Beli pengering bekas (70)

Tahun pembuatan: 1980, Kondisi: siap digunakan (bekas), An old drying chamber (approx. 40 years old) from Brunner is available. External dimensions X/Y: approx. 6000 mm / 8000 mm. An on-site inspection is possible. Hsdpfx Ajvbigwsd Rjk

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Vanicek drying chamber with stake wagon with entry and exit gates (hinged doors) with control system and electrical switch cabinet Dimensions: internal length 13.05 m, width 4.00 m, height 2.80 m Fan VMR 71-05-4, electric motor 1.1 kW / 400 V Hedowxdqkopfx Ad Rjk Dehumidification Ø 50, with actuator Dehumidification Ø 40, with actuator UGL sensors, humidification, heating valve (by customer) Control system, heating coil, fan frame Stacking dimensions: 1x12.50 m, 2x1.20 m, 2x1.00 m

Kondisi: sangat baik (bekas), CTS 3G C 400* - High-Temperature Hot Water Boiler, Manually Fed with Wood Waste Thermal output: 400,000 kcal/h. Operating pressure: 4 bar. Superheated water temperature: 150°C. Control thermostat, safety thermostat, thermometer included. Fuel: wood waste Flue gas exhaust: cyclone, forced draft fan, connecting ductwork Steaming chamber net capacity: 100 m³/batch DVK-I 100 m³ - 1 unit, 8.5 x 9 m x H 4.3 m Control unit: Baschild Italy Sliding door Oxyvent overpressure system Stainless steel vats and radiators on 3 sides Hodpfx Aew Ev Twjd Rjk Includes turnkey connections boiler-steaming chamber and complete boiler room with distributor, manifold, pumps, expansion vessel, etc.

Tahun pembuatan: 2015, Kondisi: bekas, CHAMBER DRYER FOR WOOD NARDI INTERNATIONAL K 200 – 2015 For sale: industrial wood drying chamber NARDI INTERNATIONAL K 200. The unit is in very good technical condition, complete and ready for operation. Equipped with LEONARDO 3.0 control system and heat recovery system. Hjdpfx Aeygcw Ded Rok — 1. Basic parameters Batch capacity: approx. 115 m³ Usable (internal) dimensions: • Width (loading): 10.8 m • Depth: 8.9 m • Height: 4.1 m Loading doors: 10.9 × 4.2 m, sliding type Max. drying temperature: 75°C Heating: hot water 80°C, max 2 bar Heating power: 345,000 Kcal/h (401 kW) Power supply: • 400V / 50 Hz • 230V / 50 Hz (control) — 2. Construction Chamber made entirely of acid-resistant aluminium suitable for oak processing. Aluminium panels with glass wool insulation (140 mm). INOX screws, elimination of thermal bridges. External shell made of trapezoidal sheet with ventilation ducts. Structural resistance: • Snow load up to 120 kg/m² • Wind up to 100 km/h — 3. Air circulation • 6 tunnel fans (100% reversible) • 4 kW motors, IP55 • High-temperature bearings • Individual frequency inverters Ensures uniform and energy-efficient drying. — 4. Heat recovery • Centrifugal fan • Double heat exchangers • 6 Belimo dampers • PLC control • Acid-resistant INOX ducts The system significantly reduces energy consumption. — 5. Control system CE control cabinet, IP55. PC with LEONARDO 3.0 software (Windows 7). Functions: • multi-stage cycle programming, • parameter archiving, • graphical process visualisation, • control of up to 32 chambers. — 6. Sensors • 6 wood moisture probes • 2 temperature probes • 2 EMC probes • RCU module — 7. Commercial information • Price: 60,000 EUR / unit • Available: 2 units (2-chamber module) • Module price: 120,000 EUR • Sale only as 2-unit module • Terms: EXW (38-120 Czudec, Poland) – Incoterms 2020 If interested, please contact by e-mail or WhatsApp.

Tahun pembuatan: 2016, Kondisi: bekas, NARDI INTERNATIONAL K 200 WOOD DRYING CHAMBER – 2016 For sale: Industrial wood drying kiln NARDI INTERNATIONAL K 200. Chamber in very good technical condition, ready for operation. --- 1. Basic Specifications Charge capacity: approx. 115 m³ Usable (internal) dimensions: • Width (loading): 10.8 m • Depth: 8.9 m • Height: 4.1 m Loading door: 10.9 × 4.2 m, sliding type Max. drying temperature: 75°C Heating: hot water 80°C, max 2 bar Heating power: 345,000 Kcal/h (401 kW) Electrical supply: • 400V / 50 Hz • 230V / 50 Hz (control system) --- 2. Construction The chamber is made entirely of acid-resistant aluminium (oak acid resistant). Aluminium sandwich panels insulated with 140 mm glass wool. Stainless steel (INOX) bolts, eliminating thermal bridges. Exterior sheathing: trapezoidal aluminium sheet with integrated ventilation ducts. Structure resistance: • Snow load up to 120 kg/m² • Wind load up to 100 km/h --- 3. Air Circulation • 6 tunnel fans (100% reversible) • 4 kW motors, IP55 • High-temperature bearings • Individual variable frequency drives (inverters) Ensures uniform and energy-efficient drying. --- 4. Heat Recovery Hedpfx Adjygcwws Rok • Centrifugal fan • Double heat exchangers • 6 Belimo dampers • PLC control • Acid-resistant INOX ducts This system significantly reduces energy consumption. --- 5. Control System CE-compliant control cabinet, IP55. PC with LEONARDO 3.0 software (Windows 7). Features: • Programmable multi-stage cycles • Parameter archiving • Graphic process visualization • Control for up to 32 chambers --- 6. Sensors • 6 wood moisture probes • 2 temperature probes • 2 EMC probes • RCU module --- 7. Commercial Information Availability & Price: • Price: €50,000 / 1 unit • Available: 4 units (4-chamber module) • Module price: €200,000 • Terms: EXW (38-120 Czudec, Poland) – Incoterms 2020 If interested, please contact us via email or WhatsApp.

Tahun pembuatan: 2016, Kondisi: bekas, NARDI INTERNATIONAL K 200 WOOD DRYING KILN – 2016 The unit is in very good technical condition, complete and ready for operation. Equipped with LEONARDO 3.0 control system and heat recovery system. ⸻ 1. Basic Parameters Charge capacity: approx. 115 m³ Usable (internal) dimensions: • Width (loading): 10.8 m • Depth: 8.9 m • Height: 4.1 m Loading door: 10.9 × 4.2 m, sliding Max. drying temperature: 75°C Heating: hot water 80°C, max 2 bar Heating power: 345,000 Kcal/h (401 kW) Power supply: • 400V / 50 Hz • 230V / 50 Hz (control) ⸻ 2. Construction Chamber made entirely from aluminium resistant to oak acids. Aluminium panels with 140 mm glass wool insulation. INOX (stainless steel) screws, eliminating thermal bridges. Exterior made of trapezoidal steel sheeting with vent channels. Structural resistance: • Snow load up to 120 kg/m² • Wind up to 100 km/h ⸻ 3. Air Circulation • 6 tunnel fans (fully reversible) • 4 kW motors, IP55 • High-temperature bearings Hjdpfxsygcwkj Ad Rsk • Individual inverters Ensures uniform and energy-efficient drying. ⸻ 4. Heat Recovery • Centrifugal fan • Double heat exchangers • 6 Belimo dampers • PLC control • INOX (stainless steel) acid-resistant channels The system significantly reduces energy consumption. ⸻ 5. Control System CE-compliant control cabinet, IP55 rating. PC with LEONARDO 3.0 software (Windows 7). Features: • multi-stage cycle programming, • data archiving, • graphic process visualization, • control for up to 32 kilns. ⸻ 6. Sensors • 6 wood moisture probes • 2 temperature sensors • 2 EMC probes • RCU module ⸻ 7. Commercial Information • Price: 50,000 EUR / 1 unit • Available: 4 units (4-chamber module) • Module price: 200,000 EUR • Sale only as a complete module • Terms: EXW (38-120 Czudec, Poland) – Incoterms 2020 If interested, please contact us via email or WhatsApp.

Tahun pembuatan: 2021, Kondisi: bekas, For sale: Industrial timber drying kiln NARDI INTERNATIONAL K 200, year of manufacture 2021. The chamber is fully operational and available for inspection (test run possible). The offer concerns 1 unit from a modular kiln system (5 units from 2021 available). NARDI INTERNATIONAL K 200 WOOD DRYING KILN – 2015 For sale: industrial timber drying chamber NARDI INTERNATIONAL K 200. The equipment is in excellent technical condition, complete, and ready for operation. Fitted with a LEONARDO 3.0 control system and heat recovery system. — 1. Key parameters Loading capacity: approx. 115 m³ Usable (internal) dimensions: • Width (loading): 10.8 m • Depth: 8.9 m • Height: 4.1 m Loading doors: 10.9 × 4.2 m, sliding Max. drying temperature: 75°C Heating: hot water 80°C, max 2 bar Heating power: 345,000 Kcal/h (401 kW) Power supply: • 400V / 50 Hz • 230V / 50 Hz (controls) Hjdpfxoygcwdo Ad Rek — 2. Construction Chamber made entirely of aluminium resistant to oak acids. Aluminium panels with glass wool insulation (140 mm). INOX bolts, elimination of thermal bridges. External cladding made of trapezoidal sheet with ventilation ducts. Structural resistance: • Snow load up to 120 kg/m² • Wind up to 100 km/h — 3. Air circulation • 6 tunnel fans (100% reversible) • 4 kW motors, IP55 • High-temperature bearings • Individual inverters Ensures uniform and energy-efficient drying. — 4. Heat recovery • Centrifugal fan • Double heat exchangers • 6 Belimo dampers • PLC control • Acid-resistant INOX ducts The system significantly reduces energy consumption. — 5. Control system CE-certified control cabinet, IP55. PC computer with LEONARDO 3.0 software (Windows 7). Functions: • multi-stage cycle programming, • parameter archiving, • graphical process visualization, • control of up to 32 chambers. — 6. Sensors • 6 wood moisture probes • 2 temperature probes • 2 EMC probes • RCU module — 7. Commercial information • Price: 72,000 EUR / 1 unit • Available: 5 units (5-chamber module) • Sale only as 5-unit module • Terms: EXW (38-120 Czudec, Poland) – Incoterms 2020 If interested, please contact us by email or via WhatsApp.

Tahun pembuatan: 2021, Kondisi: bekas, For sale: NARDI INTERNATIONAL K 200 Wood Drying Kiln/Chamber (2021) The equipment is in very good technical condition, complete and ready for operation. Equipped with the LEONARDO 3.0 control system and a heat recovery system. ——— 1. Basic parameters Batch capacity: approx. 115 m³ Internal usable dimensions: • Width (loading): 10.8 m • Depth: 8.9 m • Height: 4.1 m Loading door: 10.9 × 4.2 m, sliding Max. drying temperature: 75°C Heating: hot water 80°C, max. 2 bar Heating power: 345,000 Kcal/h (401 kW) Power supply: • 400V / 50 Hz • 230V / 50 Hz (control) ——— 2. Construction Chamber made entirely of aluminum, resistant to tannic acid from oak. Aluminum panels with 140 mm glass wool insulation. INOX bolts, elimination of thermal bridges. External cladding: trapezoidal sheet metal with ventilation channels. Structure resistance: • Snow load up to 120 kg/m² • Wind resistance up to 100 km/h ——— 3. Air circulation • 6 tunnel fans (100% reversible) • 4 kW motors, IP55 • High-temperature bearings • Individual inverters Ensures uniform and energy-efficient drying. ——— 4. Heat recovery • Centrifugal fan • Double heat exchangers • 6 Belimo dampers • PLC control • Acid-resistant INOX ducts Hedpfxoyf Uynj Ad Rek System significantly reduces energy consumption. ——— 5. Control system CE control cabinet, IP55. PC with LEONARDO 3.0 software (Windows 7). Functions: • Programming of multi-stage cycles • Parameter archiving • Graphical process visualization • Control of up to 32 kilns ——— 6. Sensors • 6 wood moisture probes • 2 temperature probes • 2 EMC probes • RCU module ——— 7. Commercial Information • Price: EUR 72,000 / unit • Available: 5 units (5-chamber module) • Sold only as a 5-unit module • Terms: EXW (38-120 Czudec, Poland) – Incoterms 2020 If interested, please contact us by email or WhatsApp.

Tahun pembuatan: 2012, Kondisi: baik (bekas), Komplette Trocknungslinie für Sägemehl bis zu 6 t/h, bestehend aus: - Trommeltrockner Instalmec CT40 - Sägemehl-Heizofen 5 MW mit Gas-Mischkammer - Schubboden-Rohmateriallager Rc9Tv Hjdovu Dq Repfx Ad Rok - Scheibensieb für Grobanteile - Zwischenbunker 6 m³ vor dem Trockner - Zellenradschleuse - Hauptventilator 160 kW - Brennstofflager und Förderanlage

Tahun pembuatan: 2002, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Trommeltrockner für Holzsägemehl und -späne mit einer Kapazität von bis zu 15 t/h. Hodpfxsvx S Hnj Ad Rjk Zustand: voll funktionsfähig.

Tahun pembuatan: 2013, Kondisi: bekas, Drying chamber with intermediate ceiling ventilation and front-end wagon loading for production and conditioning of 3 mm oak lamellae, from initial moisture content 12 up to max. 15% / final moisture content 7%. Used, good condition Manufacturer: Mühlböck Model: ZSWM2110-1180C – 1.0 l/h at 40°C above 30% RH Year of construction: 2013 Rated power: 7 kW/15A Frequency: 50 Hz Control voltage: 24VDC/230VAC Protection class: IP54 Contents: The chamber accommodates - 2 stacks widthwise at 1.10 m each, with 0.20 m spacing - 1 stack heightwise at 1.80 m, on 0.10 m thick bearers, plus 0.10 m clearance - 2 stacks lengthwise at 2.20 m each, plus 0.60 m clearance The chamber contains 4 stack packages and a gross total volume of 17.4 m² The chamber holds a net 4 m³ of wood — with a wood thickness of 3 mm and stacking strip thickness of 10 mm, and 90% width utilization with edged wood. Usable internal chamber dimensions: width 2.40 m x height 2.30 m x length 5.00 m - Aluminum cassette construction - Aluminum frame Hedpfx Asvwfhisd Rek - Dimensionally stable rock wool insulation - Aluminum trapezoidal sheet cladding - Snow load: 100 kg/m² - Double-leaf hinged door - Front-end loading - 2 fans, each 3 kW (D=800 mm) - Stainless steel/aluminum finned tube heating coil with 50 kW, flow temperature 80°C, return 73°C - Servo-controlled supply and exhaust air dampers - Cold water spray system - Chambers operate fully automatically - Computer control K5 Dismantling: at customer site Delivery as-is, as inspected Without guarantee or warranty

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 11165/1, lebar kerja: 1.300 mm, tinggi benda kerja (maks.): 40 mm, DETAIL TEKNIS Lebar kerja maks.: 1.300 mm Hodpfjydn S Isx Ad Rjk Tebal yang dapat diproses maks.: 40 mm PERLENGKAPAN Sistem pengeringan dengan 3 lampu UV Sistem transportasi dengan batang bermotor Lemari kontrol terpisah

Tahun pembuatan: 2026, Kondisi: diremaj di bengkel (bekas), Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 559, Pengering dioptimalkan untuk kayu tebal atau kayu keras Panjang efektif: 5000 mm Tinggi efektif: 1100 mm Hsdpfx Aeya Ik Aod Rok Lebar efektif: 1100 mm Panel listrik dan sensor baru Fungsi pengering dikendalikan Rel luar dan troli tidak tersedia (dapat disediakan atau kami membantu pembeli dalam pembuatannya) Pengering dapat dilihat di departemen 74

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6381/99, 2 miteinander verbundene Trockenkammern, Holzvolumen jeweils 142 m³, gesamt = 284 m³, unter Berücksichtigung folgender Angaben: - 50x100 Bretter, Stapelfaktor 0,85 - Pro Kammer: 24 Stapel à 4,2 x 1,2 x 1,2 m + 12 Stapel à 5,1 x 1,2 x 1,2 m; 1 m Freiraum vor und hinter den Stapeln, 0,15 m Abstand zwischen den Stapeln - Innenmaße jeder Kammer: Breite 15,2 m (3 Stapel), Tiefe 7,3 m (4 Stapel), Höhe 4,1 m (3 Stapel) - Ladedimmtürmaß 15,2 x 4,1 m, 2 Stück Hebe-Schiebetore; je eine Inspektionstür in den Rückwänden - Beladungssystem: Frontstapler, 2 Schiebewagen für die Hebe-Schiebetore Hjdpjwynniofx Ad Rsk Heizleistung: 610.000 kcal/h bei 60°C Rauminnentemperatur Heizsystem: Warmwasser, Vorlauf mindestens 90°C, Bimetall-Lamellenrohre (Edelstahlkern, außen Aluminiumlamellen), inkl. Automatikventil für Warmwasser mit Absperrventil und Edelstahlrohrleitungen bis zur Rückwand der Trockner Nachbefeuchtung: Kaltwasser 3,5 bar, 150 l/h. Sprühanlage aus Edelstahlrohr mit austauschbaren Düsen (Messing) Lüfteranzahl je Kammer: 12 Stück, reversierbar, 800 mm, drehzahlverstellbare Motoren 4,0/1,1 kW, 2-stufig. Lange Aluminium-Luftleitrohre (Patent Nardi) zur Luftführung, geringe Druckverluste und Energieeinsparung. Waagerechte Aluminium-Bleche verschließen den Freiraum über den Stapeln Zahl der Lüftungsklappen pro Kammer: 8+8 aus Aluminiumguss Schneelast: 120 kg/m², Windlast: 100 km/h Je Kammer ein Schaltschrank, Spannung: 400 V, 50 Hz Steuerungstyp: LEONARDO 3000 (erneuert 2007) Jede Kammer mit 12 Holzfeuchtefühlern, 2 Temperaturfühlern, 2 Messfühlern für relative Feuchte, sowie 3 digitale Anzeigen dieser Werte Demontage durch Käufer. Verkäufer stellt bei Bedarf einen Gabelstapler zur Verfügung.

Kondisi: sangat baik (bekas), Surface Finishing Technology (UV Radiation System) Working width (min/max): 1300 mm Machine length: approx. 2900 mm Workpiece thickness (working height): approx. 0 – 80 mm Feed speed (adjustable): approx. 0 – 40 m/min PLC control panel (touch screen) With integrated control cabinet and operator panel Hedpfjgz Svnex Ad Rok Total connected load: 36.9 kW Machine equipped with: - 2 UV lamps - Motorized conveyor system via side chains - Exhaust gas extraction fan - Air vacuum blower

Kondisi: sangat baik (bekas), Surface technology (UV radiation system) Working width (min/max): 1300 mm Machine length: approx. 4000 mm Workpiece thickness (working height): approx. 0 - 80 mm Feed speed (adjustable): approx. 0 - 40 m/min PLC control panel (touch screen) With integrated control cabinet and operator panel Total connected load: 54.9 kW Machine equipped with: - 3 UV lamps - Motorized conveyor system with side chains - Exhaust air fan for fumes Hodjgz Svgopfx Ad Rsk - Air vacuum blower

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2008, INSTALASI UJI DELAMINASI PADA KAYU LAMINASI Hjdpfx Aex S E S Asd Rjk

Kondisi: bekas, WSA Lignomat pengering vakum, kontrol Bollmann Tromatic 910GH, kedalaman sekitar 10 m. Hsdpfxexxpdto Ad Rjk

Kondisi: bekas, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 4.850 kg, tinggi total: 2.900 mm, panjang total: 10.000 mm, lebar total: 2.300 mm, Used thermal wood modification chamber. Constructed from high-quality materials, it ensures efficient thermal modification processes. An ideal solution for professionals in wood processing. The chamber was purchased as new in 2021 from SUKHOVIY LLC, model KTMD 9. Very lightly used and disconnected in 2023. The chamber has been used for modifying spruce and pine wood but is suitable for other wood species as well. Very simple operation and thermal modification process; only electric supply and water connection are required. The chamber is equipped with a sliding loading cart and a foldable frame that allows the cart to be moved outside for easy loading and unloading. Main specifications: - Total volume: 28.5 m³ - Capacity: up to 10 m³ per cycle - Power: 48 kW - Maximum power consumption: 260 kW/m³ - Minimum power consumption: 150 kW/m³ - Maximum achievable internal temperature: 235°C - Dimensions (L x W x H): 10.0 x 2.3 x 2.9 m - Weight: 4,850 kg Hjdpfjx E Slvjx Ad Rek The chamber comes with operation manuals in Polish and an EC Declaration of Incorporation. Price is given as net price, excluding VAT.

Tahun pembuatan: 2025, Kondisi: baru, Valmec 600 Brushing-Aging Machine - Working width: 600 mm - Feed speed: 4–12 m/min - Motor power: 2 x 4 kW - Equipped with two brushes: one wire brush and one Tynex brush - Independent brush height adjustment Hjdpegk T Etofx Ad Rok - Power supply: 400 V - Machine is brand new

Tahun pembuatan: 2024, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: Nr.50086, Mesin baru dijual karena keadaan: 6 titik sambungan dengan saluran ventilasi. Hanya pengambilan langsung! Harga dari lokasi 31637 Rodewald. Hodpfx Ajw Uf S Hjd Rjk

Kondisi: bekas, 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal treatment system / thermal chamber for wood modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler plant that uses thermal oil as a heat transfer medium. Technical Data: Capacity: 5,950 – 9,900 m³ of wood per year (at 330 operating days) Usable volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Electrical connection: 3 x 400 V, 50 Hz + Neutral + Earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating capacity: 2 MW (230°C – 250°C thermal oil) Heat consumption: 120 kWh/m³ of wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm Duplex stainless steel EN 4462 Hydraulically operated door with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Operating temperature: 0°C to 220°C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main Components: 1. Autoclave for the heat treatment process 2. Vacuum system for evacuating the autoclave before heat is applied 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 per side) Material: Stainless steel tubes (sea water resistant) Total area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Display: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature probes 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Functional Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of the customer, ex location near 5020 Salzburg (Austria), without dismantling, transport or assembly Hsdjv Si Szepfx Ad Rjk Dismantling, loading, and transport by us optionally available Subject to error in description and price To avoid misunderstandings, an on-site inspection is possible and recommended by appointment Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; sold as inspected Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to pickup or shipment Delivery terms: ex location

Kondisi: bekas, nomor mesin/kendaraan: IDC000031, Trommel zur Spänetrocknung Hedperl Ra Hofx Ad Rjk Länge – 14 m Breite – 3,6 m Trocknungsleistung – 10 t/h

Kondisi: bekas, Trockner Hsdpfx Aowtfwzed Rek Hersteller: Eisenmann Baujahr: 2001

Kondisi: bekas, Tahun pembuatan: 2017, Country of manufacture - Italy INNENABMESSUNGEN (BREITE X TIEFE X HÖHE): 13.200 X 8.900 X 5.400 MM Hodev Nkauepfx Ad Rek AUSSENABMESSUNGEN (BREITE X TIEFE X HÖHE): 14.060 X 9.500 X 6.900 MM LÜFTERMOTOREN: 5,5 KW MIT VARIABLER DREHZAHL MAXIMALE ELEKTRISCHE LEISTUNG DER LÜFTER: 55 KW