Mesin pengepakan bal

Presto GmbH & Co. KG HPK 50 B

Kondisi: bekas, Tahun pembuatan: 2007, jam operasional: 27.000 h, Fungsionalitas: berfungsi sepenuhnya, Dijual gunting scrap mobile dalam kondisi bekas. Mesin dapat dilihat kapan saja. Iodpfoykzv Hsx Afisia

Kondisi: baru, Tahun pembuatan: 2023, nomor mesin/kendaraan: 7YXXX, VIS G ist die ideale und effizienteste Lösung für die Schrottverarbeitung wie Stanzteile, Abschnitte und Drähte und wird vor allem für die Automobilindustrie, Metallrecycler sowie die Nichteisenmetall-Recycling- und Umschmelzindustrie empfohlen. Iisdpjmqi Akjfx Afisa

Kondisi: siap digunakan (bekas), Spesifikasi teknis mesin press Dixi 60 AUTOMAT Iisdpfx Afov Amw Nsiea Bukaan pemuatan (L x T): 1550 x 1000 mm Daya penggerak: 31,5 kW Gaya tekan: 60 t Berat bal (tergantung material): 350–600 kg Dimensi bal (L x T x D, dapat disesuaikan): 1100 x 800 x 300–1600 mm Waktu press/siklus: 13/24 dtk Berat mesin: 7000 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 37.656 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 85 t, lebar bukaan pengisian: 1.500 mm, panjang bukaan pengisian: 1.100 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 650 kg, berat keseluruhan: 25.000 kg, kapasitas tangki oli: 1.000 l, tahun perombakan terakhir: 2024, laju aliran volumetrik: 410 m³/jam, lebar transportasi: 2.400 mm, panjang transportasi: 9.300 mm, Good day, We hereby offer you, subject to prior sale, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We do not assume any liability for the accuracy and completeness of this information. Manufacturer: Presona AB, Sweden Iiodpfx Aev T I Evsfisa Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale size: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Baler dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Machine weight (press): approx. 25 t Note: The machine was used by a recycling company for compaction of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The baler is in good condition. Many wear parts and entire assemblies have already been renewed in the last 3 years. The machine has been regularly maintained. We would be pleased if this baler is of interest to you. Your Service Team, Mertens & Frowein GmbH

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 8.900 h, nomor mesin/kendaraan: LP50VH2, Used Presona LP50 VH2 baler in good working condition with conveyor belt Technical data: LP 50VH2 - Theoretical volume capacity: 730 m³/h - Maximum throughput under load: 340 m³/h - Productivity at bulk density: - 30 kg/m³ = 7–9 t/h - 50 kg/m³ = 8–9 t/h - 100 kg/m³ = 11–14 t/h - Hopper length: 1,500 mm - Hopper width: 1,100 mm - Loading chamber volume: 2.7 m³ - Bale width: 1,100 mm - Bale height: 720 mm - Bale length: adjustable - Bale weight: 400–550 kg - Number of vertical tying wires: 5 pcs - Press force: 50 t - Specific pressure: 63 N/cm² - Max. hydraulic pressure: 250 N/cm² - Oil tank volume: 600 l - Electric motor power 400 V, 50 Hz: 1 x 45 kW - Oil cooler: 1 x 1.5 kW - Net weight approx.: 16 t - Year of manufacture: 2014 2) Feed Conveyor - Conveyor type: Chain conveyor - Year of manufacture: 2014 - Specifications: - Conveyor width: approx. 1,300 mm Iedpfxeyrhi Nj Afioia - Length of horizontal section: 5,500 mm - Length of inclined section: approx. 10,800 mm - Conveyor weight: approx. 6 t Scope of delivery: Baler, control cabinet, operating panel, and conveyor belt for sale. Documentation (operating manual, CE declaration, electrical/hydraulic schematic) is complete. Inspection possible by appointment. We accept no liability for technical information or possible errors. Video footage can be provided upon request.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, jam operasional: 44.590 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 200 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 2.000 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, kapasitas tangki oli: 3.100 l, daya: 150 kW (203,94 hp), tahun perombakan terakhir: 2025, Technical Data Baler: Iijdpfx Afjx Dnb Ueisa Manufacturer: MACPRESSE EUROPA S.R.L. Model: 112 Year of Manufacture: 2002, partially overhauled in December 2025 Operating hours: 44,590 hours, as of December 2025 Main press force: 200 t Specific press force: 16.5 kg/cm² Feed hopper dimensions: 2,000 x 1,020 mm Feed volume: 2.65 m³ Theoretical throughput: 795 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 75 kW Tying: 5-fold horizontal, fully automatic Throughput (MSW): approx. 48 to 54 t/hour, depending on material Hydraulic oil tank volume: 3,100 L Machine weight (press): approx. 50.8 t Scope of delivery: 1 unit baler MACPRESSE, type 111A 1 unit operating manual with CE declaration, electrical and hydraulic diagrams Comments: The machine has been serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank drained and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Dismantled press ram, disassembled into individual parts, overhauled the mechanics • Replaced the front two main running rollers • Replaced the knives on the press ram • Main hydraulic cylinder dismantled and disassembled, checked cylinder tube and piston rod, replaced complete set of seals • Counter-blade in the frame replaced • Knife clearance adjusted to approx. 3 mm • Upper steel guide rails on the left and right in the frame replaced • Removed worn press floor, replaced base plate with wear-resistant HARDOX steel • Dismantled tying and twisting unit, disassembled, overhauled the mechanics, replaced all twisting shafts and ball bearings • Replaced all wire spools in the needle heads • Cleaned and readjusted wire cutters, lubricated and tensioned chains • All wire guide rollers refurbished • All door contact switches replaced • Vibulator dismantled, disassembled and serviced • General maintenance performed Finally, the baler was tested in both manual and automatic modes; see our video of the machine function test. Complete documentation is included (operating manual, CE declaration, electrical/hydraulic diagrams). Inspection is possible by appointment. We accept no liability for the technical data or possible errors.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, jam operasional: 34.480 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, berat bal: 750 kg, berat keseluruhan: 19.000 kg, tinggi transportasi: 3.300 mm, kapasitas tangki oli: 750 l, daya: 45 kW (61,18 hp), en_Bollegraaf_HBK100_techdata_2024-06-30 Iiedpfxjxbgnhe Afioa

Kondisi: bekas, Thread tap for pipe threads Roughing and finishing cutter Iijdpfodk Rdvex Afija R 2 3/4 inch

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, 3-axis machining center, CNC FANUC 18MC Includes: - High-pressure coolant through spindle - Hinged belt chip conveyor - Spindle chiller - Manuals - CE certificate TRAVELS X-axis (table longitudinal travel): 1020 mm Y-axis (table cross travel): 600 mm Z-axis (head vertical travel): 560 mm TABLE Distance table–spindle: 150 / 710 mm Table size: 635 × 1200 mm Max load capacity: 1,000 kg SPINDLE Table with T-slots: 6 × 18 mm, h8 T Max spindle speed: 10,000 rpm Speed ranges: 1 Max torque: 192 N·m Taper: No. 40 Bearing inner diameter: 70 mm FEEDS Rapid traverse: 32,000 mm/min Working feed: 1–20,000 mm/min Jog feed: 4,000 mm/min Thrust (X&Y / Z): 7,400 / 13,500 N ATC (AUTOMATIC TOOL CHANGER) Tool holder taper: ISO 40 [BT-40] Number of tools: 24 [32] Max tool diameter: 88 / 125 mm Max tool length: 300 mm Max tool weight: 7 kg Selection method: random Tool change time: 2.5 sec Chip-to-chip time: 6 sec MOTORS Iodpfx Ajxfguvsfijia Spindle drive: 15 / 11 kW Servo motors (X&Y / Z): 2.1 / 3.8 kW Coolant pump: 0.5 kW (nozzles) + 1.4 kW (wash) POWER SUPPLY Power rating: 30 kVA TANKS Lubricant: 4 l Coolant: 400 l DIMENSIONS Height: 2,825 mm Floor space: 2,650 × 2,200 mm Weight: 7,500 kg PLEASE NOTE: Machine only; vices and tools are not included in the sale.

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, En route Bale Press Presto HPK 50 HS, year of manufacture 2012, with perforator and inclined belt conveyor (sliding belt conveyor) Manufacturer: Presto Model: HPK 50 HS Year of manufacture: 2012 Drive power: 30 kW Pressing force: 50 t Feed opening: 1600 x 650 mm (LxW) Chamber cross-section: 700 x 950 mm Max. filling volume: 1.06 m³ Cycle time: 19 s Tying: 4-fold Throughput rate at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 10,500 kg Perforator, hydraulically movable Drive power 2 x 4 kW / 400 V Throughput: approx. 220 m³/h Clear feed opening: 1380 x 1200 mm Materials: Paper, Cardboard, Film, PET bottles Please note: All technical data refer to the manufacturer’s information. We accept no liability for the provided data or possible errors. The offer is subject to prior sale and change without notice. Iiodpeyma Rzsfx Afisa Inspection is possible by appointment. Sale against prepayment ex works, without warranty or guarantee.