Beli Sistem sudut bekas (33)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Unicontrol 12 Consisting of: Cross-cutting unit (Pos. A), Tenoning and slotting spindle (Pos. C), Transfer conveyor (Pos. I), Profiling spindle (Pos. L), Profiling spindle (Pos. N), Vertical profiling mill right (Pos. P) For the production of individual parts and components, either frame-based or in series production. Comprises a cross machining unit and a longitudinal machining unit connected by a transfer conveyor. Working width: 40-140 mm (see pressure fence left 40 - 140 mm) Working height: 40-120 mm Workpiece length min.: approx. 275 mm + 1 x end profile length Longitudinal machining: approx. 220 mm + 2 x end profile length Max. workpiece length: 3500 mm The dimensions of the parts depend on the machine configuration, type of production, and tooling setup. Final definition of part dimensions is only possible after receipt, review, and approval of the complete and final tooling layout drawings. Cross machining: Table feed motor power: 0.3 kW (0.4 HP) Feed speed when sawing, profiling, and in return preset: 3-25 m/min Vario table with (possible for studio/architectural window production) The clamping length of all tenoning and slotting spindles can be used without tool change gaps. Workpiece clamping by means of clamping bridge. Operated via a clamping cylinder installed under the table. Kdodpfeumci Ssx Aa Neg Length stop NC controlled, mounted on the slotting table. Studio window device swivel angle max.: +/- 75° Minimum workpiece length for angled windows depends on the angle and timber width. Possible part dimensions for angled window production: Angle Max. Min. Working width Workpiece length +/-75° 80 mm 800 mm +/-70° 120 mm 490 mm +/-60° 240 mm 360 mm +/-90° 350 mm 185 mm For angles greater than 60°, only counter processing Commission not documented 1) NC angle adjustment automatic for angled part machining Tear-out protection via follow-up counter along the entire spindle length of the tenoning and slotting spindle for 90° machining. Manually trackable counter-timber strip for angled part machining. 2) Additional counter timbers

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 5 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely inspected prior to delivery ----- Technical Data Summary (additional accessories possibly included upon request) Pos. 1: Crosscut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment pneumatically controlled in 8 positions, e.g., for edge rounding from above > Laser alignment light for recognizing the saw section Pos. 2: Rounding Unit Horizontal Bottom ----- > Position: horizontal bottom > Motor power: 1.5 kW Ksdpfxevu Hghs Aa Nedg > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9000 rpm > Max. tool diameter: 130 mm > Axial adjustment mechanically coupled to crosscut saw > Radial adjustment pneumatically controlled on/off NC-controlled length stop ----- > Length: 3500 mm > Electronic length stop Pos. 3: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless, NC-controlled > Spindle speed: 3,500 rpm > Max. tool diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 4: 1st Profiling Spindle (climb and conventional milling) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 7.5 kW Pos. 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash bar guide consisting of: Guide fence on the stop (area of climb-cut spindle), Sash bar support rail from above in the area of vertical right profiling unit and profiling spindle. Pos. 6: Profiling/Milling Unit, Horizontal Top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment: 30 mm, 8 positions > Radial adjustment: 125 mm, 8 positions Pos. 7: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions > Radial adjustment: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool diameter: 210 mm > Motor power: 3.0 kW Pos. 8: Profiling/Grooving Unit from Below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and thoroughly checked prior to delivery Technical Data Summary (Please enquire regarding any additional included accessories) Pos. 1: Crosscut Saw ----- > Electronic, horizontally adjustable crosscut saw (stepless) > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm Kdedpfxovu Hfqo Aa Nog > Motor power: 3.0 kW > Laser guide for saw cut identification > NC length stop, mounted on slot table included Positioning of the crosscut saw integrated into the control system. > Length: 3500 mm Pos. 2: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st Profiling Spindle (Climb and Conventional Milling) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially controlled pneumatically, 2 positions Sash bar guide consisting of: Guide rail at the fence (climb-milling spindle area), Sash bar support from above in the area of the vertical right profile milling unit and profiling spindle. Pos. 5: Horizontal Top Profile Milling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Additional Features ----- > Online capable > Rebating unit for tear-free rebating > Double part clamping kit > Return feed device for one-person operation: swivel belt > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Weinig type manufacturing program > Supplied without machining tools No original images yet available. Photos show a similar machine from our archive ----- Price for the above machine on request! ----- Option at extra charge: EUR 6,500.00 Note...

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, GUBISCH Centromat CW3 mesin bekas untuk pembuatan jendela dan pintu dengan poros Ø 50 mm pada pemprofilan memanjang Komponen berikut sudah diperbarui: Kabel energi dan kabel listrik ke meja slot Mat peredam pada pelindung Selang pneumatik Bantalan untuk piringan kontra Sisi penyambung di area memanjang Kjdpfx Aasxgqlus Nodg Encoder putar untuk spindle slot kedua Bantalan untuk meja slot PC telah dibersihkan dan dicek Berbagai silinder pneumatik Sabuk V

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, I am selling the SCM Multiflex window construction angle line. Milling heads: VIVALDI EU68 mm. Grooving and tenoning spindle on the right (tenoning side). 2 pcs. profile milling spindles plus glazing bead cross-cut saw on the left (profiling side). Kodpfx Aashw Dfys Nodg Available immediately.

Kondisi: baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 3.200 mm, diameter spindel: 60 mm, kecepatan spindel (maks.): 6.000 rpm, daya unit penggilingan: 7.500 W, kecepatan rotasi (maks.): 6.000 rpm, tinggi total: 600 mm, lebar yang dibutuhkan: 8.000 mm, persyaratan ruang panjang: 7.000 mm, berat keseluruhan: 15.500 kg, panjang spindle milling: 600 mm, diameter mata gergaji: 400 mm, daya: 70 kW (95,17 hp), tegangan masuk: 380 V, jenis penyesuaian ketinggian: listrik, daya motor pengumpan: 7.700 W, tinggi kerja: 120 mm, lebar kerja: 160 mm, Hochleistungs-Fensterfertigungsmaschine mit 2 Anzapfstationen sowie zwei rechten und einer linken Profilspindel; fertigt Direktfenster in Stärken von 68, 88 und 130 mm. Lieferung nach Vereinbarung. Ksdjtp Dngjpfx Aa Nodg

Kondisi: bekas, Tahun pembuatan: 1991, window manufacturing machine, angle centre, profiling and tenoning of window sashes Kdedjdm Umlepfx Aa Neg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, EN_WEINIG_Type_UNICONTROL_10_3_032-1136_Year_1993_Technical_Data _Cross_Cut_Saw_with_Four_Position_Turret_Synchronized_Laser_Guida nce_Vertical_Stroke_125_mm_Speed_2800_rpm_Spindle_diameter_40_mm_ Tool_diameter_350_mm_Clamping_Length_40_mm_Horizontal_Stroke_160_ mm_Motor_4_kW_Extraction_Port_80_mm_UNITEC_Slotting_Spindle_50_x_ 300_mm_3_Tools_Vertical_Stroke_2x100_mm_Speed_3500_rpm_Spindle_di ameter_50_mm_Tool_diameter_300-320_mm_Clamping_Length_300_mm_Moto r_11_kW_Extraction_Port_140_mm_UNIVAR_Milling_Spindle_50_x_285_mm _(with_and_against_rotation)_3_Tools_Vertical_Stroke_2x95_mm_Spee d_6000_rpm_Spindle_diameter_50_mm_Tool_diameter_232_mm_Clamping_L ength_285_mm_Horizontal_Stroke_80_mm_Motor_11_kW_Extraction_Port_ 140_mm_UNIVAR_Milling_Spindle_50_x_285_mm_3_Tools_Vertical_Stroke _2x95_mm_Speed_6000_rpm_Spindle_diameter_50_mm_Tool_diameter_232_ mm_Clamping_Length_285_mm_Horizontal_Stroke_80_mm_Motor_11_kW_Ext raction_Port_140_mm_Specifications_Working_Width_Min_30_mm_Workin g_Height_Min_30_mm_Working_Height_Max_with_Stroke_100_mm_without_ Stroke_120_mm_Feed_1.1_kW_Variable_6-12_m_min_TOOLING_SET_LEITZ_D ufix_IV-68_EURO-Window_Digital_Display_for_Studio_Window_Mechanic al_Length_Stop_Screen_Control_Twin_Workpiece_Package_Return_Rolle r_Conveyor_Machine_in_good_technical_and_visual_condition_NET_PRI CE_EUR_7_400_Plus_VAT_Delivery_EXW_Availability_short_term_by_agr eement_Inspection_by_appointment_Errors_and_prior_sale_reserved. Ksdpfowk U Rlox Aa Njdg

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 1 pc. Spindle diameter: 40 mm Small window production line consisting of: ----- 1) Haberkorn FZS1 slot milling machine 2) Okoma SF3F table milling machine with glazing bead saw 3) Oertli tooling for Haberkorn and Okoma machines Timber window: 1 set IV 68/78/88 and 1 set timber-aluminium window IV 68/78, year of manufacture 2011 4) Götzinger OBM Plus corner and handle drilling machine, Maco MultiMatic hardware (Hardware can be exchanged for an additional price upon request!) ----- Technical manufacturer description: - Haberkorn FZS1 slot milling machine with automatic feed, - Stepless height adjustment, D 40 mm Crosscut saw: - Spindle arrangement: top - Three-phase motor: 3 kW - Spindle diameter: 30 mm - Speed: 2800 rpm - Saw blade diameter: 400 mm - Automatic brake with speed monitoring - Horizontal positioning: pneumatic, manually adjustable - Guard and extraction hood with extraction port diameter: 100 mm Slot spindle D 40 mm: - Power: 7.5 kW - Speed: 4200 rpm - Usable length: 252 mm - Max. tool diameter: 340 mm - 220 mm travel, stepless height adjustment via precision recirculating ball screw spindles - Guard and extraction hood with extraction port diameter: 180 mm - Automatic brake with speed monitoring Stationary table: - Swivel range: +/- 65 degrees Kodpfx Ajxa Hi Nja Njdg - Automatically changing backing wood (programmable) - Pneumatic clamp - High-precision electronic angle display - Automatic longitudinal compensation - Backing wood always in the cutting plane at any angle position Special equipment: - Laser for workpiece positioning - Saw position pneumatic - Length stop LA 2500 mm + 1850 mm extension ----- 2) Okoma SF3F table milling machine with lift spindle, 3 tools - Extraction port 2 x 120 mm - Spindle length: 270 mm - Back fence rule with fine adjustment and turret head - Triple stroke, max. stroke height 90 mm - Glazing bead dividing saw with guard and extraction hood, 80 mm diameter - 8-roller power feed with stand and hold-down arm, required for glazing bead dividing saw setup - Pneumatic tilting device for edge gear, speed 6000 rpm - 2x 3 kW motors - Mounting diameter: 30 mm ----- 3) Oertli tooling for Haberkorn and Okoma machines - 1 set timber windows IV 68/78/88 - 1 set timber-aluminium windows IV 68/78 Sale of tools in the condition, scope, and with accessories as available in our warehouse. Note regarding window cuts, tool drawings, tool system listings: Fa. Engelfried assumes no liability that the tools actually available correspond to the specified and illustrated systems. ----- 4) Götzinger OBM Plus corner and handle drilling machine - Corner bearing and scissor stay + handle drilling - Vertical drilling unit with: - Quick-change drill head - Pneumatic feed via foot valve - 1x handle drill head, 24 mm - 1x double head for corner bearing - Maco MultiMatic hardware - 1x adjustable folding stop left with 6 stops - 1x adjustable folding stop right with 6 stops - 1x machine stand complete with tray - 220/400 V, 60 Hz, 1.3 kW - 1x roller track approx. 1 m long with 2 rollers - 1x roller track approx. 1.5 m long with 3 rollers ----- Price of the above machines on request! Plus packaging and shipping -----

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Used Weinig Unicontrol 6 window manufacturing line ----- For sale on behalf of a customer Manufacturer's description: For the production of individual components, elements, and small batches. Spindle arrangement: One cross-cut saw, one single-sided tenoning and slot spindle, one right-hand profiling spindle, one tenoning-slot spindle, and one profiling spindle suitable for stacking multiple tools on top of each other, equipped with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer into the continuous, chainless rubber roller feed of the profiling unit, feed height adjustment is manual. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifier for frame or sash outer dimension. Position control of the tools (longitudinal and cross machining) via rotary selector switch from the control panel. Technical specifications ----- Cross-Cut Saw ----- Number of tools: 1 Spindle speed: 2,800 rpm Spindle diameter: 40 mm Maximum tool diameter: 350 mm Motor: 3 kW Tenoning and slot spindle ----- Number of tools: 3/4 pcs. for timber thickness IV 68 - IV 92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 320 mm Motor: 11 kW Profiling spindle ----- Number of tools: 3/4 pcs. for timber thickness IV 68 - IV 92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 232 mm Motor: 11 kW Special equipment: Co-rotating spindle ----- Pneumatically actuated for splinter-free rebating of window sashes, frames, and doors. Spindle diameter: 50 mm, 4 kW Tool clamping length: 120 mm, tool zero diameter: 112-140 mm, Maximum tool diameter: 232 mm, spindle speed: 6,000 rpm Motor upgrade for co-rotating spindle from 4 kW to 7.5 kW Monitor-based control for 99 window types, 1 type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, frame mode, series mode, rebating. Data entry via keypad with integrated operator guidance and fault diagnosis. 1 grooving spindle from above ----- Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm, with keyway 10 x 4 mm Clamping length: 13 mm Clamping length: 40 mm Axial positions: 2 Radial positions: 2 Max. tool diameter: 130 mm Motor upgrade for grooving spindle from 2.2 to 3 kW 1 hardware milling unit, right: ----- For routing the hardware groove during rebating or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on control panel. Kedpfox Tu N Hox Aa Nodg Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool circle diameter: min. 140 mm, max. 180 mm Home position under table surface: 10 mm Hardware router in special design: Clamping length: 150 mm Axial stroke: 80 mm, 3 positions 3 tools Radial positions: 2 Motor upgrade for hardware milling spindle from 2.2 to 3 kW Hardware milling spindle for 230 mm tool diameter both in and above the table Electric height adjustment of the feed with selector switch on the control panel for 2 wood dimensions, including...

Kondisi: bekas, Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, Mesin pembuat jendela Pabrikan: Okoma Tipe: UF1 S Tahun: 1988 dengan alat Kdjdpfxeybbfps Aa Nsg

Kondisi: baik (bekas), working width 230 mm working height 120 mm spindle diameter 40 mm 4 heads + unit for glazing bead cutting control via ATS panel head adjustment in two axes electric adjustment of the pressure beam variable feed speed control Kdsdpovtt Ayjfx Aa Njg The machine was operating in line with other machines.

Kondisi: bekas, Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, diameter spindel: 50 mm, langkah spindel: 100 mm, daya: 11 kW (14,96 hp), 1 Ksdpsx Sy Ncsfx Aa Nsdg

Kondisi: bekas, Tahun pembuatan: 2000, Lokasi gudang: Nattheim Kdsdpfxsvwdmws Aa Nsg

Kondisi: bekas, Tahun pembuatan: 1985, Berat: sekitar 3000 kg Dimensi: sekitar 3700 x 2000 x 1600 mm Lokasi penyimpanan: Nattheim Kjdpjvvi Ttjfx Aa Nedg

Kondisi: bekas, Tahun pembuatan: 2007, Slot spindle 3 units Number of milling units: 5 units Spindle diameter: 50 mm Control: Control 100 PC SCM Windor 100 CNC ----- High-performance and flexible CNC machining center for windows and doors Processing of workpieces up to a maximum length of 4,500 mm, 250 mm width and 150 mm thickness Consisting of Windor 60 Version B Infeed conveyor Slot machining section: ----- Pos. 1: Crosscut saw ----- - Motor: 4 kW - 3,000 rpm - Spindle diameter: 40 mm - Maximum tool diameter: 400 mm, bore: 80 mm Pos. 2: 1st slot spindle ----- - High-performance spindle with upper bearing, spindle length: 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 3,500 rpm - Maximum tool diameter: 370 mm - Counter unit "Jolly" - Infinitely variable vertical positioning - Interpolating rotation, automatic tilt window feature +/- 60 degrees Pos. 3: Electro spindle with HSK 63 F tool holder ----- - Min/max. speed: 1,000-12,000 rpm - Maximum motor power: 11 kW - Water cooling - Rapid 24 automatic tool changer with 24 positions Pos. 4: 2nd slot spindle ----- - High-performance spindle with upper bearing, spindle length: 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 3,500 rpm - Maximum tool diameter: 370 mm - Counter unit "Jolly" - Infinitely variable vertical positioning - Interpolating rotation, automatic tilt window feature +/- 60 degrees Pos. 5: 3rd slot spindle ----- - High-performance spindle with upper bearing, spindle length: 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 3,500 rpm - Maximum tool diameter: 370 mm - Counter unit "Jolly" - Infinitely variable vertical positioning Fleximat ----- Including left and right stops with horizontal CNC adjustment for the following through-feed operations: Lock case milling and 9-degree Anuba hinge drilling from the right. Dowel drilling and strike plate marking from the left and right, each with 7 spindles. Cup hinge drilling and olive handle drilling from above. Profile machining section ----- Pos. 5: Power 2000 F4: Electro spindle with HSK 63 F tool holder ----- - Operates from the left - Min/max. speed: 1,000-18,000 rpm - Maximum motor power: 12 kW - Water cooling Kedpfx Aasw Im Iie Nodg - Rapid 24 automatic tool changer with 24 positions Pos. 6: 1st profile spindle from the right ----- - High-performance spindle with upper bearing, spindle length: 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 6,000 rpm - Tool diameter min./max.: 130–250 mm - Infinitely variable vertical positioning - Infinitely variable horizontal positioning Pos. 7: 2nd profile spindle from the right ----- - High-performance spindle with upper bearing, spindle length: 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 6,000 rpm - Tool diameter min./max.: 130–250 mm - Infinitely variable vertical positioning - Infinitely variable horizontal positioning Pos. 7: 3rd profile spindle from the right ----- - High-performance spindle with upper bearing, spindle length: 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 6,000 rpm - Tool diameter min./max.: 130–250 mm ...

Kondisi: baik (bekas), 0272 STETON TF 5 – Working Centre for Door and Window Frames Technical Data: Cut-Off Saw: - Blade diameter: 400 mm F30 - Blade speed: 3,000 rpm - Pneumatic horizontal blade movement - Motor power: 3 Hp Tenoning Shaft: - Shaft length: 490 mm - Motor power: 10 Hp - Speed: 3,000 rpm - Spindle diameter: 50 mm - Tool diameter: 350 mm - Vertical spindle stroke: 450 mm Tenoning Carriage: - Feed speed: 5/22 m/min - Carriage dimensions: 350 x 685 mm - Workpiece length min/max: 320 / 2,600 mm - Workpiece width min/max: 20 / 200 mm - Workpiece thickness min/max: 20 / 120 mm Profiling Side: - 1st profiling jumping spindle (chipbreaker) - Spindle length: 325 mm - Spindle diameter: 50 mm - Motor power: 5.5 Hp - Number of positions: 4 - Max tool diameter: 220 mm Main Profiling Shaft: - Shaft length: 490 mm - Motor power: 10 Hp - Speed: 6,000 rpm - Vertical spindle stroke: 450 mm - Max tool diameter: 220 mm Glazing Bead Unit: - Blade diameter: 180 mm - Spindle diameter: 30 mm - Speed: 6,000 rpm - Motor power: 3 Hp Additional Trolley Hardware Grooving Spindle: Kedex Itqfopfx Aa Nedg - Motor power: 3 Hp - Spindle diameter: 40 mm - Tool diameter: 180 mm Dust extraction port diameter: 120/80 mm Compressed air requirement: 6-7 bar Overall dimensions: 2,300 x 2,800 x 1,900 mm (H) Weight: 2,250 kg

Kondisi: bekas, Slot spindle 2 pcs. Number of milling units: 7 Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial NC spindles, as well as VARIO table and trimming carriage Kedpfsx H Al Njx Aa Nodg ..... Machine properly dismantled and stored at our warehouse in 73447 Oberkochen. Video and pictures were taken prior to disassembly. Technical Data Summary (Please inquire separately for any potentially included accessories) ..... Cross-cut saw ..... > Cross-cut saw, electronic, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser guide light for identifying cutting section > Axial adjustment travel: 150 mm, NC axis, electronically infinitely adjustable > Radial adjustment: pneumatic, 8 positions, e.g. for top edge rounding Rounding unit ..... > Position: horizontally bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment: mechanically linked with cross-cut saw. > Radial adjustment: pneumatically controlled On/Off electronic length stop ..... > Length: 4,500 mm 1st tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm, NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter hold, complete clamping length is counter-supported 2nd tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm, NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter hold, complete clamping length is counter-supported Transfer belt ..... For transfer of parts to longitudinal processing, including double-part separation before infeed to longitudinal processing. 1st profiling spindle (climb and conventional milling) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm, NC axis, infinitely adjustable > Radial adjustment travel: 80 mm, NC axis, infinitely adjustable > Spindle speed: 6,000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm > 2 feed rollers opposite to spindle, axially pneumatically controlled, 8 positions > Table plate pneumatically adjusted to tool diameter 2nd profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm, NC axis, infinitely adjustable > Radial adjustment travel: 80 mm, NC axis, infinitely adjustable > Spindle speed: 6,000 rpm ...

Kondisi: bekas, Weinig Unicontrol 10 (UC 10) angle processing line for the production of windows, components, and doors. Suitable for frame-based, series, or single-part production, featuring 2 tenoning and mortising spindles, including Oertli tool set. - Units/equipment: Kdjdpfjv Ag Tdox Aa Nog 1. Crosscut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and mortising spindle, NC axis, ø 50 mm, 15 kW, Clamping length: 640 mm (8 x 80 mm) 3. Second tenoning and mortising spindle, NC axis, ø 50 mm, 11 kW, Clamping length: 400 mm 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, Clamping length: 4 x 80 mm 5. Profile milling unit, horizontal, from above, 3 kW 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, Clamping length: 4 x 80 mm 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, Clamping length: 400 mm 8. Profile milling unit, vertical right, 3 kW 9. Profile milling unit, vertical right from above, 3 kW 10. Profile milling unit, horizontal from below, NC axis, 3 kW - Twin part package - Rebating package with rebate carriage - Automatic turning system - NEXUS PC control - CNC-controlled length stop - Studio window configuration - Unit for bottom edge rounding with crosscut saw - Glazing bar support rail - Including extraction duct system - Including Oertli tool set - Further technical data and tooling diagrams available on request.

Kondisi: bekas, Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, hentian panjang: 3.200 mm, diameter alat: 400 mm, diameter spindel: 50 mm, langkah spindel: 640 mm, kecepatan spindel (maks.): 3.000 rpm, panjang spindle milling: 320 mm, diameter mata gergaji: 400 mm, jenis penyesuaian ketinggian: listrik, jenis arus masuk: AC (pendingin udara), tinggi kerja: 130 mm, lebar kerja: 200 mm, SCM Windor 60/100 – Angle Processing Centre Manufacturer: SCM Group Year of manufacture: 2005* 1. General Description of the System The subject system is a window and door production line, type Windor 60/100 by SCM Group, year of manufacture 2005. This is a CNC-controlled angle processing centre for industrial machining of frame and sash components. The system is designed for series production and enables precise, repeatable processing in integrated process steps. 2. Main Components of the System 2.1 Angle Processing Centre SCM Windor 60/100 The SCM Windor 60/100 is of modular construction and designed as an angle machining unit. Machining is carried out on a tenoning side and a profiling side, arranged at right angles to each other. The system combines several machining steps such as milling, drilling, grooving, rebating, and tenoning in a continuous, CNC-controlled process. Key features: * CNC multi-sided machining * Several milling and machining spindles * Automated tool guidance and tool change * High dimensional and repeat accuracy 2.2 Fleximat Drilling Centre The Fleximat drilling centre is integrated into the production line and provides precise drilling operations for joints and fittings. Machining is CNC-controlled with vertical and horizontal drilling units. 2.3 Profiler Centre The profiler centre is designed for profile-forming milling operations and consists of two machining sides: Right side: * Lifting spindle with height adjustment * Suitable for variable profile and contour machining Left side: * 24-position tool changer * Automatic tool change to minimise setup times * Suitable for complex profile milling 2.4 Löwer Wide-Belt Sander A wide-belt sander from Löwer is integrated into the production line. Ksdpfx Aex Nqqxsa Njdg The machine is solely used for surface sanding to improve the surface quality of the processed components. 3. Control, Operation, and Safety The system is equipped with CNC control, managing all machining operations, tool changes, as well as feed and spindle movements. Operation is semi-automated or fully automated by trained personnel. The safety equipment corresponds to the state of the art at the time of installation (year of manufacture 2005) and includes in particular: * Mechanical safety devices and enclosures * Emergency stop devices * Safety interlocks on moving machine parts 4. Optional Extension: SCM Topset XL Planer (10-spindle) To expand the existing machinery, the installation of an SCM Topset XL planer with 10 spindles is planned. The machine will be operated as an independent processing station at a separate location within the production hall and will not be integrated into the Windor system’s CNC control. The system is available and can be dismantled at any time. Dismantling and transport must be organised by the purchaser. Available from: 07/01/2026

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm # 6975 Weinig Unicontrol 6, Year 1995, with electronic length stop and tilt conveyor ..... Sale on behalf of customer. Images are from our archive and were taken before the machine was delivered to the customer. Technical Data Summary (additional included accessories upon request) ..... Ksdpfx Aajx Dngwe Nsdg Cross-cut saw ..... > Cross-cut saw, pneumatic, with revolver stop: > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 350 mm > Motor power: 3 kW > Laser line for cut detection Length stop ..... > Electronic length stop 1st Tenoning and slotting spindle ..... > Number of tools: 3/4 pcs. > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for timber thickness IV 68-92 > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW 1st Profiling spindle – synchronized spindle (climb and conventional milling) ..... > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. cutting circle: 232 mm > Motor power: 7.5 kW 2nd Profiling spindle ..... > Position: vertical right > Number of tools: 3/4 pcs. > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for timber thickness IV 68-92 > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. cutting circle: 232 mm > Motor power: 11 kW 3rd Profiling spindle (hardware spindle) ..... > Position: vertical right > Number of tools: 3 pcs. > Spindle speed: 6,000 rpm > Spindle diameter: 40 mm > Max. cutting circle: 180 mm > Motor power: 3 kW 4. Grooving unit, horizontal-vertical indexed ..... > Position: horizontal, top > Number of tools: 1 pc. > Tool clamping length: 40 mm > Spindle diameter: 40 mm > Max. cutting circle: 130 mm > Motor power: 3 kW Additional features ..... > Rebating device for tear-free...

Kondisi: sangat baik (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, Weinig Unicontrol 10 Year of manufacture: 1996 Technical condition: very good Ksdpfxjwbikbj Aa Nodg Description: The Weinig Unicontrol 10 is an automatic CNC machine designed for planing and profiling wooden components, especially used in the production of window and door joinery. It combines four-sided planing with highly accurate profiling functionality. Main features: ✅ Automatic adjustment of spindles and guides via CNC system ✅ Very high machining precision – ideal for series production ✅ Rapid machine setup changes due to profile setting memory ✅ Robust and durable frame construction ✅ Suitable for processing various types of wood – both soft and hard Included in the set: Weinig Univar 6 (year of manufacture: 1996, in very good condition).

Tahun pembuatan: 1997, Kondisi: sangat baik (bekas), Window manufacturing machines WEINIG Tenoning and slotting machine UNITEC 10, year 1997 Ksdpfeiix Uvsx Aa Njdg Profiling and counter-milling machine UNIVAR 10, year 1997

Kondisi: bekas, Grooving spindle 1 pc. Number of milling units: 5 pcs. Spindle diameter: 50 mm Weinig Unicontrol 12 with radial and axial NC spindles as well as VARIO table and transverse milling carriage ... Machine still in operation – inspection possible! Optionally available with used tools and window construction software for data transmission to the Unicontrol 12! Technical data summary (additional included accessories upon request) ... Cross-cut saw ... > Electronic cross-cut saw, infinitely variable horizontal adjustment > Number of tools: 1 pc. > Spindle speed: 3,000 – 6,000 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for saw cut detection > Axial adjustment: 150 mm NC axis, electronically infinitely variable > Radial adjustment: pneumatic, 8 positions for e.g. edge rounding from above Rounding unit ... > Position: horizontal, below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment mechanically coupled with cross-cut saw > Radial adjustment pneumatically controlled on/off electronic length stop ... Kodpfxjxwdv Ij Aa Nodg > Length: 4,100 mm 1st tenoning and grooving spindle ... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment: 580 mm NC axis, infinitely variable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter rotation, full clamping length is counter-supported Transfer belt ... For transferring parts to longitudinal machining including splitter station for double parts before entry into longitudinal machining. 1st profiling spindle (climb and conventional milling) ... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment: 350 mm NC axis, infinitely variable > Radial adjustment: 80 mm NC axis, infinitely variable > Spindle speed: 6,000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm > 2 feed rollers opposite the spindle, axially pneumatically controlled, 8 positions 2nd profile milling unit (grooving unit from above) ... > Position: horizontal, above > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment: 30 mm, 8 positions > Radial adjustment: 125 mm, 8-position turret > Spindle speed: 9,000 rpm > Max. tool cutting circle: 130 mm 3rd profiling spindle ... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment: 350 mm NC axis, infinitely variable > Radial adjustment: 80 mm NC axis, infinitely variable > Spindle speed: 6,000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: ...

Kondisi: sangat baik (bekas), CNC Window Processing Centre. Kodpfxjwmxkhs Aa Nsdg