Beli Pusat pemrosesan dengan meja travers bekas (179)

Kondisi: baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1000028154, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, trans_01 Bdsdoxdl H Uepfx Abkjk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.680 mm, jarak lintasan sumbu Y: 1.260 mm, jarak gerak sumbu Z: 150 mm, DETAIL TEKNIS Area kerja: 3.680 x 1.260 x 150 mm Motor frais: 1 unit, 8,5 kW (11,5 HP) Penukar alat: 1 gearbox otomatis berputar dengan 12 posisi Unit bor: 18 pengeboran vertikal, 8 horizontal, dan 1 bor gergaji "X" Bsdpfx Absxg Izajkedk Perangkat lunak: Kompatibel dengan DXF Standar keselamatan: Perlindungan BUMPER, standar CE Berat: 3.000 kg Catatan: Mesin memiliki masalah perangkat lunak dan tidak dilengkapi pompa. Estimasi biaya perbaikan masing-masing sekitar €3.000.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995,

Tahun pembuatan: 2010, Kondisi: baik (bekas), USED CNC BIESSE BREMA EKO 902 INSERT TECHNICAL DETAILS: 3-AXIS CNC MACHINING CENTER (X-Y-Z) Bdedpfx Abehknbrekjk - Full protection of the operating head and working area on the machine - Numerical control (controller) with BIESSE Works software running on Windows - Vertical positioning of panels, with 2 panel locking clamps - Panel feed (in X-axis direction, on lower support with rubber-coated wheels), movement (on X-axis) of the panel holding/fixing clamps WORKPIECE DIMENSIONS (WORKING DIMENSIONS): - Length: Min 160 mm / Max 3200 mm - Width: Min 35 mm / Max 900 mm - Thickness: Min 8 mm / Max 80 mm WORKING UNITS: - 1 vertical spindle (electrospindle) ER32 (4.5 KW) with inverter (up to 18,000 RPM) - 1 circular saw blade (for grooving) 120 mm diameter (fixed, X-axis) - 13 independent vertical drilling spindles (6 on X-axis + 7 on Y-axis) - 8 independent horizontal drilling spindles (3+3 on X-axis and 1+1 on Y-axis) - 1 boring unit for hinge drilling - Total installed power 20 KW AUTOMATIC DOWEL INSERTION UNIT ON BOTH SIDES WITH PRESSURE PUMP FOR GLUE APPLICATION.

Kondisi: bekas, Tahun pembuatan: 2019, Technical details in the attached .pdf document - X-axis longitudinal travel: 2700 mm - Effective X-axis travel (spindle only – unit A): 1900 mm - Effective X-axis travel (sander only – unit B): 2050 mm - Effective X-axis travel (milling cutter only – unit C): 2050 mm - Effective X-axis travel (chisel only – unit D): 1500 mm - Effective X-axis travel (saw blade only – unit E): 1750 mm - Effective X-axis travel (sander only – unit F): 1500 mm - Effective X-axis travel with all units: 1500 mm - Y-axis transverse travel: 380 mm - V-axis transverse travel: 720 mm - Z-axis vertical travel: 630 mm - B-axis travel (electrospindle): +/- 90° - A-axis rotation (rotary table/divider): infinite - Overall dimensions: 4000 x 3100 x 2500 mm Bdjdexdw D Eepfx Abkok - Installed power: 65 kW - Compressed air: 6 bar - Power supply: 380 Volt, 3-phase / 50 Hz.

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0-201-22-4204, gerak cepat sumbu X: 60 m/menit, pergeseran cepat sumbu Y: 60 m/menit, pergerakan cepat sumbu Z: 30 m/menit, produsen pengendali: Siemens, panjang benda kerja (maks.): 3.000 mm, lebar benda kerja (maks.): 1.150 mm, tinggi benda kerja (maks.): 80 mm, kecepatan rotasi (maks.): 18.000 rpm, jam operasional spindle: 1.000 h, daya motor spindle: 7.500 W, jumlah spindel: 1, jumlah slot dalam magazin alat: 12, tegangan masuk: 380 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Spindel utama dengan sumbu C Bjdpfexdxg Isx Abkjdk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0-250-15-0310, jarak pergerakan sumbu X: 6.250 mm, jarak lintasan sumbu Y: 1.300 mm, gerak cepat sumbu X: 80 m/menit, diameter benda kerja (maks.): 60 mm, jumlah slot dalam magazin alat: 9, tech-specs-tr-001 Bsdjxdw Tgopfx Abkjdk

Kondisi: bekas, Tahun pembuatan: 1992, Used machine Bdjdpfx Aowwnf Nobkek Year of manufacture: 1992 Working range: X-axis: 2310 mm, Y-axis: 628 mm, Z-axis: 90 mm Max. programmable feed rate: X-axis: 100 m/min; Y-axis: 75 m/min; Z-axis: 15 m/min Drill holder: Diameter 10 mm Spindle speeds: 4000 rpm Grooving saw: Diameter 120 mm Drilling spindles: 4 horizontal spindles in X, 12 vertical spindles in the X-line Operating air pressure: 6 bar Maximum compressed air consumption: 0.75 NL/cycle Installed power: max. 7.5 kW Vacuum pump capacity: 40 m³/h CNC: Monitor: Monochrome 9" Floppy disk drive PLC for machine cycle control Availability: short-term Location: Röllbach

Kondisi: baik (bekas), Pusat pemesinan HOMAG BAZ 723 58/18/FC Mesin portal CNC 4 sumbu dengan 2 meja geser dan unit edge banding Bedpfoxc Ir Rjx Abksdk

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, jam operasional: 270 h, Fungsionalitas: berfungsi sepenuhnya, panjang benda kerja (maks.): 3.715 mm, lebar benda kerja (maks.): 1.320 mm, tinggi benda kerja (maks.): 180 mm, berat keseluruhan: 6.060 kg, kecepatan spindel (maks.): 24.000 rpm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Mesin telah bekerja selama 270 jam operasi, data hampir baru: - penentuan posisi laser Data teknis: Merek: Busellato JET Master T 4 Bdedpfx Abjxawlbokek Data teknis: - Area kerja: 3715x1320 mm (X,Y) - Tinggi benda kerja: 180 mm - Daya mesin: 9,5 kW - Kecepatan maksimum: 24.000 rpm - Sumbu C: ada - Unit bor: dengan 19 buah mata bor - 1 unit gergaji - Majalah alat 16 slot - Tikar pengaman 3 bagian - Pelumasan sentral otomatis Kapasitas pompa vakum: (m3/jam) 244/286 Pembayaran dalam euro atau forint, harga net. Harga baru mesin: €125.675 Harga jual: €47.500 +36-30-9198-716

Kondisi: diremaj di bengkel (bekas), 3-AXIS DRILLING & MILLING CENTER WITH FIXED ANGULAR GEAR, DOUBLE HORIZONTAL SPINDLES Brand: SCM Model: TECH Z 2 27 C Year: 2007 (Machine offered in working condition, overhauled, without warranty) TECHNICAL SPECIFICATIONS: - Working surfaces: Distance between side stops in X: 2650 mm Electrospindle travel in X: 2903 mm Electrospindle travel in Y: 1240 mm Vertical boring travel in Y: 1018 mm - Max. panel size for dual station machining: 1180 mm - Max. panel thickness: 180 mm - X-Y vector speed: 54 m/min - Z axis speed: 11.5 m/min - Z axis stroke: 200 mm - Main motor power: 2.2 kW (3 HP) - Spindle rotation speed: 4,000 rpm - Spindle taper fittings: M 10 - Machine weight: approx. 2,800 kg CONFIGURATION: WORKING TABLE Bsdpfx Asw E Hb Sjbkedk 4 support beams for suction cups, L=1000 mm for automatic round suction cups with aluminum body (2 per beam) 2 additional universal supports H=25 mm 4 suction cup supports for contouring VACUUM PUMP capacity = 100 m3/h Centralized extraction conveyor Automatic centralized lubrication for X & Y axes Pneumatic loading support device for tables L=1000 mm MILLING: HSK 63 electrospindle uprated to 7.5 kW - Rotation speed 1500/24,000 rpm, managed by inverter - Right and left rotation selectable by CNC control - (1) HSK 63 cone with (straight) tool holder included - Collet not included (tools excluded) Rear automatic tool changer, 8 positions: R8L - Can hold 8 tools, each up to Ø 120 mm - Each tool holder station supports up to 4.5 kg - The total maximum weight of tools and related tool holders the "R8L" magazine can support is 22 kg HORIZONTAL MILLING UNIT WITH 2 OUTPUTS for milling and grooving: - Rotation speed: 9000/18,000 rpm - Motor power: 3 kW (4 HP) - Milling tool (front output): max Ø 20 mm - Effective milling tool length (front output): 110 mm - Milling tool (rear output): max Ø 12 mm - Effective milling tool length (rear output): 80 mm - Saw blade: Ø 100 mm DRILLING: 12 independent spindles for vertical boring (7 in X direction and 5 in Y direction) 3 independent heads with 2 spindles each for horizontal boring: * 2 heads in "X" direction (64 mm pitch) * 1 in "Y" direction INTEGRATED OPERATOR UNIT for FIXED disc cutter for grooving in "X" direction - Disc cutter speed: 4000 rpm - Motor power: 2.2 kW - Disc cutter: max Ø 120 mm - Compressed air consumption: 150 nl/min - Extraction port: Ø160 mm PC-OFFICE (Hardware configuration): - Operating system: Windows XP - 15" CRT color monitor - QWERTY keyboard - INTEL CELERON 2 GHz processor - 40 Gb hard drive - 128 Mb RAM - 3.5" floppy disk drive, 1.44 Mb - 52x CD-ROM drive (Machine offered in working condition, overhauled, without warranty)

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 0-201-22-4227, gerak cepat sumbu X: 80 m/menit, pergeseran cepat sumbu Y: 80 m/menit, pergerakan cepat sumbu Z: 30 m/menit, panjang benda kerja (maks.): 4.800 mm, tinggi benda kerja (maks.): 80 mm, kecepatan spindel (min.): 18.000 rpm, kecepatan spindel (maks.): 18.000 rpm, daya motor spindle: 7.500 W, jumlah spindel: 2, jumlah slot dalam magazin alat: 18, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Spindel utama dilengkapi dengan sumbu C dan ekstensi untuk agregat Flex 5. Area pemesinan X: 4800 mm Area pemesinan Y: 1300 mm Area pemesinan Z: 80 mm 8 konsol 1 unit pompa vakum Penukar alat otomatis 18 posisi berjalan Dudukan alat HSK 63 Kepala bor horizontal adaptor dengan 4 spindel tetap Kepala bor dengan 17 spindel Spindel tambahan dengan dudukan collet Probe pengukur Pelumasan oli otomatis terpusat Rel pengangkat untuk meja konsol Bedexdxa Iepfx Abkodk

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Processing center Rover 20 Working area: 2,893 x 950 mm, milling spindle with ISO30 tool holder, 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills as well as grooving saw, 6-position tool changer. The NC410 control featured a floppy disk drive and a color monitor, as well as basic, graphically assisted programming options. Additionally, the Rover 20 already enabled pendulum (dual-zone) machining. Dimensions: approx. 3,800 x 2,000 mm, height 1,600 mm Control cabinet: 950 x 700 x 1,300 mm Bdjdpfx Abelc Dwnjkjk Ex site

Kondisi: bekas, TIG welding machine Output: 220 Amp = 35% duty cycle Bdodpow Htywefx Abksk 160 Amp = 60% duty cycle 130 Amp = 100% duty cycle Current type: AC and DC Mains connection: 400 V, 50 Hz, 32 Amp plug - Infinitely variable power adjustment - High-frequency ignition - 2-stroke and 4-stroke operation - Water-cooled - 7.5 meter TIG hose package with hand torch - Shielding gas pressure regulator Required space (L x W x H): 900 x

Kondisi: bekas, Homatic PC 85 Power Control numerical control with WoodWop software Working area X-axis: 6000 mm Working area Y-axis: 1650 mm (up to 1750 mm in milling mode) No. 10 adjustable panel support rails for positioning suction cups Loading and unloading assistance system via 8 pneumatic bars on each support rail Each rail features adjustable Schmalz-type suction cups with vacuum seal for fixing panels during machining Suction cup positioning via laser system mounted on main head No. 1 vertical electrospindle with C-axis vector, automatic tool changer, HSK F63 taper, 11 kW Automatic tool changer with 18 positions located at the rear of the machine Drilling head with 27 spindles (4 kW) arranged as follows: - 11 vertical in X-axis - 6 vertical in Y-axis - 6 horizontal in X-axis Independent edge-banding unit with 360° rotation on the second Y-axis, equipped with glue pot and pre-melter for granular EVA adhesive Applicable edge bands: roll material PVC/ABS thickness 0.4 - 3 mm Maximum working height for trimming: 60 mm Maximum applicable edge height: 65 mm Minimum internal radius: 30 mm (depending on edge type) External radius depends on material used Rubber-coated pressure roller + additional rubber-coated pressure roller Panel preheating lamp Edge trimmer Bedpfx Ajl Ikyuebkedk No. 1 unit blade, diameter 200 mm (max.) No. 1 combined trimming and edge-drawing unit Edge tape holder magazine Front safety carpet and protection system Perimeter safety fence Chip extraction system with motorized belt Air conditioning unit for cooling and cleaning machine control system Automatic lubrication system Vacuum pump

Kondisi: baik (bekas), Tahun pembuatan: 2004, I am selling a 3-axis CNC machining centre Biesse Rover 24L with beam table, year of manufacture 2004. Configuration: - 3-axis main spindle HSD, recently fully overhauled, water-cooled RS1600 - Tool changer with 7 positions ISO30 mounted on head - 1x grooving saw in X-direction - Drilling unit: 14+4+2 drilling spindles - Usable working area: 4500 x 1330 mm Bdjdpfxoh Txlce Abkek - 2 working fields, 4 clamping zones - Centralised lubrication system (automatic) - Total installed power: 35 kW - XDNC 2.01 software with manual - Becker pump 250/300 m³/h, 5.5 kW - Additional vacuum for template work or supplementary clamping devices Good condition. Available immediately from stock. Repairs needed: Handles on the beam table, rotation of ISO30 magazine on head.

Kondisi: baik (bekas), BIESSE ARROW ATS 5-AXIS CNC MACHINING CENTRE NC1000 Machining head with revolver-type automatic tool changer BH39 drilling unit, 250m³/h vacuum pump (This machine was in operation for 10 years in a woodworking school) Bdodoukcy Espfx Abksk

Kondisi: bekas, Tahun pembuatan: 2012, Integrated NC machining center for windows and doors consisting of: A) Automatic Loader Model “SP” Automatic Loader for Base SP No. 1 Moulder - Automatic loader consisting of: - Table with motorized belts - Automatic device for transferring parts from the buffer to the moulder loading area * Workpiece length min: 450 mm / max: 3200 mm * Workpiece width min: 40 mm / max: 230 mm * Workpiece thickness min: 40 mm / max: 120 mm * Work cycles: 10/min * Chain feed speed on table: 7 m/min * Loading table dimensions: 2800 x 2150 mm B) Automatic Moulder Model SUPERSET NT C 6 Position 1 = Planer spindle Position 2 = 1st right vertical spindle Position 3 = 1st left vertical spindle Position 4 = 1st top horizontal spindle Position 5 = 1st bottom horizontal spindle Position 6 = Bead recovery unit 2500 mm infeed height Feed speed: 6-36 m/min via inverter No. 1 - Motor power: 5.5 HP (4 kW) Horizontal pressure unit before the planer, pneumatically disengaged from panel Pneumatic disengagement from the control panel for the feed unit before the planer spindle Tandem infeed unit before the right vertical spindle with quick release Feed groups after the upper spindles to reduce trailing length from 620 mm to 450 mm Infeed guide with bearings for automatic feeders Electrical preparation for use of automatic loader Manual central lubrication Pump for lubricating the work table with automatic drive Facility for online integration with INTEGRA SYSTEM - Working table raised to 970 mm - Entry signal light - Piece counter Independent control panel POS. 1 Bjdpfjixxwmsx Abkedk High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for 5.5 HP (4 kW) to 10 HP (7.5 kW) motors T-SET quick tool clamping system - Allows tool locking/unlocking simply using a pneumatic gun POS. 2 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for 5.5 HP (4 kW) to 10 HP (7.5 kW) motors Vertical spindle with 180 mm working length T-SET quick tool clamping system Electronic vertical positioning POS. 3 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for 5.5 HP (4 kW) to 10 HP (7.5 kW) motors High-precision spindle Vertical spindle with 180 mm working length T-SET quick tool clamping system Electronic horizontal positioning POS. 4 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for 5.5 HP (4 kW) to 10 HP (7.5 kW) motors Spindle speed: 8,300 rpm T-SET quick tool clamping system Electronic vertical positioning POS. 5 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for 5.5 HP (4 kW) to 10 HP (7.5 kW) motors Spindle speed: 8,300 rpm T-SET quick tool clamping system POS. 6 Bead recovery unit Includes: PRL allows automatic transition from planning to bead recovery and vice versa. - Working group with 30 mm spindle diameter, length 30 mm - Electronic horizontal positioning - Electronic vertical positioning - Hardware and PLC modifications for axis management - Tandem output and modifications.

Kondisi: bekas, Tahun pembuatan: 2017, Direct numerical control (NC HOPS) with Campus software Working area X-axis: 3400 mm Working area Y-axis: 1600 mm Working area Z-axis: 300 mm Worktable with 6 adjustable rails Equipped with 3 suction cups per rail for holding the workpiece 1 electrospindle with 5 axes, 10 kW, with automatic tool changer, cone type HSK F63 Drilling head with 24 spindles as follows: - 12 vertical spindles (Y-axis) - 6 vertical spindles (X-axis) - 4 horizontal spindles (Y-axis) Bodpfxjwwiybe Abkjdk - 2 horizontal spindles (X-axis) Automatic tool change system with 18 positions – located at the rear of the machine Front guarding and safety system with mats and safety fences Automatic lubrication system Air conditioning unit for the control cabinet 1 vacuum pump

Kondisi: bekas, Tahun pembuatan: 2008, PC-based numerical control with XILOG PLUS software Mobile handheld console with command functions X-axis working area: 4400 mm Y-axis working area: 1360 mm Z-axis working area: 180 mm Z-axis travel: 200 mm No. 2 working supports in X No. 8 manually adjustable panel support rails with positioning LEDs No. 3 vacuum suction cups for panel holding on each rail No. 4 pneumatic Bakelite bars for panel lifting (assists with loading and unloading) No. 1 vertical electrospindle with vector axis and automatic tool change, HSK 63 taper Automatic tool changer with 12 positions on the working head Drilling unit composed as follows: No. 8 vertical spindles on X axis No. 5 vertical spindles on Y axis No. 4 horizontal spindles on the X axis Bedjpvai Depfx Abksdk No. 2 horizontal spindles on the Y axis Safety system with bumper system on the operator head No. 1 vacuum pump 100 m3/h Automatic lubrication

Kondisi: bekas, Tahun pembuatan: 2013, Machining center with automatic robot for loading and unloading panels Numerical control Biesse XP600 with graphical interface software Biesse Works ADVANCE – machine and office version WRT technology (Windows Real Time): The machine control logic is processed directly on the PC and not on a dedicated special device Working area in X-axis: 6200 mm Working area in Y-axis: 1552 mm Working range in Z-axis: 180 mm Z-axis travel: 235 mm No. 2 working fields in X-axis Bar worktable / Console No. 10 EPS electronically adjustable bars for suction pad holders 8 pneumatic Bakelite rods for panel lifting – loading/unloading aid No. 4 electronically adjustable EPS suction pads per bar with vacuum seal for panel clamping during machining No. 1 vertical electrospindle with automatic tool changer, motor 12 kW – 12000 rpm – flange for aggregates – C-axis vector ready Automatic tool change system with 12 places – mounted on machine head Drilling head BH35L with spindle arrangement as follows: - No. 14 vertical in X-axis - No. 10 vertical in Y-axis - No. 6 horizontal in X-axis - No. 4 horizontal in Y-axis Independent saw blade for grooving in X-axis – diameter 120 mm Carpet front protection and safety system Perimeter safety fence Automatic lubrication system Machine-controlled cooling and cleaning system with air conditioner Vacuum pump mc/h 250 Kuka industrial robot with 6 articulated axes with point-to-point positioning Independent operating panel Panel alignment table Barcode reader on robot arm Panel feed system via: * 1 motorized roller conveyor for preloading panel stacks Bjdpfxokvrxus Abkjdk * 1 translating motorized roller conveyor * 1 motorized roller conveyor for unloading panel stacks Technical data: * Type: KR210-2 * Number of axes: 6 * Permissible rated load: 210 kg * Machine weight: 1267 kg * Noise level: 75 dB * Installed power: 25.8 kW * Panel dimensions – min/max length: 300/3000 mm * Panel dimensions – min/max width: 180/1500 mm * Panel dimensions – min/max thickness: 8/60 mm * Max. panel weight: 90 kg

Kondisi: bekas, Tahun pembuatan: 2009, Biesse factory control system Working area on the X-axis: 3500 mm Working area on the Y-axis: 1585 mm Stroke on the Z-axis: 350 mm 2 working zones Bar worktable 8 adjustable support bars 4 pneumatic Bakelite support bars for lifting the panel 3 adjustable suction cups per bar with vacuum seal for securing the panel during processing 1 four-axis vertical electrospindle (Vector) with automatic tool changer, HSK-type cone 10-position rotary tool change system on the working head 24-position chain tool change system—located at the rear of the machine Drilling head with vertical and horizontal spindles composed as follows: - 12 vertical spindles in the X direction - 12 vertical spindles in the Y direction - 6 horizontal spindles in the X direction - 4 horizontal spindles in the Y direction 1 independent saw blade for producing X-grooves Carpeted front protection and safety system Perimeter safety fencing Chip extraction system with motorized conveyor belt Bdsdsw D Dhajpfx Abksk Conditioning system for cooling and cleaning the machine control Vacuum pump 250 m³/h TECHNICAL DETAILS TO BE VERIFIED

Kondisi: bekas, Numerical control XNC Working area on X-axis: 3400 mm Working area on Y-axis: 1300 mm Stroke on Z-axis: 155 mm Number of work zones: 2 Bar worktable 8 manually adjustable bars with display for indicating working height 8 pneumatic Bakelite bars for lifting the panel 3 manually adjustable suction cups per bar, with vacuum seal for panel fixation during machining 1 vertical electrospindle with C-axis Vector, automatic tool changer, ISO 30 taper, flange for use with aggregates Automatic tool changer with 3 positions for laterally mounted aggregates Automatic tool changer with 20 positions and chain Drilling head with spindles arranged as follows: - 10 vertical spindles on X-axis - 12 vertical spindles on Y-axis Bodov Edggspfx Abkedk - 6 horizontal spindles on X-axis - 2 horizontal spindles on Y-axis Front safety carpet and safety system Perimeter safety fence Motorized carpet for chip extraction Vacuum pump

Kondisi: bekas, Tahun pembuatan: 2019, Numerical control with bSolid software. The multi-document software application in the Windows environment allows for the design of the finished product, process definition, work plan setup, simulation of machining operations on the 3D model of the machine, and generation of the necessary machine programs. bSolid – 3-axis machining bSolid – 5-axis machining module for surface operations using 5-axis units and interpolation movements across all 5 axes (X, Y, Z, C, B). The module includes the following commands: • 3D roughing and finishing operations assigned to surfaces • Extension or projection of toolpaths onto a curved surface • Machining on a plane • Following 2D or 3D curves with any tool type bSolid – 3D engraving bSolid – Import external formats Work areas: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H = 74 mm Z = 245 mm with modules H = 29 mm Clamping area in Y: * 1650 mm, with a thickness of up to 60 mm on modules with a height of 74 mm * 1600 mm, with a thickness over 60 mm on modules with a height of 74 mm. 10 ATS levels – 40 carriages. The system includes: • 2 aluminium bars (1 left/1 right) on which the lateral stops glide. • 10 aluminium work tables. The tables slide on hardened and ground linear guides with recirculating ball bearings. Locking on both linear guides, front and rear, is achieved by four pneumatic cylinders. Control is via a button in front of the working area. The carriages slide on steel guides positioned above the extrusion. Pneumatic locking system, divided into 2 locking zones along X. Automatic positioning (EPS) for work tables. “EPS” (Electronic Positioning System): Device for automatic NC-controlled positioning of work tables and carriages, including locking mechanisms to exclude possible operator errors. Rear row stop, 140 mm stroke Intermediate row stop, positioned at 405 mm, 140 mm stroke Front row stop, positioned at 1460 mm, 140 mm stroke 4 side stops with 140 mm stroke (2 right + 2 left) per system 2 additional side stops with 140 mm stroke (1 right + 1 left) Sensor to check whether the stops are lowered 12 clamps for holding narrow workpieces 6 loading aid bar lifters, for H = 74 mm module 5A configuration, for Rover B. Configuration for high productivity and flexibility thanks to two processing units (4 and 5 axis) and the option for simultaneous tool change. Includes axes and carriages for the movement of the main processing units. Comes with 2 inverters. Second Y-axis. Allows separation of front and rear Y carriages with independent drive. Both Y carriages reach a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 interface, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 operation • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 operation • Ceramic bearings • Clockwise and counterclockwise operation • Speed programmable by NC from 1,000 to 24,000 rpm Bdjdew D E A Eopfx Abksk • Release via pneumatic actuator using prismatic linear guide and recirculating ball bearings • Cover included for chip extraction with 6 positions ...

Kondisi: bekas, Tahun pembuatan: 2018, Numerical control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia – IoT connectivity Office control Working area X-axis: 3,228 mm Working area Y-axis: 1,580 mm Working area Z-axis: 200 mm with suction cups H74 mm Working area Z-axis: 245 mm with suction cups H29 mm No. 8 adjustable ATS panel support rails Pneumatic clamping installation, divided into two Y zones No. 6 pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for rails Suction cup setup assistant No. 1 electrospindle (pantograph) with 4 axes, automatic tool changer, 13 kW motor (17.4 HP), liquid cooling, HSK cone connection, 20,000 rpm Automatic tool changer with 16 positions on the X-axis carriage Independent Tesa drilling spindles BH17 are arranged as follows: Bdjdpfx Abjugpwnsksk No. 5 independent spindles for vertical drilling in the X direction No. 5 independent spindles for vertical drilling in the Y direction No. 4 spindles for horizontal drilling in the X direction No. 2 spindles for horizontal drilling in the Y direction No. 1 blade integrated into the drilling head, 120 mm diameter (usable cut 25 mm) GU60L gluing unit for EVA adhesive with premelter – edge pressure system with double rubberized roller for spokes, max. inner diameter 30 mm and sensor for edge joint – 500 ml glue pot mounted on glue roller – edge preheating lamp – edge feed system – edge trimming system – option for manual edge insertion Plastic edge thickness: 0.4 to 3 mm Wood edge thickness: 0.4 to 2 mm Laminate edge thickness: 0.4 to 1.2 mm Maximum edge width: 65 mm Workpiece thickness: 10 to 60 mm Minimum machinable internal radius with edging: 30 mm Maximum external radius for edges (proportional to edge thickness and stiffness): * 10 mm with up to 1 mm edge thickness * 20 mm with 2 mm edge thickness * 30 mm with 3 mm edge thickness Minimum size of edged panel: 300 x 300 mm Minimum internal diameter for edges: 350 mm with plastic edges less than 1 mm thick and panel max. thickness 18 mm Edge magazine with 2 positions in the safety enclosure for edges up to max. thickness 65 mm Finish additive cleaning station with automatic dispensing of special cleaning fluids and cleaning cycle No. 1 unit for rounding/contouring edges No. 1 EF60A combination unit trimmer/scraper Perimeter safety fence Chip extraction system with motorized conveyor Liquid cooling system Automatic lubrication system No. 1 vacuum pump, 250 m³/h TECHNICAL DATA TO BE CONFIRMED