Beli Kragarmregal Doppelseitig Höhe 3.500 Mm Rak Kantilever bekas (81.031)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Used double-sided cantilever racking: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided uprights, height 3,500 mm, with bases, each 1,200 mm - 24 cantilever arms, 1,200 mm deep, standard - Incl. longitudinal and diagonal bracing for 1,300 mm axle spacing - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including mounting material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Hodpfemkixwox Amujn Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification before delivery. Material is packed sensibly for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subsoil must be concrete, level, suitable for doweling, and able to withstand the loads. The floor condition, bearing capacity, and any required building permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to occupational health and safety, it is recommended that the racks have a projection of at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack used: Bolt system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,500 mm with base 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Fastening materials (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) Hjdpfxjmhh Dhj Amuon - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With installation instructions and C4 load signs according to DIN standard - Telephone expert advice - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchoring and able to bear the acting loads. Floor properties and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The rack uprights must be anchored in the floor on-site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum stand-off of 500 mm to the upper edge of the upright on the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm Hedpfx Ash Ek Dajmuen - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Screw system in hot-dip galvanized version: Ex-works price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms adjustable in height in 100 mm increments Hjdpfjmhhl Hox Amujn Each upright with 3 bolted cantilever arms, usable depth 1,200 mm as standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Includes fixing material (without floor anchors) With assembly instructions and load capacity labels C4 in accordance with DIN standard

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en1 Hsdpfemhhypox Amuon

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, usable depth 1,000 mm - 12 cantilever arms, usable depth 1,000 mm, standard - Including horizontal and diagonal braces for 1,300 mm bay distance - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions possible at any time) - (*Offer available in larger quantity: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm bay distance Hodpfxsmhh Dze Amuen - Rack length = 4,000 mm - Including fasteners (without floor anchors) - With assembly instructions and C4 load capacity labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance notification prior to delivery. The material is sensibly packed to facilitate easy unloading. If installed outdoors, the load capacities are reduced due to wind and snow load. The subfloor must be concrete, level, and suitable for anchor fixing, and must support the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither required nor recommended. According to professional association guidelines, the top storage level should have at least a 500 mm overhang above the top of the upright.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever rack: bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Includes horizontal and diagonal bracing for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension always possible) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm Hjdpomhhx Ijfx Amuon - Fastening material included (floor anchors not included) - Includes assembly instructions and C4 load labels according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notification before delivery. The material is carefully packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for anchors, and able to accommodate the acting loads. The customer is responsible for checking and ensuring the floor quality, load-bearing capacity, and for obtaining any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to German professional association recommendations, the rack uprights should have a minimum overhang of 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (floor anchors not included) - With assembly instructions and load labels C4 according to DIN standard - Technical telephone support - Made in Germany - Short delivery times Hodpfx Amsmhhyajujn - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freighting with pre-delivery notification. Materials are packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for anchoring, and able to absorb the acting loads. The customer is responsible for checking and ensuring the condition and load-bearing capacity of the subfloor as well as any permits required by authorities. Rack uprights must be anchored to the ground on-site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have a minimum overhang of 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized finish Hedpfxemhh Ans Amujn Scope of delivery: - 4 rack uprights, height 3,000 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standards - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for doweling, and capable of bearing the applied loads. Floor condition and load capacity as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the trade association, it is recommended that the uppermost storage level has at least 500 mm clearance above the top edge of the upright.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal braces for 4,000 mm racking length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Replacement parts available for reorder and expansion at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg Hodpomhhf Sefx Amusn - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes horizontal and diagonal braces for 1,300 mm upright spacing - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - Onsite collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for anchoring, and capable of supporting all applied loads. The customer is responsible for checking and ensuring subsoil condition, bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights have a minimum protrusion of 500 mm above the highest storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking, painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 rack uprights, height 4,200 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms, each with 1,200 mm usable depth - Longitudinal and diagonal braces for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts and extensions available for reorder at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 730 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load capacity badges C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipments with advance notice prior to delivery. The material is packed sensibly to enable easy unloading. Delivery can take place approx. 1 - 2 weeks after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowelling, and be able to withstand the imposed loads. Soil composition, bearing capacity, and any required official approvals must be checked and ensured by the customer. Hjdpfsmidyfex Amusn Rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to the professional association’s recommendations, the top storage level should extend at least 500 mm above the top edge of the uprights.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal bracing for a rack length of 4,000 mm (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Hsdpsmhh Dtjfx Amuen Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight with prior notification before delivery. The material is sensibly packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The surface must be level concrete, suitable for dowelling, and able to bear the acting loads. Floor condition and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the ground by the customer; wall anchoring is not required and not recommended. According to trade association recommendations, the uprights should extend at least 500 mm above the highest storage level.

Kondisi: baru, The double-sided cantilever racking system from BLT, with a height of 315 cm, is ideally suited for the storage of medium-weight long goods such as profiles, pipes, and rods in the warehouse, workshop, or craft business. With an approximate shelf length of 5.12 m, a usable depth of around 80 cm, and a total of 5 levels per side including the base level, this cantilever rack provides clear and easily accessible storage locations for long and bulky goods on both sides. Each cantilever arm can bear up to 500 kg, with each upright carrying up to 1800 kg per side. The bolted cantilever arms with impact guards ensure robust, practical use in everyday operations. Made in Germany – Freight within Germany already included, plus VAT. Product details: - Rack type: Double-sided cantilever rack - Height: approx. 315 cm - Length: approx. 5.12 m - Total depth: approx. 174 cm - Bay width: approx. 128 cm - Cantilever arms: approx. 80 cm usable length (IPE80) - Usable depth of base level: approx. 80 cm - Load per arm: max. 500 kg (with evenly distributed load) - Load per upright: max. 1800 kg per side (without base level, with evenly distributed load) - Levels per side: base + 4 storage levels (5 levels per side in total) - Design: Double-sided, bolted cantilever arms with impact guard - Upright profile: IPE140 - Cantilever arm profile: IPE80 - Colour finish: RAL 7016 - Manufacture: Made in Germany - Delivery: Freight within Germany included, plus VAT Scope of delivery: - 5 × uprights made from IPE140, height approx. 3150 mm - 40 × cantilever arms approx. 80 cm long, made from IPE80 - Incl. fastening materials - Incl. heavy-duty anchors for floor fixing Advantages of the BLT cantilever rack: - Ideal for storing medium-weight profiles, pipes, and bars - Double-sided design provides usable and easily accessible storage on both sides - Bolted cantilever arms with impact guard - 5 levels per side including base level for optimal use of storage capacity - Up to 500 kg load capacity per arm and up to 1800 kg per upright per side Hedpfx Ajzaq S Njmuen - Secure floor anchoring with supplied heavy-duty anchors - Made in Germany - Freight within Germany already included Delivery: - Freight within Germany already included - Delivery includes fastening materials - Secure floor anchoring with supplied heavy-duty anchors Enquiries & custom planning: Take advantage of our personal consultation service for your bespoke storage solution. Let us know your required dimensions, types of goods to be stored, and available space. Our experienced professional consultants will be happy to provide you with a non-binding offer including tailor-made planning and structural calculation for your custom cantilever rack system. Use our enquiry list or contact us directly by phone. Together, we will plan your bespoke racking solution.

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, This single-sided heavy-duty cantilever rack is ideal for storing heavy long goods such as pipes, profiles, metal bars, steel beams, wooden slats, and sheet material. With a total length of approx. 13.20 linear meters, a height of approx. 4.00 m, and arms of approx. 120 cm, this long goods rack offers high storage capacity across 4 storage levels in total (base level + 3 levels). Each cantilever arm supports up to 500 kg, and each upright can handle loads up to 2,250 kg. The cantilever arms are bolted and can be flexibly adjusted in height using a 200 mm perforated grid. The completely hot-dip galvanized material provides long-lasting protection for both indoor and outdoor use – new stock available from Wietmarschen. PRODUCT DETAILS: - Rack type: single-sided heavy-duty cantilever rack - Total length of rack row: approx. 13.20 m - Total height: approx. 400 cm - Arm length: approx. 120 cm (made from IPE 80) - Upright spacing: approx. 131 cm - Levels: base level + 3 storage levels - Load capacity per arm: max. 500 kg (with evenly distributed load) - Load capacity per upright: max. 2,250 kg (with evenly distributed load) - Upright profile: IPE 160, approx. 400 cm, including base - Upright perforation grid: approx. 20 cm - First perforation above base: approx. 107.5 cm (top of base) - Top perforation pair: approx. 50 cm below top of upright (top of upright) Hedpezatr Sjfx Amujn - Design: single-sided, arms bolted - Finish: completely hot-dip galvanized - Availability: new stock SCOPE OF DELIVERY: - 11 x uprights, approx. 400 cm, made from IPE 160, including base, 20 cm perforation grid - 33 x cantilever arms, approx. 120 cm, made from IPE 80 (without stoppers) - Includes all connecting elements - Includes all required bolts - 1 x load capacity sign Price: 5,750.00 € net 6,842.50 € gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Delivery throughout Germany by our partner freight forwarder – shipping costs depend on postal code - Professional installation and dismantling by trained teams available on request - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be pleased to provide you with a non-binding, customized offer tailored to your requirements. Whether new build, conversion, or extension – we offer expert advice for your rack configuration. Haven't found the right product yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Contact us by message or phone. You can find our phone number on our company page. Our telephone hours are Monday to Friday, 08:00 - 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Kondisi: baru, Double-Sided Cantilever Rack, New Specifications: - Height: approx. 400 cm - Width: approx. 256 cm - Length: approx. 18.45 linear meters - Cantilever arms: approx. 120 cm - Axle distance: approx. 131 cm - New stock direct from factory - Double-sided - 500 kg load capacity per arm Hedpfx Ajzar D Tjmuen - 2250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms bolted - Arms adjustable in 200 mm increments - Levels: base + 4 storage levels (5 storage levels total) - Delivery time approx. 4 weeks Rack includes: - 15 x double-sided uprights, incl. base, approx. 400 cm made from IPE160 - 120 x cantilever arms, approx. 120 cm, made from IPE80, without deflectors - Includes all necessary connectors and bolts Why BLT cantilever racking? - Certified German manufacturer per DIN EN 1090 – Made in Germany - All specified load capacities of the rack uprights and arms are statically verifiable at 100% load - All racking units are supplied in hot-dip galvanized finish, suitable for both indoor and outdoor installation, and resistant to rusting unlike painted systems. Consistent appearance for many years - We use legally required hot-dip galvanized bolt sets in accordance with DIN EN 15048-1 - Long-term availability of replacement parts guaranteed - Upright base and back are welded together for extra safety and reduced assembly times (no need to bolt base and back together) - Bracing made from angle steel eliminates the need for turnbuckles, thereby reducing assembly time - No slotted hole system, thus no weakening of the upright profile Price: €12,450 net, plus applicable VAT. You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged by our logistics partner upon request. Costs depend on the destination postal code. Assembly: Our trained staff are happy to assist with professional installation and dismantling of your warehouse equipment as needed. Our recommendation: Let us know your requirements... We are happy to help you realize your projects, from planning and ordering to final assembly.

Kondisi: siap digunakan (bekas), CANTILEVER RACK DOUBLE-SIDED | HEIGHT 200 CM | 200 KG PER ARM Hsdpozaq Scsfx Amujn This double-sided cantilever rack is ideally suited for storing lightweight long goods such as pipes, profiles, battens, laths, rails, and other bulky materials in warehouses, workshops, or craft businesses. With a height of approx. 200 cm and cantilever arms of approx. 50 cm, the rack provides clearly structured and easily accessible storage spaces on both sides. Thanks to 6 storage levels per side, including the base, it offers ample storage space while requiring minimal footprint. Each cantilever arm can support up to 200 kg. Its robust construction ensures reliable performance in everyday operations. FREE DELIVERY WITHIN GERMANY IS INCLUDED IN THE PRICE. PRODUCT DETAILS: - Rack type: double-sided cantilever rack - Total length of rack row: approx. 3.91 m - Overall height: approx. 2,000 mm - Usable arm depth: approx. 500 mm - Usable depth of base level: 525 mm - Total depth: 1,150 mm - Bay width (upright spacing): approx. 1,250 mm - Load capacity per arm: max. 200 kg (with even load distribution) - Load capacity per upright: max. 1,000 kg (with even load distribution) - Storage levels per side: base + 5 - Specification: double-sided, arms & anti-roll-off stops solidly welded - Colour finish: RAL 7016 (anthracite grey) - Connectors & bracing: galvanized SCOPE OF DELIVERY: - 04 x uprights incl. base sections made of IPE100, height approx. 2,000 mm - 40 x cantilever arms, approx. 50 cm long, made of RR 50x30x2 mm - Includes all bracing and required bolts - Includes heavy-duty anchors Price: €1,229.00 net incl. delivery. €1,462.51 gross incl. delivery. You will receive an invoice with VAT shown separately. Delivery included: Nationwide free delivery within Germany, excluding islands. Fast handling and prompt shipping upon receipt of order. INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. You will find our phone number on our company page. We are available by phone Monday to Friday, 08:00 - 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Kondisi: baik (bekas), Here is the English translation with professional, industry-specific terminology: Over 50 meters of this type in stock, OHRA cantilever racking – new! Negotiation price: €3,290.00 net You are bidding on a rack approx. 14 m long, consisting of: - 10 uprights with base, 2.5 m high - 5 adjustable arms per upright (60 cm each), load capacity 300 kg per arm - Diagonal bracing, cross bracing, and spacers are included Frame spacing/bay width: 150 cm Arm length: 60 cm Load capacity: 300 kg per arm Load capacity per upright per side: 1,500 kg Over 100 meters available Heights available: 2.5 m, 4 m, or 6 m Other configurations available on request. (Subject to changes and errors in technical data, specifications, and prices. Sale subject to prior sale! See our general terms and conditions. All prices excl. VAT, ex stock.) Purchase / Sale: We are constantly seeking and offering numerous items from a wide range of sectors: - Machinery from all industries - Stocklots - Special offers Hjdpfx Aebvmctjmuon - Swept-clean plant clearances - Company liquidations - Surplus stock purchase Fast – flexible – efficient! We also clear and/or dispose for insolvency administrators. Send us a message with a few keywords and we will get back to you promptly.

Kondisi: baik (bekas), Cantilever racking OHRA 3 m high Over 100 m in stock, see pictures. Height: 3 m Arms: 100 cm Load capacity per arm: 800 kg 4.5 running meters, 4 uprights with arms Negotiable price: €2,360 net Offer includes: 4 uprights with base, 3 m high 4 adjustable arms per upright, each 100 cm, load capacity 800 kg/arm Hjdpocd Dwyofx Amuon Diagonal bracing, stiffening and spacers included. Frame spacing: 150 cm Load capacity per upright, per side: 3,200 kg Heights of 2.5 m, 4 m, or 6 m also available Other configurations available on request: Over 3,000 linear meters of pallet racking from various manufacturers constantly in stock. Transport and assembly available on request. (Subject to technical changes, errors and prior sale! See our Terms and Conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for and offering numerous items from various categories • Broom-clean company clearances • Business liquidations • Quick – flexible – efficient! We also clear and/or dispose for insolvency administrators. Send us a short message with some keywords and we will contact you promptly. To get to our page, please click on our logo!

Kondisi: baik (bekas), Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering you a used collision protection guardrail for purchase here. Suitable for a double rack row: 2x 1,100 mm rack depth + 200 mm rack connector Scope of delivery: 01x Collision protection guardrail, used Material color: yellow Total length: approx. 2,455 mm Total length without base plate: approx. 2,400 mm Suitable for a double rack row Total depth: approx. 150 mm Total height: approx. 315 mm Profile dimension: U 100 x 50 x 10 mm Material thickness: approx. 8 mm Hole diameter: approx. 13 mm Required floor anchors: 8 pieces Our services at a glance: (Prices on request) Hsdpfxedz Uxqe Amuen Assembly, installation Please observe our general assembly conditions Rack inspection Rack inspection in accordance with DIN EN 15635, carried out according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own vehicle fleet (without unloading)

Kondisi: seperti baru (mesin pameran), We offer here a second-choice (II. Wahl) column protector from the manufacturer SSI Schäfer for purchase. Scope of delivery includes: 01x Column protector, second-choice Material color: yellow Design: V-shape Total height: approx. 750 mm Hsdpfxjhr U Tro Amusn Overall width: approx. 124 mm Internal width: approx. 116 mm Total depth: approx. 65 mm Leg dimension: approx. 65 x 65 mm Material thickness: approx. 4 mm Grid/hole spacing: approx. 300 mm Number of holes: 6 pcs. (3 pcs./side) Hole diameter: approx. 9 mm 06x Hexagon bolt: M8 x 35 mm 06x Serrated nut: M8 06x Washer: M8 General information about the item: This item is only available for collection. Additional transport or shipping of this item is subject to extra costs, which can be specified separately depending on the delivery location and scope of delivery. Please contact us for individual quotes.

Kondisi: baru, We are offering 10 new retail shelving units for sale. Features: - Shelf heights are individually adjustable - Shelves can be angled (see pictures) - Castors for flexible warehousing - All castors fitted with locking brakes, allowing storage on inclined surfaces - Bottom frame can be folded up to provide space for a Euro pallet - Surface material: high-quality chrome finish - Suitable for various industries - Easy and straightforward assembly Technical Data and Further Information: Overall height: approx. 1,587 mm Overall depth: approx. 855 mm Overall width: approx. 1,310 mm Scope of delivery: 10x retail shelving units, new Each consisting of: Hedpfx Amjhu Apususn 01x base frame, new Width: approx. 1,310 mm Depth: approx. 855 mm 01x rear panel, new incl. stabilising hooks 04x lockable castors, new incl. Allen key for assembly 02x shelves, new Depth: approx. 375 mm 02x shelves, new Depth: approx. 425 mm 01x instruction manual Please refer to the attached drawing for further specifications. Notes: The shelving unit is delivered disassembled and requires on-site assembly. These are brand new items; however, packaging may show minor damage or dust residues, etc.

Kondisi: baru, We offer you 2 new sales shelving units for purchase. Features: - Shelf height adjustable to individual requirements - Shelves can be installed at an angle (see photos) - Casters for flexible warehousing - All casters equipped with parking brakes, allowing safe storage even on sloped surfaces - Base frame can be folded up, providing space for a Euro pallet - Material surface: high-quality chrome-plated - Suitable for a wide range of industries - Quick and easy assembly Technical data and further information: Overall height: approx. 1,587 mm Overall depth: approx. 855 mm Overall width: approx. 1,310 mm Scope of delivery: 02x sales shelving units, new consisting of: 01x base frame, new Width: approx. 1,310 mm Depth: approx. 855 mm 01x rear panel, new incl. stabilizing hooks 04x casters with brakes, new incl. Allen key for installation 02x shelves, new Depth: approx. 375 mm 02x shelves, new Depth: approx. 425 mm Hedshu Apmepfx Amusn 01x operating manual For additional details, please refer to the attached drawing. Notes: The shelving unit is delivered disassembled and must be assembled on site. This is new merchandise; however, the packaging may have minor damages or dirt residues, etc.

Tahun pembuatan: 2018, Kondisi: baru, Here are your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering you a new column protector from the manufacturer Mecalux for purchase here. The column protector is suitable for frame profile widths up to a maximum of 120 mm. Scope of delivery includes: Hedsd Rxyrjpfx Amujn 01x Column protector, new Material colour: orange For upright profile width: approx. 120 mm Overall height: approx. 600 mm Overall width: approx. 132 mm Internal width: approx. 126 mm Total depth: approx. 70 mm Deflector: approx. 55 mm Material thickness: approx. 3 mm Hole dimensions: approx. 9 x 14 mm Hole spacing (centre-to-centre): approx. 400 mm Weight per unit: approx. 4.298 kg 04x Hexagon bolt: M8 x 25 mm 04x Locking nut: M8 04x Washer: M8 Our services at a glance: (prices on request) Assembly and installation Our general assembly terms and conditions apply. Racking inspection Inspection according to DIN EN 15635, carried out as per requirements of BGR 234 visual checks for all racking systems. Delivery with our own fleet (unloading not included)

Kondisi: baik (bekas), Included in the scope of delivery: 01x Upright protector, used Material color: yellow Total height: approx. 970 mm Total width: approx. 140 mm Internal width (with foam): approx. 93 mm Internal width (without foam): approx. 134 mm Total depth: approx. 60 mm Hsdeikvktepfx Amusn Material thickness: approx. 3.00 mm Hole diameter: approx. 11 mm Hole spacing (H x W): approx. 700 x 50 mm Unit weight: approx. 5.87 kg - Fixing material not included

Kondisi: baik (bekas), The delivery scope includes: 01x U-shaped impact protection, used Material color: yellow Total height: approx. 400 mm Outer profile dimensions: U: approx. 100 x 50 mm Outer profile dimensions: U: approx. 80 x 40 mm Material thickness: approx. 6.00 mm Base plate dimensions: approx. 200 x 100 mm Borehole diameter: approx. 12 mm Number of boreholes: 04 pcs. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Should you require transportation or shipment of this item, additional costs will apply, which can be quoted separately depending on the delivery location and delivery scope. Hodsn R Edmepfx Amusn