Beli Gergaji pita horizontal – semiotomatis – area potong bulat 0–300 mm bekas (123)

Kondisi: baru, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Blade speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx. 8.45 t Dimensions L x W x H: 4.485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer premium sawing technology and top performance for cutting special steels. • The welded machine frame and steel saw frame meet all cutting requirements and eliminate vibration and noise. • The chip conveyor is hydraulically driven with adjustable speed. • All machine movements (saw frame, vice, feed, saw blade guides) utilize modern linear guides capable of high static and dynamic load capacity, ensuring minimal sliding friction. • Another key feature is the roller system for material positioning, hydraulically driven. These rollers move at a right angle to the material, allowing optimal clamping. Tjdpfx Aofg E Hpodcjd • Thanks to adjustable blade height control, the operator can precisely position the band near the top edge of the material. After cutting, the blade automatically returns to its previous position. Alternatively, the ‘remain’ function can be selected to leave the blade at the lower position. During the cutting cycle, the software compares sawing load with preset values to allow the system to stop in case of irregularities. • The saw blade is cleaned by two adjustable steel brushes with hydraulic drive. • The hydraulic unit with filter and pressure gauge ensures particularly smooth operation at a constant pressure. • Precision-ground carbide inserts for saw blade clamping, complete with hardened, adjustable lateral guide rollers. The adjustable blade guide automatically moves as close as possible to the material. • The saw blade is tensioned by a hydraulic cylinder, controlled by machine software. Tension is automatically released after a preset time in idle mode or after a cutting cycle. • Automatic version with CNC control available for X-TECH 900 / 1200 models, with 500 mm feed length for high-production series. • The material is supported by a table with seven rollers. These are driven by a hydraulic orbital motor, ensuring precise placement even at maximum load. • All guided movements run on four recirculating ball guides with high capacity for static and dynamic loads; significantly reduced feed friction. Induction-hardened, ground prismatic guides. Price on request.

Kondisi: baru, Bandsaw Frame: Swivel Frame Saw Band Dimensions: 3160 x 27 x 1.1 mm Tsdpfxerzx Dts Adced Band Speed: 20-100 m/min Cutting Range Round: 270 mm Cutting Range Square: 270 mm Cutting Range Rectangular: 350 x 220 mm Dimensions (LxWxH): 2230 x 770 x 1450 mm Working Height: 910 mm Coolant Pump Motor: 0.12 kW Weight Approx.: 525 kg Cutting Range 60°: Round 150 mm, Square 100 mm, Rectangular 150 x 100 mm Cutting Range 45°: Round 240 mm, Square 170 mm, Rectangular 270 x 210 mm Cutting Range -45°: Round 210 mm, Square 180 mm, Rectangular 270 x 210 mm Motor: 1.5 kW KK Kletzer 270DGH Bandsaw Hydraulic Double-Mitre Bow Head. Heavy-duty machine constructed from structural steel. Standard Equipment: - M42 Bi-metal Saw Blade - Variable Speed - Inverter Control Unit - Coolant System - Automatic Saw Blade Breakage Shut-off System - Hydraulic Vice - Hydraulic Bow - Saw Blade Tensioning Device - Pendant Control - Double-direction Mitre Head - Heavy-duty Gearbox

Kondisi: baru, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangular 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 35 + 70 m/min Total connected load: 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL OFFER PRICE!!! Double mitre metal band saw featuring: Tsdpod Iip Nefx Adcsd - Blade speed 35 + 70 m/min - Mitre cuts up to 60° left and 45° right - Ball-bearing mounted rotary table for quick mitre adjustment - Quick-release vice, movable - Quick-action clamping lever - Automatic coolant system

Kondisi: baru, Bandsaw machine Manufacturer: OPTIMUM Model: S 275 NV Art.No.: 3300265 Tsdpfxodynpce Adced Condition: Brand new machine Cutting capacity (round): 225 mm Cutting speed: 20 - 90 m/min Standard equipment includes: - Horizontal vise - Length stop - Automatic shut-off at end of cut - Chip cleaning brush - Coolant system - Operating manual

Kondisi: baru, Cutting diameter 227 mm Bandsaw blade length 2455 mm Table height 840 mm Cutting width 260 mm Speed range: 36 / 72 m/min Bandsaw blade dimensions 2455 x 27 x 0.9 mm Cutting capacity at 90 degrees: round 227 mm Cutting capacity at 90 degrees: square 220 mm Cutting capacity at 90 degrees: flat 260 x 220 mm Cutting capacity at 45 degrees: round 150 mm Cutting capacity at 45 degrees: square 145 mm Cutting capacity at 45 degrees: flat 200 x 220 mm Total power requirement 1.5 kW Machine weight approx. 0.25 t Space requirement approx. 0.8 x 1.4 x 1.5 m Mitre Bandsaw - Automatic cutting Tsdpsfgyh Esfx Adcjd - Base frame - Coolant pump - Chip brush for cleaning the saw blade - Vice with quick adjustment

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Cutting capacity at 45 degrees, flat: 220 x 200 mm Cutting capacity at 45 degrees, round: 230 mm Cutting capacity at 45 degrees, square: 200 x 200 mm Cutting capacity at 60 degrees, flat: 140 x 100 mm Cutting capacity at 60 degrees, square: 100 x 100 mm Cutting capacity at 60 degrees, round: 150 mm Vice width: 285 mm Cutting speed range: 36/72 m/min Saw band dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Todpsxaatbsfx Adced Machine weight: approx. 460 kg Space requirement: approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - With mitre cuts from 45° to the right up to 60° to the left * Mitre adjustment via a large rotary table - MEP microprocessor control EVO for managing all functions * Swivel-mounted, located front right - Choice of manual or automatic lowering of the saw frame * Infinitely variable adjustment of the saw frame descent - Saw band guide made from hard metal plates - Hydraulic saw blade tensioning - incl. digital value display - 2x saw band speeds - 1x bi-metal saw band - Coolant device - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Operation in semi-automatic mode: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame - Electro-hydraulic opening of the vice

Kondisi: baru, Tahun pembuatan: 2026, Fully hydraulic lowering and lifting function of the saw frame Hydraulic opening and closing of the vise Automatic shut-off at end of cut, return of the saw arm to starting position Torsion-resistant saw frame made of cast steel (multi-ribbed) Hydraulic short-stroke cylinder for the vise Precisely ground, adjustable carbide saw band guides Electric coolant pump Manual blade tension with indicator, incl. electric monitoring for saw blade and cutting pressure Hydraulic vise (opening and closing) Powered chip removal brush Large, heavy-duty round support table, rotates for mitre cuts with preset cutting channel, mitre adjustment is manual, reading via scale 500 mm material stop with scale Incl. saw blade with 4/6 combo tooth pitch Machine color: - Saw frame RAL 7035 - Machine body RAL 7005 Motor: Three-phase 400 V, frequency-controlled, 1.5 kW Saw blade dimensions: 2910 x 27 x 0.9 mm Flywheel diameter: 325 mm Cutting speed: 20–120 m/min Todocl Tc Aepfx Adcjd Vise clamping width: 320 mm Working height: 760 mm Cutting capacity: At 0° = Round Ø 250 mm, Square 240 x 240 mm, Rectangle 320 x 190 mm Machine dimensions (W x D x H): 1480 x 1700 x 2000 mm Weight: 420 kg Additional accessories available on request. DELIVERY: FREE SHIPPING (within Germany) NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT SERVICE PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! REQUEST YOUR QUOTE TODAY!

Kondisi: baru, Tahun pembuatan: 2026, Standard Equipment - Torsion-resistant, robust cast saw frame - Powered chip removal brush - High-performance industrial helical gear motor - Automatic shut-off after end of cut - Mechanical saw blade tensioning with electric band break monitoring - Quick-release, movable vise - Hydraulic saw frame lowering with rapid traverse function (infinitely adjustable) - Electric coolant pump - Precision ground carbide saw blade guides (adjustable) - Large-diameter round support table, rotates with miter cuts, miter angle display (scale) on operator side - Direct switch between manual operation and lowering mode Tedpofg Eq Rsfx Adcsd - Easily removable chip collection tray - Material stop 500 mm with scale - Including combination-tooth saw blade 4/6 Technical Data - Motor: Three-phase, 400 V, pole-changing, 1.1/1.5 kW - Saw blade dimensions: 2720 x 27 x 0.9 mm - Flywheel diameter: 300 mm - Cutting speed: 40/80 m/min - Vise clamping width: 275 mm - Working height: 978 mm - Weight: 370 kg - Machine dimensions (W x D x H): 1150 x 1588 x 1477 mm Cutting range: see data sheet Further accessories available upon request. DELIVERY: FREE OF CHARGE (within Germany) NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT PARTNER AND CAN OFFER YOU THE ENTIRE FLOTT PRODUCT RANGE! REQUEST A QUOTE!

Kondisi: baru, 1 brand new semi-automatic horizontal band saw with double mitre Manufacturer: HUVEMA / Beka-Mak, Origin Turkey Model: HU 230 DGH-4 / BMSY 230 DGH Technical Data: Cutting capacity: Round 230 mm Tjdpfxjvyidme Adcod Rectangular 320 x 130 mm Square 230 mm -45° Round 180 mm -45° Flat 230 x 100 mm -45° Square 150 mm +45° Round 210 mm +45° Flat 230 x 160 mm +45° Square 180 mm +60° Round 120 mm +60° Flat 120 x 100 mm +60° Square 100 mm Working height 795 mm Main drive motor power 1.0 - 1.3 kW, 400 V, 50 Hz Coolant pump motor power 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Equipment / Special Features: • Semi-automatic operation • Hydraulically clamping vice, operated by foot pedal • Double-sided mitre cutting via pivoting saw frame o The workpiece remains stationary in position! o No need to turn the material for mitre cuts! o Highly efficient with significant time savings! • Pre-set precision stops at 0°, 45°, and 60° left, and 45° right • Exchangeable work table • Hydraulic vice, laterally adjustable to the left and right • Adjustable length stop 500 mm for identical-length cuts • The descent of the saw arm is infinitely adjustable via hydraulic cycle; after finishing the cut, the arm automatically lifts and the vice opens • Coolant system • Chip brush • Swivelling control panel • Electrical safety switch for blade tension and blade guard • Emergency stop switch • CE conformity Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Kondisi: baru, Electric voltage: 400 V Frequency: 50 Hz Number of phases: 3 Tjdod R Uz Tspfx Adcsd Weight: 486 kg Blade dimensions: 2700 x 27 x 0.9 mm

Kondisi: baru, Cutting diameter: 250 mm Cutting range at 90 degrees: flat 280 x 200 mm Cutting range at 90 degrees: square 230 x 230 mm Todpfxsw U U Uwj Adcjd Cutting range at 45 degrees: round 190 mm Cutting range at 45 degrees: flat 180 x 180 mm Cutting range at 45 degrees: square 180 x 180 mm Cutting range at 60 degrees: round 120 mm Cutting range at 60 degrees: square 110 x 110 mm Cutting range at 60 degrees: flat 110 x 110 mm Vice: 285 mm Blade speed range: 36 + 72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control: MEP NC Coolant tank capacity: 95.0 l Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 435 kg Space requirements: approx. 1000 x 2000 mm Equipment: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Miter cuts up to 60° - MEP microprocessor control EVO for monitoring all functions * positioned front right, rotatable - Optional manual or automatic lowering of the saw bow * infinitely variable adjustment of the saw bow descent - Saw blade guide made from carbide inserts - Hydraulic saw blade tensioning with digital value display - 2x blade speeds - 1x bi-metal saw blade - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift slots - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vice

Kondisi: baru, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Blade speed: 18 - 110 m/min Total power requirement: 1.5 kW Machine weight: approx. 0.42 t Space requirement: approx. 1.23 x 1.7 x 1.75 m SPECIAL PRICE!!! Double mitre metal bandsaw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts left 60° and right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast in one piece, very quiet and low-vibration cutting • Hydraulically operated, laterally adjustable vice • Guided, high-quality industrial bearings • Heavy-duty vice and machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable feed pressure regulator • Support roller (entry side) • Ball-bearing turntable Semi-automatic operation: 1. Clamp the material 2. Start the saw 3. Rapid downfeed to the workpiece or direct cutting in case of series cuts 4. Saw blade stops 5. Raise frame just above the material 6. Open vice Tedpfxsfgyh Uj Adcod

Kondisi: baru, Cutting diameter: 255 mm Saw blade length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Speed: 35 + 70 rpm Total connected load: 1.8 kW Machine weight approx.: 450 kg Space requirement approx.: 1.7 x 1.23 x 1.75 m SPECIAL OFFER PRICE!!! Double mitre metal band saw, frequency-controlled hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre left 60° / right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast as a single unit, ensures extremely quiet and low-vibration operation Tjdpofn Andjfx Adced • Hydraulic vice, laterally adjustable • Precision industrial bearings • Robust vice and machine frame, heavy-duty cast construction • Large machine base • Integrated tool compartment and chip drawer in machine substructure • Cutting monitoring via ammeter • Adjustable feed regulator for cutting pressure • Infeed roller • Ball bearing rotary table Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid feed down to material or cut straight away for series cutting 4. Switch off saw band 5. Raise frame to just above material 6. Open vice

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 450 x 320 mm Saw band length 4250 x 34 x 1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre bandsaw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitres left + right 60° without machine conversion · 34 mm saw band width · Large, ball-bearing turntable work support · Saw band guides positioned via extra wide linear guides · Powerful, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Freestanding control panel, safe and ergonomic · Storage space for bands and consumables · Cutting pressure regulator, feed regulator · Fully hydraulic vise · Super fast clamping (front loading) · Material height sensor (automatic cut start detection) Tsdofgyicspfx Adcjd Semi-automatic operation: 1. Clamp the material 2. Start the saw 3. Rapid lowering to material start or, for serial cutting, begin cutting immediately 4. Switch off saw band 5. Raise saw frame just above material 6. Open vise Optimal, material-independent cutting results thanks to fine adjustment of the saw frame using: * Pressure control valve (cutting pressure force) * Feed control valve (speed) * Switch with pictograms, simple and clear to operate

Kondisi: baru, Cutting diameter: 250 mm Saw band length: 2950 x 27 x 0.9 mm Table height: approx. 800 mm Tjdjfg E H Iepfx Adcsd Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.37 t MEP Sawing Machine: Saw band frame, vice assembly, and base made of durable cast iron High-precision degree marking on the cast iron structure Electrical system (with fully labeled wiring and 24 V low-voltage system) Control handle IP 55 for manual cycles (where applicable) Rotating chip brush for the saw band Quick-approach closing unit with vice Precise end stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Tools, operating instructions, and spare parts ordering manuals in the user’s language SHARK 281 in manual operation and SHARK 281 CCS in manual operation, but with cutting through automatic downfeed by the saw head’s own weight. CCS (Cut Control System) with (A) switch for manual and automatic cutting, (B) adjustment of cutting speed, (C) hydraulic brake with reservoir, (D) end stop for band halt. CCS is optionally available for previously delivered machines as well. Quick-adjust vice Hydraulic converter for band tension display Electric coolant pump for cooling and lubricating the saw band and maintenance-friendly coolant tray above the machine base In versions with pneumatic vice (MA), opening and closing of the vice is done via manual valve (pedal control available as an option).

Kondisi: baru, Cutting diameter 300 mm Saw blade length 3320 x 27 x 0.9 mm Blade speed 40/80 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 670 kg Operating mode in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering occurs via the unit’s own weight, is counterbalanced by a spring, and adjusted with a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the necessary position for material feeding. Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch prepared for padlock, switch or speed selector switch, emergency stop, thermal-magnetic protection, low voltage system 24 V) Electronic blade tension gauge with digital display Manual vice with quick locking Base frame with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional accessory) Electric coolant pump for blade cooling and lubrication Chip removal brush Tsdpfx Asfg E H Tsdcod Adjustable precision stops for repeated cuts of equal length Machine suitable for pallet truck transport Bimetal saw blade for solid and profile material Tools and operating instructions included.

Kondisi: baru, Cutting diameter 300 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 90°: square 260 x 260 mm Cutting capacity at 45°: flat 270 x 200 mm Cutting capacity at 45°: round 260 mm Cutting capacity at 45°: square 250 x 250 mm Cutting capacity at 60°: flat 170 x 170 mm Cutting capacity at 60°: square 170 x 170 mm Cutting capacity at 60°: round 180 mm Blade speed range: 40 / 80 m/min Bandsaw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electro-hydraulic semi-automatic bandsaw SHARK 332 SXI EVO with semi-automatic, dynamic, manual function, equipped with MEP-28 control system for mitre cuts from 45° right to 60° left. Some features: - New centralized control panel on a swiveling arm. - Low-voltage operating panel: Polyester membrane keypad with thermoformed raised buttons and operation control signal. - Display shows: * Diagnostics (messages in the user language) * Alerts (description of alarm causes) * Status of inputs and outputs * Cut counter * Time required for each cut * Bandsaw motor power consumption * Bandsaw tension * Bandsaw speed * Numerical display of the saw head position - Switch handle IP55 for manual 24V cycle. - Comprehensive program of all special cutting cycles. - Identification of other possible special cutting cycles for specific applications - New next-generation hydraulic control unit, highly efficient and low energy consumption. - Rotary table (mounted on 420 mm ball bearings with preloaded thrust bearing). - Dual blade speed (40/80 m/min.) with control - Prepared for the addition of an electronic inverter for stepless adjustment of blade speed from 20 to 90 m/min. - Saw bow feed programmable directly from the control panel for adaptation to material. Tsdpsfg E H Uefx Adcsd - Vise unit laterally adjustable left and right, with quick-action vise. - Hand-operated blade tension control with electronic converter display on screen. - Machine base designed to completely collect coolant even at maximum mitre angles. - Coolant pan (with electric pump for blade lubrication and cooling) and chip tray (can be replaced by a chip conveyor – see optional accessories) are integrated in the machine base. - Prepared for installation of minimal blade lubrication kit (optional, in addition to the standard emulsion oil lubrication). - Chip-cleaning brush. - The machine is designed for pallet jack transport. - Adjustable length stop for repeated cuts of equal length - Material support arm with roller for attaching a loading platform - Bimetal saw blade for solid and profile material. - Tools and user manual in the respective user language.

Kondisi: baru, Cutting range round: 280 mm Saw band dimensions (LxWxT): 340 x 27 x 0.9 mm Todpfx Asrz Uzfsdcjd Cutting range at 45°: 230 mm Cutting range rectangular: 350 x 220 mm Cutting range at 45° mitre, flat: 240 x 180 mm Cutting speed: 20–100 m/min Weight approx.: 595 kg Motor: 1.5 kW KK Kletzer UBS-S 280 Semi-Automatic Bandsaw High-Performance Structural Steel Saw Standard accessories: - M42 bimetal saw blade - *Variable speed - Inverter control unit - Coolant system - Automatic saw blade breakage shut-off system - Hydraulic vice - Hydraulic bow - Saw blade tensioning device - Pendant control - Mitre vice

Kondisi: baru, Bandsaw frame: Swivel frame Saw blade dimensions: 3160 x 27 x 1.1 mm Blade speed: 20–100 m/min Cutting capacity round: 270 mm Cutting capacity square: 270 mm Cutting capacity rectangular: 350 x 220 mm Dimensions (LxWxH): 2230 x 770 x 1450 mm Working height: 910 mm Weight approx.: 525 kg Cutting capacity at 60°: round 150 mm, square 100 mm, rectangular 150 x 100 mm Cutting capacity at 45°: round 240 mm, square 170 mm, rectangular 270 x 210 mm Cutting capacity at -45°: round 210 mm, square 180 mm, rectangular 270 x 210 mm Motor: 1.5 kW Coolant pump motor: 0.12 kW Band Saw KK Kletzer 270DG Gravity Feed, Double Mitre Head, Heavy-Duty Structural Steel Machine Standard equipment: - M42 bimetal saw blade - Variable speed Todpfx Adjrzx Dpjcsd - Inverter control unit - Coolant system - Automatic saw blade breakage shut-off system - Manual vice - Gravity bow action - Blade tensioning device - Pendant control - Double mitre head (2 directions) - Heavy-duty gearbox

Kondisi: baru, Saw frame: Pivoting frame Tjdpsrzx Dlsfx Adced Saw blade dimensions: 2730 x 27 x 0.9 mm Blade speed: 35/70 m/min Cutting capacity round: 230 mm Cutting capacity square: 230 mm Cutting capacity rectangular: 320 x 130 mm Dimensions (LxWxH): 1350 x 770 x 1300 mm Working height: 760 mm Coolant pump motor: 0.12 kW Weight approx.: 525 kg Cutting capacity at 45°: round 210 mm, square 180 mm, rectangular 230 x 160 mm Cutting capacity at 60°: round 120 mm, square 100 mm, rectangular 120 x 100 mm Cutting capacity at -45°: round 180 mm, square 150 mm, rectangular 230 x 100 mm Motor: 1.3 kW KK Kletzer 230DG Hydraulic Double-Mitre Head Bandsaw. High-performance machine built from structural steel. Standard equipment: - M42 bimetal saw blade - Variable speed - Inverter control unit - Coolant system - Automatic blade breakage shutdown - Manual vice - Hydraulic bow - Blade tensioning device - Pendant control - Mitre head in 2 directions - Heavy-duty gearbox

Kondisi: baru, Model designation Todpfsgvkctox Adcod Shark 282 SXI evo

Kondisi: baru, Model designation Todjgvkglspfx Adcod Shark 281 SXI evo

Kondisi: baru, Semi-automatic metal band saw with high cutting precision. This machine allows for 90° cuts as well as miter cuts, steplessly adjustable to the left up to 45° and to the right up to 30° (swivel range left 45° and right 60°). Standard Equipment: - Large, rotatable support table with zero wear! (The saw band channel swivels with the miter angle) - Band tension indicator - Hydraulic control of the cast iron saw arm - Hydraulic clamping of the workpiece via short-stroke cylinder - Height limitation of the saw frame via potentiometer from the control panel - Hydraulic cut pressure regulation (solid material – pipe) - Saw arm lowering via hydraulic cylinder; continuously adjustable - Manual lifting of the saw arm after the cut - Easy manual shifting of the vise left/right - Electric band tension monitoring with saw band breakage control - Coolant pump with dual feed to the saw band guides - Carbide saw band guides and guide rollers - Bi-metal saw blade M 42 Todpfxsd Dpz Sj Adcsd - Chip brush Technical Data: ● Cutting range: round flat square 90° 278 340 x 275 275 45° R 260 320 x 255 230 30° R 155 145 x 115 115 45° L 205 145 x 275 180 ● Drive power: 1.5 KW//400V//50 Hz ● Band speed: 20-120 m/min stepless ● Saw band dimensions: 3125 x 27 x 0.9 mm ● Minimum remaining piece length: 20 mm ● Smallest diameter: 5 mm ● Material support height: 775 mm ● Dimensions: 1700 x 1500 x 2100 mm ● Weight: 410 kg