Kondisi: baik (bekas), Tahun pembuatan: 2009, Spannkraft: 90 t Schraubendurchmesser: 30 mm Typ: Mehrteilig Hnsdpfxsy Duaao Agqek Antrieb: Hydraulisch

Kondisi: baik (bekas), Tahun pembuatan: 2002, jam operasional: 78.964 h, gaya penjepit: 3.500 kN, diameter sekrup: 50 mm, jarak antara tiang: 650 mm, volume langkah: 1.040 cm³, tekanan injeksi: 1.575 batang, de-to-hu Hnsdpjy Dcw Tofx Agqok

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 132.186 h, de2hu-20240614 Hodoyhnvhepfx Agqenk

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jam operasional: 75.851 h, Betriebsdruck (bar): 210 Spritzkraft (kN): 450 Schliesskraft (kN): 2400 Hodpfx Agjyh Ha Aoqonk Öffnungsweg (mm): 0-510 Werkzeugeinbauhöhe (mm): 260-600 Nennspannung (V/Hz): 400 / 50 Nennstrom (A): 100 Nennleistung (kW): 55 Schneckendurchmesser (Ø): 55

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, jam operasional: 97.919 h, Betriebsdruck210 Hodsyhnrpspfx Agqonk

Kondisi: baik (bekas), Tahun pembuatan: 2015, gaya penjepit: 2.200 kN, Perlengkapan: dokumentasi / manual, 1 Hedex H Awlopfx Agqjnk

Kondisi: bekas, Tahun pembuatan: 2005, Injection Moulding Machine Manufacturer: Krauss Maffei Model: KM350/1900 C2 Year of Manufacture: 2005 Clamping force: 3,500 kN Mould opening force: 220 kN Moving platen drive force: - Opening: 105 kN - Closing: 95 kN Clamping plate dimensions (H x V): 1,060 x 1,095 mm Clear spacing (H x V): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould installation height: 380 mm Maximum opening span: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Cylinder heating control zones: 6 Dry cycle time: 1,550 1/h Oil capacity: 720 l Dimensions and weights: Net weight with control cabinet: approx. 16.0 t L/W/H: 6,510 x 2,040 x 2,380 mm Maximum mould weight: 4,780 kg Injection unit: Rated capacity: 1900 Screw diameter: 70 mm Hnjdjxu Uvaspfx Agqek Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight for PS: 953 g Injection flow: 527 cm³/s Screw speed standard / option: 285 / 349 rpm Screw speed standard or stage 1: 95 PS Screw speed option or stage 2: 117 PS Nozzle contact force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT colour display and 3.5” floppy disk drive for data backup Plasticising: 1 complete thermoplastic plasticising unit in wear-resistant design, screw diameter 70 mm with shut-off valve and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, gaya penjepit: 11.772 kN, diameter sekrup: 130 mm, berat injeksi: 6.210 g, berat keseluruhan: 70.000 kg, Hydraulic injection moulding machine from 2011. This ITALTECH KS 1200 8300 ES features a screw diameter of 130 mm and a clamping force of 11,772 kN. It offers a shot volume of 8,630 cm³ and a maximum injection pressure of 1,460 bar. If you are looking for a high-quality injection moulding machine, the ITALTECH KS 1200 8300 ES we have for sale is well worth considering. Contact us for further details. Injection Unit • Injection unit size: 8300 • Screw diameter: 130 mm • L/D ratio: 20 • Shot volume (theoretical): 8,630 cm³ • Shot weight (HDPE): 6,210 g • Maximum injection pressure: 1,460 bar • Injection flow rate: 1,200 cm³/s • Screw speed: up to 110 rpm • Screw torque: 8,400 Nm • Plasticising rate (HDPE): 140 g/s • Heating capacity: 79 kW • Temperature control zones: 5 + 1 Hnsdpfx Agoy Dua Tsqok Clamping Unit • Clamping force: 11,772 kN (~1,200 t) • Opening force: 300 kN • Opening stroke: min 2,000 mm, max 1,400 mm (as specified) • Mould height: 600-1,200 mm • Maximum daylight: 2,600 mm Platen & Ejector • Platen size (W x H): 1,900 x 1,770 mm • Tie bar spacing (W x H): 1,250 x 1,120 mm • Tie bar diameter: 220 mm • Ejector force: 226 kN • Ejector stroke: 300 mm Performance & Consumption • Pump motor power: 180 kW • Installed power: 265 kW • Oil tank capacity: 1,800 l Performance • Dry cycle time: 10 s

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Perlengkapan: dokumentasi / manual, KraussMaffei KM650-4300 GX Machine Clamping force (kN): 6500 Distance between tie bars (h x v) (mm): 1110 x 960 Mold opening stroke (mm): 1450 Min. mold height (mm): 450 Max. mold height (mm): 1000 Ejector stroke (mm): 250 Screw diameter (mm): 90 (HPS-M mixing) L/D ratio: 20 Injection pressure (bar): 1839 Shot volume (cm³): 2290 Control version: MC5 Screen language: German Condition: Tested, fully operational Features: - Anti-vibration leveling pads - BluePower - Servo pump drive for reduced energy consumption - Wear-resistant softener, surcharge - BluePower - Complete insulation of the plasticizing cylinder for lower energy consumption - 2 x pneumatic valve on moving platen for blow function - 2 x pneumatic valve on fixed platen for blow function - Pneumatic cascade control, 4-fold for hot runner - Hydraulic cascade control, 4-fold for hot runner - Conveyor belt control - Mechanical robot interface according to EUROMAP 18 - Hydraulically actuated ejector plate including threaded holes and through holes in the moving platen for ejector pins - Hydraulic core pull system, 2-fold on moving platen - Hydraulic core pull system, 2-fold on fixed platen - Pneumatic core pull system, single on moving platen - Pneumatic core pull system, single on fixed platen - Pressure relief for hydraulic core pulls - Pressure relief for hydraulic cascade valves - 20 hot runner control circuits - Socket combination (3 sockets, single-phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) - Volt-free contact for "Plasticizing" signal at HAN 3 A socket - Switch-over to holding pressure depending on mold cavity pressure (Kistler) - Quality statistics - Chip card reader - Diagram display and analysis package with 10 diagrams - Trend graphics - PV regulation Hnsdoy Apdqopfx Agqjk - Production data interface consisting of 5 potential-free contacts in the control cabinet - 3 freely programmable inputs and outputs in the control cabinet KraussMaffei LRX 350 Linear Robot: - Fully integrated control system - Horizontal stroke: 4000 mm - Vertical stroke (telescopic): 2000 mm - Demolding stroke: 1200 mm - Maximum payload: 35 kg

Kondisi: baik (bekas), Tahun pembuatan: 1999, jam operasional: 139.541 h, nomor mesin/kendaraan: 175489, gaya penjepit: 500 kN, diameter sekrup: 25 mm, jarak antara tiang: 320 mm, volume langkah: 97 cm³, berat injeksi: 97 g, gaya ejektor: 30.000 N, berat keseluruhan: 2.250 kg, jenis arus masuk: Arus searah (DC), For sale is a reliable ARBURG Allrounder 320 S 500 - 150 (SELECTA series) from 1999. The machine comes from a well-maintained industrial facility and is renowned for its durability and precision in plastics processing. Technical Specifications: Model: Allrounder 320 S 500 - 150 (Selecta) Machine No. / Serial No.: 175489 Year of manufacture: 1999 Automatic operating hours: 139,541 h Total connected load: 35.5 kW Total rated current: 66 A Electrical connection data: Operating voltage: 400 V (3~ / 50 Hz) Control voltage: 230 V (~ / 50 Hz) Hodpfx Ajy Dfqcogqsnk Control DC voltage: 24 V (DC) Rated current (motor/heating): 54.0 A / 12.0 A Machine dimensions & weight: Length: approx. 3.40 m to 3.80 m (depending on injection unit version) Width: approx. 1.43 m Height: approx. 2.00 m Total weight: approx. 2,250 kg Tie bar distance (h x v): 320 mm x 320 mm Platen size (h x v): approx. 445 mm x 445 mm (up to 498 mm depending on version) Minimum mold height: 225 mm Opening stroke: 350 mm Maximum daylight opening: 575 mm Transport and loading can be organised throughout Europe for an additional fee if required. All prices are plus VAT. Inspection by appointment is possible. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase & Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or to get in touch, please visit our website.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jam operasional: 82.489 h, gaya penjepit: 1.500 kN, Hydraulic injection moulding machine from the year 2000. This Netstal Synergy 1500-460 offers a clamping force of 1,500 kN and an injection force of 279 kN. The opening stroke is 0–450 mm with a mould height range of 400–700 mm. If you are looking for a high-quality injection moulding machine, consider the Netstal Synergy 1500-460, which we are offering for sale. Contact us for further details. • Hydraulics and clamping unit • Operating pressure: 210 bar • Injection force: 279 kN • Opening stroke: 0–450 mm • Mould height: 400–700 mm • Electrical supply • Supply 1 (3L+PE) • Rated voltage: 400 V / 50 Hz • Rated current: 63 A • Motor protection: 55 A • Motor power: 30 kW • Cable cross-section: 16 mm² • Nameplate values: Rated current 55 A; Rated power 30 kW • Supply 2 (heating/control) (3L+N+PE) • Rated voltage: 400 V / 50 Hz Hnodpfx Aoy Dr Tdegqek • Rated current: 100 A • Total connected load (heating/control): 67.6 kW • Cable cross-section: 35 mm² • Nameplate values: Rated current 97.7 A; Rated power 67.6 kW • Control voltages • AC: 230 V • DC: 5 V / ±15 V / 24 V • Auxiliary units and drives • Oil filter motor: 400 V / 0.6 A • Central lubrication (slow): 400 V / 0.9 A • Central lubrication (fast): 400 V / 3.0 A • Central lubrication (F110): 230 V / 1.0 A / 0.10 kW • Heating/plasticisation and outlets • Plasticising 1: 230 V / 20.9 kW • Plasticising 2: 230 V • Mould heating: 230 V • Sockets: 230 V / 57.7 kW

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 600.230 h, gaya penjepit: 600 kN, berat keseluruhan: 6.300 kg, Hydraulic injection moulding machine from 2016. This Netstal Synergy 600-230 features a clamping force of 600 kN and an injection force of 182 kN. It operates at a system pressure of 210 bar and has a platen opening stroke of 0-350 mm. If you are looking for a high-quality injection moulding machine, consider the Netstal Synergy 600-230, which we are offering for sale. Please contact us for further details about this machine. • Operating pressure: 210 bar • Injection pressure: 150 bar • Injection force: 182 kN • Opening stroke: 0-350 mm • Tool mounting height: 200-500 mm • Protection class: IP54 • Power supply 1: 3PH+E, 400 V, 50 Hz • Rated current supply 1: 29 A • Short-circuit current (supply 1): 20 kA • Power supply 2: 3PH+MP+E, 400 V, 50 Hz • Rated current supply 2: 120 A • Short-circuit current (supply 2): 20 kA • Pump motor power: 15 kW • Heating capacity: 13.66 kW Hnodpfoy Dr Nfex Agqok • Total connected load: 65.1 kW • Total connected load (alternative): 62.4 kW • Socket F11: 400 V, 9 A • Socket F12: 230 V, 20 A • Socket F110: 230 V, 10 A

Kondisi: baik (bekas), Tahun pembuatan: 2004, Demag Concept 125/475-320 Gaya penjepit: 125 ton 2 x penarik inti pada pelat bergerak Hodpfxjxd Sz Es Agqonk + Robot Demag W621-1831: X-550, Y-1000, Z-2000 (2004)

Kondisi: perlu perbaikan (bekas), Mesin cetak injeksi, Engel ES 330/85, mesin bekas Seperti yang terlihat pada gambar, kondisi kerjanya tidak diketahui. Dimensi keseluruhan: 3100 x 1950 x 2600 mm Berat: 5500 kg Produsen: Engel Hnsdpfxsukn S Hs Agqjk Tipe: ES 330/85 Tahun pembuatan: 1997 Data kelistrikan: 380V, 60 A Kartu pengendali: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, de-hu-1 Hnodpfx Agey A Hl Ejqok

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, jam operasional: 5.797 h, gaya penjepit: 800 kN, diameter sekrup: 40 mm, lebar total: 2.042 mm, tinggi total: 1.711 mm, berat keseluruhan: 8.200 kg, panjang produk (maks.): 4.545 mm, This Netstal Elion 800-270 was manufactured in 2021. It comes equipped with a robust AXOS control system and a high-speed injection unit capable of a speed of 450 mm/s. The machine features a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a mold installation height range of 200-500 mm and is fitted with a Euromap 67 robot interface. If you are looking for a high-quality injection molding machine, consider the Netstal Elion 800-270 we have for sale. Contact us for more information. Additional Information Including Wittmann Primus 16T robot Travel ranges: Z: 1250 mm, Y: 800 mm, X: 590 mm Hnsdpsx D Rlpjfx Agqjk 5 kg payload Control: Wittmann CNC8, software Primus R8.3 R8 Teachbox Touch Vacuum circuit with additional 5/2-way valve • Injection unit: 270 Powermaster with injection speed up to 450 mm/s • Screw diameter: 40 mm, type B, 3-zone screw • Nozzle type: Pneumatically controlled needle shut-off nozzle with additional heating zone • Minimum installation height: 200 mm • Maximum installation height: 500 mm • Clamping force: 800 kN • Hydraulic unit: Fully integrated hydraulic unit, 9 kW with 140 bar operating pressure • Pneumatics: 1 air valve up to 890 liters, 1 additional air valve up to 890 liters • Safety cover design: Sealed doors, top • Operator identification: User recognition via PIN • EUROMAP 67: Standard + dynamic withdrawal Interfaces: Color feeding, freely configurable DIO: 4x output / 2x input • Mold monitoring: Available on DFP • Voltage fluctuation compensation: UPS available Extras Outlet box 1: X2510, Cekon, 16A /400V, 3P-N-PE via HS X2511, Cekon, 16A/400V, 3P-N-PE via HS X2512, Cekon, 16A/400V, 3P-N-PE via HS X2513, Cekon, 16A /400V, 3P-N-PE via outlet contactor (Function 0060) Sockets for color metering: 1X2507 / 1W7145, Schuko 10A / 230V, 1P-N-PE, via HS and 1X9507 / 1W9507, Schuko 10A / 230V, 1P-N-PE, via HS Mounting of sockets and socket housings on bracket 110.180.6902 (Function 0060) 1X3123, Zone 12 HAN 4A, screw-in, power only 1X9123, Zone 12 HAN 4A, screw-in, sensor only (Function 0110) Pneumatics 1, 1x3/2WV 890L, mounted on DAP, W2008 (Function 0470) Pneumatics 9, 1x3/2WV 890L, mounted on BAP, W2016 (Function 0470) Cooling water 1: X4051 W9088 flow measurement B1135 - B1138 (return), pressure measurement B1211 (supply) X4060 W9260 HAN16E temperature measurement B0801 (supply), B0832 (return) (Function 0490) Cooling water 2: X4050 W9086 flow measurement B1147 - B1150 (return), pressure measurement B1212 (supply) X4059 W9259 HAN16E temperature measurement B08813 (supply), B0814 (return) (Function 0490) Dosage 1C: 1x vacuum conveyor and 1x color dosing 1X2018/1W7146, HAN 4A for color dosing 1X9191/1W9946, HAN 3A for vacuum conveyor Sockets and mounting bases mounted on holder 110.180.6902 (Function 0550)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, jam operasional: 65.850 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61013689, gaya penjepit: 2.500 kN, diameter sekrup: 50 mm, jarak antara tiang: 630 mm, volume langkah: 432 cm³, tekanan injeksi: 2.304 batang, berat injeksi: 393 g, Perlengkapan: dokumentasi / manual, Here we offer, as a specialist trader of injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines on an ongoing basis. Year of manufacture: 2010 We have been a wholesaler of used injection moulding machines for over 25 years. Current notice – Tax benefit for used machines: From 01.07.2025, used machines can also benefit from a special depreciation allowance of 30% per year for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation rates as for new equipment. Keyword: Growth Booster (§ 7 para. 2 EStG-E) Currently in stock, tested at our warehouse in Hanover: Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control system: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed materials: PE and PP thermoplastics Equipment / Extras: - 2 x core pull (movable core pull, fixed core pull) - Pneumatic valve 1 on moving platen - Accumulator for increased injection capacity - Fast SK demounting CX Midrange - Ejection of cold sprue - Start handling during mould movement - Start-up control - Cycle time analysis - External USB keyboard Hnedoxqhuuspfx Agqok - Graphic analysis and maintenance notifications - Electronic coding of injection unit - Pneumatic valve at fixed platen for air blast - 12 temperature control zones - Volt-free BDE contact - Process monitoring - Cycle memory - Trend graphics – target vs. actual - PV control - Active backpressure regulation - From first ownership – origin Germany - Maintained regularly by manufacturer and previous owner Clamping unit: Clamping force: 2500 kN / 250 tonnes Tie bar spacing: 630 x 630 mm Platen size: 995 x 1050 mm Maximum daylight: 820 mm Minimum mould height: 330 mm Maximum opening stroke: 1150 mm Ejector stroke: 200 mm Ejector force: max. 57 kN / return 26.3 kN Injection unit: Screw diameter: 50 mm Injection volume: 432 ccm Shot weight: 393 g/PS Injection pressure: 2304 bar Electrics: Pump: 45 kW Heater: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation (manual, software) Available ex stock Hanover, Germany, or delivered free to your location for an additional freight charge – available immediately. The machine is offered fully tested and functional. The machine is our exclusive property. The machine is available immediately at our Hanover warehouse, is fully functional, and can be inspected under power. About our company and equipment offered: - We only sell machines owned by us, procured directly from ongoing production, from our Hanover warehouse - All offered machines are inspected and tested before disassembly - We DO NOT sell insolvency assets – we are NOT brokers or agents dealing with third-party machines - All offered machines come from successful businesses where maintenance and care are a matter of course - All offered machines are available for inspection at our warehouse

Kondisi: baik (bekas), Tahun pembuatan: 2001, jam operasional: 56.380 h, nomor mesin/kendaraan: 184172, used injection molding machine The machine comes with a complete service history, including all significant repairs and component replacements, such as hoses, etc. Manufacturer: Arburg Model: 420C 1300-350 Year of manufacture: 2001 Hnsdjvimd Nepfx Agqsk Machine No.: 184172 Control system: Selogica Operating hours: 56,380 h Regular maintenance by manufacturer Clamping unit Clamping force: 1300 kN / 130 tons Tie bar distance: 420 x 420 mm Platen size: 570 x 570 mm Ejector stroke: 175 mm / 40 kN Opening stroke: 500 mm Mould installation height: 250 mm Max. platen distance: 750 mm Injection unit Injection volume: 145 cm³ Shot weight: 127 g Screw diameter: 35 mm Injection pressure: 2500 bar Extras: - Hydraulic core pull Available immediately from our warehouse in Hanover, loaded onto truck or delivered to your facility with freight charges paid by buyer - Function-tested (guaranteed function up to first commissioning)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 53.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 206432, gaya penjepit: 2.000 kN, diameter sekrup: 50 mm, jarak antara tiang: 570 mm, volume langkah: 392 cm³, tekanan injeksi: 2.000 batang, lintasan ejektor: 225 mm, berat keseluruhan: 7.450 kg, Perlengkapan: dokumentasi / manual, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine for sale: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been wholesalers of used injection moulding machines for more than 25 years. Current note – Tax advisory and benefit for used machinery As of 01/07/2025, used machinery is also eligible for a special depreciation allowance of 30% per annum for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Fully functional Condition: Very well-maintained – German origin Extras: - Complete high-wear resistant thermoplastic injection unit, 50 mm - Screw in HC (high corrosion) version instead of standard - Selogica direct control - Hydraulic system with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastics processing - Open nozzle, 50 mm - Extended nozzle tip, 50 mm - Heating band for open nozzle Hnsdpfx Aew Tt R Iogqsk - Heating band for extended nozzle tip - Central clamping plate set, 570 mm, central ⌀ 125 mm - 2x air eject systems with pressure regulator - Air eject connection 1 - Selector unit connection - 1 core pull for serial movement, holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (to EUROMAP 67 standard), 50-pin - Central computer interface ARBURG - Additional socket distributor: 1 CEE, 1 Schuko - Serial printer interface, USB - CompactFlash interface for data storage - Operator authorization via chip card according to EUROMAP 65 - 1 additional heating control circuit for nozzle or adapter with socket - Colour dosing unit interface - Manually adjustable cooling circuits - Machine-related cooling circuits regulated - Advanced monitoring equipment package - Advanced movement package - Production control equipment package - Optimization/operation support package - Quality assurance equipment package - Documentation equipment package Complete documentation included Injection unit: - Screw diameter: 50 mm - Shot weight: 359 g/PS - Injection pressure: 2000 bar - Injection volume: 392 cm³ Clamping unit: - Clamping force: 200 tons / 2000 kN - Tie bar distance: 570 x 570 mm - Mounting platen: 795 x 795 mm - Minimum mould height: 300 mm - Maximum platen distance: 950 mm - Opening stroke: 650 mm - Ejector stroke/force: 225 mm / 66 kN - Hydraulic clamping unit Drive capacity: 22 kW Heating capacity: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is immediately available at our warehouse in Hannover, Germany and has been tested. Warranty: Warranty valid until initial commissioning Loading/Shipping: Loaded free onto buyer’s truck or delivered free to destination against freight charge Available from our Hannover/Germany warehouse Information regarding the machines we offer and our company: - We only sell our own stock, machines purchased from ongoing production, available from our Hanover warehouse - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing in third-party equipment - All machines offered come from reputable companies with consistent maintenance and care - All machines offered can be inspected at our warehouse

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 203129, gaya penjepit: 400 kN, diameter sekrup: 18 mm, volume langkah: 23 cm³, We offer the following well-maintained pre-owned injection moulding machine as a specialist dealer in injection moulding machines: We also actively purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a large-scale dealer for injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2007 Operating hours: 89,470 h (screw and cylinder replaced) Machine number: 203129 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Material diverter The machine features retrofitted interfaces for: - Tool temperature control - Heating channel - Colour dosing/colouring via Siemens Logo PLC control German language - from first ownership, sourced in Germany Regular maintenance by the manufacturer and previous owner Clamping unit: Clamping force: 400 kN / 40 t Tie bar distance: 270 x 270 mm Mounting platens: 446 x 446 mm Opening stroke: 350 mm Mould height: minimum 200 mm Maximum daylight between platens: 550 mm Ejector stroke: 125 mm Ejector force: maximum 30 kN Injection unit: Screw diameter: 18 mm Injection volume: 23 cm³ Shot weight: 21 g Injection pressure: 2,500 bar Electrical equipment: Pump: 11 kW Heating: 4 zones, 4 kW Installed power: 15 kW Pre-fuse: 50A Weight: 2,150 kg Warranty: Warranty up to first commissioning Loading/Shipping: Free loading onto buyer’s truck or delivery by freight reimbursement Hedjx Rvciepfx Agqsnk Available ex-warehouse Hannover, Germany Please note about our company and the machines we offer: - We only sell machines acquired directly from ongoing production, available from our warehouse in Hannover - All machines are inspected and tested prior to removal - We do NOT sell insolvency assets and we are NOT brokers dealing with third-party property - All machines on offer come from successful companies for whom maintenance and servicing are a matter of course - All machines are available for inspection at our warehouse

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jam operasional: 35.808 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 800 kN, diameter sekrup: 40 mm, volume langkah: 204 cm³, tekanan injeksi: 1.860 batang, berat injeksi: 186 g, Here we, as dealers in injection moulding machines, are offering the following well-maintained pre-owned injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesale distributors of injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial Number: 61013142 Year of Manufacture: 2009 Operating Hours: 35,808 h Control: MC 5 Fully functional Very well-maintained condition Machine comes from first ownership in Germany xxxxx without robot / without temperature control unit xxxxx Extras: - Pneumatic needle shut-off nozzle - Pneumatic valve 1 at BWAP - Pneumatic control for 1 hot runner - Pneumatic control for hot runner/cold runner - Reject chute - Nozzle guard door – ejector area safety door foldable - Euromap interface 18 on FWAP - Electric ejector plate in BWAP - Hydraulic auxiliary unit for hydraulic core pulls - Injection-compression moulding circuit - 2x hydraulic core pulls (on BWAP and FWAP) Hsdpfjyrd U Ujx Agqjnk - Pressure relief for core pulls on BWAP and FWAP - 8-circuit water manifold - 8x temperature control zones for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets, 2 x CEE 16A / 1 x CEE 32A - EUROMAP 67 signal interface for robot - Start-up circuit, QS package, cycle time analysis, cycle memory, event log - BluePOWER package: energy consumption display - Graphic analysis package, trend diagram - Interface for temperature control unit - Cycle time analysis, cycle value optimization Main language German Injection Unit: Screw diameter: 40 mm Shot weight: 186 g/PS Injection pressure: 1,860 bar Shot volume: 204 ccm Clamping Unit: Clamping force: 80 t / 800 kN Tie bar spacing: 420 x 420 mm Platen dimensions: 655 x 670 mm Mould height: 250 mm Max. platen distance: 750 mm Ejector stroke/force: 100 mm / 22 kN Fully electric clamping unit Warranty: Warranty until initial commissioning Loading/Shipping: Free loaded on buyer's truck or free to destination against reimbursement of freight costs Available ex our warehouse in Hanover, Germany

Kondisi: hampir baru (bekas), Tahun pembuatan: 2006, jam operasional: 33.107 h, Fungsionalitas: berfungsi sepenuhnya, Top machine from cleanroom production (pharmaceutical sector) - With rotary table 820 mm - With GEKU robot SR 500 ST x=600 y=1400 z=2500 mm - Only 33,107 operating hours - Safety housing/safety cage - Horizontal conveyor belt - Minimal paint damage / nearly as-new appearance - Fully operational The machine can be inspected under power by arrangement. Technical data Manufacturer: Engel Model: V 330H/80V/130 Combi 2-color with rotary table Serial number: 162036 Year of manufacture: 2006 Operating hours: 33,107 h Dimensions L/W/H: see drawing Weight: 10,600 kg Functionality: Fully operational Condition: Excellent Special features Control: CC 200 Screw diameter: 25 / 22 mm Shot weight: 72/35 g Injection pressure: 2391/2066 bar Injection volume: 79 / 38 ccm Clamping force: 1300 kN / 130 t Tie bar distance: Tie-barless Ejector stroke / force: 61 kN / 100 mm Clamping unit: Hydraulic Motor output: to follow Heating capacity: to follow Total connected load: to follow The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras 2-component/2-color machine Rotary table (820 mm diameter) Geku Robot SR 500 ST Safety housing / safety cage CC 200 control German/English language GEKU Robot Details SR 500 ST Control: Simotion X-axis: 600 mm Y-axis (vertical): 1400 mm Z-axis (horizontal): 2500 mm A-rotary axis: SWM 45 C-axis: Servo Gripper: SWS16 B-axis: Not present Hnjdpeub Umqofx Agqsk Warranty Warranty until first commissioning Loading/Shipping Free loaded onto buyer's truck or free delivery within Germany upon reimbursement of freight costs From our warehouse in Hanover/Germany Financing – on request – lease-purchase option Price on request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, jam operasional: 30.665 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 196184, gaya penjepit: 1.500 kN, diameter sekrup: 50 mm, jarak antara tiang: 470 mm, Perlengkapan: dokumentasi / manual, Here we offer the following well-maintained used injection moulding machine as part of our business dealing in injection moulding machines. Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important current information – Tax notice and benefit for used machines: As of 01.07.2025, used machines can also be eligible for a special depreciation of 30% per year for tax purposes. In addition to a lower price compared to a new machine, you can claim the same depreciation allowances as with a new machine. Keyword: Growth Booster (§ 7 Section 2 EStG-E) Used injection moulding machine with 2 additional available injection units (25 mm and 35 mm) Currently fitted with a 50 mm injection unit See attached document for download. Manufacturer: Arburg Model: 470C 1500-350 Year of manufacture: 11/2004 Machine No.: 196184 Control system: Selogica Operating hours: 30,665 h Regular maintenance by manufacturer Clamping unit Hnedew Rm Hdspfx Agqjk Clamping force: 1,500 kN / 150 tons Tie bar spacing: 470 x 470 mm Platen size: 650 x 650 mm Ejector stroke: 175 mm Opening stroke: 500 mm Minimum mould height: 250 mm Max. daylight between platens: 750 mm Injection unit 50 mm (highly wear-resistant) Injection volume: 392 ccm Shot weight: 359 g Screw diameter: 50 mm Injection pressure: 1,670 bar Extras - 2 additional injection units: 25 mm and 30 mm - 1x core pull - Conveyor belt integrated in machine base - Handling interface - Select unit - 2 x air blow-off - Pressure accumulator for fast injection - Electrical connection for pneumatically actuated needle shut-off nozzle - Technology level 2 with servo-driven regulated pumps - 9 electrical heating zones - Interface for mould temperature control unit - Interface for dosing/coloring device - Equipment package - Expanded monitoring, advanced movement controls, production management, process optimization / operator aids, quality assurance, documentation Visible peripheral devices not specifically listed are not included in the scope of delivery - Immediately available in our Hanover warehouse, ex-stock loaded or delivered free to destination against freight charges - Function tested (functionality guaranteed until first commissioning)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, jumlah injeksi: 2, Here we offer a well-maintained used injection moulding machine as specialist dealers in injection moulding machines. Of course, we also purchase well-maintained injection moulding machines from 2010 onwards. We have been wholesale dealers of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 520S 1600 290/70 – Two-Colour Machine Year of manufacture: 2009, single ownership from Germany • Total cycles: 12.3 million • Manual operation: 86,565 hours • Automatic operation: 78,099 hours Injection Units (2K) Hjdpfxsyzumzo Agqonk Injection Unit 1 – horizontal -290 • Screw diameter: 25 mm • Shot volume: 71 cm³ Injection Unit 2 – vertical -70 • Screw diameter: 18 mm • Shot volume: 21 cm³ Clamping Unit Mounting plates: 695 x 695 mm • Max. platen distance: 925 mm Opening stroke: 675 mm Mould height: 250 mm • Electric rotary table: available Extras Hot runner / additional axes • 12-zone integrated hot runner • 3x core pulls • 2x air blow functions  → incl. valve gate control • Various customer-specific I/Os Interfaces / Communication • ALS • Interface for temperature control units • Interface for dryer Handling / Multilift H (6 kg) • 2x vacuum circuits • 5x double-acting gripping functions • Z-axis servo-driven, 800 mm stroke • C, G, X, and B axes pneumatic • Various customer-specific I/Os  → incl. gripper monitoring Full maintenance records for the last 3 years - Both injection units resealed by Arburg - Clamping unit completely resealed by Arburg - Accumulator bottles replaced by Arburg in 2020 Warranty Warranty until initial commissioning Loading/Shipping Free loading onto buyer’s truck or free delivery against freight reimbursement Worldwide delivery Available from our warehouse in Hannover, Germany Please note regarding our machines and company: - We only sell our own machines purchased from active production, available from our Hannover warehouse - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets; we are NOT brokers handling third-party property. - All offered machines come from successful enterprises where maintenance and care are a matter of course - All machines offered are available for inspection in our warehouse

Kondisi: baik (bekas), Tahun pembuatan: 1996, jam operasional: 32.750 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 266568, gaya penjepit: 750 kN, diameter sekrup: 3.025 mm, volume langkah: 8.549 cm³, Here we offer a very well-maintained, continuously serviced injection moulding machine. We are also happy to accept well-kept machines built from 2005 onwards as trade-in. Please feel free to offer us your surplus machines. Fully functional 2-color injection moulding machine K75-S 2F in L-configuration Year of manufacture: 1996 International size: 750H 200/100 L Operating hours: 32,750 h Control unit: IQT 6 (German text) Machine No. 266568 Clamping unit (extended tie bars +200 mm) Clamping force: 750 kN / 75 tons Tie bar distance: 420 x 420 mm Platen opening: 850 mm (max) Mould installation height: 400 mm (min) Mounting platens: 605 x 605 mm Ejector force: 34 kN Ejector stroke: 150 mm Centering: 125 mm (nozzle/ejector plate) Injection units +++1st Aggregate+++ Horizontal injection unit (int. size 200) Screw diameter: 30 mm Injection volume: 85 ccm Injection pressure: 2,350 bar 4 heating zones +++2nd Aggregate+++ Vertical injection unit (int. size 100) Hnodpfxjcud Nhs Agqjk Screw diameter: 25 mm Injection volume: 49 ccm Injection pressure: 2,022 bar 3 heating zones Extras Pressure accumulator Core pull Water distributor Hopper Dimensions / Electrical Motor: 30 kW Heating: 11.7 kW Weight: 5,100 kg Dimensions: 4.5 x 1.5 x 2.5 m (LxWxH) Paintwork: RAL 7016, 7035, 1012 Availability Available ex our warehouse Hannover, free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight costs, insured ALL MACHINES OFFERED BY US ARE OUR SOLE PROPERTY