 2,000 rpm With hydraulic power unit: 7.5 kW Cutting roller size: Length: 3,000 mm Rotor diameter: 600 mm Speed: 31 rpm Rotor: 1 Number of rotor teeth: 21 Tooth width: 60 mm Tooth height: 150 mm Wear protection bands material (rotor): HARDOX 400 Comb: 1 Number of comb teeth: 22 Comb tooth width: 60 mm Effective width of discharge belt: 1,000 mm Installed power: 5.5 kW

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2008, - Mesin dalam kondisi teknis dan optik yang sangat baik - Tersedia segera Fodpfsy Dc Nvsx Am Sogc - Penjualan termasuk: - Gunting scrap: Zato FCE40 atau Genesis GXP400R - Lengan (boom) - Perlengkapan tambahan tersedia secara terpisah

Kondisi: bekas, Tahun pembuatan: 1992, Automatic PET Bottle Stretch Blow Moulding Machine Manufacturer: SIDEL Model: SBO 4 S1 Year of manufacture: 1992 Output capacity: 4,000 for 1.5 L / 2 L bottles Installed power: 150 kW Fgedpewa Rhrsfx Am Sec Included: 1.5 L moulds Preform feeder Technical condition: used machine, operational, program functioning properly

Tahun pembuatan: 2022, Kondisi: baru, Complete solution for the transport of bulk materials such as wood chips, wood pellets, shredder material, granulate, etc. Aluminum angled conveyor belt incl. subframe Horizontal section: 2,500 mm (adjustable) Inclined section: 4,000 mm (adjustable) Angle at the bend continuously and freely adjustable Feed height: horizontal (customizable) Discharge height individually adjustable Fsdjilg U Espfx Am Segc Construction: height-adjustable (mobile) Conveyor belt width: 600 mm (adjustable) We supply our conveyor belts in PVC, PU, felt, or rubber. PU conveyor belt incl. cleats and wave edge Drive: 1.1 kW motor (adjustable), speed approx. 0.3 m/sec Connection 220/240V, 50Hz, protection class IP54 Drive and accessories ready for connection, motor control optional 8x adjustable machine feet for alignment Wave edge: 50 x 30 mm T-40 cleats - 300 mm pitch 2-ply, especially dimensionally stable across the belt We always have several such systems in stock. The delivery time for a customized system currently amounts to approximately 2–3 weeks, depending on manufacturing effort. Our core competence lies in providing customers exactly with the solution they truly need. We work together with our customers to develop custom, tailored solutions and deliver corresponding systems from our own production. Please feel free to contact us by phone as well, so we can find the right solution for your application. Conveyor, conveyor system, discharge belt, belt conveyor, magnetic separator, crossbelt magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator

Kondisi: baru, Tahun pembuatan: 2024, ♻ Universal application (wood, pallets including nails and staples, fibreboard and offcuts, veneers, MDF boards, plastic, etc.) ✔ Motor power: 30 kW ✔ Rotor length: 870 mm ✔ Rotor diameter: 270 mm ✔ Rotor speed: 80-120 rpm ✔ Number of cutting knives: 2x19 ✔ Granulation: 10-50 mm ✔ Capacity: up to 7 m³/h* ✔ Extraction port: 200 mm ✔ Feed opening: 1446 x 1565 mm ✔ Dimensions (L/W/H): 2.15/1.97/2.04 m ✔ Weight: 2050 kg 2 years warranty or 2000 operating hours Fgsdpfxsiq U D Es Am Sjc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 37.656 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 85 t, lebar bukaan pengisian: 1.500 mm, panjang bukaan pengisian: 1.100 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 650 kg, berat keseluruhan: 25.000 kg, kapasitas tangki oli: 1.000 l, tahun perombakan terakhir: 2024, laju aliran volumetrik: 410 m³/jam, lebar transportasi: 2.400 mm, panjang transportasi: 9.300 mm, Good day, We hereby offer you, subject to prior sale, a used baler from the manufacturer Presona AB, type LP 85 VH1. Fgodpfx Aev T I Evem Ssc The following technical data has been taken from the manufacturer's operating manual and brochures. We do not assume any liability for the accuracy and completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale size: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Baler dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Machine weight (press): approx. 25 t Note: The machine was used by a recycling company for compaction of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The baler is in good condition. Many wear parts and entire assemblies have already been renewed in the last 3 years. The machine has been regularly maintained. We would be pleased if this baler is of interest to you. Your Service Team, Mertens & Frowein GmbH