Beli Bandsaw horizontal – manual – area pemotongan bulat 221–299 mm bekas (85)

Kondisi: baru, Tahun pembuatan: 2022, SPECIAL PRICE, in-stock machine, year of manufacture 2022, condition: new List price: €4,200 IN-STOCK MACHINE -- The ARG 235 plus is a manual metal band saw offering high cutting precision. This machine allows for infinitely variable mitre cuts from -45° to +30° (swivel range 45° to the left, 60° to the right). Technical data: ● Cutting capacity: - 90° round: 235 mm / square: 230 mm / rectangular: 280 x 180 mm - 45° right, round: 165 mm / square: 145 mm / rectangular: 185 x 180 mm - 30° right, round: 115 mm / square: 80 mm / rectangular: 115 x 80 mm - 45° left, round: 185 mm / square: 160 mm / rectangular: 185 x 100 mm ● Saw blade drive power: 0.9/1.4 kW / 400 V / 50 Hz ● Band speed: 40 and 80 m/min ● Saw band: 2710 x 27 x 0.9 mm Standard features: ● Powerful belt drive ● Infinitely variable adjustment of cutting feed rate from the control panel ● Manual workpiece clamping, vice adjustable via dovetail guide ● Simple setting of the saw for mitre cuts by rotating the saw frame (stops at 45°, 60° and 90°) ● 250 mm material stop without scale Codpemftv Rjfx Aaroaa --> Also available in various sizes and configurations!

Kondisi: baru, Band saw with gravitational descent MACC SPECIAL 411 CSO New CE compliant The machine’s fundamental features (blade support rigidity, flywheel sizing, blade guides, and blade tensioning) have been thoroughly engineered to prevent blade fatigue, extend blade life, improve cutting straightness, and reduce cutting time. – Bandsaw with gravity-fed arc descent controlled by a hydraulic circuit, manual bar feed and vise clamping, manual head return – Vertical rotation on an adjustable conical bearing pivot, zero backlash – Blade drive with two-speed motor and special gearbox featuring a bronze gear and hardened, ground worm screw – Properly dimensioned flywheels – Robust blade guides with sealed guide bearings and adjustable carbide inserts – Blade tension achieved via electromechanical device with microswitch blade rotation control – Vise with rapid approach device – Safety devices on flywheel housing, control knob, and blade Cedpfx Aoficb Toarsaa – Hydraulic cylinder for controlled descent – Cutting thickness: 1.2 mm – Cutting range: 45° left / 60° right – Adjustable stop for repeat cutting to the same length – 24V low voltage electrical system – 0.06 kW electric pump for blade cooling – Pedestal with chip collection drawer and removable coolant tank – Machine prepared for handling with pallet truck

Kondisi: baru, Cutting diameter: 260 mm Saw band length: 2,455 mm Max. cutting width: 260 x 200 mm Saw band dimensions: 2,455 x 27 x 0.9 mm Mitre range: 0 – 60° Drive power: 0.75 / 1.1 kW Cutting speed: 34 / 68 m/min Table height above floor: 900 mm Machine weight approx.: 220 kg Required space approx.: 1.45 x 0.72 x 1.05 m NEW MACHINE PRICE: 1,990.00 EUR + VAT - Automatic lowering with control valve - Quick-release vice - Quick-action mitre clamp - Mitre angle scale - Oil bath for continuous lubrication - Cooling system with electric pump - Saw band wheels with precision bearings - Saw band tracking adjustment - Saw band tensioner with disc spring assembly - Saw blade monitoring safety cut-out (SBÜ) - Adjustable saw band guide at the front - Adjustable tension bearings front/rear - Swarf brush - AutoOFF automatic shut-off - Saw frame with tapered roller bearings - Sheet steel base with chip tray Cajdpfxowc D Azo Aarja

Kondisi: baru, MEP SHARK 281 CCS metal band saw with semi-automatic lowering. Article number: SH281CCS Motor power 1.5/1.8 kW Vice opening 285 mm Blade dimensions 2950x27x0.9 mm Weight 375 kg Band speed 36/72 m/min Cutting capacity at 0° 250 / 230x230 / 280x200 mm Cutting capacity at 45° right 190 / 180x180 / 180x180 mm Cutting capacity at 45° left - Cutting capacity at 60° right - Cutting capacity at 60° left - Description: - Saw bow, vice assembly, and base made of high-strength cast iron - Precision angle marking on the cast iron frame - Electrical system (with fully identifiable wiring and 24V low-voltage system) - IP 55 control handle for manual cycles (if applicable) - Rotating chip brush for the saw blade - Quick-approach vice closure system - Precise stops with angle cutting adjustment at 0°, 45°, 60° left - Bi-metal saw blade 2950 x 27 x 0.9 mm - Tools, instructions for use, and spare parts ordering guide in the user's language - SHARK 281 with manual operation and SHARK 281 CCS with manual operation and automatic feed cut via gravity. - CCS (Cut Control System) with (A: switch for manual and automatic cut – B: adjustable cutting speed – C: hydraulic brake with reservoir – D: end stop for band shutoff), also available as an option for machines already in service. - Quick-adjust vice - Hydraulic transducer for displaying blade tension - Electric coolant pump for blade cooling and lubrication, with accessible coolant tray above the machine base - For models with pneumatic vice (MA), opening and closing is via manual valve (optional foot pedal available) MEP SHARK 281 SXI evo [Semi-automatic] Article number SH281SXI Motor power 1.5/1.8 kW Vice opening 285 mm Blade dimensions 2950x27x0.9 mm Caedpfocgbp Iex Aarea Weight 435 kg Band speed 36/72 m/min Cutting capacity at 0° 250 / 230x230 / 280x200 mm Cutting capacity at 45° right 190 / 180x180 / 180x180 mm Cutting capacity at 45° left - Cutting capacity at 60° right - Cutting capacity at 60° left - Description Semi-automatic function: Vice closes and motor starts, saw head descends for the cut, motor shuts off, saw head raises, vice opens. Features include: - New centralized control console on articulated arm. - Latest-generation hydraulic control unit: highly efficient and low energy consumption. - Base with removable coolant tank. Machine in full compliance with all CE regulations! For further technical data, please refer to the attached PDF document.

Kondisi: baru, Tahun pembuatan: 2025, Cutting diameter: 240 mm Saw blade length: 2910 x 27 x 0.9 mm Cutting width: 310 mm Table height: 900 mm Cutting speed: 35 + 75 m/min Total power requirement: 1.1 / 1.8 kW Machine weight: approx. 470 kg Codpfxjwa Ui Te Aarjaa Space requirement: approx. 800 x 1720 x 1450 mm Standard equipment of the MEBAbase 24 DG-HS: - MEBA mitering system: Large, swiveling table prevents the saw blade from cutting into the material support surface – resulting in low wear costs! The material is always clamped square to the saw blade. - Manual miter adjustment from 90° to 30°, stepless via scale with 1.0° accuracy - The miter pivot point is at the intersection between the saw blade and material support, therefore there is no change in length measurement when the angle changes - End stops at 30° - 45° - 90° - 45° - Hydraulic material clamping. The material is clamped parallel at 90° in any saw frame angle - Centralized machine operation - Cutting pressure reduction via the self-weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section using a hydraulic damping cylinder and weight compensation spring - Saw blade drive with end stop - Stepless vise jaw adjustment - Adjustable movable blade guide arm for material width - Saw blade deflection pulleys with carbide guide - Practical chip collection tray with drip screen - Integrated chip cleaning brush - Mechanical saw blade tensioning - Operating instructions and spare parts list (digital) - 1 MEBA bimetal saw blade 4/6 TPI mounted on the machine - Complete coolant system - Paint finish anthracite (RAL 7016)

Kondisi: baru, Tahun pembuatan: 2022, Cutting diameter 230 mm Saw band length 2730 mm Cutting width 320 mm Round material 230 mm Flat material 320 x 130 mm - New machine - - Double mitre saw - (Item no. 105126) Cajdpfxswp Tmij Aarja * For more information regarding the exact standard configuration and available options, please visit our website or contact us directly *

Kondisi: baru, Tahun pembuatan: 2025, PREMIUM LINE Series Machine. Cormak S200R Manual Bandsaw designed for industrial applications. This metal-cutting bandsaw offers high cutting accuracy, thanks to a robust cast iron rotary table synchronized with the swiveling arm. This bandsaw is suitable for large industrial plants, capable of operating for up to 16 hours out of 24. It allows miter cutting from -45º left up to 60º right. Machine Features The CORMAK S-200 R MANUAL bandsaw, CE-certified, enables perpendicular cuts to the axis of the workpiece or mitre cuts at any angle from -45 to +60 degrees. The material can be fed manually or with any type of feeding device. During cutting, the arm descends gravitation-ally via oil flow in a dual-chamber hydraulic cylinder. The descent speed is regulated by a valve that controls oil flow between chambers. The operator starts the machine by pressing the start button and sets the cutting speed. After the cut is completed, the machine stops automatically and the operator manually raises the arm to the start position. Material feeding is manual. The vise is mounted on an adjustable bed and features a quick-clamping system. The blade guides use carbide inserts and rolling bearings. These CARBIDE INSERT GUIDES are key for precision and straightness of the cut. The arm is equipped with an automatic blade tension sensor and is inclined at 25 degrees, which increases blade life. A cleaning brush is mounted at the bottom of the arm for optimal blade performance and cleanliness. The machine drive transmits via an oil-filled worm gearbox. It is powered by a three-phase dual-winding motor with two cutting speeds. Casdpfjfy Ttijx Aarja Motor thermal protection. The machine provides two blade speeds: 35 and 70 m/min. Construction: the arm, vise, and rotary table are all cast iron components. Closed-loop coolant system. The machine is equipped with a length stop with a ruler for setting the cut length. The machine base is a rigid steel box section housing the coolant reservoir and coolant pump. Cutting safety is ensured by an electrical system that meets all CE requirements. The machine features a limit switch that stops the machine after the cutting process, an emergency stop ("mushroom"), and several micro-switches that shut down the machine if, for example, the belt guard or blade guard is opened. Technical Data TYPE: Gravity ARM LIFTING/DESCENDING: gravity with smooth descent adjustment BLADE SPEED: 36/70 m/min MITER CUTTING: 45° left to 60° right VISE: manual MINIMUM CUTTING DIAMETER: Ø 5 mm MINIMUM MATERIAL LENGTH IN VISE: 30 mm VISE BED HEIGHT: 890 mm BLADE: 27x0.9x2910 mm TOTAL POWER: 2.1 kW DIMENSIONS (LxWxH): 1600 x 800 x 1400 mm WEIGHT: 500 kg Max. Cutting Capacity [mm] Angle 0º ø250 320 x 240 240 x 240 45º L ø200 220 x 120 190 x 190 45º R ø220 235 x 120 210 x 210 60º R ø110 155 x 110 100 x 100 For more information, we invite you to visit our website.

Kondisi: baru, Brand new from factory No. 1 available for immediate delivery! “CE” Warranty Made in Italy Cutting Capacity: 0° = round tube 230 mm – square 220 mm – rectangle 170 x 300 mm 45° = round tube 200 mm – square 180 mm – rectangle 180 x 230 mm 60° = round tube 130 mm – square 120 mm – rectangle 110 x 130 mm TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on pivot with play-free, adjustable tapered roller bearings. Caedpsfibfgefx Aaroa Blade drive with two-speed motor and special gearbox featuring bronze gear and hardened, ground worm screw. Properly dimensioned flywheels. Heavy-duty blade guides with sealed guide bearings and adjustable carbide inserts. Blade tensioning system using electromechanical device controlled by blade rotation micro-switch. Vice with quick-release locking device. Safety devices on flywheel guard, control handle, and blade. Cut thickness: 1.2 mm Cutting range: 0 to 60° right Adjustable stop for repetitive cuts Low voltage system: 24 V Coolant electropump: 0.06 kW for blade cooling The key features of the machine (blade support rigidity, flywheel sizing, blade guides, and tensioning system) have been thoroughly engineered to avoid blade fatigue, extend blade life, improve cut straightness and reduce cutting time.

Kondisi: baru, Cutting diameter: 225 mm Saw band length: 2480 mm Maximum cutting width: 245 x 150 mm Voltage: 230 V Drive power: 1.5 kW Saw band dimensions: 2480 x 27 x 0.9 mm Mitre cuts: 0 - 60° Cutting speed: 20 - 90 m/min Codpfx Aasnlbmzorjaa Machine weight: approx. 185 kg Space requirement: approx. 1.4 x 0.69 x 1.7 m NEW MACHINE PRICE: 2,459.00 EUR + VAT - Infinitely variable speed - Infinitely adjustable feed - Mitre cut - Bi-metal saw band - Material stop - Machine base - Coolant system

Kondisi: baru, OPTIsaw S 275NV Swivel Frame Metal Band Saw Description -Metal band saws with a swiveling saw bow. The S 275NV features a continuously variable saw band speed -Quiet operation -Robust cast construction -High cutting accuracy due to vibration-free running Casdpfxedc H Sis Aarja -Lowering of the saw bow via hydraulic cylinder with throttle valve, continuously adjustable -Microswitch for automatic end shutoff -Coolant system -Equipped as standard with a high-quality bi-metal saw blade -Adjustable material stop for series work -Sturdy machine base -Ball bearing saw blade guides -Quick-release vise adjustable via handwheel. Clamping of the workpiece using an ergonomic quick-release lever -Easy-to-read scale for angle adjustment -Overload protection S 275N -Motor protection switch -Two switchable speed settings S 275NV -Continuously adjustable saw band speed from 20 to 90 m/min -Speed can be adjusted during operation Pressure Gauge Easy and correct adjustment of the saw blade tension

Kondisi: baru, Electric voltage 400 / 440 V Frequency 50 / 60 Hz Cedpfx Aod R Uzzjarjaa Number of phases 3 / 3 Ph

Kondisi: bekas, Hans Schreiner MBS270 metal band saw, good condition, 1.5 kW, 2450 mm band length, 227 kg Caodpfx Aswzzgnearoa Prices subject to change. Errors, misprints and typographical mistakes excepted.

Kondisi: baru, Manual bandsaw / self-lowering with double mitre capability Csdpjdx Nf Hsfx Aarjaa Cutting capacity 90° round 230 mm / flat 275 x 230 mm / square 230 mm 45° R round 195 mm / flat 190 x 190 mm / square 190 mm 45° L round 170 mm / flat 185 x 150 mm / square 150 mm 60° R round 120 mm / flat 120 x 85 mm / square 85 mm Material support height: 760 mm Saw blade dimensions: 2720 x 27 x 0.9 mm Cutting speed: 40/80 m/min Drive power: 1.1/1.5 kW // 400V // 50 Hz Smallest diameter: 5 mm Dimensions (L x W x H): 1600 x 1150 x 1477 mm Weight: 370 kg - Minimum quantity lubrication system can be fitted at additional cost. - Suitable roller conveyor and material stops available.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, panjang mata gergaji pita: 2.700 mm, lebar pita gergaji: 27 mm, Features: - Heavy-duty saw frame made of cast steel - Mitre cuts from 0° to 60° right and 0° to 45° left - Carbide saw band guides - Manual vice with quick-release lever - Sliding vice - Mechanical band tensioning with electric band monitoring - Ergonomically arranged control elements Technical Data: Motor power: 1.3 kW Band speed: 35/70 m/min Vice clamping width: 275 mm Band dimensions: 2700x27x0.9 mm Electric coolant pump: 0.06 kW Working height: 990 mm Machine weight: 424 kg Machine dimensions (WxDxH): 0.9x1.45x1.6 m Cutting Capacity: Round Square Rectangle 90° 240 mm 240x240 mm 310x200 mm 45° R 175 mm 170x170 mm 240x155 mm 60° R 110 mm 105x105 mm 140x100 mm Casdpfx Aaovpuqkjrea 45° L 150 mm 135x135 mm 145x125 mm

Kondisi: bekas, nomor mesin/kendaraan: G-ME125419aP, Optimum S130GH metal band saw, 0.25 kW, 78 kg Csdpevw Edkjfx Aarjaa Prices subject to change without notice. Errors, misprints, and typographical mistakes excepted.

Kondisi: baru, Semi-automatic metal band saw with high cutting precision. This machine allows for 90° cuts, as well as mitre cuts, steplessly adjustable: up to 45° to the left and up to 30° to the right. (Swivel range: left 45°, right 60°) Standard features: - Large rotatable support table with no wear! (The cutting channel of the band saw rotates with the mitre) - Band tension indicator - Hydraulic control of the cast iron saw arm - Hydraulic clamping of the workpiece via short-stroke cylinder - Saw frame height limitation by potentiometer from the control panel - Hydraulic cutting pressure regulation (solid material – tube) - Saw arm lowering via a hydraulic cylinder; stepless adjustment - Easy manual lateral movement (R/L) of the vice - Electric band tension monitoring with saw blade breakage detection - Coolant pump with dual supply to the band guides - Carbide band guides and support rollers - Bi-metal band saw blade M 42 - Chip brush Technical data ● Cutting range: Cajdpfx Aaoctgkzjrea 90° round 250 mm / flat 320 x 235 mm / square 235 x 235 mm 45° right round 220 mm / flat 230 x 210 mm / square 210 x 210 mm 45° left round 180 mm / flat 205 x 160 mm / square 160 x 160 mm 30° right round 130 mm / flat 130 x 105 mm / square 105 x 105 mm ● Drive power: 1.5 kW // 400 V // 50 Hz ● Total connected load: 3.35 kVA ● Band speed: 20–120 m/min, steplessly adjustable ● Saw blade dimensions: 2910 x 27 x 0.9 mm ● Remnant piece length: 20 mm ● Smallest diameter: 5 mm ● Material support height: 775 mm ● Dimensions: 1700 x 1480 x 2000 mm ● Weight: 410 kg Price on request!

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, panjang mata gergaji pita: 3.420 mm, lebar pita gergaji: 9 mm, tinggi total: 27 mm, daya pompa pendingin: 80 W, Semi-automatic metal band saw (fully hydraulic) for mitre cuts from 0° to 60° to the right and 0° to 45° to the left - 3-piece saw frame: 1. Aluminum die-cast front section for weight reduction and vibration damping 2. Crossbeam made of rectangular steel tube 120x100x4 mm 3. Cast steel on the motor side for additional vibration reduction - Heavy-duty base with integrated 40-litre coolant tank - Hydraulic lowering of the saw frame, infinitely adjustable via flow control valve - Automatic raising of the saw frame after the cut; the frame automatically returns to the previous starting position, saving time by preventing unnecessary “air sawing” - Robust, hydraulic vice, adjustable via linear guides - Mechanical saw blade tensioning with electronic blade monitoring - Gear-driven reduction gearbox with angled, hardened, and ground teeth - Drive roller fixation using locknut - Infinitely variable blade speed from 16 – 100 m/min - Carbide blade guides - Heavy-duty turntable with integrated cutting channel to prevent table damage - Engraved degree scale Codpovph Hfefx Aareaa - Mechanical mitre stops at 0°, 45°, and 65° - Swarf removal brush integrated in the blade guard - Electric coolant pump and coolant shut-off valves on each blade guide block - Ergonomically arranged control panel - 24 Volt control system

Kondisi: seperti baru (mesin pameran), Demo machine Hans Schreiner metal band saw with swivel arm, for professional use, equipped with soft hydraulic system for optimal cutting pressure, electric coolant system, suitable for all metals, steels, and stainless steel, quick-release vise, automatic cut-off, machine stand, CE compliant – showroom machine! Technical data: Caodpfxevrvuvj Aaroa Motor power output: 1500 W S, Wheel diameter: 300 mm, Saw blade dimensions: 2450 x 27 x 0.9 mm, Max. cutting capacity 90°: 260 x 140 mm, Max. cutting capacity 30°: 200 x 140 mm, Max. cutting capacity 45°: 160 x 140 mm, Max. cutting capacity 60°: 120 x 100 mm, Cutting speed: 37.5 / 75 m/min, Weight: 227 kg Sample image Subject to price changes, errors, printing and typographical mistakes excepted.

Kondisi: baru, Semi-automatic bandsaw with dual mitre capability R/L up to 60° including hydraulic blade tension indicator Minimum quantity lubrication system retrofittable Cutting capacity: 90° round: 280 mm / flat: 410 x 280 mm / square: 280 mm 45° R round: 280 mm / flat: 310 x 150 mm / square: 270 mm Csdpod Dpzgefx Aarjaa 45° L round: 280 mm / flat: 330 x 100 mm / square: 280 mm 60° R round: 210 mm / flat: 205 x 100 mm / square: 190 mm 60° L round: 220 mm / flat: 225 x 100 mm / square: 210 mm Material support height: 756 mm Saw blade dimensions: 3800 x 0.9 x 27 mm Cutting speed: 20–120 m/min Drive power: 2.2 kW Dimensions (LxWxH): 2130 x 1070 x 1440 mm Weight: 530 kg Price on request

Kondisi: baru, WITH SELF-ACTUATED FEED – GRAVITY BAND SAWS The saw frame is raised manually, and the feed rate is ensured by the frame’s own weight, with the option for fine, stepless adjustment of the feed pressure via an oil-damper throttle valve. After completing the cut, the drive motor switches off automatically. For simple and rapid machine operation, the vises are equipped with a quick-release clamping system. This model features a distinctly larger base frame and an especially robust system for miter adjustment of the saw frame, offering large material support surfaces. This guarantees high machine stability. This bandsaw is also suitable for heavy-duty industrial operations. Wide mitre range from 60° to the right to 45° to the left. Two bandsaw blade speeds: 40 and 80 m/min, saw band dimensions: 2880 x 27 x 0.9 mm. Cedpjvrv Ddsfx Aarjaa Technical Data: Output power up to: 1.4 kW (S1) Wheel diameter: 310 mm Bandsaw blade size: 2880 x 27 x 0.9 mm Swivel range: Up to 45° left, and 60° right Cutting capacity at 90°: 300 mm x 200 mm / Ø 260 mm Cutting capacity at 45°: 190 mm x 100 mm / Ø 175 mm Blade speed: 35 / 70 m/min Weight: 475 kg

Kondisi: baru, Manually operated metal bandsaw with high cutting accuracy. This machine allows for 90° cuts as well as continuously adjustable miter cuts—up to 45° to the left and up to 30° to the right (swivel range: 45° left, 60° right). Standard equipment: - Large swiveling support table with zero wear! (The saw blade channel rotates with the miter) - Band tension indicator - Hydraulic control of the cast iron saw arm - Hydraulic clamping of the workpiece via short-stroke cylinder - Height limitation of the saw frame via potentiometer from the control panel - Hydraulic cutting pressure control (solid material – tube) - Arm descent via hydraulic cylinder; infinitely adjustable - Manual raising of saw arm after cut - Smooth, manual movement of the vice left/right - Electric band tension monitoring with saw blade break control Cjdpsd Dpz Ajfx Aareaa - Coolant pump with dual supply to the saw blade guides - Carbide saw blade guides and guide rollers - Bi-metal saw blade M 42 - Chip brush Technical data ● Cutting range: round flat square 90°: round 278 mm / flat 340 x 275 mm / square 275 mm 45° R: round 260 mm / flat 320 x 255 mm / square 230 mm 30° R: round 155 mm / flat 145 x 115 mm / square 115 mm 45° L: round 205 mm / flat 275 x 180 mm / square 180 mm ● Drive power: 1.5 kW // 400V // 50 Hz ● Band speed: 20–120 m/min, stepless ● Saw blade dimensions: 3125 x 27 x 0.9 mm ● Minimum residual piece: 20 mm ● Smallest diameter: 5 mm ● Material support height: 775 mm ● Dimensions (L x W x H): 1700 x 1500 x 2100 mm ● Weight: 410 kg Price on request

Kondisi: seperti baru (mesin pameran), Exhibition machine - The best-selling bandsaw model in this category. This model is generally used in metalworking shops, machine workshops, and for assembly work. Simple mitre adjustment from 90° to 60° to the right. The bandsaw can be equipped with two drive types. High cutting precision and long blade life are ensured by three-sided carbide blade guides in guide blocks and robust bearing of all rotating components. The bandsaw is fitted with a 1730x13×0.65 mm saw blade. Equipped with base frame and coolant system. The cooling system is integrated into the base frame. Csdpjvrvuiofx Aarjaa Sample image Prices subject to change, errors and omissions excepted.

Kondisi: baru, Hans Schreiner Metal Band Saw - GRAVITY BAND SAWS with swivel arm, designed for professional use, featuring soft hydraulics for optimal cutting pressure and an electric coolant system. Suitable for all metals, steels, and stainless steel (Nirosta). The saw frame is raised manually, and the carriage feed is secured by the frame's own weight, with the option for fine, stepless adjustment of the cutting pressure via an oil damper throttle valve. Upon completion of the cut, the drive shuts off automatically. For easy and efficient machine operation, the vises are equipped with a quick-release clamping system. Includes base frame, reinforced frame for greater stability, CE-compliant. Standard equipment includes mechanically driven band brush and automatic saw frame lowering. Technical Data: Motor output: 1.4 kW (S1) Wheel diameter: 300 mm Band size: 2710 x 27 x 0.9 mm Swivel range: up to 45° left, and 60° right Cutting capacity at 90°: 280 x 180 mm Csdpfx Aevrv A Tsarsaa Ø 235 mm Cutting capacity at 45°: 185 x 100 mm Ø 185 mm Cutting speed: 40 / 80 m/min Package dimensions (L x W x H): 1600 x 800 x 1500 mm Weight: 295 kg

Kondisi: seperti baru (mesin pameran), Hans Schreiner metal band saw – demonstration unit! Technical specifications: Motor output S6 1900 W (1500 W S6-100% duty cycle), drive wheel diameter 380 mm, saw band dimensions 3160 x 27 x 0.9 mm, mitre range 45° left, 60° right, cutting capacity at 90° max. 370 x 220 mm, cutting speed 34 / 68 m/min, packaging dimensions (L x W x H): 1770 x 765 x 1120 mm, weight 365 kg Sample photo Cjdpfxovrvu Ae Aarjaa Subject to price changes, errors, and misprints.

Kondisi: baru, Hans Schreiner metal bandsaw with pivoting arm, designed for professional use, featuring soft hydraulic feed for precise cutting pressure, electric coolant system, suitable for all metals, steels, and stainless steel. Quick-release vice, automatic cut-off, base frame, and CE conformity. The semi-automatic control with pre-programmed cycle (operator starts – clamps the workpiece – cutting – returns saw arm – releases workpiece) in the MBS370SA model is ideal for locksmiths and workshops handling both small and large production batches. Reinforced frame for increased stability. Technical Specifications: - Motor output up to 1.9 kW (1.5 kW S1) - Flywheel diameter: 380 mm - Saw band dimensions: 3160 x 27 x 0.9 mm Cjdpfx Asvrv Dqeareaa - Swivel range: up to 45° left, and 60° right - Cutting capacity at 90° up to 370 mm x 250 mm - Cutting capacity at 45° up to 240 mm x 160 mm - Cutting speed: 34 / 68 m/min - Packaging dimensions (L x W x H): 1770 x 765 x 1120 mm - Weight: 380 kg