Pusat pemrosesan jendela sudut

WEINIG Unicontrol 12

Kondisi: bekas, Tahun pembuatan: 2004, Slot spindle 2 pcs Number of milling units: 7 pcs Spindle diameter: 50 mm Control: CNC, Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial NC spindles and VARIO table ..... Machine has already been professionally dismantled and stored in 73447 Oberkochen Technical Data Summary (possibly included additional accessories available upon request) ..... Cross-cut saw ..... > Cross-cut saw, electronic, horizontally adjustable steplessly > Number of tools: 1 pc. > Spindle speed: 3,000–6,000 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser guide light for cut section identification > Axial adjustment range 150 mm, NC axis, electronically stepless > Radial adjustment range pneumatic, 8 positions, e.g. for top edge rounding Rounding Unit ..... > Position: horizontal, bottom > Axial adjustment together with the cross-cut saw. Electronic length stop ..... > Length: 4,500 mm 1st Tenoning and Slotting Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm, NC axis, stepless > Spindle speed: 2,800–4,000 rpm > Tool diameter: 380–400 mm > Synchronous counter pressure, full clamping length is countered 2nd Tenoning and Slotting Spindle ..... > Number of tools: variable > Motor power: 15 kW Dsdpoyrtzkofx Afteki > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm, NC axis, stepless > Spindle speed: 2,800–4,000 rpm > Tool diameter: 380–400 mm > Synchronous counter pressure, full clamping length is countered Transfer belt ..... For transfer of parts to longitudinal processing, including double part separation before infeed to the longitudinal machining section. 1st Profiling Spindle (Climb and Conventional Milling) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range: 350 mm, NC axis, stepless > Radial adjustment range: 80 mm, NC axis, stepless > Spindle speed: 6,000 rpm > Min. tool cutting diameter: 140 mm > Max. tool cutting diameter: 232 mm 2nd Profiling Spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range: 350 mm, NC axis, stepless > Radial adjustment range: 80 mm, NC axis, stepless > Spindle speed: 6,000 rpm > Min. tool cutting diameter: 140 mm > Max. tool cutting diameter: 232 mm 3rd Profile Milling Unit (Grooving device from above) ..... > Position: horizontal top > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range: 30 mm, NC axis, stepless > Radial adjustment range: 125 mm, NC axis, stepless > Spindle speed: ...

Tahun pembuatan: 1997, Kondisi: baik (bekas), • Working width (mm): 1300 • CSD system • Cross-belt sanding unit Dkodoidi Ivjpfx Aftji • Longitudinal sanding unit – shoe • Brushing unit • Ionization

Kondisi: bekas, Slot spindle 2 pcs. Number of milling units: 7 Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial NC spindles, as well as VARIO table and trimming carriage ..... Machine properly dismantled and stored at our warehouse in 73447 Oberkochen. Video and pictures were taken prior to disassembly. Technical Data Summary (Please inquire separately for any potentially included accessories) ..... Cross-cut saw ..... > Cross-cut saw, electronic, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser guide light for identifying cutting section > Axial adjustment travel: 150 mm, NC axis, electronically infinitely adjustable > Radial adjustment: pneumatic, 8 positions, e.g. for top edge rounding Rounding unit ..... > Position: horizontally bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment: mechanically linked with cross-cut saw. > Radial adjustment: pneumatically controlled On/Off electronic length stop ..... > Length: 4,500 mm 1st tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm, NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter hold, complete clamping length is counter-supported 2nd tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm, NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter hold, complete clamping length is counter-supported Transfer belt ..... For transfer of parts to longitudinal processing, Dkodpfjx H Al Njx Aftji including double-part separation before infeed to longitudinal processing. 1st profiling spindle (climb and conventional milling) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm, NC axis, infinitely adjustable > Radial adjustment travel: 80 mm, NC axis, infinitely adjustable > Spindle speed: 6,000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm > 2 feed rollers opposite to spindle, axially pneumatically controlled, 8 positions > Table plate pneumatically adjusted to tool diameter 2nd profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm, NC axis, infinitely adjustable > Radial adjustment travel: 80 mm, NC axis, infinitely adjustable > Spindle speed: 6,000 rpm ...

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Unicontrol 12 Consisting of: Cross-cutting unit (Pos. A), Tenoning and slotting spindle (Pos. C), Transfer conveyor (Pos. I), Profiling spindle (Pos. L), Profiling spindle (Pos. N), Vertical profiling mill right (Pos. P) For the production of individual parts and components, either frame-based or in series production. Comprises a cross machining unit and a longitudinal machining unit connected by a transfer conveyor. Working width: 40-140 mm (see pressure fence left 40 - 140 mm) Working height: 40-120 mm Workpiece length min.: approx. 275 mm + 1 x end profile length Longitudinal machining: approx. 220 mm + 2 x end profile length Max. workpiece length: 3500 mm The dimensions of the parts depend on the machine configuration, type of production, and tooling setup. Final definition of part dimensions is only possible after receipt, review, and approval of the complete and final tooling layout drawings. Cross machining: Table feed motor power: 0.3 kW (0.4 HP) Feed speed when sawing, profiling, and in return preset: 3-25 m/min Vario table with (possible for studio/architectural window production) The clamping length of all tenoning and slotting spindles can be used without tool change gaps. Dedoumci Sjpfx Aftoki Workpiece clamping by means of clamping bridge. Operated via a clamping cylinder installed under the table. Length stop NC controlled, mounted on the slotting table. Studio window device swivel angle max.: +/- 75° Minimum workpiece length for angled windows depends on the angle and timber width. Possible part dimensions for angled window production: Angle Max. Min. Working width Workpiece length +/-75° 80 mm 800 mm +/-70° 120 mm 490 mm +/-60° 240 mm 360 mm +/-90° 350 mm 185 mm For angles greater than 60°, only counter processing Commission not documented 1) NC angle adjustment automatic for angled part machining Tear-out protection via follow-up counter along the entire spindle length of the tenoning and slotting spindle for 90° machining. Manually trackable counter-timber strip for angled part machining. 2) Additional counter timbers

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Ficep 1201 DE 601 Excalibur drilling machine for processing flat steel and profiles, equipped with a drilling unit that moves longitudinally. This machine has been completely cleaned and inspected. The drilling machine features a numerically controlled drilling unit that moves in the longitudinal direction (X-axis), with an adjustment range of 0 - 15,000 mm, and an automatic tool changer with HSK A80 holder for 6 tool positions. Thanks to the 19 kW drill spindle drive, the machine is suitable for use with carbide drilling tools. Technical details: - Profiled and flat steel support with guide rail and fixed table, total length 15 m - Mobile drilling unit for longitudinal positioning along the workpieces - Horizontal drill head with single spindle - Additional drill head storage in X-axis direction - Clamping device for securing material - Position detection device - Maximum profile size: 1200 x 1200 mm - Number of drill spindles: 1 pc Dsdsv Iamzjpfx Aftski - Drilling diameter: 5 - 40 mm - Thread cutting: M6 - M30 - Spindle speed: 180 - 3000 rpm - Holder: HSK A80 - Tool changer: 1 x 6 For more information, please contact us.

Kondisi: baik (bekas), Tahun pembuatan: 2002, jam operasional: 5.900 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 74343, lebar kerja: 1.350 mm, panjang sabuk penggiling: 2.620 mm, lebar sabuk penghalus: 1.370 mm, Mesin Amplas Pita Lebar Bütfering Optimat SBC 313 Tahun pembuatan: 2002 Model: Optimat SBC 313/QCE/Classic - dengan 3 unit (deskripsi terlampir pada foto) - pengamplasan dari atas Djdpjqvl D Hefx Aftoki Lebar kerja: 1350 mm Lebar sabuk amplas: 1370 mm Panjang sabuk amplas: 2620 mm Lebar sabuk amplas melintang: 150 mm Panjang sabuk amplas melintang: 4700 mm Informasi lebih detail tersedia pada foto.

Kondisi: bekas, Tahun pembuatan: 1999, tinggi total: 2.000 mm, panjang total: 3.000 mm, lebar total: 1.800 mm, de-hu-001 Dedpfxowqf I Uo Aftski

Kondisi: baru, Tahun pembuatan: 2025, Rollformmaschine für Metallsiding "Doppel-Fassadenpaneel" SPM-2 Die Rollformmaschine für Metallsiding "Doppel-Fassadenpaneel" SPM-2 ist eine Neuentwicklung unseres Unternehmens zur Herstellung von Fassaden- und Wandpaneelen aus Metall mit der jeweils erforderlichen Konfiguration. Diese Doppel-Fassadenpaneele sind im Bauwesen äußerst beliebt und werden zur Verkleidung von Wohngebäuden und Industrieanlagen, für die Errichtung von Zäunen in verschiedenen Ausführungen, Pavillons, Dachelementen usw. eingesetzt. Die Metallsiding-Produktionslinie SPM-2 ist vollautomatisch und besteht aus einem Rollenteil, einer Automatisierungseinheit und einer Guillotine-Schere am Ausgang der Maschine. Je nach Kundenwunsch kann die Linie um einen manuellen oder automatischen Abwickler für Metallcoils erweitert werden. In der Standardausführung produziert die Rollformmaschine SPM-2 flache Doppel-Fassadenpaneele, optional können durch Zusatzgeräte jedoch auch Paneele mit Mikroprofilierung oder Sickenprofil hergestellt werden. Für den Produktionsstart wird ein Metallcoil auf den Abwickler gesetzt und das Bandende in die ersten Umformwalzen der Maschine eingeführt. Schrittweise wird das Metall durch die weiteren Walzen geführt und bei Bedarf ausgerichtet. Dksdpfxsxghngj Aftei Sobald das Metall zum Schneidwerkzeug gelangt, wird das Band in die Messereinheit eingeführt und ein "Nullschnitt" durchgeführt. Anschließend kann die Maschine in den Automatikbetrieb wechseln. Über das Bedienfeld lassen sich Auftragsmengen, Produktlängen (Einzelbearbeitung oder Mehrfach-Modi) einstellen. Nach Einstellung der gewünschten Parameter fertigt die Maschine die Wandverkleidungspaneele automatisch und schneidet sie direkt auf Maß. So erhält der Kunde die Endprodukte schnell und in höchster Qualität. Die Rollformgeschwindigkeit ist variabel und beträgt bis zu 10-15 Meter pro Minute. Die SPM-2 Produktionslinie für Metallverkleidungspaneele verfügt über spezielle Stanzvorrichtungen für Befestigungslöcher an der Paneelseite. Somit kann der Kunde ein breiteres und attraktiveres Produktportfolio anbieten. Der Rollenteil der Maschine umfasst 18 Walzenpaare, die höchste Produktqualität gewährleisten. Die Maschine ist wahlweise mit oder ohne Schutzverkleidung lieferbar. Technische Daten: Materialbreite (mm): 416 Materialstärke (mm): 0,4-0,5 Motorleistung (kW): 3 + 1,1 Rollformgeschwindigkeit (m/min): 10-15

Kondisi: baru, Tahun pembuatan: 2025, de Dkodpfxshtyuts Aftei

Kondisi: bekas, TECHNICAL SPECIFICATIONS - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Maximum bar diameter: 16 mm - Spindle speed: 12,000 rpm - Minimum C-axis increment: 1° SUB SPINDLE - Maximum bar diameter: 16 mm - Spindle speed: 8,000 rpm TOOL HOLDER 1 - Number of positions: 9 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm Dkjdou Elkqspfx Aftji FRONT TOOL POST - Number of positions: 3 SYNCHRONOUS OPPOSING MACHINING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Total operating hours: 73,252 h - Spindle hours: 50,900 h EQUIPMENT - CNC control: Fanuc 18iT - Driven guide bushing - Parts catcher - Parts conveyor - Parts ejector - Coolant tank - Bar feeder: IEMCA CH 220/32L - Fire suppression system * Note: Functionality not guaranteed. Inspection by a qualified company on the buyer’s side is recommended. - Electrical transformer - Number of driven tool holders: 3