Beli Bandsaw horizontal – manual – area pemotongan bulat 221–299 mm bekas (85)

Kondisi: bekas, Tahun pembuatan: 2025, Horizontal band saw with pivoting arm for metal cutting, enables cutting perpendicular to the axis of the material as well as at any angle from 0 to 60º. Material can be fed manually or via any mechanical feeder, with automatic tool feed. The blade guides are equipped with dedicated carbide plates and bearings. This has a significant impact on blade tracking, service life, straightness of the cut, precision, and cutting quality. The saw arm is made from cast iron profile. The control panel is located adjacent to the arm. Power from the electric motor is transmitted to the drive wheel of the saw blade via a motor with a worm gearbox. The cutting blade is tensioned on two cast iron wheels using a manual tensioner and guided by an adjustable bearing and linear carbide guide system. A separate coolant tank with an electric pump is located inside. The descent speed of the saw arm (cutting speed) is hydraulically controlled. Feed rate is managed via the control panel. Two saw blade speeds are selectable: 36 and 72 m/min. In the arm rest position (after cutting), the saw blade drive is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after completing a cut or when any guard is opened; additional protection includes automatic saw shut-off in case of blade breakage. Technical data Saw blade dimensions: 2455×27×0.9 mm Blade tension: mechanical (manual) Blade speed: 36, 72 m/min Cjdpexn Itrefx Aarjaa Feed speed: 0–50 m/min (stepless) Arm descent control: stepless – hydraulic cylinder Vise base height: 900 mm Power supply: 3-phase 400 V Motor power: 1.1 kW Weight: 216 kg Warranty: 12 months Manual operation: yes CE declaration: yes Cutting capacity (diameter x rectangle x square): Angle 0º: ø230 mm / 260×150 mm / 225×225 mm Angle 45º: ø165 mm / 180×130 mm / 165×165 mm Angle 60º: ø105 mm / 100×90 mm / 110×110 mm *Please note: The machine is delivered by default without a CEE connector, as many different types are available. If you require the connector supplied with the machine, please contact the seller prior to or during purchase. NOTE! MACHINE IS RETURNED/STOCK-CLEARED ITEM, SERVICED, SOLD WITHOUT PACKAGING.

Kondisi: bekas, Tahun pembuatan: 2022, Maximum cutting diameter: 225 mm Saw band length: 2,480 mm Saw band width: 27 mm Saw band dimensions: 2,480 x 27 x 0.9 mm Mitre angle: 0 - 60° Band speed: 45 / 90 m/min Cutting range at 90° (round): max. 225 mm Cutting range at 90° (square): 190 mm Cutting range at 90° (flat): 150 x 245 mm Cutting range at 60° (round): 90 mm Cutting range at 60° (square): 90 mm Cutting range at 60° (flat): 120 x 90 mm Cutting range at 45° (round): 145 mm Csdpfx Ajtqmm Ssareaa Cutting range at 45° (square): 150 mm Cutting range at 45° (flat): 190 x 150 mm Total power requirement: 1.3 kW Machine weight: approx. 200 kg Space required: approx. 2.0 x 2.0 x 2.0 m Metal band saw OPTIMUM - OPTIsaw S 275 N - NEW MACHINE

Kondisi: baru, msk-tmpl-001 Codpfjwirpvox Aareaa

Kondisi: bekas, Tahun pembuatan: 2013, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 250 x 450 mm Cutting capacity at 45 degrees, round: 190 mm Cutting capacity at 45 degrees, square: 250 x 190 mm Table height: approx. 650 mm Saw blade length: 3300 mm Saw blade dimensions: 3300 x 27 x 0.9 mm Cutting speed: 21 - 62 m/min Total power requirement: 1.5 kW Machine weight: approx. 320 kg Space requirement: approx. 1739 x 571 x 1130 mm Very rarely used (!!) Equipment: - Electro-hydraulic horizontal bandsaw - Precision saw band guide - Infinitely variable band speed - Infinitely variable feed of the saw bow - Heavy cast-iron construction Csdpfxsxab Efs Aareaa - Manual quick clamping of material - Adjustable for mitre cuts - Replacement saw blades - Coolant device * Machine link: ?machineno=1008-9173350

Kondisi: baru, Cutting capacity at 90 degrees: round 240 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangle 165 x 310 mm Saw blade length: 2,725 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.4 t The Z252/DGH features the following equipment: - Hydraulic semi-automatic operation - Double mitre, 60° left / 45° right - Coolant pump - Base frame Csdpfx Aaofgyh Horeaa - Saw blade - 400V plug, 16A The machine is delivered fully assembled and ready for immediate use.

Kondisi: baru, Tahun pembuatan: 2024, Manual cutting cycle Automatic cut: (via selector switch) with stepless adjustment of descent speed and adjustment of cutting pressure via compensating spring Stable, torsion-resistant and low-vibration saw frame made of cast steel Large, easily adjustable and mounted rotary table, center-axis-bolted and indexed at 0° / 45° / 60°, with internal table clamping for intermediate angles Vice with quick adjustment Carbide band guides for maximum cutting precision Hydraulic unit for saw band tensioning and monitoring with display on the manometer Clearly arranged control panel with all operating elements Base frame, coolant tray, coolant pump, chip brush Csdoftmxvepfx Aarjaa Cutting diameter: 250 mm Cutting width: 280 mm Saw band dimensions: 2950 x 27 x 0.9 mm Max. vice opening: 285 mm Band speed: 36 / 72 m/min Cutting capacity at 90 degrees, round: 250 mm Cutting capacity at 90 degrees, square: 220 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 60 degrees, round: 120 mm Cutting capacity at 60 degrees, flat: 140 x 80 mm Cutting capacity at 60 degrees, square: 80 mm Cutting capacity at 45 degrees, round: 200 mm Cutting capacity at 45 degrees, flat left: 220 x 200 mm / right: — Cutting capacity at 45 degrees, square left: 200 mm / right: 170 mm Machine weight approx. 0.4 t Space requirement approx. 1.8 x 1.3 x 1.8 m

Kondisi: baru, Tahun pembuatan: 2025, Standard Equipment of the MEBAbase 32A Fully automatic bandsaw with partial enclosure for safe, clean, and quiet operation Torsion-resistant welded construction for high stability and long service life Lateral band guidance combining pre-tensioned carbide slide guides and band-twist rollers Hydraulic saw feed Infinitely variable saw feed speed from 1–300 mm/min Permanent monitoring of cutting pressure and feed rate, with automatic adjustment if cutting pressure is too high Infinitely variable cutting speed 10–80 m/min Large dimensioned coolant tank (approx. 90 liters) Automatic blade breakage detection with shutdown in the event of blade breakage Hydraulic blade tensioning Powered round brush for optimal tooth cleaning Automatic material feed with hydraulic full-stroke material clamping Robust, linear guided feed vice for maximum positioning accuracy Integrated end-of-material detection Feed vice opens on both sides Closed roller conveyor with precision ball bearing rollers Convenient part disposal via inclined cut-off chute with coolant return Robust panel controller with touchscreen, menu-guided, self-explanatory iconography Fully automatic sawing cycle for any length and quantity Simple program creation and management Chip conveyor as standard equipment Technical Data Type: Straight Cut Saw 90° Max. cutting capacity width ↔ (mm): 320 Max. cutting capacity height ↕ (mm): 320 Max. cutting capacity Ø (mm): 320 Material to cut: tube, solid round material, square tube, solid square material Motor [kW]: 5 Saw blade [mm]: 4115 x 34 x 1.1 Blade speed [m/min]: 10–80 Dimensions (LxWxH) [mm]: 2250 x 2300 x 1700 Weight [kg]: 2000 Working height [mm]: 830 Feed length per single stroke [mm]: 500 Degree of automation: Series cutting Options / Additional Equipment Caodpfjxdv Rdox Aaroa Additional chip conveyor or customer-specific chip brush solutions Extended coolant systems Customizable cutting line display (laser) Installation elements (on request) Technical modifications reserved. The machine is sold under statutory warranty conditions. Details regarding exact delivery time will be included in the order confirmation.

Kondisi: baru, Tahun pembuatan: 2025, S275 metal cutting machine Motor Type: Three-phase induction motor Connection: 400 V 50/60 Hz Power Supply: 400 V (three-phase) Protection Class: IP54 Power Output: 1.5 HP (1.1 kW) Rated Current: 400 V (3.6 A) Speed (rpm): 50 Hz: 2840/1420 Gearbox: Gear Ratio: 50 Hz: 1:30 Bandsaw Caodpexdbzbefx Aarja Blade Dimensions: 2480 x 27 x 0.9 x 6–10 mm Blade Guide Wheel Diameter: 293 mm Blade Speed: 50 Hz: 45/90 (m/min) Coolant Pump: Type: 230 V, 100 W Rated Current: 0.3 A Speed: 50 Hz: 2840 (rpm) Tank Capacity: 10 litres Mechanical Data Dimensions with Base: 1560 x 990 x 1665 (mm) Dimensions without Base: 1320 x 510 x 755 (mm) Shipping Dimensions: 1380 x 570 x 890 (mm) Weight: Net: 185 kg | Gross: 200 kg Sound Level: 70 dB Fuse: max. 16 Amps Ambient Temperature: 5–35 °C Humidity: 25–80 % General: Mitre cutting via swivelling arm Blade guidance: ball-bearing guide rollers Saw arm lift: manual Feed rate: infinitely adjustable Blade tensioning: manual via handwheel Blade guides with bearings and carbide inserts Height from floor to vice: 910 mm

Kondisi: bekas, Tahun pembuatan: 2023, Condition: Used Year of manufacture: 2023 Stock number: 6242 Cedpfx Aowiqpzsarjaa Delivery time: Immediate, subject to prior sale Country of origin: Italy Price: €5,400 Available in stock: 1 Saw frame: Swivel frame Saw blade dimensions: 2450 x 27 x 0.9 mm Blade speed: 35/70 m/min Cutting capacity 0° round: 220 mm Cutting capacity 0° square: 220 mm Cutting capacity 0° flat: 260 x 140 mm Cutting capacity 45° round: 160 mm, square: 155 mm Cutting capacity 60° round: 95 mm, square: 95 mm Working height: 965 mm Length: 1200 mm Width: 1100 mm Height: 1860 mm Weight: 240 kg Demonstration machine / as-new condition Net price (list price €6,730.00) Manual vise with quick-clamp lever Descent by self-weight with adjustable damper 2 speeds Coolant system OPTIONS: Roller conveyors and saw blades available on request

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90°: flat 280 x 220 mm Cutting capacity at 90°: square 220 x 220 mm Cutting capacity at 45°: round 230 mm Cutting capacity at 45°: flat 220 x 200 mm Cutting capacity at 45°: square 200 x 200 mm Cutting capacity at 60°: flat 140 x 100 mm Cutting capacity at 60°: square 100 x 100 mm Cutting capacity at 60°: round 110 mm Vice opening: 285 mm Speed range: 36/72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 440 kg Space requirement: approx. 1620 x 1360 mm Equipment/features: - Heavy-duty electro-hydraulic bandsaw (INDUSTRIAL) - Large, bearing-mounted rotary table * For miter cuts from 45° right to 60° left - Automatic saw bow lowering * Infinitely variable feed adjustment * Automatic cut-off at end of cut - Manual cutting function selectable - 2x saw blade speeds - Carbide blade guides - 1x saw band - 1x angle stop - Rotating chip removal brush - Operator control panel – front right Caodoxabpwjpfx Aaroa - Hydraulic power pack for saw blade tensioning * With analog pressure gauge (manometer) - Machine base with forklift pockets - Operating manual in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Kondisi: baru, Cutting capacity at 90 degrees: round 240 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 165 x 310 mm Saw blade length: 2725 x 27 x 0.9 mm Table height: 890 mm Blade speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Coolant pump Csdpfxshpktve Aarsaa - Eccentric vice - Base frame - Saw blade - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Kondisi: bekas, Tahun pembuatan: 1970, Diameter pemotongan 250 mm Panjang pita gergaji 3660 mm Caedpexc Nwusfx Aaroa Lebar potong 1,3 mm Rentang penjepitan panjang 450 mm Rentang penjepitan tinggi 250 mm Kecepatan pemotongan 20 - 70 m/menit Gaya pemotongan dapat disesuaikan secara kontinu Pemotongan kemiringan - dua sisi 45 ° Tegangan listrik 380 V Frekuensi 50 Hz Daya penggerak 0,55 kW Berat mesin sekitar 0,7 t Ruang yang dibutuhkan sekitar 1,5 x 1,0 x 1,6 m Perangkat pendingin,

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, Manual high-performance metal band saw with selectable manual or hydraulic saw frame lowering. In autonomous mode, the lowering speed is infinitely adjustable via the “Push&Pull” controller. Pulling the controller locks the frame at the previously selected speed, and it does not need to be adjusted again for subsequent cuts. Standard features: - Saw frame in sturdy cast construction - Solid round table with cutting channel for miter cuts: 0°–60° to the right and 0°–45° to the left - Sliding vise with adjustable guide bars and quick-release lever for repeat cuts - Oil-bath reduction gearbox with bronze gear and hardened, ground steel worm - Electric coolant pump for band lubrication and cooling - Mechanical blade tensioning with electronic band monitoring - Precise blade guidance via adjustable, ground carbide guides and ball bearings - “Push&Pull” control for adjusting the lowering speed - Rotating chip-removal brush - Precision angle scale for angles from 60° right to 45° left - Control panel with operation-ready indicator, main/speed selector switch, and selector for manual or autonomous lowering mode - Emergency stop button at knee height for optimal accessibility - Micro-switch in handle for motor and pump start - “Dead-man” function in manual mode - Safety switch on blade guard and blade tensioning carriage - Limit switch for motor shut-off at end of cut - Length stop for repeat cuts Caodpfxexcnqao Aarja - Material support on the feed side - Bi-metal band saw blade - Tool kit and operating instructions Technical specifications: * 400 V 2-speed three-phase motor, 1.1/1.5 kW * 2 cutting speeds (33/66 m/min) * Vise opening: 305 mm * Working height: 940 mm * Saw blade dimensions: 2750 × 27 × 0.9 mm * Weight: 380 kg Cutting capacity (mm): 90° 255 250×250 300×200 45° R 190 180×180 190×170 60° R 110 110×110 150×110 45° L 160 140×140 170×120

Kondisi: bekas, Tahun pembuatan: 1991, nomor mesin/kendaraan: 1430 91, Technical Data Cutting diameter: 260 mm Saw band length: 3660 mm Cutting width: 0.9 mm Cutting range - square: 260 x 260 mm Feed length: 500 mm Feed length (multiple): 5,999 mm Cutting speed: 17 - 106 m/min Saw band dimensions: 3660 x 25 x 0.9 mm Saw motor: 1.5 kW Total power requirement: 2 kW Machine weight: approx. 1.05 t Machine dimensions (L x W x H): 1.75 x 1.80 x 1.15 m Accessories Coolant Specifications according to manufacturer Cajdpfx Asw Eua Aearja

Kondisi: bekas, Tahun pembuatan: 1992, Cutting diameter: 260 mm Saw band length: 3,890 mm Cutting width: 340 mm Cutting speed: stepless adjustment (m/min) Total power requirement: 2.4 kW Machine weight: approx. 1.5 t Caedpfx Aaeu Rt Hderoa Space requirement: approx. 2.5 x 1.4 x 2.0 m The clamping jaws of the vice can be set for mitre cuts.

Kondisi: baru, Cutting diameter: 220 mm Cutting capacity at 90°: square 210 x 210 mm Cutting capacity at 90°: flat 230 x 185 mm Cutting capacity at 45°: round 150 mm Cutting capacity at 45°: square 150 x 150 mm Cutting capacity at 45°: flat 150 x 210 mm Cutting capacity at 60°: round 90.0 mm Cutting capacity at 60°: square 90 x 90 mm Cutting capacity at 60°: flat 90 x 100 mm Saw blade dimensions: 2455 x 27 x 0.9 mm Cutting speeds: 35 + 70 m/min Casdpfexabbgox Aarsa Working height: approx. 900 mm Total power requirement: 1.2 kW Weight: 240 kg Dimensions (L x W x H): 870 x 1550 x 1740 mm Features: - Compact / robust manual bandsaw (for hobby and industrial use) * Suitable for cutting solid materials and profiles - Mitre cuts up to 60° to the left possible - Two selectable cutting speeds (37 + 74 m/min) - Infinitely adjustable saw bow feed - Automatic shut-off at end of cut - Manual quick-release vice, incl. quick-clamping lever - Machine base - Coolant system - Operating manual BERG SCHMID Auto-Cut System = 3-stage system 1. Automatic lowering & automatic sawing 2. Manual operation – lowering and sawing 3. Rapid lowering of the saw frame – without sawing

Kondisi: bekas, Tahun pembuatan: 2020, Cutting diameter: 250 mm Saw band length: 3100 x 27 x 0.9 mm Cutting capacity at 90 degrees (square): 220 mm Cutting capacity at 90 degrees (flat): 280 x 190 mm Band speed: 37 / 74 m/min Cjdpewkvq Hjfx Aarsaa Saw motor: 1.5 kW Machine weight: approx. 0.5 t Space requirement: approx. 1.6 x 1.4 x 1.3 m Mitre band saw - Semi-automatic - Double mitre - Material detection during lowering

Kondisi: baru, Sawing capacity 90°: 250 mm / 280 x 230 mm Sawing capacity 60°: 140 mm / 140 x 140 mm Sawing capacity 45°: 230 mm / 240 x 200 mm Saw blade: 2760 x 27 x 0.90 mm Cutting speeds: 53 / 79 m/min Motor: 1200 Watt Weight: 350 kg Caodpfx Ajga Twbjaroa INCLUDED * Adjustable material clamp * Degree scale * Automatic shut-off * Enclosed worm gear transmission * Hydraulic pressure regulation * Rotatable base 45 degrees * Emergency stop * Coolant pump * Base cabinet * Quick-release clamp * Saw blade * 1-meter roller conveyor

Kondisi: baru, Cutting diameter: 225 mm Saw band length: 2480 mm Table height: 910 mm Cutting capacity at 90 degrees (flat): 245 x 150 mm Cutting capacity at 90 degrees (square): 200 x 200 mm Cutting capacity at 45 degrees (round): 160 mm Cutting capacity at 45 degrees (square): 160 x 160 mm Cutting capacity at 60 degrees (round): 100 mm Cutting capacity at 60 degrees (square): 100 x 100 mm Speed range: 45/90 m/min Saw band dimensions: 2480 x 27 x 0.9 mm Total power requirement: 1.5 kW Machine weight approx.: 200 kg Space requirements approx.: 1430 x 720 x 1700 mm Equipment: - For cutting profiles, pipes, and solid materials made of iron and non-ferrous metals - Saw bow can swivel up to 60° for mitre cuts - Infinitely adjustable downfeed via hydraulic lowering cylinder - Torsion-resistant, heavily dimensioned saw arm made of cast iron - 2 saw band speeds for optimal cutting results (400 V) - Robust construction ensures smooth and vibration-free operation - Automatic shut-off after material cut-through - Heavy-duty cast iron vice with quick-release - Ball-bearing saw band guide with quick adjustment for workpiece width for optimal results Scope of delivery: - Saw blade - Workpiece stop - Base frame - Tension gauge for band tension Csdpfxexaa Tbe Aarjaa - Vice with quick-release - Coolant system - Hydraulic lowering cylinder - Motor protection switch - Automatic shut-off

Kondisi: baru, Top quality from Taiwan! Saw band --- 2480 x 27 x 0.9 mm Sawing speed --- 45 / 90 m/min Motor --- 400V - 1.1 kW Weight --- 200 kg Cutting capacity 0° 225 mm 190 mm 150 x 245 mm Cutting capacity 45° 145 mm 150 mm 150 x 190 mm Cutting capacity 60° 90 mm 90 mm 90 x 120 mm INCLUDES * Adjustable material clamp * Degree scale up to 60° * Automatic shut-off * Low-noise electric motor * Enclosed worm gear drive * Hydraulic pressure control * CE emergency stop * Coolant pump * Base cabinet * Quick-release vice Csdpfjga T Eqsx Aaroaa * Saw band

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 x 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 x 180 mm Cutting capacity at 60° (flat): 110 x 110 mm Cutting capacity at 60° (square): 110 x 110 mm Cutting capacity at 60° (round): 120 mm Vice width: 285 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total connected load: 1.5 / 1.8 kW Machine weight: approx. 370 kg Space requirements: approx. 1,620 x 1,360 mm Equipment: - Robust electro-hydraulic bandsaw (INDUSTRIAL) - Single-sided mitre cut up to 60° - Automatic saw bow lowering with infinitely variable feed adjustment Cjdpfexaa H Iox Aaroaa - Cut-off switch at end of cut - Manual cutting function selectable - 2x saw blade speeds - Saw blade guide made of carbide plates - 1x saw blade - 1x angle stop - Rotating swarf removal brush - Control panel located at front right - Hydraulic pressure accumulator for saw blade tensioning with analogue pressure gauge (manometer) - Machine base - Operating manual in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Kondisi: baru, Tahun pembuatan: 2025, Saw blade --- 2480 x 27 x 0.9 mm Saw speed --- 45 - 90 m/min Motor --- 400V - 1.1 kW Weight --- 200 kg Casdpfxjga Tzqe Aarsa Cutting capacity 0° ----- 225 mm / 190 x 190 mm / 245 x 150 mm Cutting capacity 45° ----- 145 mm / 150 x 150 mm / 190 x 150 mm Cutting capacity 60° ----- 90 mm / 90 x 90 mm / 120 x 90 mm INCLUDES * Adjustable material clamp * Scale graduated up to 60° * Automatic shut-off * Low-noise electric motor * Enclosed worm gear transmission * Hydraulic pressure control * CE emergency stop * Coolant pump * Base cabinet * Quick-release clamp * M42 Bi-metal saw blade

Kondisi: baru, Cutting diameter: 225 mm Cutting capacity at 90 degrees: flat 245 x 150 mm Cutting capacity at 90 degrees: square 200 x 200 mm Cutting capacity at 45 degrees: flat 160 x 140 mm Cutting capacity at 45 degrees: round 160 mm Cutting capacity at 45 degrees: square 140 x 140 mm Cutting capacity at 60 degrees: flat 110 x 80 mm Cutting capacity at 60 degrees: square 90 x 90 mm Cutting capacity at 60 degrees: round 90 mm Vice: 245 mm Speed range: 46/92 m/min Saw blade length: 2450 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Casdpsxaa Dyjfx Aarja Machine weight: approx. 240 kg Space requirement: approx. 1,530 x 900 x 1,720 mm Equipment: - Compact, robust manual bandsaw - Single-sided mitre adjustment up to 60° to the left - Hydraulic lowering of the saw bow * Infinitely variable feed adjustment * Automatic cut-off at end of cut - 2 saw band speeds - Saw blade guides made of carbide plates - Manual vice with quick-release - Machine base - Coolant device - Manual saw blade tensioning (star handle at the front) - 1x angle stop - 1x metal saw blade - Operating manual

Kondisi: baru, Cutting diameter 250 mm Cutting capacity at 90 degrees: flat 280 x 220 mm Cutting capacity at 90 degrees: square 220 x 220 mm Cutting capacity at 45 degrees: round 230 mm Cutting capacity at 45 degrees: flat 220 x 200 mm Cutting capacity at 45 degrees: square 200 x 200 mm Cutting capacity at 60 degrees: flat 140 x 100 mm Cutting capacity at 60 degrees: square 100 x 100 mm Cutting capacity at 60 degrees: round 110 mm Vice 285 mm Speed range: 36/72 m/min Saw blade length 2,950 x 27 x 0.9 mm Total power requirement 1.5/1.8 kW Machine weight approx. 440 kg Space requirement approx. 1,620 x 1,360 mm Equipment/features: - Heavy-duty electro-hydraulic bandsaw (INDUSTRIAL) - Large bearing-mounted rotary table * For mitre cuts from 45° right to 60° left - Automatic saw bow lowering * Continuously adjustable feed rate * Automatic cut-off at end of cut - Manual cutting function selectable - 2x saw blade speeds - Saw blade guides made of carbide plates Cjdpfexaarkox Aarjaa - 1x saw blade - 1x angle stop - Integrated chip cleaning brush - Control panel - front right - Hydraulic tensioner for saw blade * With analogue pressure gauge (manometer) - Machine base with forklift pockets - Coolant device - Operating instructions in German

Kondisi: baru, en-GB-001 Codpfx Aoxaacieareaa