Baler

Packstation Bergmann PS 1400

Tahun pembuatan: 1982, Kondisi: baik (bekas), nomor mesin/kendaraan: 14320, BALER / PAPER BALER Godpfx Adoiuky Ietett

Tahun pembuatan: 2021, Kondisi: seperti baru (mesin pameran), Overband plate magnet Made of stainless steel 1.4301, fully welded construction Gsdpfxed Evl Do Adtjtt including cleaning drawer Dimensions: 800 x 500 x 180 mm completely welded housing lifting eyes for suspension

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2012, jam operasional: 25.895 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 24.000 kg, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), laju aliran volumetrik: 930 m³/jam, Technical Data — Baler: Manufacturer: Presona AB Type: LP 80 VHK 1 Year of manufacture: 2012 Total operating hours (machine): 25,895 hours (as of July 2025) Effective pump operating hours: 14,135 hours (as of July 2025) Number of bales produced: 235,597 units (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/hour Gtjdpsvwlqqjfx Adtet Throughput under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: 30 kg/m³: approx. 9 to 12 t/hour, material-dependent 50 kg/m³: approx. 14 to 17 t/hour, material-dependent 100 kg/m³: approx. 16 to 25 t/hour, material-dependent Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, material-dependent Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions (installed with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine weight (baler): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. After completion of the work, it was tested during live operation, both in manual and automatic mode. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers on the press ram replaced - Wire station with guide rollers for the bottom wire cleaned and made operational - Side guides removed from press ram, smoothed, reinstalled and readjusted - Main hydraulic cylinder removed, dismantled and inspected - Piston rod replaced, cylinder tube honed - Complete seal kit replaced, pressure test performed - Hydraulic hose from main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying disassembled, cleaned, wire guide rollers made operational and maintained - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire knives, twister shafts and twister fingers checked, torqued, and serviced - Door contact switches checked and partially replaced - Emergency stop button tested - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers below the baler replaced - New safety grids for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed and baler tested in manual and automatic operation Scope of delivery: Only the baler is for sale. Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete and available. An inspection can be arranged by appointment. We assume no liability for technical specifications or possible errors.

Kondisi: baru, Tahun pembuatan: 2024, Hacker knives 40 x 40 concave Knives for Weima, Gross ... Suitable for almost all common chippers/shredders Gtsdpfx Adobxu Dhotjt Available from stock in Bitburg Subject to prior sale

Kondisi: bekas, Tahun pembuatan: 2003, Technical details: Pressing force: 40 t Hopper opening: 1200 x 730 mm Material: Cardboard, plastic – e.g., PET bottles Voltage: 400 V / 50 Hz Total power requirement: 16.4 kW Transport dimensions (machine): 6.5 x 6.2 x 2.7 m Fully automatic hydraulic CHANNEL BALER for recycling applications – Incl. feed unit/conveyor belt, LxW: 4500 x 1000 mm, motor-driven – Equipped with automatic 3-fold tying unit – Bale counter/display Press chamber (LxWxH): 1800 x 800 x 800 mm with 1.2 m³ volume Gtodpfx Adsu Nw Ezotet Bale size (LxWxH): 300–1500 x 800 x 800 mm Bale weight: 250–450 kg, depending on material and bale length Filling opening (LxW): 1200 x 730 mm; Filling height: 1200 mm Hopper size (LxWxH): 1200 x 1200 x 1400 mm; Fill height: 2500 mm

Kondisi: baru, - Motor power: 9 kW - Control: PLC-assisted, two-hand safety control - Cutting force: 35 tons - Splitting table: straight design - Cutting channel: - Max. blade length: L = 2000 mm - Max. opening: H = 1200 mm - Machine weight: approx. 4 tons - Hand protection grid in the area of the operator panel and on the opposite side Gjdpfx Adsd Hf Tdetott - Forklift entry shoes included (for easy transportation of the machine by forklift) In stock – immediately available Price and further information upon request

Kondisi: baru, Tahun pembuatan: 2024, Consisting of a bale breaker for large bales, type MHB, and straw shredder type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (Approx. 15 weeks production time) Suitable for round or square bales. Including frequency inverter (controls the speed of the scraper floor). The bales are placed on the scraper floor and the cutter head feed is switched on. The cutter head tines tear the straw from the bale and throw it into the hopper. Ideally, this machine is combined with a straw shredder. Technical data for bale breaker: Capacity: 1–2 bales per hour Up to a maximum of 600 kg per hour (depending on the installed sieve size in the straw mill, kW rating of the straw mill). Without a straw mill, the bale breaker can process up to 900 kg/hr of straw. Maximum square bale size: 2400 x 1200 x 800 mm (LxWxH) Cutter head motor: 5.5 kW, 380 V Scraper floor feed: 0.75 kW, 380 V Dimensions: 3750 x 1730 x 2460 mm (LxWxH) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Gtsdpfx Adjb Nulhetet Surcharge for the larger straw shredder (18.5 kW): +€3,940 net Technical data, MHZ with special feed hopper: Motor: 15 kW, 380 V electric motor Diameter: 600 mm Hardened cutting knives Screen with interchangeable inserts Selectable perforation (10, 12, 15) 22, 30, 45 mm With star-delta switch, overload protection, and 8 m power cable, ready to plug in Discharge spout: 160 mm Blowing distance: approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (LxWxH) Weight: approx. 240 kg --- Options at extra cost: Feed auger: +€970 net Cyclone (suspension by customer) *should be no more than 10 m away +€2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstration unit) + from €9,950 net Optional rotary valve (renders material pressureless) +€5,750 net Control system: from €1,620 net Special bale breaker extension 3m (other dimensions upon request) +€9,750 net Briquetting press MPP 180 S; little-used demonstration unit 70 mm briquette – up to max. 100 kg/hr from €39,700 net * Larger machines available on request --- Description: muetek bale breaker was developed for processing round and square bales of hay and straw. The attached shredder processes straw from all types of cereal crops, hay, corn, and miscanthus. muetek machines from the MHZ/MHB series are characterized by their robust design and heavy-duty construction. muetek bale breakers of the MHB series are equipped with a chain conveyor onto which the bale is placed using a front loader. The support is adjustable depending on the type of bale. The chain conveyor pushes the bale against the cutter rotor; the feed speed is adjustable. The cutter rotor is fitted with multiple teeth which rip open the straw bale. The separated straw is then discharged. --- The machines are generally designed for dry materials: - Straw - Hay --- Processing hemp bales is only possible with a special bale breaker Surcharge approx. €9,720 net (depending on configuration) Straw mills are not suitable for processing hemp. Material requirements: Maximum moisture content: 12%

Kondisi: baru, Tahun pembuatan: 2025, Daya motor 7,5 kW - Gaya pemotongan 30 ton Saluran pemotongan dirancang untuk - panjang rol maks. 1500 mm - diameter rol maks. 850 mm - Berat mesin sekitar 3.500 kg - Kapasitas tangki sekitar 110 liter - Kisi pelindung tangan di area panel kontrol dan sisi seberangnya - Pengunci pisau - Meja pemisah model lurus Gedpfx Adegl Adzjtstt - Dokumentasi 2 rangkap dalam bahasa Jerman (1x bentuk teks, 1x CD) - Warna RAL 5012 - biru muda Kisi pelindung/palang pisau RAL 1028 kuning melon Mesin tersedia di gudang dan siap dikirim segera Harga dan informasi lebih lanjut atas permintaan

Kondisi: baik (bekas), Tahun pembuatan: 1987, Manufacturer Model: PS 8100 Height: 2,200 mm Width: 1,200 mm Length: 1,625 mm Gtjdjk E Hh Sepfx Adtot Loading height: 1,900 mm Weight: 800 kilograms Rated current at 400 V: 4.8 A Transformer rated current at 230 V: 0.38 A Motor power: 2.2 kW Fuse: 10 A, slow-blow Rotation: 13 rpm Protection class: IP 54 Fire class: D, E Hydraulic oil: HLP 32 Bale weight (depending on material): 150-400 kg Bale volume: 1 m³

Tahun pembuatan: 2024, Kondisi: baru, We also offer leasing and financing options. Feel free to contact us! For all recycling needs, we have shredders and other recycling machinery in stock in Heilbronn! From copper recycling to plastic recycling, you can purchase all necessary machines from us. Just ask! With Josan & Sons Mechanical Engineering Profit from copper! ‼️We are happy to offer live demonstrations of the machines in Heilbronn! By appointment only!‼️ We are a German company based in Heilbronn, subject to German law, with warranty and service! We also speak English! We are happy to advise you on any recycling-related questions! Material separation solutions for the recycling sector! Simply ask. Electrostatic separator for separating plastic or synthetic materials from copper, iron, or other components. You can also separate plastic from metals in uPVC window frames. Separate plastics from sand or sort various plastics from each other. ➡️Motor: 6.59 kW ➡️Dimensions (LxWxH): 4000x1400x3000 mm ➡️Weight: approx. 1000 kg Godpfoqvmpfjx Adtett ➡️Capacity: 150-300 kg per hour Price on request! Errors excepted; images, prices, and equipment details may vary.