Mesin pengepakan bal

Presto HPK 50 BS

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 8.900 h, nomor mesin/kendaraan: LP50VH2, Used Presona LP50 VH2 baler in good working condition with conveyor belt Technical data: LP 50VH2 - Theoretical volume capacity: 730 m³/h - Maximum throughput under load: 340 m³/h - Productivity at bulk density: - 30 kg/m³ = 7–9 t/h - 50 kg/m³ = 8–9 t/h - 100 kg/m³ = 11–14 t/h - Hopper length: 1,500 mm - Hopper width: 1,100 mm - Loading chamber volume: 2.7 m³ - Bale width: 1,100 mm - Bale height: 720 mm Hedpfxoyrhi Ne Al Isl - Bale length: adjustable - Bale weight: 400–550 kg - Number of vertical tying wires: 5 pcs - Press force: 50 t - Specific pressure: 63 N/cm² - Max. hydraulic pressure: 250 N/cm² - Oil tank volume: 600 l - Electric motor power 400 V, 50 Hz: 1 x 45 kW - Oil cooler: 1 x 1.5 kW - Net weight approx.: 16 t - Year of manufacture: 2014 2) Feed Conveyor - Conveyor type: Chain conveyor - Year of manufacture: 2014 - Specifications: - Conveyor width: approx. 1,300 mm - Length of horizontal section: 5,500 mm - Length of inclined section: approx. 10,800 mm - Conveyor weight: approx. 6 t Scope of delivery: Baler, control cabinet, operating panel, and conveyor belt for sale. Documentation (operating manual, CE declaration, electrical/hydraulic schematic) is complete. Inspection possible by appointment. We accept no liability for technical information or possible errors. Video footage can be provided upon request.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, jam operasional: 32.169 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 60 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.320 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, berat bal: 750 kg, berat keseluruhan: 22.000 kg, kapasitas tangki oli: 900 l, For sale is a complete baling plant consisting of conveying equipment, baler (partially overhauled and tested), and wire stations. Technical data for the baler: Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 60A Year of manufacture: 2000 Operating hours: 32,169 hours (as of November 2024) Main ram force: 60 t Pre-pressing force max.: 25 t Feed hopper dimensions: 1,320 x 1,100 mm Theoretical cycle time: 18 seconds Bale dimensions: 1,100 x 720 mm, length variable Drive power: 45 kW Total connected load: 60 kW Tying: 5-fold vertical Throughput rates: With bulk density of 30 kg/m³: approx. 5.5 t/h With bulk density of 50 kg/m³: approx. 10 t/h With bulk density of 100 kg/m³: approx. 16 t/h Bale weights: 400 up to 750 kg (depending on material) PLC control: Telemecanique TSX Micro Machine weight (baler): approx. 22 t Scope of delivery: 1 chain belt conveyor 1 Bollegraaf baler HBC 60A with wirbulator 1 maintenance platform with access ladder 2 wire stations with deflection pulleys for 10 wire spool racks (without wire) The following repair and overhaul works were performed: - Hydraulic oil tank fully drained, cleaned, and refilled with new oil - Oil filter and air filter replaced - Hydraulic block partly resealed - Hydraulic hose on hydraulic block replaced - Wire feed wear tracks at bottom passages welded and smoothed - Tying mechanism cleaned and serviced - Electrical system refurbished, some door switch contacts replaced Hjdpfx Aleviwdms Isl - Wirbulator repaired - General maintenance performed, lubricated - Machine tested in running mode, without material, in manual and automatic mode (see functional video) Remarks: The plant has already been fully dismantled, stored, and is available at short notice for loading. Documentation (operating manual, CE certificate, electrical/hydraulic circuit diagrams) is available. Inspection possible by appointment. We accept no liability for technical data or possible errors.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 20.331 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 970 mm, panjang bukaan pengisian: 1.800 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 750 kg, berat keseluruhan: 33.000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baling press from the manufacturer HSM, type VK 8818 R-FU incl. conveyor technology and wire tie stations. The following technical data have been taken from the manufacturer’s operating manual and brochures, for the accuracy and completeness of which we assume no liability. Technical specifications of the press: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Main press force: 1000 kN Specific press force: 120 N/cm² Cutting edge ejector press force: 121 kN Feed chute dimensions: 970 x 1,800 mm Theoretical cycle time in idle: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency controlled Connected load: 110 kW Total power consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput at a bulk density of: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg/bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC control: Siemens S7-300 Operator panel: Siemens TP 700 Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor system: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight of press: approx. 33 t (main press: approx. 12 t, press channel with bale clamp: approx. 10 t) Additionally ordered special equipment: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard drive (2 x 45 kW) with equal performance Manual enabling/disabling of the number of wire-tie circuits to save tying wire with non-expansive materials Cutting edge ejector with 121 kN press force Sensor-based wire monitoring, with press shut-off in case of wire break or end of wire Bale chute Visual warning signal mounted on the control cabinet Condition of the press: The complete press system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned weekly by the operator, greased and maintained in accordance with the manufacturer’s guidelines. Technical data for the chain belt conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feed belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Maintenance platform - Bale chute - Wire redirecting stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Transverse sliding belt conveyor - Pit cover from feed conveyor to pit - Second control cabinet for operating the press at the conveyor - Machine documentation in English Delivery time: The entire system is already dismantled, stored, and can be loaded at short notice after receipt of payment. We would be pleased if this or one of our other presses is of interest to you. Hsdpeyz Af Esfx Al Ijl Your Service Team, Mertens & Frowein GmbH

Kondisi: baik (bekas), Tahun pembuatan: 2011, jam operasional: 40.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 88 t, lebar bukaan pengisian: 990 mm, panjang bukaan pengisian: 1.800 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat keseluruhan: 23.000 kg, kapasitas tangki oli: 2.000 l, daya: 90 kW (122,37 hp), laju aliran volumetrik: 643 m³/jam, Good day, We hereby offer you, subject to prior sale, a used baler including conveyor belt, wire-tying stations, and bale slide from the manufacturer HSM GmbH + Co. KG, model VK 8818 FU. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we assume no liability for accuracy or completeness. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours (as of July 2025) Main press force: 880 kN Specific press force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Hjdpfxeymmtcj Al Ijl Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions incl. conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used in a recycling facility for compacting paper, cardboard, and film materials. The baler is in good condition and will be replaced by a new, larger press in May/June 2026. Until then, the machine can be inspected in operation with material processing. We would be pleased if this press is of interest to you. Your Service Team Mertens & Frowein GmbH

Kondisi: bekas, nomor mesin/kendaraan: 11403, Rotor knives: 2 x 7 stars Rotor width: 1200 mm Hjdeyx Nlyepfx Al Iol Rotor diameter: 350 mm Feed opening: 850 x 1200 mm Power: 30 kW

Kondisi: baik (bekas), Tahun pembuatan: 2005, jam operasional: 15.606 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, lebar bukaan pengisian: 1.050 mm, panjang bukaan pengisian: 1.250 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 700 mm, berat bal: 500 kg, daya: 30 kW (40,79 hp), laju aliran volumetrik: 160 m³/jam, Good day, We hereby offer you, without obligation, a used baling press from the manufacturer Presto GmbH & Co. KG, model HPK 50 B. The following technical data has been taken from the manufacturer's operating manual and brochures, for which we cannot guarantee accuracy or completeness. Manufacturer: Presto GmbH & Co. KG Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Main press force: 50 t Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Throughput under operating conditions with a bulk density of 60 kg/m³: approx. 6.7 t/hour Machine weight (press): 12.5 t Hodpfxjyplwfj Al Isl Note: The machine has been serviced in our workshop (main control valve on hydraulic block replaced) and tested in continuous operation, both in manual and automatic mode. The machine documentation is available in German. An inspection of the press is possible in our workshop by appointment. We would be pleased if this machine is of interest to you. Your service team Mertens & Frowein GmbH