Tahun pembuatan: 2013, jam operasional: 42.681 h, Kondisi: siap digunakan (bekas), produsen pengendali: KRAUSS MAFFEI, model controller: MC5, Mesin cetak injeksi hidrolik dari tahun 2013. Krauss Maffei 35-180 CX ini memiliki ukuran plastifikasi 180 dan diameter ulir 28 mm. Dengan 3 unit yang tersedia, pertimbangkan kesempatan untuk membeli mesin cetak injeksi hidrolik Krauss Maffei 35-180 CX ini. Hubungi kami untuk informasi lebih lanjut. Hjdpfx Ageym Uv Se Rofd • Ukuran plastifikasi: 180 • Pengaturan plastifikasi: H • Diameter ulir: 28 mm • Radius nosel: 10 mm • Diameter lubang nosel: 4 mm • Tersedia 3 unit

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 96.194 h, gaya penjepit: 2.000 kN, diameter sekrup: 40 mm, berat injeksi: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2,000 kN and platen dimensions of 920 x 760 mm. The machine is equipped with a two-component system with screw diameters of 40 mm and 25 mm, as well as an ERC 23/1-E robot system for enhanced automation. Ideally suited for precision hydraulic injection molding. Please contact us for further information on this machine. • Configuration: 2K (two-component injection molding machine) • Clamping Unit: • Platen size (H x V): 920 x 760 mm • Minimum mold height: 500 mm • Opening stroke: 750 mm • Max. daylight (distance between platens): 1,150 mm • Max. mold weight: 3,000 kg (1,500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection Unit 1 (Primary - 650H): • Screw diameter: 40 mm • Injection pressure: 1,946 bar • Shot volume (theoretical): 251 cm³ • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 • Nozzle radius: 15 mm • Injection Unit 2 (Secondary - 200W): • Screw diameter: 25 mm • Injection pressure: 2,089 bar • Shot volume (theoretical): 69 cm³ • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 Hedpfx Aoyfrb Nsg Rofd • Interfaces/Control: printer interface; process control included Additional Equipment • Robot System: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1,000 mm • Z-axis stroke: 1,600 mm • Hot runner control: 16 zones

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, jam operasional: 98.780 h, gaya penjepit: 2.000 kN, berat keseluruhan: 12.200 kg, produsen pengendali: ENGEL, model controller: CC100, en-GB Hedpfsyf H Nnjx Ag Rofd

Tahun pembuatan: 2012, Kondisi: siap digunakan (bekas), diameter sekrup: 55 mm, Engel victory 750/160 Spex ini diproduksi pada tahun 2012. Ini adalah mesin cetak injeksi hidrolik dengan core pull, pengaman pelat pendorong, katup udara 1/2" dan manifold air 10 jalur. Pertimbangkan kesempatan untuk membeli mesin cetak injeksi hidrolik Engel victory 750/160 Spex ini. Hubungi kami untuk informasi lebih lanjut. • 2 unit tersedia • Mesin 1: 29.462 jam • Mesin 2: 28.713 jam • Core pull • Pengaman pelat pendorong • Katup udara 1/2" Perlengkapan tambahan Hedpfx Ajx D I Egeg Refd • Manifold air 10 jalur

Tahun pembuatan: 2015, jam operasional: 38.845 h, Kondisi: siap digunakan (bekas), produsen pengendali: FANUC, berat keseluruhan: 4.400 kg, diameter sekrup: 16 mm, FANUC Roboshot S50iA ini diproduksi pada tahun 2015. Ini adalah mesin injeksi molding elektrik dengan gaya penutup 50 ton dan diameter sekrup 16/20 mm. Bobot mesin ini 4,4 ton dan bekerja dengan pasokan listrik 200 V~50/60 Hz atau 220 V~60 Hz. Manfaatkan kesempatan untuk membeli mesin injeksi molding elektrik FANUC Roboshot S50iA ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. • Pasokan listrik: 200 V~50/60 Hz, 220 V~60 Hz Hedpfxjyam Hij Ag Rsfd • Opsional: Penanganan Wittmann

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), produsen pengendali: FANUC, diameter sekrup: 26 mm, FANUC Roboshot S100iA ini diproduksi pada tahun 2021. Mesin ini memiliki gaya penjepit sebesar 100 ton, ideal untuk proses injection molding presisi elektrik. Pertimbangkan kesempatan untuk membeli mesin injection molding elektrik FANUC Roboshot S100iA ini. Hubungi kami untuk informasi lebih lanjut. Hjdoyam E Sopfx Ag Rsfd • 35.099 jam = diameter sekrup 32 mm • 32.691 jam = diameter sekrup 32 mm • 29.023 jam = diameter sekrup 26 mm • Opsional: Sistem penanganan Wittmann

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 68.463 h, diameter sekrup: 35 mm, Arburg 470 E 1000-700 ini diproduksi pada tahun 2011. Ini adalah mesin cetak injeksi listrik yang kokoh dengan gaya penutupan 100 ton dan diameter sekrup 25 mm. Mesin ini dioperasikan dengan 400V 3∼, 50Hz dan daya terpasang total 78kW, dirancang untuk performa yang efisien. Manfaatkan kesempatan Anda untuk membeli mesin cetak injeksi listrik Arburg 470 E 1000-700 ini. Hubungi kami untuk informasi lebih lanjut. • Tegangan operasi: 400 V, 3 fasa, 50 Hz • Tegangan kontrol: 230 V, 50 Hz; 24 V AC • Arus nominal motor: 61 A Hjdsx D Rndjpfx Ag Refd • Arus nominal pemanas: 58 A • Total arus nominal: 119 A • Total daya terpasang: 78 kW • Kalibrasi (tahun): 2027 • Unit seleksi: ya • Pelat tunggal: ya • Jarak antar tie bar: 470 x 470 mm • Opsional: Penanganan Geiger

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 70.936 h, gaya penjepit: 4.200 kN, diameter sekrup: 80 mm, This hydraulic injection moulding machine Krauss Maffei 420 - 4300 CX was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine is equipped with an injection unit featuring a screw diameter of 80 mm and an injection pressure of 2205 bar. Please enquire about the possibility of purchasing this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 800 x 800 mm • Platen dimensions (H x V): 1200 x 1200 mm • Minimum mould installation height: 380 mm • Opening stroke: 1020 mm • Daylight (distance between platens): 1400 mm • Max. mould weight: • Fixed side (DS): 3350 kg • Moving side (AS): 4460 kg • Total listed: 6700 kg • Ejector: • Stroke: 250 mm • Force: 95 kN • Retraction force: 48 kN • Pneumatic ejector: No • Core pulls: 2 on the moving side (AS) + 2 on the fixed side (DS) • Shut-off nozzle: 2-stage hydraulic cascade • Injection unit 1: • Type: SP 4300 • Screw diameter: 80 mm • Injection pressure: 2205 bar • Shot volume: 1810 ccm • Shot weight (PS): 1647 g • Injection rate (PS): 498 g/s Hfedpfeyhby Hox Ag Rsd • Plasticising throughput: 106 g/s • Screw L/D ratio: 22.5 • Nozzle radius: 12 mm • Armoured injection unit: Yes Additional equipment • KM linear robot, year of manufacture: 2021 • Hot runner control, 12 zones • Tool sensors: Priamus (p=2 / t=0)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, gaya penjepit: 2.200 kN, diameter sekrup: 70 mm, berat injeksi: 172 g, Arburg 570 S 2200-800/290 ini diproduksi pada tahun 2020. Mesin ini dilengkapi dengan sistem penggerak hidrolik dan kontrol Selogica untuk pengoperasian yang presisi. Dengan gaya clamping 2.200 kN dan diameter sekrup 40 mm, mesin ini sangat ideal untuk tugas injection molding yang detail. Manfaatkan kesempatan ini untuk membeli mesin injection molding hidrolik Arburg 570 S 2200-800/290. Hubungi kami untuk informasi lebih lanjut. Unit Pengunci Hsdpfex Nkp Iox Ag Rjfd • Jarak antara tie bar: 570 × 570 mm • Stroke pembukaan: 650 mm • Gaya ejektor: 70 kN • Stroke ejektor: 200 mm Unit Injeksi • Ukuran unit injeksi: 290 • Tekanan injeksi: 2.500 bar • Volume shot: 188 cm³ Penggerak & Kontrol • Sistem penggerak: Hidrolik • Kontrol: ARBURG Selogica

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), diameter sekrup: 45 mm, Arburg Allrounder 630S 2500-675 ini diproduksi pada tahun 2003. Ini adalah mesin injection molding hidrolik dengan diameter screw 45 mm. Pertimbangkan kesempatan untuk membeli mesin injection molding hidrolik Arburg Allrounder 630S 2500-675 ini. Hubungi kami untuk informasi lebih lanjut. Hfjdpfx Agsyaizis Rsd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, gaya penjepit: 4.200 kN, diameter sekrup: 80 mm, berat injeksi: 1.464 g, tinggi total: 2.500 mm, berat keseluruhan: 25.500 kg, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, panjang produk (maks.): 7.300 mm, This Krauss Maffei 420-3000 CX was manufactured in 2011. The robust hydraulic injection moulding machine from Germany features a clamping force of 4,200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1,464 g and an injection rate of 478 cm³/s. With a dry cycle rate of 1,200 cycles/h, it is ideally suited for high-volume production. Contact us for more information about this machine. • Electrical Data: • Power supply: 400 V / 3N~ / 50 Hz • Installed heating capacity: 36 kW • Rated power of pump motor: 75 kW • Number of barrel heating zones: 7 • Performance and Control: • Dry cycle (Euromap 6): 1,200 cycles/h • Control system/version: MC5 3.3 • Machine colour: grey / white / blue • Clamping Unit: • Mold opening force: 249.6 kN Hfedpfxeydnp Hs Ag Rsd • Distance between tie bars: 800 × 800 mm • Force of moving platen (open/close): 124.7 / 102.4 kN • Platen dimensions: 1,270 × 1,200 mm • Mold opening stroke: 1,020 mm • Minimum mould height: 380 mm • Ejector stroke: 250 mm • Moving platen travel: 1,400 mm • Injection Unit: • Nozzle tip radius: 15 mm • Nozzle aperture diameter: 6 mm • Injection pressure: 1,856 bar • Injection volume: 1,608 cm³ • Injection capacity: 478 cm³/s

Tahun pembuatan: 2010, jam operasional: 51.200 h, Kondisi: siap digunakan (bekas), diameter sekrup: 80 mm, en Hodpoyffcasfx Ag Rsfd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 13.361 h, gaya penjepit: 1.600 kN, diameter sekrup: 45 mm, produsen pengendali: ARBURG, This Arburg 520S-1500-400 injection molding machine was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-driven dual-circuit pump system for precise movements. The SELOGICA direct control with a 15-inch touchscreen enhances user convenience. Take advantage of this opportunity to purchase this hydraulic Arburg 520S-1500-400 injection molding machine. Contact us for further details. • Programmable and controlled clamping force build-up; advanced two-stage clamping program • Hydraulic, servo-driven ejector on moving platen • Screw diameter: 45 mm (without nozzle) • High-wear resistant version; sintered metal non-return ring; CrN coating on screw and non-return ring • Suitable for abrasive, corrosive, and high-temperature resistant thermoplastics • Technology level 2: servo-driven dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating power zones 1-6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator Hfsdpfx Aoyg I Egog Rsd • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor • Operating hours: 13,361 Additional equipment • None listed • Robot/automation readiness: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robot system

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), diameter sekrup: 40 mm, Krauss Maffei 150-520 C2 ini diproduksi pada tahun 2002. Mesin ini memiliki diameter sekrup 40 mm dan dilengkapi dengan robot Sepro serta konveyor penyimpanan dari tahun 2014. Mesin dalam kondisi siap pakai, dengan 50.327 jam operasi pompa dan 36.908 jam operasi otomatis. Manfaatkan kesempatan untuk membeli mesin cetak injeksi hidrolik Krauss Maffei 150-520 C2 ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Hsdpfex D Hxlox Ag Rsfd

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), This DEMAG Systec 210/580-840 was manufactured in 2019. It is a hydraulic injection moulding machine with a clamping force of 210 tons and a power rating of 60 kW. The machine has operated for 31,132 hours. Consider the opportunity to purchase this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for further information. • The dosing unit (orange section) is not included. • Integrated socket combination, country-specific Hfedjx D Nluspfx Ag Rsd • Disconnectable via main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current circuit breaker • Pneumatic 5/2 valve no. 1 on the moving mould mounting platen; • Programmable, supply via central air connection • Including hoses. Inputs and outputs are freely programmable; 3 inputs and 3 outputs; • Terminal outside of the control cabinet • Interface for additional nozzle heating band; socket only • 2-circuit core pull via directional control valve on moving platen; Q-independent (programmable); • With pilot-operated non-return valves to prevent core drift • Mould mounting dimensions E (similar to Euromap March 96) • With lateral ejector plate, locating diameter of fixed platen: 160 mm • Locating diameter of moving platen: • Increased mould installation height by 100.0 mm • Min: 340 mm • Max: 790 mm

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), en-GB Hfjdpfex D Rqrsx Ag Rod

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 45.109 h, diameter sekrup: 36 mm, berat keseluruhan: 4.400 kg, produsen pengendali: FANUC, FANUC Roboshot S150iA ini dibuat pada tahun 2015. Ini adalah mesin cetak injeksi listrik dengan gaya penutupan 150-180 ton dan diameter sekrup 36 mm. Beratnya 4,4 ton dan beroperasi dengan pasokan listrik 200 V∼50/60 Hz atau 220 V∼60 Hz. Pertimbangkan untuk membeli mesin cetak injeksi elektrik FANUC Roboshot S150iA ini. Hubungi kami untuk informasi lebih lanjut. Hedpfx Asx S Slceg Rofd • Daya listrik: 200 V, 50/60 Hz; 220 V, 60 Hz • Unit pelepas: tidak • Jarak batang: 560 x 510 • Pelat tunggal: ya • Opsi: Penanganan Wittmann

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 17.577 h, gaya penjepit: 1.600 kN, tinggi total: 2.060 mm, This SUMITOMO SHI DEMAG IntElect 160/520-340 smart was manufactured in 2013. It is an all-electric injection moulding machine renowned for its precision and efficiency. If you are looking for a high-quality injection moulding machine, consider the SUMITOMO SHI DEMAG IntElect 160/520-340 smart available for sale. Please contact us for further information. Additional Equipment • Sepro Robot SDR 11 Machine Benefits Technical Machine Advantages • Clamping unit: 160 / Clamping force: 1,760 kN / Maximum opening stroke: 495 mm / Minimum mould installation height: 275 mm / Maximum mould installation height: 585 mm • Maximum distance between platen faces: 1,080 mm / Mounting platen size (H x V): 760 x 785 mm / Clear tie bar distance (H x V): 520 x 520 mm • Ejector stroke: 125 mm / Ejection force: 35 kN • Injection unit: 340 / Screw diameter: 35 mm / L:D ratio: 20 / Injection rate (PS) without accumulator: 288 cm³/s • Metering stroke: 162 mm / Maximum nozzle stroke: 350 mm / Nozzle immersion depth (SVO): 20 mm / Nozzle contact force: 30 kN • Material hopper capacity: 35 L / Max. injection speed, standard: 300 mm/s / Max. injection speed, enhanced: 500 mm/s • Net weight without oil fill: 7,300 kg Additional Information Electrical and Pneumatic Interfaces: Power Sockets: 2 x Schuko (1Ph, 230V, 10A) 2 x IECEE (3Ph, 400V, 16A) – disconnectable via main switch Additional Schuko socket also provided (same rating) Valves: 1 x pneumatic 5/2 valve on moving platen (programmable) 2 x pneumatic 5/2 valves on stationary platen (programmable) I/O: 3 digital inputs / 3 digital outputs (freely programmable) Terminal block outside control cabinet Air & Cooling: Centralised air supply and piping Cooling system: open circuit Cooling water controller: 4 circuits with temperature display (max. 10 l/min per circuit) Hjdpex D Hnmofx Ag Refd Separate water supply connection for cooling (mould + machine) Deactivation of mould cooling (programmable by time) Mechanical Properties and Movement: Clamping and injection unit colours: Jet black (RAL9005): bed, pump unit, base cabinet Signal white (RAL9003): clamping unit, injection unit, safety guards, covers, safety doors Mould mounting platens: E-standard arrangement (similar to EUROMAP, March 1996) No lateral ejector plate Ejector: held in front position against spring-loaded ejector in mould Standard mould height Standard closing speed Motion only active with safety guard closed Screw: wear-resistant, nitrided barrel, standard L:D, 35 mm diameter Non-return valve: 3-piece, ring design Control, Programming and Monitoring: Inputs/outputs and interlock logic: freely programmable Switching programs (e.g., dry cycle, start-up scrap counter, timer-controlled cooling) Injection process: Max. injection force at max. injection speed: 200 mm/s Back pressure programmable via 6-step polygon Hold pressure switchover dependent on melt pressure Post-injection, back pressure, metering: closed-loop control Feed throat temperature control: closed-loop, max. 90°C ±9°C Reduced nozzle closure force (programmable) Clamping force: closed-loop control

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, jam operasional: 8.000 h, gaya penjepit: 500 kN, diameter sekrup: 25 mm, berat injeksi: 46 g, tinggi total: 1.779 mm, berat keseluruhan: 4.200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It is equipped with a fully electric direct drive system and the NC5+ control unit for enhanced energy efficiency and precise injection dynamics. The package includes a granulate dryer, industrial robot, conveyor belt, and temperature control units, making it ideal for high-quality injection molding processes. Please contact us for further information about this machine. Additional Equipment • Granulate dryer • Handling system • Conveyor belt – 1400 mm x 400 mm • Precision scale • Temperature units – 2x HB-Therm Machine Advantages Technical Machine Advantages • Exceptional energy efficiency Hfedpox D Eccsfx Ag Red • Increased platen rigidity and mold safety • Fully electric direct drive • Ultra-precise direct drive motors with a 0.1 ms response time • Displacement: 52 cm³ • Injection pressure: 2180 bar • Clamping plates: 520 x 570 mm Additional Information Control Unit Modern control system with NC5+ Automatic mold height and clamping force adjustment Energy-saving routines Dimensions Machine depth: 4308 mm

Tahun pembuatan: 2015, Kondisi: siap digunakan (bekas), berat injeksi: 2.424 g, This Husky HPETL230E-RSE95D-95 was manufactured in 2015. It is a fully electric injection molding system with a maximum throughput of 390 kg/h PET and a maximum shot weight of 2,424 g PET. The clamping unit is fully electric with toggle drive and features an integrated control for peripheral devices. Take this opportunity to purchase the Husky HPETL230E-RSE95D-95 all-electric injection molding machine. Contact us for more information about this machine. Additional equipment: • Mold Dehumidifier: incl. hood, spare parts package, and piping • Conveyor belt: double-sided preform filling system for cartons/cages Machine Advantages Technical Machine Benefits • The package includes two machines as well as additional components such as pellet silos, pellet feed, contamination removal system for pellets, color dosing unit, and platform. Everything visible in the images is included. • Maximum throughput: 390 kg/h PET • Clamping unit: fully electric with toggle drive • Clamping plate: moveable, roller-guided • Type: split version • Dryer: DR815HT-G3 with 4,000-liter drying hopper (stainless steel, insulated) • Husky 1: 3 tools – 28-cavity neck ring, 17.8/26/30.3 grams • Husky 2: 2 tools – 38-gauge neck, 18/29 grams Additional Information Clamping Force Clamping unit: Fully electric with toggle drive Clamping plate: Moveable, roller-guided Control System Control: Integrated control system for peripheral devices Display for cooling water temperature/pressure (inlet and return) Control output for color dosing unit Lubrication system: automatic Re-mixing device: integrated in the nozzle Tooling: H-PET injection molds with 48 cavities Preform weight: 17.8 g and 30.26 g Core dimensions: 50 x 140 mm Includes: 3-position take-out plate, basic spare parts package H-PET injection mold with 32 cavities Preform weight: 18 g and 29 g (38 mm Bericap) Core dimensions: 63.5 x 140 mm Includes: 3-position take-out plate, basic spare parts package Functions: Temperature monitoring and setting Continuous level gauge Variable dew point setting Granulate conveying: Hot transport of granulate via P07 vacuum unit to HAD400 booster bin Color Dosing Units For solid color: Volumetric, 4 dosing screws For liquid color: 4 dosing pumps Preform Production Specifications Preform weight: 17.80 g Neck finish: PCO1881 LW Length: 89.35 mm Wall thickness: 3.06 mm Base: 2.30 mm Shape: Bell Cavities: 48 Hjdpfx Agsx D Hvwo Rjfd Cycle time: 12.4 ± 0.3 s Preforms per hour: 13,935 Annual production (95% availability): 111,205,000 Throughput (kg/h): 248 Power consumption: 506 Wh/kg PET Preform weight: 29.00 g Neck finish: Bericap 38 Length: 108.59 mm Wall thickness: 3.16 mm Base: 2.42 mm Shape: Bell Cavities: 32 Cycle time: 13.7 ± 0.3 s Preforms per hour: 8,409 Annual production (95% availability): 67,101,000 Throughput (kg/h): 244 Power consumption: 532 Wh/kg PET Preform weight: 18.00 g Neck finish: Bericap 38 Length: 82.04 mm Wall thickness: 2.70 mm Base: 2.20 mm Shape: Bell Cavities: 32 Cycle time: 11.3 ± 0.3 s Preforms per hour: 10,195 Annual production (95% availability): 81,353,000 Throughput (kg/h): 184 Power consumption: 506 Wh/kg PET Preform weight: 30.26 g Neck finish: PCO1881 LW Length: 122.30 mm Wall thickness: 3.00 mm Base: 2.30 mm Shape: Bell Cavities: 48 Cycle time: 14.7 ± 0.3 s Preforms per hour: 11,755

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, gaya penjepit: 1.900 kN, diameter sekrup: 45 mm, tinggi total: 2.190 mm, berat keseluruhan: 8.900 kg, el Hsdpfx Aex D H Nqeg Rjfd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 60.159 h, gaya penjepit: 5.000 kN, diameter sekrup: 90 mm, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, This Krauss Maffei 500-4300 CX 3s injection moulding machine was manufactured in 2010. With a clamping force of 5000 kN and a maximum shot weight of 2084 g, it is suitable for high-quality injection moulding applications. Featuring a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine delivers robust performance. Take advantage of this opportunity to purchase the Krauss Maffei 500-4300 CX hydraulic injection moulding machine. Please contact us for further details. • Locking device • Mould weight: Moving side 3950 kg / Fixed side 5260 kg (total 7900 kg) • Min. mould diameter: 560 mm • Opening stroke: 1170 mm • Mould installation height: min 480 mm; max - • Max. platen distance: 1650 mm • Mounting platens (H × V): 1270 × 1200 mm • Tie-bar clearances: H 900 mm / V 800 mm • Centring ring diameter: 200 mm • Ejector: • Stroke: 250 mm • Ejector force: 95.4 kN • Retraction force: 48.6 kN • Pneumatic ejector: yes Hjdpfx Aoyg Hz Hog Rjfd • Core pulls / Controls • Core pull controls: 2 (moving platen) + 2 (fixed platen) • Shut-off nozzle: 2 hydraulic / 0 pneumatic • Process control (SPC): yes (Kistler, p=2 / t=0) • Printer interface: no / 12x USB • Hot runner control: no • Injection unit 1 • L/D ratio: 20 • Screw diameter: 90 mm • Max. shot volume: 2290 cm³ • Max. shot weight (PS): 2084 g • Injection pressure: 1839 bar • Plasticising rate: 185.8 g/s • Screw speed: 270 rpm • Nozzle orifice: 6 mm • Pump output / heating output: 90 kW / 44 kW • Other • Max. crane load: 10 tonnes • 2K capability: no • Filter nozzle/granulator: no • This is a standard fully hydraulic two-platen clamping system with fully hydraulic screw drive and constant motor. • Operating hours: 60,159 h Additional equipment: • Linear robot: KRC6-2 ARC-C • Axes: X/Y (standard), Z available

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, jam operasional: 122.158 h, gaya penjepit: 3.300 kN, diameter sekrup: 60 mm, This hydraulic injection moulding machine DEMAG ET 330 - 1450 was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for various applications. The machine is equipped with a Wittmann W322-121 linear robot to enhance automation. Take advantage of the opportunity to purchase this DEMAG ET 330 - 1450 hydraulic injection moulding machine. Contact us for further details. • Clamping Unit: • Clamping force: 3630 kN • Tie bar spacing (H x V): 710 x 630 mm • Platen dimensions (H x V): 1040 x 950 mm • Minimum/maximum mould height: 330 mm / 830 mm • Opening stroke: 675 mm • Daylight between platens: 1505 mm • Permissible mould weight: fixed side (DS) 1200 kg; moving side (AS) 2400 kg; total 3600 kg • Ejector: stroke 200 mm; force 80 kN; retraction force 35 kN • Core pull control: yes (2 units, on ejector side/AS) • Shut-off nozzle: yes (hydraulic/pneumatic 1/1) • Injection Unit 1: • Unit code: 1450-60 • Screw diameter: 60 mm • Injection pressure: 1905 bar • Shot volume: 763 cc • Shot weight (PS): 695 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Maximum dosing stroke: 270 mm • Plasticising rate: 41 g/s • Equipment/Controls: • Armoured (wear-resistant) injection unit: yes • Pneumatic ejector: yes • Process control: SPC (yes/yes) • Printer interface: integrated • Hot runner control: 0-zone (none) • Maintenance: • Hose replacement carried out in 2017 Hedpfeyg Nkwsx Ag Rjfd Additional equipment • Wittmann W322-121 CNC linear robot/extraction device (included in the scope of delivery) • Travel paths: Y-axis 1600 mm, X-axis 500 mm, Z-axis 2500 mm

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), diameter sekrup: 65 mm, en Hfjdpoyhp H Isfx Ag Rjd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jam operasional: 14.674 h, diameter sekrup: 45 mm, produsen pengendali: ENGEL, model controller: CC300 microcomputer, This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a compact two-platen design, a minimal footprint, and intelligent servo hydraulics for reduced energy consumption. The machine is equipped with a CC300 microcomputer control system, including a 21.5-inch full HD touchscreen, and an advanced material package suitable for thermoplastics up to 350°C. For further information about this injection moulding machine, please contact us. Additional Equipment • Mould heating: 32 control circuits, max. heating capacity 60 kW • Vacuum compressed air circuits: with venturi nozzle and pressure switch • Air solenoid valves: 2/2-way, R1/2 inch • Autoprotect injection monitoring: self-learning system for mould protection • Advanced material package: for thermoplastics up to 350°C, max. reinforcement level 30% Machine Advantages Qualitative Machine Benefits • High-precision and sensitive mould protection • Advanced control system with 21.5" full HD touchscreen and user authorization system Hodpfjx Nr Tnsx Ag Rsfd Technical Machine Benefits • Clamping plate stroke: 1800 mm • Max. distance between clamping plates: 2650 mm • Mould installation height: min. 850 mm, max. 1740 mm • High operational safety due to robust platen guidance and precise platen parallelism • Energy efficient with reduced power consumption and intelligent servo-hydraulics (Engel ecodrive) • Multi-circuit hydraulics for simultaneous movements (ejector, core pull, nozzle) Additional Information Machine still under power