Beli Mesin frais alat universal konvensional, langkah sumbu X 0–399 mm bekas (128)

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Nomor Artikel Internal: 26054 Mesin frais universal Deckel FP1 + Tampilan digital Heidenhain Rentang pergerakan: X300 / Y160 / Z340 mm Langkah spindel: 60mm Daya: 1,9KW Jumlah kecepatan spindel: 16 Rentang kecepatan: 40-2000 RPM Pemasangan alat: SK40 Bwjdpozx T Agefx Abvju Mesin ini berasal dari sebuah lembaga pendidikan dan dalam kondisi terawat dengan baik. Anda dipersilakan untuk memeriksa mesin saat beroperasi di gudang berukuran lebih dari 500m² yang dilengkapi dengan pemanas.

Kondisi: bekas, Mesin Kopi-Frais DECKEL Tipe: KF 1 Bodpfx Ajz A Hmwebvswu No. Mesin: 61510 Tahun Pembuatan: 1981 Berat sekitar: 1 ton

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2201-5046, Kondisi baik dengan berbagai dudukan alat. Bwjdpey Al Tnjfx Abvou SK40 - S20 Kontrol aktif Heidenhain Feeder otomatis di semua sumbu. Sumbu ke-4 terkontrol.

Kondisi: bekas, Mesin frais Deckel FP1 Lokasi: Bad Tölz Kami menyambut baik kunjungan untuk pemeriksaan. Bwodpfx Abjzv Sm Sjvou Kami juga memiliki mesin bekas lainnya. Silakan hubungi kami.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP3 with 3-axis Heidenhain TNC 113 digital readout and infinitely variable feed – Excellent condition Technical data: >> Year of manufacture: 1983 Machine No.: 2201-5919 >> Rigid angle table (refurbished) >> Spindle speed: 25 - 2,500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on all 3 axes >> Drive power: 2.0 / 4.0 kW >> Spindle brake Bwsdpfx Aey D Tl Iebvou >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head adjustable on spindle carrier: 200 mm >> Vertical and horizontal quill, ISO 40 taper, extensible >> Drawbar system S20 x 2 >> Weight approx. 1,500 kg Equipment and accessories: >> 3-axis active digital readout, Heidenhain TNC113 >> Coolant system >> Automatic central lubrication About the machine: Offered here is a Deckel FP3 universal milling machine in very good condition. The machine has minimal backlash on the cranks and all slides move smoothly. On this newer FP3 model, feed rate is steplessly adjustable on all three axes; in addition, each axis features rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain positioning control you can enter target dimensions which the machine automatically moves to. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test this machine under power on site. The machine is available immediately.

Kondisi: baik (bekas), Tahun pembuatan: 1980, Deckel FP1 Aktiv milling machine with 3-axis Heidenhain digital readout, tilting table. SK40 spindle taper. Good, operational condition, can be demonstrated under power by arrangement. Bwodjwg S I Topfx Abveu

Kondisi: baik (bekas), Tahun pembuatan: 1985, Deckel FP1 Aktiv dengan tampilan digital Heidenhain 3 sumbu, 3 sumbu aktif, meja tetap, dudukan spindle SK 40 M16. Pelumasan sentral, buku petunjuk penggunaan. Kondisi sangat baik, siap pakai, berasal dari pusat pelatihan kejuruan. Dapat didemonstrasikan dalam keadaan terhubung listrik sesuai kesepakatan. Bjdpfsxwunzox Abvjwu

Kondisi: baik (bekas), Tahun pembuatan: 1990, Deckel FP 4 MK Tool Milling Machine Deckel FP 4 MK with Heidenhain TNC 113 Control, Year of Manufacture 1990, Fully Refurbished in 2014, Excellent Condition, CE-Compliant!! The machine comes from Continental’s training workshop. Bjdpfx Ajyalcpsbvjwu Technical Data: Year of manufacture: 1990 Fully refurbished: 2014 Digital Readout: 3-axis active digital display HEIDENHAIN TNC 113 Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Tool holder: SK 40 hydraulic tool clamping DIN 2080 Milling head type: Vertical milling head Spindle speed range: 50 - 2,500 rpm, 18 steps Table type: Swivel table Clamping surface: 800 x 490 mm T-slot size: 14 mm Weight: approx. 1,450 kg Dimensions: approx. 2,500 x 2,700 x 2,100 mm Accessories and Equipment: - Heidenhain TNC 113 control - Hydraulic clamping for vertical and horizontal operations - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual, and programming examples - Handwheels - Coolant system About the Machine: Offered here is a Deckel FP 4 MK tool milling machine equipped with a Heidenhain TNC 113 control. This universal milling machine is in very good original condition. It comes from a facility where it saw very little use, primarily for training purposes. The machine features a user-friendly control system. Additionally, it offers hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is straightforward, simply by swiveling the vertical head aside. The guideways are regularly lubricated via the central lubrication system. The Deckel has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the Deckel under power at our facility. You can find further milling machines from renowned manufacturers on our website.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Jarak gerakan sumbu X: 300 mm Bwedpfx Aozi Utbobvju Jarak gerakan sumbu Y: 150 mm Jarak gerakan sumbu Z: 340 mm Kecepatan putar: 40 – 2000 RPM Kecepatan umpan pada sumbu X & Z Pemasangan alat: SK 40 dengan ulir gergaji S 20 x 2 Jenis meja: Meja sudut atau meja putar Luas permukaan penjepitan meja: 600 x 210 mm Berat: 800 kg Dimensi: sekitar 1250 x 1200 x 1850 mm Lapisan cat: RAL6011 Hijau Reseda Tampilan digital: Tampilan digital 3 sumbu HEIDENHAIN Aksesori: Aksesori tambahan tersedia berdasarkan permintaan.

Kondisi: baik (bekas), Tahun pembuatan: 1980, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, 2 active axes, fixed table, SK 40 S20x2 spindle taper. Good, operational condition; can be demonstrated under power by prior arrangement. Bodpfx Aboumcmqevjwu

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 300 mm, jarak gerak sumbu Z: 400 mm, berat keseluruhan: 1.800 kg, MESIN FRAIS DECKEL FP3 L Rentang pergerakan sumbu X: 800 mm Rentang pergerakan sumbu Y: 300 mm Rentang pergerakan kolom: 200 mm Rentang pergerakan sumbu Z: 400 mm Kecepatan spindel: 25 - 2.000 putaran/menit Daya motor: 4 kW Bwsdpfxsz Ak Axs Abvsu Kecepatan makan: 5 - 500 mm/menit Kecepatan makan cepat: 1,5 m/menit Meja kerja: 1.000 x 700 mm Pemasangan perkakas: SK40 Berat: 1,8 ton Sistem optik Heidenhain

Kondisi: sangat baik (bekas), Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed – Excellent CONDITION Technical data: >> Year of manufacture: 1984 Machine No. 2102-2601 >> Swivel-tilting rotary table >> Spindle speed: 40 - 2000 rpm >> Stepless feed on 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be displaced on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and equipment: Dpbyzb >> 3-axis digital readout Heidenhain TNC113 >> Coolant system Bwedpfx Aju Racrobvou >> Operating manual, spare parts list About the machine: Offered here is a Universal Milling Machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, the feed in all three axes is steplessly adjustable, and the machine also features rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position control, you can input measurements, and the machine will automatically move to the set positions. The FP1 was located in a training workshop, where it was only occasionally used. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Kondisi: siap digunakan (bekas), Mesin frais perkakas Deckel FP 2 / Tampilan digital 3 sumbu "BARU"/KONDISI ASLI dari Universitas Bjdpfxeztdl Is Abvowu -Rentang pergerakan X/Y/Z 400x200x400mm -Luas permukaan meja 700x350mm -Rentang kecepatan 40-2000 RPM -Pengumpanan & gerakan cepat di ketiga sumbu -Pemasangan perkakas ISO 40 -Peralatan frais vertikal / horizontal -Meja sudut tetap -Peralatan pendingin -Tampilan digital 3 sumbu "BARU" -Mur spindel sumbu X "BARU" -Kaki mesin -Dokumentasi Dimensi: PxLxT 1,5x1,7x1,8 meter / Berat 1600Kg Kesalahan dan kekeliruan dicadangkan.

Kondisi: bekas, Mesin frais universal Emco F3 dari bengkel pelatihan Dilengkapi dengan indikator digital sumbu Dilengkapi dengan aksesori seperti yang ditunjukkan dalam gambar Sumbu X: 350 mm Sumbu Y: 300 mm Sumbu Z: 200 mm Meja: 600 x 200 mm Kecepatan cepat sumbu X, Y: 1200 mm/menit Rentang kecepatan putar: 80 – 2200 (8) RPM Langkah spindel: 45 mm #8498 Harga bersih Bjdpfxjztwgfe Abvswu

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1, repowered by FPS, year of manufacture 2010, with 3-axis digital display Heidenhain ND 780. As new condition! Technical details: >> Machine No. 55249/08, year 2010 Bsdpfx Asxu Hbhebvjwu >> Fixed-angle table >> Spindle speed: 40 - 2000 rpm >> Feed: 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar: S20x2 >> Weight approx. 700 kg Equipment and accessories: >> 3-axis digital display Heidenhain ND 780 >> Hydraulic machine vise >> Collets >> Tool holders >> Cutters >> Operating manual >> Coolant system About the machine: For sale is a universal milling machine Deckel FP1 repowered by FPS, in like-new condition. The package includes a hydraulic vise with swivel base, collets, tool holders, and cutters. Mechanically and electrically inspected. The Heidenhain digital readout simplifies and improves accuracy of operation. You are welcome to inspect and test the Deckel under power at our location. The machine is immediately available.

Kondisi: bekas, Tahun pembuatan: 1987, MESIN FRAIS PRESISI FRIEDRICH DECKEL Bwjdjzv Eg Sjpfx Abveu MODEL: FP4M TAHUN: Sekitar 1987 SISTEM PEMBACAAN DIGITAL HEIDENHAIN BERSIH

Kondisi: baik (bekas), Tahun pembuatan: 1988, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, rigid table, SK 40 tool holder, S20x2 spindle mounting. Good operational condition, can be demonstrated under power by prior arrangement. Bsdpfork Aaajx Abvjwu

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed Excellent Condition Technical Data: >> Year of Manufacture: 1992 Machine No.: 2102-6289 >> Fixed angle table (freshly planed) >> Speed range: 40 - 2000 rpm Bwodpju T D Nrsfx Abvju >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300 / 160 / 340 mm >> Vertical milling head on spindle carrier adjustable by 100mm >> Vertical and horizontal quill - ISO 40 taper (SK40) >> Drawbar system: S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis Heidenhain TNC 113 digital readout >> Coolant device >> Operating manual, spare parts list About the machine: For sale is a universal milling machine Deckel FP1, year 1992, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, feed can be infinitely adjusted on all three axes; rapid traverse is also available on these axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions that the machine will automatically approach. The FP1 was previously in a training workshop, where it was only used occasionally. Oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes work easier and even more precise. Take the opportunity to view and test the machine under power on site.

Tahun pembuatan: 1987, Kondisi: baik (bekas), Mikron WF2SA tool milling machine with 3-axis Heidenhain Aktiv digital readout. Fixed angle table, SK 40 spindle taper. Operational condition. The machine can be demonstrated under power by arrangement. Bodpfx Aboqttt Tsvewu

Kondisi: bekas, Mesin Frais Universal DECKEL FP1 Bedpfx Aozy Rfhjbvjwu Perjalanan X: 300 mm Perjalanan Y: 150 mm Perjalanan Z: 300 mm Spindel horizontal dan vertikal Kepala CM4 DECKEL Kecepatan spindle: 40 sampai 2000 RPM Kepala dapat dimiringkan secara horizontal Motor spindle: 2 kecepatan Daya motor: 1,5 kW Feed: X - Z otomatis / Y manual Dipasok tanpa meja, hanya dengan satu chuck konsentris 4 rahang Ø 140 mm Tegangan: 380 V Lebar: 1200 mm Kedalaman: 1200 mm Tinggi total: 1600 mm Berat: ±900 KG

Kondisi: bekas, deckel-fp1-en Bwedpfx Aozy Rfujbveu

Kondisi: baik (bekas), Tahun pembuatan: 1989, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, fixed table, SK 40 spindle taper with M16 drawbar. Good, operational condition; can be demonstrated under power by prior arrangement. Bedpfx Abjtp Nyfsvewu

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Mesin pengasah alat 5 sumbu dalam kondisi sangat baik, dijual karena tidak terpakai! Bwodpfx Absxw Sxksveu

Kondisi: baik (bekas), Tahun pembuatan: 1981, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, 2 active axes, fixed table, SK 40 S20x2 spindle taper. Good, operational condition; can be demonstrated under power by prior arrangement. Bedpfxsuvgnqj Abvowu

Kondisi: siap digunakan (bekas), Deckel FP 1 Milling Machine Travel X-axis: 300mm Travel Y-axis: 160mm Travel Z-axis: 340mm Spindle mount: SK 40 with drawbar thread X-axis feed: 290mm Weight: approx. 940 kg (including pallet) Space requirements: 1300mm x 1200mm x 1800mm (L x W x H) Dimensions with pallet: 1400mm x 1400mm x 2000mm (L x W x H) You are welcome to arrange an on-site inspection. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop to see more of our offers. Stated company names and trademarks are property of their respective owners and are used for identification and descriptive purposes only. Bwedouvih Hspfx Abveu Technical data deviations and errors in the item description may occur and are subject to change.