Kondisi: bekas, 1 Bsdpfx Adeyym Dce Rolf

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Tilting spindle moulder with long worktables and power feed unit Motor power: 5.5 kW, 400 V, 50 Hz Spindle speeds: 3,500 / 4,500 / 6,000 / 8,000 / 10,000 rpm with digital display Usable spindle height: 180 mm Vertical spindle stroke: 155 mm Interchangeable spindle: MK 5, diameter 30 mm Spindle tiltable: +45° / -10° Height adjustment: electric with digital display Angle adjustment: electric with digital display Fence adjustment: manual with fine adjustment Spindle clockwise/counter-clockwise rotation Bodpfx Ajyynptod Relf CE certified Extraction connection: 2 x 120 mm Working height: 860 mm Includes curved edge milling fence Includes interchangeable spindle MK 5, diameter 25 mm Includes interchangeable spindle MK 5, diameter 50 mm Dimensions (L x W x H): approx. 2650 x 1250 x 1700 mm Weight: approx. 1000 kg HOLZHER power feed unit 3 rollers 8 feed speeds Note for used machines: • Technical data subject to errors and prior sale. • Prices are ex works - loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as seen, without any warranty. Buyers are welcome to inspect the machines on site before purchase. • Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1989, Elektra Beckum Bandsaw BAS 450 DB Tahun produksi: 1989 Tinggi potong: 300 mm Panjang pita: 3.380 mm Daya motor: 1,5 kW Berat: sekitar 120 kg Bedoyy U Txopfx Ad Rjlf Lokasi: dari stok, 54634 Bitburg - tersedia segera - Penjualan antara waktu dapat terjadi

Kondisi: bekas, Holz Her Auriga 1308 FÜ + PU Compact Design - Edge Thickness 0.4 - 6 mm SPS Screen Control Edge-Control PPC 221 Color Display Pre-milling unit for jointing before gluing section Fully automatic edge magazine for coil and strip material Glue application station GLU-JET EVA and PUR adhesive, cartridge or granulate + PU Glue application via nozzle technology Workpiece height 6-65 mm automatic glue height adjustment Pressure unit 1912-3 pneumatic End trimming unit 1918 pneumatic for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of the trimming saws from 0-10° angle Bledpfx Aoyyl U Hsd Rof Milling unit 1827 MOT 4, flush trimming 8 mm, radius milling - bevel milling - 15° 1827 MOT NC axes via control panel Corner rounding unit 1832 SPS for rounding off corners up to edge thickness 3 mm in through-feed Scraper unit for bevels and radii with 2 scraper holders MOT Surface scraper unit - Finish Spraying unit - PU Complete DIA tool set included Low operating hours / from a craft business Machine is WORKSHOP OVERHAULED in TOP CONDITION Available from stock Lieboch

Kondisi: bekas, Kündig ENORM PRIMO – TOP MESIN MEJA KONSTAN / penyesuaian kepala otomatis Otomat pengkalibrasi dan penghalus permukaan dengan sabuk lebar Unit kombinasi rol kontak dan bantalan amplas pneumatik Enormatic Indikator ketebalan digital untuk ketebalan benda kerja Daya motor penggerak sabuk sekitar 9 kW Tingkat rol kontak dapat diatur tanpa langkah sesuai skala grit Meja masuk dan keluar dengan tumpuan rol Lebar kerja 1100 mm Kecepatan umpan 2,5 - 15 m/menit Mesin DIREKONDISI BENGKEL stok gudang Lieboch Blsdpfx Adoyyltcs Rjf

Kondisi: sangat baik (bekas), Lamier FL 7B 4kW Extraction System Power: 4 kW Number of collection bags: 2 pcs Diameter of collection bags: 600 mm Number of filter bags: 32 pcs Diameter of filter bags: 200 mm Bedpfx Adewnbpce Rolf Length of filter bags: 1550 mm Bag shaking system Inlet nozzle diameter: 300 mm CE certificate Overall dimensions: height 370 cm, width approx. 260 cm, depth 110 cm

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2015, - Produksi Polandia - Tahun produksi: 2015 Bodpfx Asw H Rdaod Rslf - DTR, Sertifikat CE - Penyetingan jarak pisau secara elektrik PARAMETER TEKNIS: - Tinggi pemotongan: 60 mm - Diameter pisau: 250 - 350 mm - Jumlah gergaji: 2 unit - Lebar pemotongan maksimum: 700 mm - Lebar pemotongan minimum: 90 mm - Jarak maksimum antar pisau: 460 mm - Kecepatan umpan dapat diatur dengan inverter - Rentang kecepatan umpan: 0 - 40 m/menit - Daya motor utama: 2 x 4,7 kW - Daya motor gerak umpan: 0,75 kW - Daya motor pengatur jarak pisau: 0,12 kW - Kebutuhan daya total: 11,5 kW - Meja rol sepanjang: 2 x 240 cm - Lebar meja rol: 460 mm - Diameter pipa penghubung: 160 mm - Dimensi transportasi (p/l/t): 200 / 200 / 140 cm - Berat ± 1000 kg

Kondisi: bekas, Siklon Debu, Pemisah Debu, Mesin Bekas Dimensi keseluruhan: 1200 x 1150 x 3270 mm Sisi masuk: 280 mm Sisi keluar: 250 mm Bledpjxt Tw Hsfx Ad Rjf Tinggi tabung silinder: 800 mm

Kondisi: bekas, Bilik semprot, Uap cat, Peralatan bekas Pabrikan: Kematechnik Tipe: IM-SZ-1,5-4000 Dimensi keseluruhan: Bledpfjw Tt Tvjx Ad Rof Lebar: 1500 mm Kedalaman: 2550 mm Tinggi: 2230 mm Tahun pembuatan: 2017 Kapasitas aliran udara: 4000 m³/h Daya motor: 2,2 kW

Kondisi: bekas, nomor mesin/kendaraan: 008161, tr-de-001 Bljdpfx Aex A Tlcod Rjf

Kondisi: baik (bekas), Tahun pembuatan: 1993, omga502-en Bedpfxeyy S Uas Ad Rolf

Kondisi: bekas, Number of spindles: 5 pcs. Working width: 230 mm Planing height: 120 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 5–30 m/min Control: Memory function Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- The machine is currently being overhauled by us! Short summary: ----- 5 spindles with 8,000 rpm 4 x HSK/Powerlock Axial and radial CNC adjustment of the spindles via control CNC-controlled adjustment and positioning of the feed Including Weinig/Neumann return feed system RF 15 Detailed description: ----- Technical Data: Working width: 20–230 mm Working height: 8–120 mm 1. Tool holder – bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93–145 mm Axial adjustment range: 5 mm Rabbetting device MarathonCoating for table insert in front of 1st bottom tool holder 2. Tool holder – PowerLock – right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed incl. high-performance ball bearing: 8,000 rpm Tool swing diameter 40 mm below table level: 93–200 mm Tool swing diameter 55 mm below table level: 93–180 mm Tool swing diameter for straight cutter heads max.: 163 mm Max. tool diameter behind fence level: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Bledpfeyy A Iqjx Ad Ref Spindle axially CNC controlled 3. Tool holder – PowerLock – left ----- Motor with brake: Shared motor with 2nd spindle Speed incl. high-performance ball bearing: 8,000 rpm Tool swing diameter 40 mm below table level: 93–200 mm Tool swing diameter 55 mm below table level: 93–180 mm Tool swing diameter for straight cutter heads max.: 163 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Spindle axially and radially CNC controlled 4. Tool holder – PowerLock – top ----- Motor with brake: 7.5 kW Speed incl. high-performance ball bearing: 8,000 rpm Tool swing diameter: 93–200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Split pressure shoe in front of top tool holder, adjustable to tool swing diameter and can be swiveled away from the tool, spring-loaded. Pressure shoe before and outfeed after the top tool holder with electronic digital indicators, integrated in the memory function. Spindle radially CNC controlled 5. Tool holder – PowerLock – bottom ----- Motor with brake: 7.5 kW Speed incl. high-performance ball bearing: 8,000 rpm Tool swing diameter: 93–200 mm Max. profiling depth: 15 mm Axial adjustment range: 35 mm Feed system ----- Frequency-controlled feed, steplessly adjustable with brake: 4 kW, 5–30 m/min Infeed roller in front of 1st bottom tool, pneumatically controlled high/low. Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning. Adjustment range of the feed rollers relative to the left tool holder, axial 35 mm Machine electrics ----- Operating voltage 400 V (S...

Kondisi: baru, Tahun pembuatan: 2026, Number of motors: 2 units Working length: 3000 mm Control: Yes/CNC Loading dimensions L x W x H: 4000 x 1500 x 1500 mm Weight: 800 kg HECHT Double Mitre Saw Exenso DS350E - 3000 mm ----- For wooden glazing bars, mullions, profile strips, aluminum strips, etc. Item 1.1 Article number 942.5103 1 pc. HECHT Exenso DS350E - Working length: 3000 mm - Swivel range: 22.5° (inside) to 135° (outside) - Right head traversable - Saw blade mounting Ø 350 mm - Including 1 pc. central support - Pneumatic clamping of units - Positioning control Exenso DS3 with touch panel 15" display in a dust-protected monitor housing - 3-axis control, 1 longitudinal axis and 2 swivel axes - Manual input of cutting data - Processing data from a cut list (record as specified) - Processing data from a measuring stick (wireless caliper GMF) - Ethernet connection 10/100 (TCP/IP) - USB interface - Including control cabinet, motor and software licenses Item 1.2 Article number 942.5203 DS feed unit, hydropneumatic Item 1.3 Article number 723.0121 2 pcs. DS Saw blade for wood Cross/flat tooth - positive Item 1.4 Article number 942.5236 2 sets DS workpiece clamping, combined Combined workpiece clamping consisting of: Pneumatic swing clamp for clamping material from above (free access to work table) Pneumatic horizontal clamp - anti-twist clamping cylinder with pressure plate Clamps can be selected individually via the saw’s control system Clamping sequence can also be set via the control system Includes safety pre-clamping pressure Scope of supply with 2 sets: - 2 pcs (left/right) vertical swing clamps - 2 pcs (left/right) horizontal clamps Item 1.5 Article number 942.5241 DS350 grooved table support (standard groove, special grooving per customer drawing upon request) Item 3.1 Article number 945.2007 DS350 packaging (transport frame) ----- Total price for this configuration ex works - on request! ----- ALTERNATIVE options, prices on request! ----- For horizontal clamping of offcuts with square-cut glazing bars instead of 2nd set Pos. 1.3 943.5236 DS Combined workpiece clamping! Item 2.1 Article number 942.5201 ES / DS workpiece clamping from the front - 2 pcs. anti-twist clamping cylinders - 2 pcs. cylinder supports with clamping lever ----- OPTIONAL accessories, with additional charge on request: Bedpfx Asyy A Iksd Relf ----- Item 4.3 Article number 942.5237 DS Software “Overlength” (subsequent steps must be confirmed) Process control incl. hardware. When entering a cutting dimension > maximum cutting length of the system, the cut is performed in steps. (Left unit cuts, right unit moves material and cuts to size.) ----- Item 2.1 Article number 944.1023 GMF Caliper 3000mm Complete set (1500mm plus 1500mm extension) incl. charger and receiver. A robust aluminum measuring rod with a measuring range of 3,000 mm, ideal for measuring glazing bars. Functionality For use on doors and large window sashes, the GMF caliper can be safely and quickly mechanically extended up to a measuring length of 3,000 mm. Base length: 1,500 mm Extension: 1,500 mm, automatic...

Kondisi: sangat baik (bekas), Tahun pembuatan: 1986, Scheer Mesin Pemotong Melingkar Rangka dasar yang stabil Desain portal yang memungkinkan benda kerja didorong melalui Kontrol otomatis penuh dengan mode jeda Unit bor dapat diatur ketinggian Diameter pemotongan: Min: 70 mm Maks: 305 mm Kedalaman: Maks. 40 mm Maks. 2 lembar/potongan Lubang pusat: 7-10 mm Lubang tengah: 15 - 35 mm mungkin Motor bor BM 602 Waktu siklus mesin: Kayu beech, diameter: 220 mm, kedalaman 40 mm – 40 detik Multipleks, diameter: 220 mm, kedalaman 40 mm – 20 detik Papan partikel: diameter: 350 mm, lubang bor D: 35 mm – 30 detik Bsdpfeyy St Asx Ad Rslf Lokasi: stok di 54634 Bitburg - tersedia segera -

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood System performance: Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Infeed height and saw: 900 mm (To be mounted on customer-side platform, saw requires concrete base) Sorting height: 2000 mm Connection data: Bedpfsw Sy T Hox Ad Relf Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Maximum voltage fluctuation: 5 % Compressed air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Processing capability: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on the outfeed conveyor Location: Nattheim

Tahun pembuatan: 2016, Kondisi: bekas, Belt-driven, two-stage, 2-cylinder piston compressor · 15-year warranty on the tank against rust-through due to internal coating · Equipped with rubber anti-vibration mounts for stable positioning · With intercooler and aftercooler · Easily accessible condensate drain valve · Air outlet 3/4" Common Features · Intended for use in the expansion of existing compressed air systems · Flexible extension possible by simply retrofitting a sound reduction hood (for compressors with 4 kW) Technical Data Pressure: 10 bar Intake capacity: 1000 l/min effective delivery rate: 790 l/min Drive power: 5.5 kW Speed: 995 rpm Receiver volume: 10 l Weight: 158 kg Noise level: 82 dB(A) Bodpsyfp Rusfx Ad Relf Air outlet: 3/4" internal Dimensions (W x D x H): 1005 x 650 x 770 mm Including Receiver Common Features · Vertical receiver · Simple and cost-effective inspection of the receiver via handhole or corresponding inspection openings possible · 15-year warranty on the tank against rust-through due to internal coating Technical Data Pressure: 11 bar Receiver volume: 500 l Weight: 130 kg Air outlet: G 1 Dimensions (W x D x H): 850 x 830 x 2030 mm Including Schneider DK 1500 Eco refrigeration dryer Location: Supplier

Kondisi: bekas, Tahun pembuatan: 2009, Panjang pemotongan: 4200 mm Lebar pemotongan: 3200 mm Maks. tonjolan mata gergaji: pada mata gergaji tegak 0° = 70 mm, pada mata gergaji miring 45° = 50 mm Kecepatan maju: 0-80 m/menit Kecepatan mundur: 100 m/menit Berat: sekitar 5400 kg Daya motor: 14 kW Skor mata gergaji pendahulu: 1,5 kW Alat: diameter: 350 mm Lubang: 30 mm Koneksi ekstraksi bawah: 140 mm Koneksi ekstraksi pada balok tekan: 100 mm Lokasi penyimpanan: Pemasok Bledpfx Aoyf Nu Ted Rjf

Kondisi: bekas, Tahun pembuatan: 2014, with jointing milling unit including DIA tools jointing thickness up to 40 mm workpiece thickness up to 3 mm combined milling station radius R 2.5 mm Technical description: with hot-melt adhesive application to the workpiece for edge material up to 3 mm 60 mm workpiece thickness without jointing unit, 40 mm workpiece thickness with jointing unit Maintenance-free, coated glue pot HF trimming station (16,000 rpm) for front and rear edge overhang HF milling station (16,000 rpm) with replaceable insert cutter (combined version) and fine adjustment of the cutter from the operator side Free slots for additional processing units (Hebrock system) Feed speed approx. 10 m/min Cutting depth adjustment of the trimming saw Signal lamp for workpiece sequence Robust chain drive Ergonomically arranged operator panel Double-roller upper pressure beam Aggregate viewing windows accessible from both the operator and rear machine side PLC control system with touchscreen included Technical data: - Feed speed: 10 m/min - Panel thickness from 8 – 40 mm Blodsyfp N Depfx Ad Rsf - Weight: depending on equipment approx. 1400 kg - Dimensions (L x W x H): 5000 x 1445 x 1600 mm airtronic for machines up to 8 mm edge thickness – 1 pc Technical data: Edge thickness possible: 1.2 mm – 3.0 mm Maximum panel thickness: 25 mm Feed speed: 7 – 10 m/min depending on edge material Ready for operation: 3 min Air consumption: approx. 800 l/min for the complete machine Power max.: 32A / 16 kW for the complete machine; higher power supply necessary for machines with groove saw Extraction as before PLC control is mandatory Upgrade to 8 mm edge thickness 1 pc up to max. 40 mm workpiece thickness Including pneumatic saw adjustment Separate pneumatic cutter adjustment 1 pc, controllable from the operator panel (straight/radius) Buffing station (buffing wheel) 1 pc Corner rounding cutter 1 pc incl. combination tool and pneumatic adjustment, chamfer/radius Max. workpiece thickness 40 mm Min. workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 pc incl. pneumatic lift-off device radius R 2.0 mm Flat scraper 1 pc with pneumatic engagement control Glue pot change system in preparation 1 pc without second glue pot – includes possibility to process PU glue with the machine – without glue discharge device downwards Special PU glue discharge cleaning system downwards 1 pc 60 mm panel thickness for machine with jointing 1 pc – max. workpiece thickness with jointing unit 60 mm – jointing thickness at 40 to 60 mm – workpiece thickness up to 2 mm Special infeed fence for overlaid panels 1 pc, 16 mm and 19 mm thickness Max. overlay of edging 8 mm Separate extraction for jointing unit 1 pc, directly at jointing unit, vertically upwards, d=80mm, for optimal extraction performance from AKV 3005 DK-F onwards strongly recommended Ball bearing for corner rounding cutter 24.1mm 1 pc Ball bearing for corner rounding cutter 24.2mm 1 pc Nesting for the combination milling unit 1 pc For processing workpieces with cup hinge drillings Only possible on the underside of the workpiece Nesting for the radius scraper unit 1 pc For processing workpieces with cup hinge drillings Only possible on the underside of the workpiece Release agent spray device 1 pc Cleaning agent spray device 1 pc for easier removal of adhesive residue Antistatic spray device 1 pc Mandatory for airtronic Antistatic coolant is sprayed on the inner sides of the edge overhang before the combination milling station Location: Supplier

Kondisi: bekas, Tahun pembuatan: 2014, complete in standard configuration with: - Fully automatic electronic control with foot pedal for clamping, drilling, and releasing; electric intermittent operation - Automatic retraction of the drilling unit after reaching the set drilling depth - Automatic extension of the drilling hole depth for end-grain drilling saves re-adjustment of the drilling depth when switching from flat-surface to end-grain drilling. (+10 mm, e.g., with dowel length 35 mm, drilling depth flat side 14 mm, drilling depth end side 24 mm) - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm) including 21 quick-change chucks (System Ganner) for easy drill bit changes - Easy swivel of the drilling unit from 0° to 90°, assisted by gas cylinder - 1 clamping beam, movable along Y-axis, with 3 pneumatic clamping cylinders for workpiece height up to max. 80 mm - Ideal stop system comprising: - 1 stop rail 1800 mm for shelf drilling (aluminium profile 40x40 mm) with 3 drop-in stops, with quick-change system, easily switchable from right to left stop side for mirrored shelf drilling in carcass construction, also suitable for series drilling in System 32 - Side stops and position settings, as well as drilling height setting over support table via mechanical digital counters - Side stops can be easily swung away for the shortest possible changeover between carcass, frame, and line boring - Clamping arms for clamping beam designed for line boring positions up to max. 300 mm - Ideal three-stage... (weight: approx. 400 kg gross, approx. 350 kg net) Dimensions: (L x W x H) 1.35 m x 1.25 m x 1.40 m Blsdsyyxkhspfx Ad Rof Equipment: - 1 dust extraction funnel, dust-tested, ø 120 mm - 1 set for series drilling in System 32, complete with: - 1 base rail 1050 mm (aluminium profile 40x40 mm) - 1 setting gauge for series drilling - 1 frame dowel device, complete with: - 1 central stop - 1 round stop bar, 850 mm long - 2 stops Location: Nattheim

Kondisi: bekas, tinggi total: 2.400 mm, panjang total: 2.450 mm, lebar total: 650 mm, Unladen weight: 250 kg Price: On request What are presale items at Second Owner? Presale items are machines that we sell in their current condition (“as-is”). We have purchased these machines solely based on photos and are selling them with the information specified in the listing. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Furthermore, these machines are often not in stock yet and have not been inspected by us. These machines are offered at attractive prices, meaning the prices are lower than usual, but the full risk lies with the buyer. Please review the information in the listing carefully before making a purchase. If you have any questions, feel free to contact us! - Documentation available: No Blsdeyy R Ryepfx Ad Rsf - CE certificate present: No - Number of filter bags [pcs]: 3 - Filter length [mm]: 1200 - Filter diameter [mm]: 500 - Filter area [m²]: 7 - Connection diameter [mm]: 250 - Number of connections [pcs]: 1 - Main fan [pcs]: 1 - Collection bag: Yes - Number of containers/bags [pcs]: 3 - Voltage [V]: 400 - Fuse [A]: 16 - Transport dimensions: 2450mm x 650mm x 2400mm (L x W x H) - Transport weight [kg]: 250kg - Number of transport packages [pcs]: 1 Financial information VAT: The stated price is exclusive of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Kondisi: baik (bekas), 1 Bljdjb A Igpspfx Ad Rjf

Kondisi: bekas, Tahun pembuatan: 2004, lebar total: 750 mm, tinggi total: 1.000 mm, Weight: 500 kg Dimensions (L x W x H): 90 x 75 x 100 cm Price: On request What are Presale items at Second Owner? Presale items are machines sold by us in their current condition (“as-is”). We have purchased these machines solely based on photos and are reselling them with the information provided in the listing. Unfortunately, we do not have additional details, such as precise dimensions or full machine specifications. Furthermore, these machines are often not yet in stock and have not been inspected by us. These machines are offered at attractive prices, meaning that prices are lower than usual, but all risks are borne entirely by the buyer. Please review the information in the listing carefully before making a purchase. If you have any questions, please feel free to contact us! - Year of manufacture: 2004 - Documentation available: No - CE marking available: Yes - CE certificate available: No - Serial number: 122588 - Max. planing width [mm]: 400 - Max. planing height [mm]: 230 - Cutter block speed [rpm]: 4200 - Table length [mm]: 850 - Table width [mm]: 420 - Cutter block diameter [mm]: 100 Blodpjyy Rz Esfx Ad Rof - Blade type: Tersa - Number of blades [pcs.]: 3 - Number of cylinders height adjustment [pcs.]: 1 - Table rollers [pcs.]: 2 - Extraction port diameter [mm]: 100 - Height adjustment: Manual - Voltage [V]: 400 - Power consumption [A]: 10.5 - Fuse [A]: 16 - Power [kW]: 4.2 - Transport dimensions: 900mm x 750mm x 1000mm (l x w x h) - Transport weight [kg]: 500kg - Number of transport packages [pcs.]: 1 Financial information VAT: The quoted price is exclusive of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Kondisi: bekas, Tahun pembuatan: 2003, panjang total: 6.300 mm, lebar total: 1.500 mm, tinggi total: 2.800 mm, en-230610-1 Bodpfx Asyy Rynsd Rslf

Kondisi: bekas, Tahun pembuatan: 2003, panjang total: 4.510 mm, lebar total: 1.450 mm, tinggi total: 2.300 mm, de-hu-001 Bodpjyy N D Esfx Ad Relf

Kondisi: bekas, Tahun pembuatan: 1999, panjang total: 3.400 mm, lebar total: 2.100 mm, tinggi total: 1.750 mm, Price: On request - Year of manufacture: 1999 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: 99-02-64 - Main motor power [kW]: 5.5 - Roller table length [mm]: 3400 - Table width [mm]: 1450 - Min. saw blade diameter [mm]: 350 - Max. saw blade diameter [mm]: 450 - Saw blade bore diameter [mm]: 30 - Dust extraction port diameter [mm]: 120 Bjdpoyy Nvhefx Ad Rslf - Electrically adjustable axes: Tilting, cutting height - Options: Scoring unit - Spindle speed: - Max. spindle speed [rpm]: 4000 - Tiltable saw unit: - Min. tilting angle [°]: 0 - Max. tilting angle [°]: 45 - Voltage [V]: 400 - Current consumption [A]: 13.5 - Power [kW]: 5.5 - Transport dimensions: 3400 mm x 2100 mm x 1750 mm (L x W x H) Financial Information VAT: The listed price is exclusive of VAT VAT/margin taxation: VAT deductible for companies Delivery and trade-in possible at any time for all items from the industrial sector. Yorick Diebels