Baler

BTS-MF75 Ballenpresse Waste Baler

Tahun pembuatan: 1994, Kondisi: siap digunakan (bekas), Engine power: 15.5 kW / 19.5 kW, pressing force: 320 kN, specific pressure: 425 kN/m², machine dimensions (L/W/H): approx. 5700 mm / 1900 mm / 1800 mm, weight: approx. 6000 kg. The machine exhibits a malfunction due to moisture and should be inspected. Lsdeip D Rpopfx Agisrw

Kondisi: siap digunakan (bekas), Tekanan tekan: 60 ton Mesin press bal Dixi 60s, tahun 2006-2012, harga: 4.000 EUR Tahun 2018-2020, harga: 5.500 EUR Lsdpfx Agjra Nqheisrw Ukuran bal: 120 x 80 x 110 cm Ukuran mesin press: 1900 x 1400 x 2200 mm (tinggi) Berat mesin press: sekitar 2.430 kg Berat bal hingga 500 kg Pemanas oli Motor 7,5 kW Mesin press bal baru, unit display: 11.000 EUR

Kondisi: siap digunakan (bekas), HSM 155 VL Baler Bale dimensions Length x Width x Height: 1100 x 700 x 700 - 950 mm Bale weight: 200 – 250 kg (Cardboard) Technical data: Length x Width x Height: 1470 x 940 x 2259 / 2439 mm Machine weight: 950 kg Pressing force: 16 tons Power supply: 400 V (three-phase) Motor power: 4 kW Bale ejector HSM 155.1 VL Baler Pressing force: 18 tons Price for HSM 155.1 VL baler – 2,600 EUR HSM 155.2 VL Baler Pressing force: 16 tons Lredpfxjra Nrme Agiew Price for HSM 155.2 VL baler – 2,800 EUR

Kondisi: bekas, Tahun pembuatan: 1997, Lebar jalur 1200 mm Tinggi jalur 1200 mm Kedalaman ruang 1200 mm Tekanan operasi 6,0 bar Tegangan operasi 380 V Berat mesin sekitar 1,4 t Lrsdpfx Aevlzzusgijw Kebutuhan ruang sekitar 1,40 x 1,70 x 2,70 m - No. pabrik: 340997-466 - Mesin sandblasting tekanan (bukan kabin sandblasting injektor!) - Meja putar / piringan putar, dapat ditarik keluar - Sakelar kaki - Sistem ekstraksi - Tangga

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 21.676 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 750 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 25.000 kg, tinggi transportasi: 3.000 mm, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), berat kosong: 25.000 kg, laju aliran volumetrik: 930 m³/jam, tekanan kerja: 250 batang, Hello, We hereby offer you, without obligation, a used baler from the manufacturer Presona AB, type LP 80 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours (as of November 2024) Pressing force (main press): 78 t Specific pressing force: 95 N/cm² Pre-press lid force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 l Press dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (press): approx. 25 t Note: Lredpfovgrh Uex Agisw The machine was used in a recycling facility for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Tahun pembuatan: 2003, jam operasional: 43.000 h, Kondisi: perlu perbaikan (bekas), nomor mesin/kendaraan: HBC 140 2x75kW 2003 (W230-005), nl-naar-en Lrodpfskcgynex Agiow

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The BTS-MF200MK is the ideal multi-chamber baler for compacting your loose cardboard and film waste into bales of up to 200 kg. Different materials can be collected in two or more adjacent pressing chambers; once a chamber is full, the movable press head is rolled over and the material is compacted. By compressing these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and return the material to the recycling loop in a proper manner. Pressing force: 16 tonnes Bale weight: up to 200 kg (depending on material) Bale size: 1000 H (var.) x 1100 W x 800 D mm Machine dimensions: 2506 H x 3260 W x 1269 D mm Machine weight: 1400 kg Transport height: 2506 mm Feed opening: 1100 W x 800 H mm Pressing time: 34 seconds Motor: 2.2 kW / 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever operation Bale ejector for easy removal Retainer claws to reduce material spring-back Short handling times as one chamber always remains available for loading Strapping band holder A quality product 'Made in Europe' Suitable for compacting: Cardboard Film Big Bags Clothing Light packaging materials Ljdpjvugz Eefx Agijrw Additional options: Annual maintenance with UVV inspection Machine color per RAL PLC control with automatic press cycle, bale-ready indicator and E-stop with key Additional press chambers (up to 6 total) Strapping bands Power supply 380 - 400 V (3 phases) Double-chamber baler, baler, paper baler, waste paper baler, cardboard baler, cardboard box baler, film baler, paper bale press, waste baler, waste compactor, recycling press, refuse compactor, waste press, residual waste press

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, arus masuk: 238 A, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. Lredpfx Agevf E Aveiow - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: bekas, Tahun pembuatan: 2011, nomor mesin/kendaraan: 340000674, The HSM baling press V-Press 403 is a compact solution for the efficient compaction of waste and recyclable materials. This used press delivers outstanding performance and is ideal for businesses looking to optimize their waste management and save space. With its robust construction and user-friendly operation, it is perfectly suited for use across various sectors. Technical specifications: Machine No.: 6113.114 Serial number: 340000674 Pressing force: 33 kN Power supply: 400 V / 50 Hz Dimensions: approx. 1,200 x 800 x 1,500 mm (L x W x H) Motor output: 1.1 kW Rated current: 2.6 A Lrjdpfxounzn Ns Agijw Year of manufacture: 2011 Weight: approx. 300 kg

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, daya: 65 kW (88,38 hp), berat keseluruhan: 15.550 kg, Tahun pembuatan: 2002, jam operasional: 7.839 h, nomor mesin/kendaraan: CGG0213869, CASE 588-P wheeled hydraulic excavator is in good condition and ready for use. Ideal for handling, recycling, or sorting operations, it is equipped with a robust hydraulic grapple. With only 7,839 operating hours, it offers many more hours of reliable service. Lrodpev Ehkcefx Agijw