Bale press

HSM 4809

Kondisi: siap digunakan (bekas), Mesin Press Balok Hsm HL 4809 LI - Bukaan pengisian besar, ideal untuk kotak berukuran besar - Dump kontainer untuk pengisian yang nyaman Tekanan dalam kN: 480 - Tegangan/frekuensi: 3 x 400 V / 50 Hz Bcedpfxora Dddj Ahwsw - Berat balok dalam kg (tergantung material): hingga 400 kg - Dimensi balok (panjang x lebar x tinggi dalam mm): 1200 x 1100 x 750 - Dimensi mesin (panjang x lebar x tinggi dalam mm): 5648 x 1849 x 2515 Waktu siklus kosong dalam detik: 53 - Pengikatan manual: 4 kali dengan kawat

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Gewicht 4.950 kg, Gesamtgewicht 12.000 kg 5,5 kW Bedpfxswpmcks Ahwscw

Kondisi: belum diuji (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, panjang bal: 1.000 mm, lebar bal: 750 mm, tinggi bal: 750.750.750 mm, berat bal: 500 kg, tegangan masuk: 400 V, berat keseluruhan: 7.500 kg, kapasitas tangki oli: 500 l, daya: 30 kW (40,79 hp), berat kosong: 7.500 kg, frekuensi input: 50 Hz, Manufacturer: Pal Pacomat V Year of manufacture: 1985 Main press force: 50 t Specific pressing force: 5 kg/cm² Bcjdpfsic Rl Dsx Ahwjw Feeding channel: 1,000 x 720 mm (L x W) Theoretical throughput capacity: 200 m³/h Bale size: 700 x 1,000 mm (W x H), length adjustable Drive motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8 t The hydraulic unit is functional, the drive motor is currently removed.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, jam operasional: 2.632 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 29.381, gaya penekanan: 35 t, lebar bukaan pengisian: 620 mm, panjang bukaan pengisian: 1.000 mm, lebar total: 2.380 mm, tinggi total: 2.500 mm, panjang total: 6.625 mm, Termasuk sabuk pengumpan. Mesin siap digunakan segera. Bcsdovaw T Ajpfx Ahwsw

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 38 t, daya: 5,5 kW (7,48 hp), Neu auf Lager Avermann MPC 20 PEL Optional mit Behälterlift Bcedpfx Aswhfu Aohwow

Kondisi: baik (bekas), Tahun pembuatan: 1973, Waste compactor container, garbage compactor, compactor container, waste container, self-compacting container, mobile waste compactor, paper compactor container, paper container - Stationary press for: roll-off containers - Feed chute: covered - Pressing operation: hydraulic - Pressing operation: automatic - Emergency stop switch: at the feed chute - Ram dimensions: 1450 x 650 mm - Ram stroke: 1100 mm - Transport dimensions: 2100 x 4500 mm - Side screw ratchets for skip containers Bcedpfsb A Ii Sjx Ahwjw - Function tested

Kondisi: siap digunakan (bekas), HSM VK 42/1200 fully automatic baler Pressing force: 42 tons Bale dimensions: 700 x 800 x 600 - 1200 mm Bale weight: approx. 450 kg Baler length: approx. 7 meters Baler weight: approx. 6,000 kg Automatic 4-fold wire tying Bcodpfxjra Nrxs Ahwew

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Balemaster Year: 2006 Type: CMG 268 Bedpfx Aherdwlkewscw Waste baler

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, arus masuk: 238 A, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Bcjdpjvf E Avjfx Ahwsw Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: W230-028, gaya penekanan: 80 t, masa garansi: 24 bulan, tekanan: 250 batang, daya: 45 kW (61,18 hp), tahun perombakan terakhir: 2024, Perlengkapan: dokumentasi / manual, This fully refurbished baler is offered for sale by Bollegraaf Recycling Solutions. Bedpfxstvat Te Ahwjcw The machine in question is an HBC80 baler (45kW) with vertical tying. This baler has been completely refurbished in our dedicated refurbishment workshop. The refurbishment has been performed in accordance with the stringent Bollegraaf OEM Refurbishment Guidelines. Following refurbishment, this baler is sold with a 2-year warranty included. The press is supplied with the following options: * support frames, * intermediate hopper, * bale exit chute, * wire spool platforms.