Beli Pusat pemesinan horizontal dengan meja travers (untuk kayu) bekas (221)

Tahun pembuatan: 2010, Kondisi: baik (bekas), USED CNC BIESSE BREMA EKO 902 INSERT TECHNICAL DETAILS: 3-AXIS CNC MACHINING CENTER (X-Y-Z) - Full protection of the operating head and working area on the machine - Numerical control (controller) with BIESSE Works software running on Windows - Vertical positioning of panels, with 2 panel locking clamps - Panel feed (in X-axis direction, on lower support with rubber-coated wheels), movement (on X-axis) of the panel holding/fixing clamps WORKPIECE DIMENSIONS (WORKING DIMENSIONS): - Length: Min 160 mm / Max 3200 mm - Width: Min 35 mm / Max 900 mm - Thickness: Min 8 mm / Max 80 mm WORKING UNITS: - 1 vertical spindle (electrospindle) ER32 (4.5 KW) with inverter (up to 18,000 RPM) - 1 circular saw blade (for grooving) 120 mm diameter (fixed, X-axis) - 13 independent vertical drilling spindles (6 on X-axis + 7 on Y-axis) - 8 independent horizontal drilling spindles (3+3 on X-axis and 1+1 on Y-axis) - 1 boring unit for hinge drilling Hfsdpfx Akjhknbrevon - Total installed power 20 KW AUTOMATIC DOWEL INSERTION UNIT ON BOTH SIDES WITH PRESSURE PUMP FOR GLUE APPLICATION.

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X-axis: 4,300 mm X-axis pendulum operation: 1,620 mm Y-axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X-axis: 3,300 mm X-axis pendulum operation: 600 mm Y-axis: 1,240 mm Work table: 8 ATS workpiece supports, each with 3 vacuum cups 8 rear workpiece stops, retractable via program, integrated in each support 8 workpiece stops, 670 mm from rear, integrated in each support 2 + 2 lateral workpiece stops 4 removable center stops 6 pneumatic lifting rails, retractable via program, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups EPS (Electronic Positioning System) Automatic central lubrication Division of the vacuum system into 2 separate working zones in X direction Auxiliary vacuum system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 m³/h Machining head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, each individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, 120 mm diameter fixed in X direction Grooving saw, 120 mm diameter fixed in Y direction Routing spindle 13.2 kW (11 kW S1-duty), HSK 63 F Mounted on Z1 axis Speed range 1,000–24,000 rpm Right and left rotation C-axis 360 degrees for aggregate adapters Cleaning nozzle for cleaning the milled edge prior to the edge banding operation Tool magazine for 16 tools Hfsdpfexraimox Akvsn Edge banding unit suitable for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360° infinite rotation Glue application for hot melt adhesive Double pressure roller, exchangeable and disconnectable Heating lamp for pre-heating edge material End trimming unit for cutting edge material at an 8-degree angle to the workpiece edge using a circular saw blade Technical Data: Plastic edge thickness 0.4–3 mm (*) Solid edge thickness 0.4–2 mm (*) (Best results are achieved using wood edges with primer, 0.4–1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. internal radius 18 mm, for edge thickness below 1 mm Min. internal radius 30 mm, with edge thickness 2 mm Minimum panel size for edging 300 x 300 mm Minimum internal cutout size for edging 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine, this solution restricts pendulum operation. Roll diameter of edge material: 800 mm Safety features: * Pressure-sensitive mats in front of the machine * Protective fence on the right with access door No tools included Control: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Aggregates: - Flush/Radius milling aggregate - Combination unit profile/flat scraper blade - Sawing aggregate

Kondisi: bekas, Tahun pembuatan: 2007, Mesin bekas Tahun pembuatan: 2007 Perlengkapan dan data teknis: Sistem nesting dengan meja raster Ukuran pengerjaan: - X: 5000 mm - Y: 1240 mm - Z: 135 mm Lintasan gerak: - X: 5665 mm - Y: 1650 mm - Z: 325 mm dengan unit milling 7933: - Motor 11 kW (S6) - HSK 63 - pendingin air dengan sumbu C dengan penukar alat tipe piringan 18 posisi dengan pompa vakum 250 m³ dengan unit pengoperasian manual dengan pelumasan sentral dengan sistem pelumasan minimum Hfjdpfxjzk Nvgj Akven Ketersediaan: segera Lokasi: Röllbach

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, Area kerja X: 3050 mm Area kerja Y: 1250 mm Area kerja Z: 180 mm Elektro spindel 9,5 kW Jumlah mata bor untuk pengeboran vertikal: 12 Jumlah mata bor untuk pengeboran horizontal X: 4 Jumlah mata bor untuk pengeboran horizontal Y: 2 Mata pisau untuk membuat alur searah X Pengganti alat dengan 4 posisi Pengganti alat belakang dengan 10 posisi Meja kerja dengan 6 rel, 6 meja TVN dengan pengisap vakum Pompa vakum dengan kapasitas 90 m³/jam Perangkat lunak: Xilog Maestro Hsdpfsy Tb Ezex Akvefn Perangkat laser untuk penentuan posisi Panel kontrol Berat sekitar 2750 Kg. Tidak termasuk unit tambahan!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Area kerja X: 3280 mm Area kerja Y: 1250 mm Spindel elektrik Jumlah mata bor untuk pengeboran vertikal: 12 Jumlah mata bor untuk pengeboran horizontal X: 4 Jumlah mata bor untuk pengeboran horizontal Y: 2 Mata pisau untuk membuat alur searah X Pengganti alat otomatis tipe revolver dengan 8 posisi Pengganti alat linear dengan 10 posisi di sisi kanan 1 motor frais tambahan dengan 2 keluaran Meja kerja dengan 6 rel Hfodpfxozwgkbe Akvjn Perangkat lunak pemrograman: Xilog Plus Panel kontrol 1 pompa vakum dengan kapasitas 90 m3/jam Jaring pengaman Berat perkiraan: 2500 Kg Tersedia mulai November 2026

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Area kerja X: 3200 mm Area kerja Y: 1450 mm Spindle elektrik 4 sumbu Jumlah mata bor untuk pengeboran vertikal: 10 Jumlah mata bor untuk pengeboran horizontal X: 4 Jumlah mata bor untuk pengeboran horizontal Y: 2 Mata pisau untuk alur dalam arah X Unit penguncian horizontal dengan dua saluran yang terpasang secara permanen Pengubah alat melingkar dengan sekitar 16 posisi Meja kerja dengan 6 palang Perangkat lunak: Biesse bSolid Pompa vakum Becker Picchio 2200 dengan kapasitas 90 m3/jam Alas keselamatan Jaring pelindung samping Berat sekitar 3420 Kg. Hanya 3763 jam penggunaan spindle elektrik Hfodpfx Aszm Nbhskven 38 jam untuk pengeboran dan 1100 jam untuk motor horizontal untuk membuat lubang kunci pintu Tersedia pada akhir tahun 2026

Kondisi: bekas, Tahun pembuatan: 2018, Numerical control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia – IoT connectivity Office control Working area X-axis: 3,228 mm Working area Y-axis: 1,580 mm Working area Z-axis: 200 mm with suction cups H74 mm Working area Z-axis: 245 mm with suction cups H29 mm No. 8 adjustable ATS panel support rails Hjdpfeugpwnjx Akvofn Pneumatic clamping installation, divided into two Y zones No. 6 pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for rails Suction cup setup assistant No. 1 electrospindle (pantograph) with 4 axes, automatic tool changer, 13 kW motor (17.4 HP), liquid cooling, HSK cone connection, 20,000 rpm Automatic tool changer with 16 positions on the X-axis carriage Independent Tesa drilling spindles BH17 are arranged as follows: No. 5 independent spindles for vertical drilling in the X direction No. 5 independent spindles for vertical drilling in the Y direction No. 4 spindles for horizontal drilling in the X direction No. 2 spindles for horizontal drilling in the Y direction No. 1 blade integrated into the drilling head, 120 mm diameter (usable cut 25 mm) GU60L gluing unit for EVA adhesive with premelter – edge pressure system with double rubberized roller for spokes, max. inner diameter 30 mm and sensor for edge joint – 500 ml glue pot mounted on glue roller – edge preheating lamp – edge feed system – edge trimming system – option for manual edge insertion Plastic edge thickness: 0.4 to 3 mm Wood edge thickness: 0.4 to 2 mm Laminate edge thickness: 0.4 to 1.2 mm Maximum edge width: 65 mm Workpiece thickness: 10 to 60 mm Minimum machinable internal radius with edging: 30 mm Maximum external radius for edges (proportional to edge thickness and stiffness): * 10 mm with up to 1 mm edge thickness * 20 mm with 2 mm edge thickness * 30 mm with 3 mm edge thickness Minimum size of edged panel: 300 x 300 mm Minimum internal diameter for edges: 350 mm with plastic edges less than 1 mm thick and panel max. thickness 18 mm Edge magazine with 2 positions in the safety enclosure for edges up to max. thickness 65 mm Finish additive cleaning station with automatic dispensing of special cleaning fluids and cleaning cycle No. 1 unit for rounding/contouring edges No. 1 EF60A combination unit trimmer/scraper Perimeter safety fence Chip extraction system with motorized conveyor Liquid cooling system Automatic lubrication system No. 1 vacuum pump, 250 m³/h TECHNICAL DATA TO BE CONFIRMED

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Die Format4 creator 950 in extensive configuration variants – your CNC machine for individual challenges in woodworking. Efficient CNC machining at a fair price – this principle is at the heart of the creator machine series. All models feature attractive equipment with the latest CNC technology and can be customized to meet specific requirements with additional options. The creator 950 is not just a simple and safe entry into the world of CNC, but also helps to relieve your main CNC machining centers. Your Benefits at a Glance: • Powerful CNC technology in just 5 m² of floor space • All-inclusive: 4-sided formatting as standard • Ready to go: Maximum productivity without setup times • No need for suction cup or console positioning • Suitable from interior fittings to room doors • Traditional top-side machining – easiest loading • Intuitive control via operator terminal • User-friendly software • Optimal extraction performance • High-end at the best price, in every configuration • Cabinet assembly with Lamello Clamex-P Optional Equipment: C19 2nd positioning cylinder for long workpieces C71 Folding support tables, front+rear – roller table C198 Pick-up station for tool and aggregate change C200 4-position linear changer for aggregates C233 Bracket for crane transport C490 F4design (incl. 3-axis post-processor) 800 E-Learning F4Design Working Area Creator: Axis Travel X= 1475 mm (clamp) Y= 1550 mm Z= 225 mm Working Area X= 3500 mm (infinite) or max. 130 kg load Y= 950 mm Hfedpeu Eg A Usfx Akvjn Z= 80 mm max. workpiece thickness Equipped with: High-performance PC 24" LED colour display Keyboard, mouse, and mouse pad 1 USB interface

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Penandaan CE, PUSAT PERMESINAN DAN EDGE-BANDING CNC, IMA BIMA 410 V SPESIFIKASI UMUM: Dimensi kerja efektif: 4000mm x 1200mm x 100mm Kecepatan maks. sumbu X: 100 m/menit Kecepatan maks. sumbu Y: 100 m/menit Kecepatan maks. sumbu Z: 25 m/menit 2 area kerja 8 batang geser SCHMALZ 23 cangkir vakum SCHMALZ 4 pengangkat panel Pompa vakum SIEMENS UNIT MILLING: Terletak di kiri jembatan bergerak 10 HP, 0-20.000 rpm dengan INVERTER Sumbu C 360° Pendinginan cairan Pergantian alat otomatis, tipe koneksi HSK F63 Penyimpanan rotari untuk alat berukuran besar, 12 posisi UNIT BORING pada X: Terletak di kiri jembatan bergerak 7 spindle bor vertikal independen Penggerak sabuk bergerigi berkecepatan tinggi, 9000 rpm Motor independen UNIT BORING pada Y: Terletak di kiri jembatan bergerak 5 spindle bor vertikal independen Penggerak sabuk bergerigi berkecepatan tinggi, 9000 rpm Motor independen UNIT EDGE-BANDING: Terletak di kanan jembatan bergerak Ganda penyimpanan edge-band Hsdpfxszc E A Is Akvjfn Pergantian edge-band otomatis Unit lem hot melt Gergaji untuk pemotongan edge-band sesuai ukuran Agregat trimming atas/bawah Ganda agregat pemotong sisa edge dan lem PROGRAMMER NUM KONTROLER IMATRONIC SOFTWARE IMAWOP Perlindungan keamanan: tikar pengaman, pintu pembuka tertunda, dll. Kesesuaian standar keamanan CE SEPENUHNYA SUDAH DICEK, SIAP DIGUNAKAN

Kondisi: baik (bekas), BACCI DOUBLE JET + KUKA robot The BACCI DOUBLE JET with KUKA robot is a highly advanced, automated CNC machining centre designed for the processing of wood and wood-based materials. The KUKA robot works in conjunction with the machine’s integrated feeder to automatically supply material. This significantly increases efficiency and minimises manual intervention. After milling and sanding, the robot automatically removes the finished parts and places them onto pallets. This optimises production logistics and enables uninterrupted operation without the need for manual reloading. Hfodjxr Dcwepfx Akvsn This system ensures seamless integration of the robot with the BACCI DOUBLE JET, which is equipped with two machining heads and twelve interpolated axes, allowing for simultaneous and precise machining of components. The automated loading and unloading of materials, together with the integrated feeder system, increase efficiency and production repeatability, reduce labour costs, and improve operator safety. The machine is primarily used in the furniture and joinery industry, where high standards of quality and efficiency are required.

Kondisi: baik (bekas), BACCI DOUBLE JET + KUKA robot Hedsxr Dduopfx Akvjfn The BACCI DOUBLE JET with KUKA robot is a highly advanced, automated CNC machining centre designed for the processing of wood and wood-based materials. The KUKA robot works in conjunction with the machine’s integrated feeder to automatically supply material. This significantly increases efficiency and minimises manual intervention. After milling and sanding, the robot automatically removes the finished parts and places them onto pallets. This optimises production logistics and enables uninterrupted operation without the need for manual reloading. This system ensures seamless integration of the robot with the BACCI DOUBLE JET, which is equipped with two machining heads and twelve interpolated axes, allowing for simultaneous and precise machining of components. The automated loading and unloading of materials, together with the integrated feeder system, increase efficiency and production repeatability, reduce labour costs, and improve operator safety. The machine is primarily used in the furniture and joinery industry, where high standards of quality and efficiency are required.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Area kerja X: 6000 mm Area kerja Y: 1400 mm Elektro-spindle dengan 4 sumbu, daya 16 kW Mata gergaji terpasang secara permanen Unit pengunci terpasang secara permanen Mata bor untuk pengeboran vertikal: 18 Mata bor untuk pengeboran horizontal X: 6 Mata bor untuk pengeboran horizontal Y: 2 Pengganti alat Pick-Up dengan 1 posisi Hfjdpfxjy Um Nze Akven Pengganti alat linear dengan 16 posisi Pengganti alat linear dengan 6 posisi Pengganti alat melingkar dengan 18 posisi Meja kerja dengan 10 palang Perangkat pengunci untuk rangka WS10 “MultiClamp” Perangkat lunak: Campus Panel kontrol manual untuk kendali jarak jauh Pompa vakum 250 m3/jam Alas keselamatan Termasuk 2 unit (1 Vario NC dan 1 dengan 4 saluran horizontal) dan cangkir vakum Hanya 943 jam kerja Tersedia pada bulan Februari 2027

Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), Biesse Rover 22 CNC machining center Year of manufacture: 2001 SN 07498 Working area 4 axes X-axis 3060 mm Y-axis 1080 mm Z-axis 155 mm 6 consoles with 18 vacuum cup holders 4 pneumatic Bakelite bars for lifting panels Vertical electrospindle 7.5 kW with automatic tool changer, ISO 30 taper Automatic tool changer with 7 positions on the working head Drilling unit with 20 spindles arranged as follows: 7 vertical in X-axis 7 vertical in Y-axis 4 horizontal in X-axis 2 horizontal in Y-axis Hfedeggxihopfx Akvsn Grooving saw 120 mm Safety tread mats 110 m³ / h vacuum pump CE marked Weight: 3,500 kg Technical data subject to change

Kondisi: bekas, Tahun pembuatan: 2005, Data Teknis - Area pemesinan: 2500x1000 mm - Jarak tempuh sumbu X: 2980 mm - Jarak tempuh sumbu Y: 1280 mm - Jarak tempuh sumbu Z: 200 mm - Kecepatan yang dapat diprogram pada sumbu X: 25 m/menit - Kecepatan yang dapat diprogram pada sumbu Y: 30 m/menit - Kecepatan yang dapat diprogram pada sumbu Z: 22,5 m/menit - Kecepatan vektor: 40 m/menit - 16 spindel 4000 RPM, 2,2 kW (10 vertikal dan 6 horizontal) - Spindel elektrik dengan 6,6 kW, 12000 - 18000 RPM, HSK-63 - Majalah perkakas samping dengan 7 posisi - Ukuran yang dibutuhkan (PxLxT): 6970x3000x2680 mm - Berat sekitar 3295 kg Hedezuxhtopfx Akvefn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Area kerja X: 3640 mm Area kerja Y: 1342 mm Jarak pergerakan benda kerja: 180 mm Spindle elektrik sumbu C dengan daya 12 kW, dudukan ISO30 Jumlah mata bor untuk pengeboran vertikal: 24 Jumlah mata bor untuk pengeboran horizontal X: 6 Jumlah mata bor untuk pengeboran horizontal Y: 4 Mata gergaji untuk pembuatan alur searah X Pengganti alat revolver dengan 12 posisi Meja kerja dengan 6 rel dengan EPS, penempatan rel otomatis menggunakan vakum Sabuk konveyor serpihan 1 Pompa vakum dengan kapasitas 90 m3/jam Hjdpfozmff Nox Akvjfn Alas keselamatan Berat sekitar 4000 Kg. Termasuk 3 unit tambahan (untuk pembukaan pintu, anuba, dll.), vakum, dan beberapa penjepit Uniclamps Hanya 1406 jam penggunaan untuk spindle elektrik 4 sumbu, dan 831 jam untuk mesin bor Tersedia mulai Januari 2027

Kondisi: bekas, Tahun pembuatan: 2008, PC-based numerical control with XILOG PLUS software Mobile handheld console with command functions X-axis working area: 4400 mm Y-axis working area: 1360 mm Z-axis working area: 180 mm Hfjdjpvai Dspfx Akvsn Z-axis travel: 200 mm No. 2 working supports in X No. 8 manually adjustable panel support rails with positioning LEDs No. 3 vacuum suction cups for panel holding on each rail No. 4 pneumatic Bakelite bars for panel lifting (assists with loading and unloading) No. 1 vertical electrospindle with vector axis and automatic tool change, HSK 63 taper Automatic tool changer with 12 positions on the working head Drilling unit composed as follows: No. 8 vertical spindles on X axis No. 5 vertical spindles on Y axis No. 4 horizontal spindles on the X axis No. 2 horizontal spindles on the Y axis Safety system with bumper system on the operator head No. 1 vacuum pump 100 m3/h Automatic lubrication

Kondisi: bekas, Tahun pembuatan: 2014, de2hu Hjdpfx Aexw Ty Nokvsfn

Kondisi: bekas, Tahun pembuatan: 2009, Maximum workpiece length: 4,500 mm Milling spindle: 1 unit Main motor: 20 kW Control: Siemens Weinig Conturex 2 C 114 ----- Working width: 40–260 mm Working height: 25–110 mm 2 x PowerGrip clamping table, 2 x 2,280 mm ----- Workpiece length: 200–4,500 mm Machining of workpieces over 2,700 mm in length is carried out via a follow-on/secondary cycle. Main spindle 1: ----- Motor with brake: 20 kW HSK 63F Speed electronically adjustable: 2,000–18,000 rpm Hodpfx Akewunwyevsfn Max. tool length from reference plane HSK 63 F: 290 mm With C-axis Tool magazine: ----- Number of positions: 30 Slot pitch: 100 mm Multi-spindle drilling head, permanently installed ----- For horizontal and vertical drilling and milling operations without tool change ----- Price ex location Prices for dismantling and loading onto customer’s truck, domestic and international transport, reassembly, commissioning, and, if required, engineering of new profiles upon request! Including used tools (drawings available on request!): ----- Wood: IV 68, 78, 88, inward and outward opening, with attached weather bar Wood-aluminium: IV 68/68, 78/78, 87/68, 97/78 Lift-slide doors IV 68 and 78 Entrance doors IV 68 and 78 Pivot windows Corner connection: counter/dowel Technical data according to manufacturer—no guarantee! Detailed technical description available on request!

Kondisi: bekas, Tahun pembuatan: 2016, panjang benda kerja maks. 4500 mm Spindel frais 1 buah Motor utama 19,2 kW Pusat pemesinan CNC MASTERWOOD 4 WIN 2.0 dengan sistem pemuatan dan pembongkaran otomatis Hfedpezn Ahwsfx Akven ----- Dirancang khusus untuk produksi jendela kayu dan pintu yang efisien dan fleksibel. KEUNGGULAN: - berbagai majalah perkakas untuk penataan perkakas yang optimal - pemuatan simultan dengan hingga 6 benda kerja - sistem penjepitan yang dipatenkan untuk pemesinan benda kerja yang optimal - meja kerja yang dikendalikan CNC dengan pemosisian otomatis palang dan penjepit - Penjepitan otomatis untuk peralihan antara pemrosesan profil luar dan dalam - Perangkat lunak konstruksi jendela TERINTEGRASI, artinya mesin tidak harus (tetapi tentu saja bisa) dikendalikan dari kantor dengan perangkat lunak industri eksternal. - Motor yang kuat dengan 19,2 kW HSK-63 E - Konveyor pemuatan dan pembongkaran - Meja tambahan untuk pembuatan lengkungan dan pemrosesan daun pintu Minta penawaran dan buktikan sendiri keunggulan rasio harga-kinerja yang tak tertandingi ini! VIDEO dari mesin yang serupa terlampir! Dijual atas nama pelanggan Spesifikasi teknis dari pelanggan (spesifikasi teknis sesuai dengan produsen - tanpa jaminan!)

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 380 V, frekuensi input: 50 Hz, SPESIFIKASI TEKNIS: Area kerja (x, y, z): 2900 x 1130 x 110 mm 6 balok kerja vakum, masing-masing dengan 3 cup hisap Pompa vakum BECKER 90 m³ Lemari listrik terpisah + konsol kontrol Perangkat lunak: BIESSEWORKS Karpet pengaman Hsdezfi H Uepfx Akvofn GRUP BOR BH 17L Jumlah mata bor vertikal: 10 Jumlah mata bor horizontal: 2 + 2 pada sumbu X, 1 + 1 pada sumbu Y 1 grup pisau untuk alur pada sumbu X GRUP FREIS: Elektromotor spindle 7 kW – ISO30 Penukar alat dengan 10 posisi

Kondisi: bekas, Tahun pembuatan: 2013, Machining center with automatic robot for loading and unloading panels Numerical control Biesse XP600 with graphical interface software Biesse Works ADVANCE – machine and office version WRT technology (Windows Real Time): The machine control logic is processed directly on the PC and not on a dedicated special device Working area in X-axis: 6200 mm Working area in Y-axis: 1552 mm Working range in Z-axis: 180 mm Z-axis travel: 235 mm No. 2 working fields in X-axis Bar worktable / Console No. 10 EPS electronically adjustable bars for suction pad holders 8 pneumatic Bakelite rods for panel lifting – loading/unloading aid No. 4 electronically adjustable EPS suction pads per bar with vacuum seal for panel clamping during machining No. 1 vertical electrospindle with automatic tool changer, motor 12 kW – 12000 rpm – flange for aggregates – C-axis vector ready Automatic tool change system with 12 places – mounted on machine head Drilling head BH35L with spindle arrangement as follows: - No. 14 vertical in X-axis Hfsdpfxskvrxue Akvjn - No. 10 vertical in Y-axis - No. 6 horizontal in X-axis - No. 4 horizontal in Y-axis Independent saw blade for grooving in X-axis – diameter 120 mm Carpet front protection and safety system Perimeter safety fence Automatic lubrication system Machine-controlled cooling and cleaning system with air conditioner Vacuum pump mc/h 250 Kuka industrial robot with 6 articulated axes with point-to-point positioning Independent operating panel Panel alignment table Barcode reader on robot arm Panel feed system via: * 1 motorized roller conveyor for preloading panel stacks * 1 translating motorized roller conveyor * 1 motorized roller conveyor for unloading panel stacks Technical data: * Type: KR210-2 * Number of axes: 6 * Permissible rated load: 210 kg * Machine weight: 1267 kg * Noise level: 75 dB * Installed power: 25.8 kW * Panel dimensions – min/max length: 300/3000 mm * Panel dimensions – min/max width: 180/1500 mm * Panel dimensions – min/max thickness: 8/60 mm * Max. panel weight: 90 kg

Kondisi: bekas, nomor mesin/kendaraan: 008205, Arbeitsbereich Achse X: 4250 mm Arbeitsbereich Achse Y: 1320 mm Arbeitsebene: Mit Vakuum-Konsolenauflagen Leistung Haupt-Spindel: 11 KW Anz. kontrollierte Achsen: 4 Achsen Anzahl Bohrspindeln: 31 Hjdpfjx A Th Rsx Akvsfn Anzahl Werkzeugplätze: 22

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Used CNC Machining Center Manufacturer: IMA Model: BIMA 300 125/430 Year of manufacture: 2008 4-axis CNC machining center with console table 8 manually movable supports in X direction, 3 vacuum cups per console, vacuum pump 90 m³/h vacuum connector for templates LED display for vacuum cup position indication Working area X: 200 – 4300 mm Working area Y: 0 – 1400 mm (milling/drilling), Working area Z: 12 – 125 mm (clearance 150 mm) Additional central stop rail 14 vertical drilling spindles + 6 horizontal Horizontal drilling and grooving saw unit, swivels 90° Milling spindle 7.5 kW up to 18,000 rpm with C-axis, 360° interpolation, liquid circulation cooling – 18-position tool changer on y-support, traversing Edgebanding unit VT 100, 4-sided/all-round – swiveling range 740 degrees with dual-roll magazine, automatic granulate feed Hodpfx Akey Nzw Nevjfn Adapter units: – Saw, fixed at 90° – 4-spindle crosshead Control: ICOS open 231 with 17″ TFT UPS ImaWop 10.0 incl. MDE and production list software Safety fence on right side and front pressure-sensitive mats; rear: wall installation or separate safeguarding required

Kondisi: bekas, Tahun pembuatan: 2007, sharp-6axe-doubletable-description Hedsxxh Haopfx Akvsfn

Kondisi: bekas, Tahun pembuatan: 2011, Panjang benda kerja maks. 4100 mm Spindel frais 8 buah Motor utama 16 kW Pengendali SIEMENS Proses kerja: Lini produksi jendela kayu ----- Penjualan atas pesanan pelanggan, diambil dari lokasi. Peralatan masih digunakan dan dapat diperiksa! Peralatan terdiri dari: Pos. 1: Sabuk pengumpan ke mesin serut (mesin serut TIDAK termasuk, dapat dibeli secara opsional) Pos. 2: Working Process Sapiens, buatan tahun 2011 (pemotongan frais dan pengeboran pada sisi ujung) - Spindel 1: 10 kW, HSK-E63, sumbu A / C - Spindel 2: 10 kW, HSK-E63, sumbu A / C - Spindel 3: 16 kW, HSK-E63, sumbu C - Spindel 4: 16 kW, HSK-E63, sumbu C Hfjdpfx Akszughuevsn Pos. 3: Sistem transportasi ke LOGOS SCH Pos. 4: Working Process LOGS SCH, buatan tahun 2008 (pemotongan frais dan pengeboran pada sisi ujung dan sisi panjang) - Spindel 1: 16 kW, HSK-E63 - Spindel 2: 16 kW, HSK-E63, sumbu C - Spindel 3: 10 kW, HSK-E63, sumbu C, sumbu A - Spindel 4: 3 kW, pemasangan tetap, untuk 2 alat (misalnya, untuk pemotongan frais seal, alur klip kayu-aluminium, dll.) - Pengumpul pusat dengan 95 slot pengganti alat Pos. 5: Konveyor keluar Deskripsi rinci dan tata letak tersedia berdasarkan permintaan! (Spesifikasi teknis sesuai dengan produsen - tanpa jaminan!)