Beli pemanas & kipas bekas (267)

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger usable areas such as workshops and workspaces in artisanal and industrial operations. These hot air systems require no lengthy pre-heating phases and can heat up the joinery or carpentry workshop, as well as other production facilities, in a very short time. Suitable fuels include solid wood and its byproducts, e.g. solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37CE Italian Presidential Decree N°459 of 24 July 96 and safety standard 89/392 CE Annex. All hot air furnaces in the MARTINA range 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission values required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air operation - Thermal output: 49.9 kW - Thermal output (Kcal): 43,000 - Fuel consumption: 15 kg/h - Air flow rate: 4,900 m³/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox underpressure: 0.2-0.3 mbar - Flue draught (rated output): 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Required space: Width 720 mm, Depth 1000 mm, Height 1900 mm - Weight: 300 kg - Flue pipe diameter (nozzle): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90 % - Chimney draft: 13 Pa - Exhaust gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 200 mm - For more data, please refer to the attached data sheet Itodpfsvz Hq Hsx Ag Red The 2 pipe nozzles for hot air discharge are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per air outlet is permitted for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total connected load: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. These units have been developed for heating large commercial spaces, such as workshops and production halls in craft and industrial operations. These hot air systems do not require long heat-up phases and can quickly warm up carpentry or joinery workshops, as well as other production facilities. Solid wood and its by-products, such as leftover solid wood panels, wood chips, sawdust, pellets, or briquettes, can be used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety requirements of Directive 89/392 CE. All hot air furnaces in the MARTINA series (15, 30, 55, 85, 120, 180, 240, 350) meet both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) emission requirements. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output in kcal: 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Loading door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2-0.3 mbar - Rated flue draft requirement: 0.18 mbar - Heated room volume: approx. 7,500 m³ - Heated floor area: approx. 1,600 m² - Required space: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (socket): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85-90% Itodpfovz Hqyox Ag Red - Chimney pressure: 11.5 Pa - Exhaust gas temperature: 289°C - Hot air outlet nozzle: 2 x Ø 450 mm - For further technical details, please refer to the attached data sheet The two pipe connectors for the outgoing hot air are located on the rear side of the furnace at the bottom. A maximum of 20 metres of duct per pipe connector is permitted for air distribution. Larger lengths are available in consultation with the manufacturer. Please contact us for this option.

Kondisi: baru, Tahun pembuatan: 2025, en: Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating larger usable areas, such as production halls and workspaces in craft and industrial businesses. These warm air systems require no long preheating period and are able to heat up the workshop or joinery, as well as other production sites, within a very short amount of time. The fuel can consist of solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety guideline of Directive 89/392 CE. Itsdpfovz Hqtex Ag Rsd All warm air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by 1st BImSchV. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air delivery: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable space: approx. 300 m³ - Heatable area: approx. 60 m² - Required space: width 600 mm, depth 800 mm, height 1,900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90% - Chimney draft: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connection: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet The 2 pipe connections for outgoing warm air are located at the rear lower section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. They have been developed for heating larger functional spaces such as workshops and work areas in trade and industry facilities. These hot air systems require no lengthy warm-up times and can heat carpentry or joinery workshops, as well as other production facilities, in the shortest possible time. Fuel is solid wood and its by-products, e.g. offcuts from solid wood panels, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety regulation of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st BImSchV emission requirements. - Automatic and continuous air operation - Thermal output 29.8 kW - Thermal output in Kcal 25,700 - Fuel consumption 9 kg/h - Air output 2,400 m³/h - Combustion chamber depth 580 mm - Feed door 330 x 330 mm - Hot air fan 0.49 kW / 230 V - Negative pressure in combustion chamber 0.2–0.3 mbar - Flue draught at rated output 0.18 mbar - Heatable room volume approx. 600 m³ - Heatable area approx. 120 m² - Installation space: width 600 mm, depth 800 mm, height 1,900 mm - Weight 230 kg - Flue pipe diameter (spigot) 160 mm - Recommended chimney diameter 200 mm - Efficiency 85–90% - Chimney draft pressure 11 Pa - Flue gas temperature 286°C - Hot air outlet connections: 2 x Ø 200 mm - For more data, please refer to the attached data sheet Itedpevz Hqmsfx Ag Rjd The 2 hot air outlet pipe connections are located at the rear of the furnace in the lower section. For each outlet, a maximum of 20 meters of pipe is permissible for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 1300 x 1700 x 2550 mm Weight: 1200 kg Total Power Requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are an ideal solution for energy recovery in woodworking industrial and craft businesses. They have been developed specifically for heating larger utility areas, such as workshops and workspaces in craft and industrial settings. These hot air systems do not require long heat-up phases and can warm up the workshop, carpentry, joinery, or other production facilities within a very short time. Suitable fuels include solid wood and its by-products, e.g., offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24th, 1996, and the safety guidelines of Directive 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, and 350) comply with both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) regarding exhaust gas limits. - Automatic and continuous air operation - Thermal output: 233 kW Isdpfx Ajvz Hqgeg Rotd - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air flow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required installation space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connector): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet stubs: 2 x Ø 450 mm - For further technical data, please refer to the provided datasheet The 2 hot air outlet nozzles are located on the rear side of the furnace in the lower area. A maximum of 20 meters of ducting per outlet nozzle is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal energy utilization solution for woodworking industrial and craft businesses. They have been designed for heating larger operational areas, such as workshop halls and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up periods and can heat the carpentry or joinery workshop, as well as other production facilities, in a very short time. Solid wood and its by-products serve as fuel material, e.g., remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree N°459 of July 24, 1996, and the safety guidelines of Directive 89/392/EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air delivery rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2 – 0.3 mbar - Flue draft at rated output: 0.18 mbar Iedpfovz Hhxox Ag Retd - Heatable volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Required chimney draft: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet. The two pipe connectors for the outgoing hot air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ductwork per connector is permitted for air distribution.

Kondisi: baru, Tahun pembuatan: 2009, Wir verkaufen einen neuen Gasbrenner BINDER, Modell EUC 1168 ES.X-100-OCG. Iodpfx Asl Axqpsg Retd

Kondisi: sangat baik (bekas), Gas and oil burners, oil burner filter, heating oil filter, filter and deaerator unit, heating oil deaerator -Manufacturer: Oilon, filter and deaerator unit unused in original packaging -Type: Oilon Plus -Technical data: see photo of nameplate -Carton dimensions: 370/180/H150 mm Itodpfsmiqmrex Ag Red -Weight: 1.8 kg

Kondisi: baik (bekas), Tahun pembuatan: 1994, Electric heat exchanger, swimming pool heater, heat exchanger - 400 VAC, 26.0 A - Pressure: max. 3 bar - Dimensions: 980/180/H180 mm - Weight: 3.1 kg Isdob A H S Eepfx Ag Rstd

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, WTT-001 Itedpfxsghh Txo Ag Rsd

Kondisi: baik (bekas), Tahun pembuatan: 1981, Heater, burner, gas burner -Gas type: natural gas, liquid Ijdpfx Ajb A Iy Djg Rjtd -Gas connection: 20 mbar to 1000 mbar -Nominal thermal output: 3590 kW -Blower motor: 5.5 kW -Weight: 160 kg

Kondisi: sangat baik (bekas), Viessmann Vitoplex 300 low-temperature boiler with 500 kW output, 6 bar, 110°C. Year of manufacture: 2012. Itedpfx Asvzlkrjg Rod

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Used Vitoplex 300 heating boiler 130 kW Year of manufacture: 2001 Model: TX3 Output: 130 kW Iedpfx Agotu Txhe Rotd Inspection by appointment only! Preferred sale to dealers, businesses, or for export. All information is provided without guarantee; errors and prior sale excepted. The seller accepts no liability for typographical or data transmission errors. Of course, we can also handle all formalities. Loading available. Request more information.

Kondisi: sangat baik (bekas), Viessmann Vitoplex 700 kW, year 2012. Low-temperature boiler, compatible with biogas burner and oil burner (Weishaupt). On request, can be supplied in a sea container including all accessory parts, pumps, chimney, controls, and pipes. Itedpfx Ajnqyxlog Rsd

Kondisi: sangat baik (bekas), Tahun pembuatan: 1994, Weishaupt dual-fuel burner Weishaupt RGL60/6600kW burner Ijdpfx Agjm Hdyij Rstd

Kondisi: sangat baik (bekas), Ygnis U8000/6281kW heating boiler, Buderus, Loos, Bosch, Viessmann Itsdpfx Ajm Hbh Uog Rsd

Kondisi: sangat baik (bekas), Viessmann Vitomax 2100 kW boiler. Weishaupt incl. dual-fuel burner. Iedpfx Aomnqtcjg Rotd

Kondisi: sangat baik (bekas), Buderus GE315-140 kW heating boiler. Oil or gas (Weishaupt burner). Itedpfxjmnqcqo Ag Rsd

Kondisi: sangat baik (bekas), Weishaupt G11/1D gas burner, output 5100 kW. 2 units available. Stock items or used equipment from decommissioned companies, which were operational until closure. Inspection strictly by prior telephone arrangement! Preferred sale to dealers, commercial customers, or for export. All information subject to change, errors and prior sale excepted. The seller accepts no liability for typing or data transmission errors. Naturally, we will also handle all formalities. Loading and shipping possible. Ijdpoi Dw Hbofx Ag Rstd

Kondisi: sangat baik (bekas), Weishaupt Gas Burner G3/1D 7 units available Output: 630 kW Year of manufacture: 1997 to 2004 We speak Russian! Viewing only by prior telephone arrangement! Preferred sale to dealers, tradespeople, or for export. All information subject to change; errors and prior sale excepted. The seller assumes no liability for typing or data transmission errors. We are happy to purchase your used boilers or burners! Itjdpfoi Dh Icox Ag Rod Of course, we also take care of all formalities. Loading is possible.

Tahun pembuatan: 1990, Kondisi: sangat baik (bekas), Weishaupt dual-fuel burner GL5/1-D Year of manufacture: 1990 Inventory item or used equipment sourced from decommissioned companies that remained operational until closure. Itodpfx Aei Ar Ezeg Red Inspection by telephone appointment only! Preferred sale to dealers, commercial traders, or for export. All information provided without guarantee; subject to errors and prior sale. The seller accepts no liability for typographical or data transmission errors. Naturally, we handle all formalities for you. Loading and shipping available.

Kondisi: baik (bekas), Weishaupt RL30/2A, version EM, oil throughput 195 kg/h Isdeig Tw Eepfx Ag Retd

Tahun pembuatan: 2006, Kondisi: sangat baik (bekas), Gas burner Weishaupt WM-G30/2-A - version ZM-NR Output 300-2300 kW: Year of manufacture: 2006 With existing Dungs fittings DN50 We speak Russian! Viewing by appointment only! Preferred sale to dealers, commercial operators, or for export. All information provided without guarantee; subject to errors and prior sale. The seller accepts no liability for typing or data transmission errors. We are happy to purchase your used boiler or burner! Of course, we can also handle all formalities for you. Itsdpfxshl R U Uo Ag Rjd Loading possible.

Kondisi: sangat baik (bekas), Viessmann Vitoplex/105kw boiler suhu rendah dengan pembakar minyak Ijdpfjwauaxjx Ag Rotd

Kondisi: sangat baik (bekas), Weishaupt Gas Burner G40/1B-2A 6 units available Output: 2100-3450 kW Stock items or used equipment from decommissioned companies, which remained operational until closure. On-site inspection only by prior telephone arrangement! Preferred sale to dealers, commercial customers, or for export. Itedpfsi Dw E Ejx Ag Rsd All information provided without guarantee. Errors and prior sale excepted. The seller assumes no liability for typographical or data transmission errors. Of course, we will handle all formalities. Loading and shipping available.