Beli Pusat pemesinan horizontal dengan meja travers (untuk kayu) bekas (202)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 5.100 mm, jarak lintasan sumbu Y: 2.400 mm, tinggi benda kerja (maks.): 300 mm, jumlah slot dalam magazin alat: 12, EN-001-2024 Gbjdpowmczqjfx Ah Roi

Kondisi: bekas, SCM Tech 99L Machining Centre Gbsdpfx Ajtxdqcsh Rei Transport dimensions: 4,800 x 230 x 260 mm (height) - Weight: 2,800 kg

Kondisi: baik (bekas), Tahun pembuatan: 2003, nomor mesin/kendaraan: 0-201-22-4227, Fungsionalitas: fungsi terbatas, panjang benda kerja (maks.): 4.800 mm, tinggi benda kerja (maks.): 80 mm, jumlah slot dalam magazin alat: 18, daya motor spindle: 7.500 W, jumlah spindel: 2, pergerakan cepat sumbu Z: 30 m/menit, gerak cepat sumbu X: 80 m/menit, pergeseran cepat sumbu Y: 80 m/menit, kecepatan spindel (maks.): 18.000 rpm, kecepatan spindel (min.): 18.000 rpm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Spindel utama dilengkapi dengan sumbu C dan ekstensi untuk agregat Flex 5. Area pemesinan X: 4800 mm Area pemesinan Y: 1300 mm Area pemesinan Z: 80 mm 8 konsol 1 unit pompa vakum Penukar alat otomatis 18 posisi berjalan Dudukan alat HSK 63 Kepala bor horizontal adaptor dengan 4 spindel tetap Kepala bor dengan 17 spindel Spindel tambahan dengan dudukan collet Probe pengukur Pelumasan oli otomatis terpusat Rel pengangkat untuk meja konsol Gbedpfxoxdxa Io Ah Rsi

Kondisi: sangat baik (bekas), Pusat pemesinan Morbidelli Author 444 4 sumbu 4400 x 1300 mm Gbodpfx Ahexpumbe Rei

Kondisi: sangat baik (bekas),

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995,

Kondisi: bekas, Tahun pembuatan: 1991, jarak pergerakan sumbu X: 2.800 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 40 mm, berat keseluruhan: 4.000 kg, Cone: PS25 CNC control Tria 6000 Gjdpfx Aheua Arfs Rjbi Motor power 5.5 kW 4 units available

Kondisi: bekas, Tahun pembuatan: 2017, Direct numerical control (NC HOPS) with Campus software Gbedpfx Ajwwiybjh Roi Working area X-axis: 3400 mm Working area Y-axis: 1600 mm Working area Z-axis: 300 mm Worktable with 6 adjustable rails Equipped with 3 suction cups per rail for holding the workpiece 1 electrospindle with 5 axes, 10 kW, with automatic tool changer, cone type HSK F63 Drilling head with 24 spindles as follows: - 12 vertical spindles (Y-axis) - 6 vertical spindles (X-axis) - 4 horizontal spindles (Y-axis) - 2 horizontal spindles (X-axis) Automatic tool change system with 18 positions – located at the rear of the machine Front guarding and safety system with mats and safety fences Automatic lubrication system Air conditioning unit for the control cabinet 1 vacuum pump

Kondisi: bekas, Tahun pembuatan: 2012, Integrated NC machining center for windows and doors consisting of: A) Automatic Loader Model “SP” Automatic Loader for Base SP No. 1 Moulder - Automatic loader consisting of: - Table with motorized belts - Automatic device for transferring parts from the buffer to the moulder loading area * Workpiece length min: 450 mm / max: 3200 mm * Workpiece width min: 40 mm / max: 230 mm * Workpiece thickness min: 40 mm / max: 120 mm * Work cycles: 10/min * Chain feed speed on table: 7 m/min * Loading table dimensions: 2800 x 2150 mm B) Automatic Moulder Model SUPERSET NT C 6 Position 1 = Planer spindle Position 2 = 1st right vertical spindle Position 3 = 1st left vertical spindle Position 4 = 1st top horizontal spindle Position 5 = 1st bottom horizontal spindle Position 6 = Bead recovery unit 2500 mm infeed height Feed speed: 6-36 m/min via inverter No. 1 - Motor power: 5.5 HP (4 kW) Horizontal pressure unit before the planer, pneumatically disengaged from panel Pneumatic disengagement from the control panel for the feed unit before the planer spindle Tandem infeed unit before the right vertical spindle with quick release Feed groups after the upper spindles to reduce trailing length from 620 mm to 450 mm Infeed guide with bearings for automatic feeders Electrical preparation for use of automatic loader Manual central lubrication Pump for lubricating the work table with automatic drive Facility for online integration with INTEGRA SYSTEM - Working table raised to 970 mm - Entry signal light - Piece counter Independent control panel POS. 1 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for 5.5 HP (4 kW) to 10 HP (7.5 kW) motors T-SET quick tool clamping system - Allows tool locking/unlocking simply using a pneumatic gun POS. 2 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for 5.5 HP (4 kW) to 10 HP (7.5 kW) motors Vertical spindle with 180 mm working length T-SET quick tool clamping system Electronic vertical positioning POS. 3 Gbodpsixxwmsfx Ah Roi High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for 5.5 HP (4 kW) to 10 HP (7.5 kW) motors High-precision spindle Vertical spindle with 180 mm working length T-SET quick tool clamping system Electronic horizontal positioning POS. 4 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for 5.5 HP (4 kW) to 10 HP (7.5 kW) motors Spindle speed: 8,300 rpm T-SET quick tool clamping system Electronic vertical positioning POS. 5 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for 5.5 HP (4 kW) to 10 HP (7.5 kW) motors Spindle speed: 8,300 rpm T-SET quick tool clamping system POS. 6 Bead recovery unit Includes: PRL allows automatic transition from planning to bead recovery and vice versa. - Working group with 30 mm spindle diameter, length 30 mm - Electronic horizontal positioning - Electronic vertical positioning - Hardware and PLC modifications for axis management - Tandem output and modifications.

Kondisi: bekas, Tahun pembuatan: 2006, Numerical control XP 600 Working area X-axis: 3,060 mm Working area Y-axis: 1,140 mm Working area Z-axis: 160 mm Number of work zones: 2 Bar worktable 6 adjustable bars for suction cup support Number of pneumatic Bakelite bars for panel lifting: (?) 2 adjustable suction cups per bar with vacuum seal for securing the panel during machining 1 vertical electrospindle with C-axis, 12 kW motor Gjdpfxev Aacfe Ah Rebi Tool change system with 10 positions – located on the machine drill head, cone type ISO 30 Drill head BH19L with 18 spindles, arranged as follows: - 7 vertical spindles on the X-axis - 6 vertical spindles on the Y-axis - 4 horizontal spindles on the X-axis - 2 horizontal spindles on the Y-axis - 1 independent saw blade unit for grooving in the X-axis Front photocell guard and safety system Automatic lubrication system (?) Air conditioning system for cooling and cleaning the machine control panel Vacuum pump: 250 m³/h TECHNICAL DATA TO BE VERIFIED

Kondisi: bekas, Tahun pembuatan: 2013, Machining center with automatic robot for loading and unloading panels Numerical control Biesse XP600 with graphical interface software Biesse Works ADVANCE – machine and office version WRT technology (Windows Real Time): The machine control logic is processed directly on the PC and not on a dedicated special device Working area in X-axis: 6200 mm Working area in Y-axis: 1552 mm Working range in Z-axis: 180 mm Z-axis travel: 235 mm No. 2 working fields in X-axis Bar worktable / Console No. 10 EPS electronically adjustable bars for suction pad holders 8 pneumatic Bakelite rods for panel lifting – loading/unloading aid No. 4 electronically adjustable EPS suction pads per bar with vacuum seal for panel clamping during machining No. 1 vertical electrospindle with automatic tool changer, motor 12 kW – 12000 rpm – flange for aggregates – C-axis vector ready Automatic tool change system with 12 places – mounted on machine head Drilling head BH35L with spindle arrangement as follows: - No. 14 vertical in X-axis - No. 10 vertical in Y-axis - No. 6 horizontal in X-axis - No. 4 horizontal in Y-axis Independent saw blade for grooving in X-axis – diameter 120 mm Carpet front protection and safety system Perimeter safety fence Automatic lubrication system Machine-controlled cooling and cleaning system with air conditioner Vacuum pump mc/h 250 Kuka industrial robot with 6 articulated axes with point-to-point positioning Independent operating panel Panel alignment table Barcode reader on robot arm Panel feed system via: * 1 motorized roller conveyor for preloading panel stacks * 1 translating motorized roller conveyor * 1 motorized roller conveyor for unloading panel stacks Technical data: * Type: KR210-2 Gsdpokvrxuofx Ah Rebi * Number of axes: 6 * Permissible rated load: 210 kg * Machine weight: 1267 kg * Noise level: 75 dB * Installed power: 25.8 kW * Panel dimensions – min/max length: 300/3000 mm * Panel dimensions – min/max width: 180/1500 mm * Panel dimensions – min/max thickness: 8/60 mm * Max. panel weight: 90 kg

Kondisi: bekas, Tahun pembuatan: 2008, PC-based numerical control with XILOG PLUS software Mobile handheld console with command functions X-axis working area: 4400 mm Y-axis working area: 1360 mm Gsdpjpvai Dsfx Ah Rebi Z-axis working area: 180 mm Z-axis travel: 200 mm No. 2 working supports in X No. 8 manually adjustable panel support rails with positioning LEDs No. 3 vacuum suction cups for panel holding on each rail No. 4 pneumatic Bakelite bars for panel lifting (assists with loading and unloading) No. 1 vertical electrospindle with vector axis and automatic tool change, HSK 63 taper Automatic tool changer with 12 positions on the working head Drilling unit composed as follows: No. 8 vertical spindles on X axis No. 5 vertical spindles on Y axis No. 4 horizontal spindles on the X axis No. 2 horizontal spindles on the Y axis Safety system with bumper system on the operator head No. 1 vacuum pump 100 m3/h Automatic lubrication

Kondisi: bekas, Tahun pembuatan: 2009, Biesse factory control system Gbedjw D Dhaspfx Ah Rsi Working area on the X-axis: 3500 mm Working area on the Y-axis: 1585 mm Stroke on the Z-axis: 350 mm 2 working zones Bar worktable 8 adjustable support bars 4 pneumatic Bakelite support bars for lifting the panel 3 adjustable suction cups per bar with vacuum seal for securing the panel during processing 1 four-axis vertical electrospindle (Vector) with automatic tool changer, HSK-type cone 10-position rotary tool change system on the working head 24-position chain tool change system—located at the rear of the machine Drilling head with vertical and horizontal spindles composed as follows: - 12 vertical spindles in the X direction - 12 vertical spindles in the Y direction - 6 horizontal spindles in the X direction - 4 horizontal spindles in the Y direction 1 independent saw blade for producing X-grooves Carpeted front protection and safety system Perimeter safety fencing Chip extraction system with motorized conveyor belt Conditioning system for cooling and cleaning the machine control Vacuum pump 250 m³/h TECHNICAL DETAILS TO BE VERIFIED

Kondisi: bekas, Tahun pembuatan: 2019, Numerical control with bSolid software. The multi-document software application in the Windows environment allows for the design of the finished product, process definition, work plan setup, simulation of machining operations on the 3D model of the machine, and generation of the necessary machine programs. bSolid – 3-axis machining bSolid – 5-axis machining module for surface operations using 5-axis units and interpolation movements across all 5 axes (X, Y, Z, C, B). The module includes the following commands: • 3D roughing and finishing operations assigned to surfaces • Extension or projection of toolpaths onto a curved surface • Machining on a plane • Following 2D or 3D curves with any tool type bSolid – 3D engraving bSolid – Import external formats Work areas: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H = 74 mm Z = 245 mm with modules H = 29 mm Clamping area in Y: * 1650 mm, with a thickness of up to 60 mm on modules with a height of 74 mm Gsdpfxjw D E A Ej Ah Rebi * 1600 mm, with a thickness over 60 mm on modules with a height of 74 mm. 10 ATS levels – 40 carriages. The system includes: • 2 aluminium bars (1 left/1 right) on which the lateral stops glide. • 10 aluminium work tables. The tables slide on hardened and ground linear guides with recirculating ball bearings. Locking on both linear guides, front and rear, is achieved by four pneumatic cylinders. Control is via a button in front of the working area. The carriages slide on steel guides positioned above the extrusion. Pneumatic locking system, divided into 2 locking zones along X. Automatic positioning (EPS) for work tables. “EPS” (Electronic Positioning System): Device for automatic NC-controlled positioning of work tables and carriages, including locking mechanisms to exclude possible operator errors. Rear row stop, 140 mm stroke Intermediate row stop, positioned at 405 mm, 140 mm stroke Front row stop, positioned at 1460 mm, 140 mm stroke 4 side stops with 140 mm stroke (2 right + 2 left) per system 2 additional side stops with 140 mm stroke (1 right + 1 left) Sensor to check whether the stops are lowered 12 clamps for holding narrow workpieces 6 loading aid bar lifters, for H = 74 mm module 5A configuration, for Rover B. Configuration for high productivity and flexibility thanks to two processing units (4 and 5 axis) and the option for simultaneous tool change. Includes axes and carriages for the movement of the main processing units. Comes with 2 inverters. Second Y-axis. Allows separation of front and rear Y carriages with independent drive. Both Y carriages reach a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 interface, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 operation • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 operation • Ceramic bearings • Clockwise and counterclockwise operation • Speed programmable by NC from 1,000 to 24,000 rpm • Release via pneumatic actuator using prismatic linear guide and recirculating ball bearings • Cover included for chip extraction with 6 positions ...

Kondisi: bekas, Tahun pembuatan: 2018, Numerical control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia – IoT connectivity Office control Working area X-axis: 3,228 mm Working area Y-axis: 1,580 mm Working area Z-axis: 200 mm with suction cups H74 mm Working area Z-axis: 245 mm with suction cups H29 mm No. 8 adjustable ATS panel support rails Pneumatic clamping installation, divided into two Y zones No. 6 pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for rails Suction cup setup assistant No. 1 electrospindle (pantograph) with 4 axes, automatic tool changer, 13 kW motor (17.4 HP), liquid cooling, HSK cone connection, 20,000 rpm Automatic tool changer with 16 positions on the X-axis carriage Independent Tesa drilling spindles BH17 are arranged as follows: No. 5 independent spindles for vertical drilling in the X direction No. 5 independent spindles for vertical drilling in the Y direction No. 4 spindles for horizontal drilling in the X direction No. 2 spindles for horizontal drilling in the Y direction No. 1 blade integrated into the drilling head, 120 mm diameter (usable cut 25 mm) GU60L gluing unit for EVA adhesive with premelter – edge pressure system with double rubberized roller for spokes, max. inner diameter 30 mm and sensor for edge joint – 500 ml glue pot mounted on glue roller – edge preheating lamp – edge feed system – edge trimming system – option for manual edge insertion Plastic edge thickness: 0.4 to 3 mm Wood edge thickness: 0.4 to 2 mm Laminate edge thickness: 0.4 to 1.2 mm Maximum edge width: 65 mm Workpiece thickness: 10 to 60 mm Minimum machinable internal radius with edging: 30 mm Maximum external radius for edges (proportional to edge thickness and stiffness): * 10 mm with up to 1 mm edge thickness * 20 mm with 2 mm edge thickness * 30 mm with 3 mm edge thickness Minimum size of edged panel: 300 x 300 mm Minimum internal diameter for edges: 350 mm with plastic edges less than 1 mm thick and panel max. thickness 18 mm Edge magazine with 2 positions in the safety enclosure for edges up to max. thickness 65 mm Finish additive cleaning station with automatic dispensing of special cleaning fluids and cleaning cycle No. 1 unit for rounding/contouring edges Godpeugpwnsfx Ah Rjbi No. 1 EF60A combination unit trimmer/scraper Perimeter safety fence Chip extraction system with motorized conveyor Liquid cooling system Automatic lubrication system No. 1 vacuum pump, 250 m³/h TECHNICAL DATA TO BE CONFIRMED

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, nomor mesin/kendaraan: 0-201-25-5219, Fungsionalitas: berfungsi sepenuhnya, frekuensi input: 50 Hz, jarak pergerakan sumbu X: 4.800 mm, jarak lintasan sumbu Y: 1.400 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Pengajuan penawaran mewajibkan pengambilan tepat waktu hingga akhir Agustus! DETAIL TEKNIS Ruang Gerak Jangkauan sumbu X: 4.800 mm Jangkauan sumbu Y: 1.400 mm Gedew Ekkkepfx Ah Rjbi DETAIL MESIN Data Listrik Tegangan suplai: 400 V Frekuensi: 50 Hz Jumlah fasa: 3 Arus nominal: 53 A Pengaman: 63 A Tegangan kontrol: 24 V Jenis arus masuk: arus tiga fasa PERLENGKAPAN Putaran dapat diatur tanpa tingkat Unit tepi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, nomor mesin/kendaraan: 0-250-15-0310, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 6.250 mm, jarak lintasan sumbu Y: 1.300 mm, jumlah slot dalam magazin alat: 9, gerak cepat sumbu X: 80 m/menit, diameter benda kerja (maks.): 60 mm, tech-specs-tr-001 Gjdpfx Ajxdw Tgoh Robi

Tahun pembuatan: 2008, Kondisi: diremaj di bengkel (bekas), nomor mesin/kendaraan: 22589, MC dengan meja melintang Model: Rover A3 30 Tahun: 2008 4 sumbu Gedpfx Aelu Hhcjh Robi Area kerja: x=3060 mm y=1260 mm z=150 mm 6 balok kerja L = 1200 tersedia pada Agustus 2023 Perkakas tidak termasuk

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 335 h, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.550 mm, jarak gerak sumbu Z: 250 mm, Perlengkapan: Port USB, Fully equipped machine, only 335 hours of operation additional tool holder, synchronized with the frame largest drill head with spindles discharge conveyor laser pneumatic pistons on the beam automatic lubrication Gbedpfxswinkpj Ah Rei

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, nomor mesin/kendaraan: 55/1-105 15501954 BAZ11V3, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 25.996 h, jarak pergerakan sumbu X: 6.566 mm, jarak lintasan sumbu Y: 1.800 mm, jarak gerak sumbu Z: 445 mm, jumlah slot dalam magazin alat: 24, kecepatan spindel (maks.): 6.500 rpm, No reserve price – guaranteed sale to the highest bidder! Machine already dismantled TECHNICAL DETAILS Workpiece dimensions for cutting (excluding cutter radius): 6,225 x 1,595 mm Travel X: 6,566 mm Travel Y: 1,800 mm Travel Z: 445 mm Clearance height, standard consoles – 1st stroke: 498 mm Clearance height, standard consoles – 2nd stroke: 598 mm Clearance height, Vario table – 1st stroke: 445 mm Clearance height, Vario table – 2nd stroke: 545 mm Speed Programmable vector speed: 142.0 m/min Speed X: 100 m/min Speed Y: 100 m/min Speed Z: 25 m/min Drilling unit Type: Drilling unit 7976, 24 spindles Drive power: 3.0 kW Gedpfxowvi Ico Ah Rebi Vertical spindles Number: 18, individually selectable Configuration: L-shape (10 on X-axis, 8 on Y-axis) Spindle pitch: 32 mm Max. drilling diameter: 35 mm Total drill length: 70 mm (from screw-in end, depending on panel thickness) Spindle stroke: 70 mm Rotation direction: alternating right-/left-hand Speed range (stepless): 1,000 – 6,500 rpm Connection: M10 thread – press fit 11 mm Horizontal spindles Number: 6 on X-axis: 2 double drilling spindles Spindle pitch (X-axis): 32 mm on Y-axis: 1 double drilling spindle Connection: M10 thread – press fit 11 mm Total drill length: 70 mm (from screw-in end) Consoles & suction cups (VarioTable) Number of consoles (automatic positioning): 6 Workpiece consoles (automatic, X-direction): 5, in fields A + D Suction cup holders per console (automatic, Y-direction): 3 Vacuum suction cups per holder: 1, 80 x 80 mm with plunger valve Suction cover per holder: 1 Loading aids: 4 Rear stop pin per console: 1 Note: Only 5 out of 10 consoles are working correctly Saw unit / interchangeable unit Central unit: Central gear 7955, for saws (mainly solid wood) Tool holder: HSK-F 63 Max. output speed: 6,750 rpm Number of spindles: 1 Max. saw blade diameter: 220 mm Saw blade bore: 30 mm Drive pins: 2 x Ø 6 mm Clamping cover: self-locking Lubrication: oil sump lubrication MACHINE DETAILS Operating hours: 25,996 h Number of power-on cycles: 965 x EQUIPMENT - Drilling unit with 24 spindles (vertical and horizontal) - VarioTable with automatically positionable consoles and suction cups - 4 loading aids - Central saw unit with HSK-F 63 interface - Saw blade holder for up to Ø 220 mm with oil sump lubrication - new pump installed - only 5 out of 10 consoles fully functional – long workpieces can still be securely supported - No tools included in the scope of delivery

Kondisi: bekas, nomor mesin/kendaraan: 007329, Area kerja sumbu X: 3200 mm Area kerja sumbu Y: 1850 mm Level kerja: Dengan penyangga konsol vakum Daya spindle utama: 15 kW Jumlah sumbu terkontrol: 3 sumbu Jumlah sumbu terkontrol: 3 sumbu Jumlah spindle bor: 31 Jumlah posisi alat: 10 Gedpfsxn Nfvex Ah Rjbi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, nomor mesin/kendaraan: 0-201-15-4101, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 535 mm, jarak lintasan sumbu Y: 535 mm, jarak gerak sumbu Z: 535 mm, kecepatan spindel (maks.): 24.000 rpm, diameter alat: 280 mm, Perlengkapan: konveyor serpihan, 5-axis machining center with chip conveyor! Gedoxhgpfjpfx Ah Rebi Placing a bid obligates you to collect the machine on time by 14.10.2025! TECHNICAL DETAILS Traverse Paths X-axis travel: 535 mm Y-axis travel: 535 mm Z-axis travel: 535 mm Feed Rate Feed rate X/Y direction: up to 60 m/min Feed rate Z direction: 30 m/min Spindle Head Spindle power: 12 kW Spindle speed: 1,500 – 24,000 rpm C-axis swivel range: -220 to +220° A-axis swivel range: ° Coolant temperature: 15 – 45°C Tool Magazine Tool holder: HSK-F63 Interface: HOMAG Interface 9-002-04-3360 Number of magazine slots: 18 Pitch circle diameter: 760 mm Maximum total tool holder weight: 90 kg Maximum weight per tool: 10 kg Tool diameter: 280 mm Maximum tool height: 320 mm Clamping Cylinder Lower clamping plates: 70 × 90 mm Upper clamping plates: 77 × 100 mm Piston rod diameter: 25 mm Clamping height above console: 100 mm Stroke – support cylinder: 55 mm Clamping force: 1,300 N Maximum workpiece height: 80 mm Return: manual Drilling Unit with Slotting Tool Drill tool speed: max. 6,000 rpm C-axis swivel range: ±360° Drill tool holder (rotating): Ø 11.55 mm Slotting tool holder (fixed): Ø 18.95 mm Weight (assembled): 3.5 kg Chip Conveyor Conveying height with inclined conveyor: 1.3 m Conveying height without inclined conveyor: 0.3 m Maximum scrap part size: 300 × 300 mm EQUIPMENT Chip conveyor Eagley Eye Laser Projector 40 tools Various additional accessories

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), Pee-Wee Model P24US Mesin Gulung Ulir Hidrolik untuk pengerolan in-feed atau thru-feed dengan dies thru-feed helikal Tekanan gulung maksimum: 24 ton Diameter gulung maksimum: 75mm Diameter gulung minimum: 5mm Lebar gulung maksimum: 200mm Diameter spindle penggulung: 69,85mm Diameter dies ulir maksimum: 210mm Kecepatan spindle variabel: 20 - 90 rpm Gbsdpfx Ajxl Ebheh Rei

Kondisi: baik (bekas), BIESSE ARROW ATS 5-AXIS CNC MACHINING CENTRE NC1000 Gbjdjukcy Eopfx Ah Rsi Machining head with revolver-type automatic tool changer BH39 drilling unit, 250m³/h vacuum pump (This machine was in operation for 10 years in a woodworking school)

Kondisi: diremaj di bengkel (bekas), 3-AXIS DRILLING & MILLING CENTER WITH FIXED ANGULAR GEAR, DOUBLE HORIZONTAL SPINDLES Brand: SCM Model: TECH Z 2 27 C Year: 2007 (Machine offered in working condition, overhauled, without warranty) TECHNICAL SPECIFICATIONS: - Working surfaces: Distance between side stops in X: 2650 mm Electrospindle travel in X: 2903 mm Electrospindle travel in Y: 1240 mm Vertical boring travel in Y: 1018 mm - Max. panel size for dual station machining: 1180 mm - Max. panel thickness: 180 mm - X-Y vector speed: 54 m/min - Z axis speed: 11.5 m/min - Z axis stroke: 200 mm - Main motor power: 2.2 kW (3 HP) - Spindle rotation speed: 4,000 rpm - Spindle taper fittings: M 10 - Machine weight: approx. 2,800 kg CONFIGURATION: WORKING TABLE 4 support beams for suction cups, L=1000 mm for automatic round suction cups with aluminum body (2 per beam) 2 additional universal supports H=25 mm 4 suction cup supports for contouring VACUUM PUMP capacity = 100 m3/h Centralized extraction conveyor Automatic centralized lubrication for X & Y axes Pneumatic loading support device for tables L=1000 mm MILLING: HSK 63 electrospindle uprated to 7.5 kW - Rotation speed 1500/24,000 rpm, managed by inverter - Right and left rotation selectable by CNC control - (1) HSK 63 cone with (straight) tool holder included - Collet not included (tools excluded) Rear automatic tool changer, 8 positions: R8L - Can hold 8 tools, each up to Ø 120 mm - Each tool holder station supports up to 4.5 kg - The total maximum weight of tools and related tool holders the "R8L" magazine can support is 22 kg HORIZONTAL MILLING UNIT WITH 2 OUTPUTS for milling and grooving: - Rotation speed: 9000/18,000 rpm - Motor power: 3 kW (4 HP) - Milling tool (front output): max Ø 20 mm - Effective milling tool length (front output): 110 mm - Milling tool (rear output): max Ø 12 mm - Effective milling tool length (rear output): 80 mm - Saw blade: Ø 100 mm DRILLING: 12 independent spindles for vertical boring (7 in X direction and 5 in Y direction) 3 independent heads with 2 spindles each for horizontal boring: * 2 heads in "X" direction (64 mm pitch) * 1 in "Y" direction INTEGRATED OPERATOR UNIT for FIXED disc cutter for grooving in "X" direction - Disc cutter speed: 4000 rpm - Motor power: 2.2 kW - Disc cutter: max Ø 120 mm - Compressed air consumption: 150 nl/min Gsdpfx Ahsw E Hb Ss Rebi - Extraction port: Ø160 mm PC-OFFICE (Hardware configuration): - Operating system: Windows XP - 15" CRT color monitor - QWERTY keyboard - INTEL CELERON 2 GHz processor - 40 Gb hard drive - 128 Mb RAM - 3.5" floppy disk drive, 1.44 Mb - 52x CD-ROM drive (Machine offered in working condition, overhauled, without warranty)