Kondisi: bekas, Tahun pembuatan: 2011, produsen pengendali: Mitsubishi, model controller: TX-8i, Description: Main spindle: Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Gjdsx E Inmepfx Ag Rouk Torque: 7 Nm Bar capacity: 15 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Counter spindle: Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool turret I (X/Y): Technology: Turret with 6 stations (fully driven) Tool holder: ø25 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool turret II (X/Z): Technology: Turret with 6 stations (fully driven) Tool holder: ø25 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front attachment: Number of stations: 4 Tool holder: ø28 mm Pitch spacing: 32 mm Tool drive: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear attachment: Number of stations: 4 Tool holder: ø28 mm Pitch spacing: 32 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: Coolant pump Raw material feed: Bar feeder, FMB minimag 20/3200 Finished part discharge: Workpiece discharge unit (tube) Emulsion mist extraction: Interface mechanically prepped Toolholders: Various fixed and driven holders

Kondisi: baik (bekas), Chuck flange, flange mount, lathe chuck flange, drive flange Gjdef Ek Hfspfx Ag Rjuk - Chuck flange: suitable for three-jaw chucks, four-jaw chucks, and faceplates - Outer diameter: Ø 300 mm - Mount: short taper 8 (139.8 mm) - Dimensions: Ø 300 x 100 mm - Weight: 14 kg

Tahun pembuatan: 2020, Kondisi: siap digunakan (bekas), Data Umum Berat mesin: 2223 kg Penggerak Utama Jumlah sumbu: 2 Kecepatan spindel: 1800 RPM Daya motor spindel: 7,5 kW Pergerakan Pergerakan Sumbu X: 203 mm Gjdpfxsx E D U No Ag Rsuk Pergerakan Sumbu Z: 762 mm HAAS TL1 ini diproduksi pada tahun 2020. Mesin bubut horizontal yang kokoh dengan diameter ayun di atas apron depan 508 mm dan panjang pemotongan maksimum 762 mm. Mendukung kecepatan spindel hingga 1800 rpm dengan torsi maksimum 146 Nm pada 355 rpm. Ideal untuk pekerjaan pembubutan detail. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Pembubutan

Kondisi: bekas, Tahun pembuatan: 2000, gebrauchte-condor-ac-teilueberholt Gujdpfjx E Um Njx Ag Rek

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 352 mm, jarak gerak sumbu Z: 250 mm, kecepatan rotasi (maks.): 5.000 rpm, model controller: Fanuc Series 0i Mate-TD, Perlengkapan: konveyor serpihan, DETAIL TEKNIS Diameter putar di atas dudukan alat: 70 mm Perjalanan sumbu X: 352 mm Perjalanan sumbu Z: 250 mm Posisi alat: 8 Lubang tembus: 42 mm Kecepatan putar maks.: 5.000 rpm DETAIL MESIN Godpfx Asx E Uzmog Rjuk Kontrol: Fanuc Series 0i Mate-TD PERLENGKAPAN Chuck penjepit kuat D135 mm Adaptor collet 173E Penangkap benda kerja Konveyor serpihan

Kondisi: bekas, citizen-cincom-m16-description Guodpsx Hfm Aefx Ag Rok

Kondisi: bekas, Tahun pembuatan: 2013, en-GB Guedpfx Agexpizgj Rek

Kondisi: baik (bekas), Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck - Chuck size: Ø 250 mm - Recess: Ø 230 mm - Bolt circle: Ø 200 mm - Quantity: 2 available Gusdpfx Agedq Nftj Rjk - Price: per piece - Weight: 35 kg

Kondisi: baru, Tahun pembuatan: 2025, 105909 Guodpfx Agjwp Tqns Rjk

Kondisi: bekas, Clamping surface 200x55x195 mm Weight 0.01 t Gujdpfx Aegqg Ruog Rjk - 4 top jaws -

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1310370, panjang pembubutan: 240 mm, diameter pembubutan: 180 mm, kecepatan spindel (maks.): 6.000 rpm, gerak cepat sumbu X: 12 m/menit, pergerakan cepat sumbu Z: 18 m/menit, tinggi total: 2.200 mm, panjang total: 1.500 mm, lebar total: 1.500 mm, berat keseluruhan: 2.000 kg, Diameter batang (maks.): 35 mm, produsen pengendali: FANUC, model controller: SERIES oi-TD, Diameter batang (min.): 26 mm, TAKAMAZ XL-100 Mesin Bubut CNC - Tegangan operasi: 200 V - Frekuensi: 50/60 Hz - Sambungan: 23 kVA - Ukuran chuck: 6 inci - Diameter ayun maksimum di atas tempat tidur: 320 mm - Diameter batang maksimum: 26/35 mm - Diameter bantalan spindel: 75 mm - Revolver alat 12 posisi - Max. langkah sumbu X: 120 mm - Max. langkah sumbu Z: 280 mm Perhatian: Barang harus diambil secara pasti antara tanggal 04 sampai 12.03.2026 pada tanggal yang akan disepakati. Gsdpfx Agsx E T Tze Rsuk FCA D-75181 Pforzheim – dimuat ke truk

Kondisi: baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, The used SPINNER TC77 SMCY CNC lathe with Y-axis and sub-spindle is a robust inclined bed CNC lathe with flat guides, ASA size 8", featuring a BARUFFALDI 2-speed automatic gear transmission, equipped with both main and sub spindle (each with "C"-axis), and a motorized turret with Y-axis offering 120mm travel (+60/-60 mm), VDI 50 interface. The configuration includes a FANUC Series i CNC control with color LCD and conversational programming (Manual Guide i), Ethernet interface, RS232 port and memory card for program input, chip conveyor, 315mm hydraulic 3-jaw chuck (main spindle), a set of 10 driven tool holders and various static holders, as well as an extensive selection of chuck jaws. Main features: - Max. swing diameter: 690 mm - Max. standard turning diameter: 500 mm - Max. workpiece length: 800 mm - Max. bar capacity (main spindle): 77 mm - Max. bar capacity (sub-spindle): 52 mm - Main spindle chuck: 315 mm - Sub-spindle chuck: 210 mm - Max. X-axis travel: 360 mm - Max. Y-axis travel: 120 mm (-55/+65) - Max. Z-axis travel: 980 mm - Main spindle: ASA 8", 26 kW, up to 1,030 Nm, max 4,000 rpm - Sub-spindle: ASA 6", 18 kW, up to 113 Nm, max 4,000 rpm - Turret: 12-position tool changer, VDI 50 (live tools, 4,000 rpm) - Machine weight: approx. 6,000 kg Year of manufacture: 2006, installed in 2008, approx. 5,800 operating hours; CE-compliant, complete with manuals. Guodpjuizukefx Ag Rek

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, Vertical Single-Spindle Turning Center / Vertical Lathe Manufacturer: EMAG Model: VL 400 (Siemens) Year of manufacture: 2021 Operating hours: approx. 1,848 Base Turret Unit and Slide Unit Y-Axis HP Turret Drive Unit for Driven Tools (C442) with internal coolant supply to the tool Max. speed: 6,000 rpm Corner speed: 3,200 rpm Tool carrier unit for driven tools: 12 x BMT75 Rotary Workpiece Transport System, O-Version Drag frame system for 10 workpieces Workpiece height (incl. workpiece pallet): max. 300 mm Workpiece weight: max. 60 kg Set (10 pieces) of drag frames for O-Band For workpiece diameter: 150 - 400 mm Blow-off of the workpiece and clamping device (Pick-Up) Coolant/Lubricant Supply: 15 bar Coolant pump delivery rate approx. 80 l/min at 15 bar. Cooling unit (6.5 kW, water - air) One cooling unit (with 2-circuit technology) regulates thermal management of the machine. Spindle drive, electrical cabinet, and turret are kept at ambient temperature (10°C - 40°C). Coolant double filter, manually selectable Filtration fineness 100 μm, with electrical and mechanical contamination indicator Chip conveyor Hinged belt version: to the rear Chip discharge height 1,100 mm (with integrated coolant tank, capacity approx. 500 l) Emulsion mist extractor: extraction capacity approx. 800 m³/h Rinsing gun Workpiece measurement with measuring probe Blow-off for measuring probe Tool life monitoring (sister tool management) Tool breakage monitoring TOOLINSPECT MCU-EUROPA (SIEMENS 840Dsl, FANUC 31i/32i) 3-color signal light Axial drilling/milling head – BMT75 CC 5x angle drilling/milling heads 90° - BMT75 CC (i=1:1) Set of tools for OP10 + OP20 Hydraulic full-stroke cylinder Gr.150 - with 1 media passage Max. clamping force 10,850 daN at 70 bar Coolant through spindle Gjdpjvq Iwysfx Ag Reuk Programmable clamping pressure adjustment 3-jaw power chuck KNCS-N 500-155 quick change Max. = 2,200 rpm (reference speed according to DIN 6386) Set of hard base jaws Set of soft top jaws Attachments for KNCS-N 500-155 Flush nozzle in chuck bore Additional tool holders with tools: 1x 8.BMT25VL8IKX50 Fine turning external 1x 8.BMT25VL8IKX50 Rough turning external 1x 60.7516VL8IKDI15 Engraving tool 1x 60.7516VL8IKDI15 Thread tapping holder 1x 40.75V5KRVL8IKD Face mill 50 mm 3x 80.75V5VL8IKD Boring bar holder 2x 27.V520HYDL26 Drill diameter 20 mm 1x 42.V522L08Ik Drill diameter 22 mm 1x 27.V514WNL31 Drill diameter 14 mm Software package Operating manual / Maintenance manual

Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), Bedieneinheit Marke: SIEMENS Modell: 840C Guodsx D Hgispfx Ag Rok Zusätzliche Ausstattung Ausstattung: Stangenlader und mehrere angetriebene Werkzeuge Diese Index G200C Horizontal-Drehmaschine wurde 2001 gefertigt. Sie eignet sich ideal für Präzisionsdrehbearbeitungen und bietet eine robuste Leistung sowie Zuverlässigkeit. Nutzen Sie die Gelegenheit, diese Index G200C Horizontal-Drehmaschine zu erwerben. Kontaktieren Sie uns für weitere Informationen. Anwendungsbereiche Drehen

Kondisi: bekas, Tool clamping surface 300x55x85 mm Weight 0.01 t Gujdpfx Agjgqlkgo Rjk - 4 top jaws with interchangeable serrated inserts -

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, The used DIAMOND SJ 22 CNC 2-axis lathe is a fast, medium-sized slant-bed numerically controlled lathe with flat guides and 2 axes, equipped with FANUC 0i-TC CNC, year of manufacture 2007, compliant with CE standards. Main features: - X-axis travel: 280 mm Gujdpfx Agot N Upve Rek - Z-axis travel: 360 mm - Bar capacity: 45 mm - Spindle: max. rotation speed 6,000 rpm - Spindle motor power: 7.5 kW - Turret stations: 12 positions The equipment also includes a hydraulic tailstock with programmable quill, a conveyor belt chip evacuator, toolholder set, 250 mm 3-jaw self-centering chuck with corresponding jaws, and operation & maintenance manuals.

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), Unit Kontrol Merek: FANUC Model: Series Oi-TB Penggerak Utama Kisaran putaran spindle: 2700 Benda Kerja Diameter benda kerja di atas ranjang: 400 mm Diameter benda kerja di atas dudukan: 246 mm Turret Jumlah turret: 7 Mesin 600 Lathes Multiturn 2000 ini diproduksi pada tahun 2004. Mesin bubut horizontal yang kokoh dengan diameter pembubutan di atas ranjang 400 mm dan panjang 1250 mm. Mesin ini beroperasi pada kecepatan spindle 2700 rpm dengan turret 8 posisi. Taper tailstock adalah Morse 5. Jika Anda membutuhkan kemampuan pembubutan berkualitas tinggi, pertimbangkan mesin 600 Lathes Multiturn 2000 yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut. Godpfx Asx D Hhtjg Rsuk Jenis Aplikasi Pembubutan

Kondisi: bekas, Tahun pembuatan: 2007, drehdurchmesser-600-mm-technische-daten Gujdpfxov Rrq Dj Ag Rek

Kondisi: bekas, Tahun pembuatan: 2007, self-learning lathe 230x1000 bar passage 58 mm FAGOR 8055 CNC year of manufacture 2007 complete with: Gsdjv Nqulopfx Ag Rjuk self-centering chuck chip conveyor manual turret with CAPTO C4 interface toolholder set set of jaws manuals and CE certificate

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 31.316 h, Control Unit Hersteller FANUC Modell 0i-TD Zusätzliche Ausstattung Teileauswurf-Sicherheitsverschluss / Teileauswurfvorrichtung (Federmechanismus) / Ausblasvorrichtung für Führungsbuchse und Gegenspindel / Separater Kühlmitteltank mit Füllstandüberwachung / Messtaster / Zentrale automatische Schmiereinheit mit Füllstandüberwachung / Schnittstelle für Stangenlader / RS232C-Schnittstelle / RJ45 / USB Die Maschine wurde für die Serienfertigung von Kleinteilen mit höchster Präzision aus standardmäßig relativ weichem Material eingesetzt. Die Maschine wurde nicht dynamisch überbeansprucht, die Fertigung erfolgte im Ölbetrieb. Der Service erfolgte regelmäßig, Lager wurden nahezu kontinuierlich gewechselt, alles in einwandfreiem Zustand. MBC (BROXTEC) Späneförderer / Werkstückförderband / FMB Minimag 3200 Stangenlader (⌀ 8) Diese 5-Achs-Drehmaschine Star SB-20R Typ N wurde 2014 hergestellt und ist ausgestattet mit einer CNC-Steuerung Fanuc 0i-TD, C-Achse auf Haupt- und Gegenspindel sowie einem 6-fach Werkzeughalter. Sie verfügt über eine 5-fach Kreuzbohreinheit, eine Gegenspindel mit 20 mm Teileübernahme-Kapazität sowie einen separaten Kühlmitteltank. Ideal für die präzise Fertigung von Kleinteilen. Wenn Sie hochwertige Drehbearbeitungen suchen, empfehlen wir die zum Verkauf stehende Star SB-20R Typ N. Kontaktieren Sie uns für weitere Informationen. Anwendungsbereiche Drehen Godpfx Aox D S Aisg Rsuk

Tahun pembuatan: 1998, Kondisi: bekas, Max. 75 bar Piston stroke: 0 mm Guodpfxou Sbcve Ag Rjk Revolutions per minute: 0 rpm 2 identical units available. Offer price is for 1 piece.

Kondisi: bekas, Tahun pembuatan: 1994, Turning diameter 570 mm Turning length 2000 mm Control: Sinumerik 805 Siemens Max. swing diameter over cross slide 365 mm Main spindle speeds: 3-2,500 rpm Main spindle drive power 15/19 kW Spindle bore 62 mm Spindle nose DIN 55027 No.8 Gjdpfxeu Sbkgj Ag Rouk Tailstock taper MK 5 Quill stroke 190 mm Quill diameter 80 mm Feed range – longitudinal and transverse 0.01-50 mm/rev Total power requirement 50 KVA Machine weight approx. 5 t Space requirement approx. m Incl. Forkardt chuck F315 Incl. 6 pcs Multifix holders Incl. 1 pc closed steady rest Incl. 1 pc open steady rest

Kondisi: bekas, Boehringer lathe turret Godpfon Sulmex Ag Rouk

Kondisi: bekas, Tahun pembuatan: 1981, de-to-hu-it-lt-001 Godpju Sbdgofx Ag Rouk

Tahun pembuatan: 2021, Kondisi: bekas, Tool clamping surface: 1 mm Weight: 1 t Neidlein Face Drivers - Parts List Designation Type No. Face Driver FFB6 6359-00 Adapter Plate ZFE/SKE SK872-117 NL.74218 18 pcs Drive Pins SB6-170HS 736-235 Guodevn Upkopfx Ag Rjk Center Point FFB5/55/6 NL-SK 1621-14 D=32 Center Point FFB5/55/6 NL-SK 1621-15 D=36 Center Point FFB5/55/6 NL-SK 1621-16 D=40 Center Point FFB5/55/6 NL-SK 1621-17 D=44 Center Point FFB5/55/6 NL-SK 1621-18 D=48 Center Point FFB5/55/6 NL-SK 1621-19 D=52 Center Point FFB5/55/6 NL-SK 1621-20 D=56 Center Point FFB5/55/6 NL-SK 1621-21 D=60 Center Point FFB5/55/6 NL-SK 1621-22 D=64 Center Point FFB5/55/6 NL-SK 1621-23 D=68 Center Point FFB5/55/6 NL-SK 1621-24 D=72 Center Point FFB5/55/6 NL-SK 1621-25 D=76 Center Point FFB5/55/6 NL-SK 1621-26 D=80 Center Point FFB5/55/6 NL-SK 1621-27 D=84 Center Point FFB5/55/6 NL-SK 1621-125 D=88 Center Point FFB5/55/6 NL-SK 1621-126 D=92 Center Point FFB5/55/6 NL-SK 1621-127 D=96 Center Point FFB5/55/6 NL-SK 1621-128 D=100