Beli Mütek Mfp bekas (83)

Kondisi: baru, Tahun pembuatan: 2026, Production time for the machine is approx. 3.5 months Very robust machine with high pressing force - also suitable for producing a marketable briquette quality* depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional features: Surcharge for cooling unit: + €3,995 net (can also be retrofitted later) * Cools the pressing jaw (important for operations over 3.5 hours) and the hydraulic oil * Cooling unit recommended for continuous operation exceeding 3.5 hours at a time. Large pre-compactor chamber: + €1,975 net Recommended for light input materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (material-dependent): up to 110 kg/h* Last test: approx. 87 kg/h *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil capacity: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 cbm Pump: 37 liters Hydraulic pre-compactor Option for cooled pressing jaw: yes, with special accessory cooled pressing jaw Pressing jaw cooling via water tank (to be supplied by customer) Hydraulic oil cooling option: yes Kdedpjffh Atefx Acisn Fill level monitoring option: yes Continuous briquette strand option: yes (material-dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and no more than 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur.

Kondisi: baru, Tahun pembuatan: 2026, Mesin ideal untuk penghancuran kayu lunak. Kjdowzarcopfx Aciodn Motor: 11/15 kW; 400 V - 50 Hz - 3 ph, Diameter rotor: 260 mm, Pendorong digerakkan secara hidrolik Lubang saringan sesuai pilihan (12 - 40 mm) Diameter saluran hisap Ø 160 mm Berat sekitar 1.100 kg Dimensi (p x l x t) sekitar 1805 x 1118 x 1650 mm Warna: biru / abu-abu Persyaratan bahan baku: - Kadar air (atro) harus di bawah 30 % - Logam dan kontaminan mineral seperti pasir, batu, dsb. meningkatkan keausan. Kami dengan senang hati menawarkan pengujian gratis menggunakan material Anda. Anda dapat datang ke lokasi kami di Neckartailfingen, atau kirimkan material Anda melalui ekspedisi dan kami akan mendokumentasikan pengujiannya dengan foto dan video.

Tahun pembuatan: 2024, Kondisi: baru, Overview – Various Configuration Options *Not all items may be required: Optional: - Bale Breaker MHB starting from €24,990 net Kdedpfx Aeff Sbijcisn - Straw Mill MHZ starting from €7,980 net - Special Hopper €970 net - Cyclone from €3,750 net - Sheet Metal Silo demonstration unit with discharge (only sketched in the picture) *Optional, if feeding by wheel loader is desired Unit price net from €14,750 – demo unit - Dedusting Screw Conveyor – approx. 4 m length Four screens are mounted underneath for suction extraction. Net unit price from: €9,750 - Exhaust Components / Hoses flat rate €945 net - Control System for Complete Plant Net unit price: €2,750 - Demonstration Unit Extraction Device MMJET 160, with cleaning system Connection: 160 mm Fan 2.2 kW Airflow: 1850 m³/400 V Automatic compressed air cleaning Net unit price from: €6,950 - Baling Press B 400 Bale size approx. 400 x 400 x 800 mm (height adjustable) Up to 30 bales per hour at ±20 kg From €59,995 net * A reference installation (baling press) is located at postal code: 64579 Gernsheim Technical Data: Bale size (WxDxH): 400 x 400 x 800 mm (height adjustable on request) Bale weight ±20 kg (material-dependent) Performance: approx. 30 bales per hour Feed hopper capacity: approx. 0.7 m³ Min./max. level sensors in hopper Hydraulic pre-compactor Hydraulic pressing ram Hydraulic unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in pressing channel for easy bale ejection Dimensions (L x W x H): 3105 x 2830 x 2455 mm Weight: approx. 1,500 kg mütek baling presses / packaging machines are designed for producing bales from a wide variety of materials such as shredded miscanthus or elephant grass, wood chips, sawdust, and chopped straw. These machines feature robust construction, ensuring consistent quality during continuous operation. The baling press compacts material filled into the storage hopper by hydraulic pressure without the use of binding agents and packs the material into plastic bags. The material volume can be significantly reduced using the baling press. The volume reduction factor depends on the material. The maximum material moisture content must not exceed 18% ATRO. The hopper of the mütek baling press can be loaded automatically or manually and has a capacity of approx. 0.7 m³. Hoppers with higher volumes or with integrated extraction and filter systems as complete disposal units are also available. In addition to automatic feeding by deduster, mütek offers feeding by screw conveyors. For both options, automatic dedusting is possible. mütek baling presses are equipped with a control cabinet. In standard version, bale dimensions are (WxDxH): 400 x 400 x 800 mm. Height can be adjusted to customer requirements on request. Baling offers the following advantages: - Simple and safe storage - No loose dust - Minimization of storage space - Low transport volume *Raw Material Requirements: - Dry (max. 30% ATRO) - Maximum length 35 mm

Kondisi: baru, Tahun pembuatan: 2026, Single-Shaft Shredder MRZ 530 Includes: + Profile rotor for increased throughput Options: Double knife row + €895 net Veneer and paper stripper + €970 net * recommended for extremely thin materials with a thickness less than 3 mm Our mütek single-shaft shredder MRZ 530 shreds a wide range of materials such as all types of residual wood, softwood, chipboard and fibreboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine is characterized by a robust construction, ensuring consistent quality in continuous operation. We are happy to offer a free test using your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via a shipping company, and we will document the test with photos and videos. Machine Data: Motor: 15 kW; 400 V - 50 Hz - 3 ph, Knives: multiple cutting edges (reversible), Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm) 510 x 810 mm, Hopper volume approx. 0.4 m³, Throughput rate 1 - 5 hopper fillings / h, Hydraulically operated pusher, Screen perforation of choice (10 - 40mm), Extraction port Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of raw material: must be below 30% a.d. Standard features included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC • Automatic star/delta start • Automatic shutdown when rotor runs idle • Removable extraction chute • Speed 70 - 100 rpm for increased throughput • Intermittent control to avoid idle times • Performance-enhancing step control of hydraulic pusher Ksdpfx Acod Db N Isiodn • Robust guides for the hydraulic pusher Additional shredder options: - Raise the shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2,000 mm +/- 100 mm - Overband magnet + €5,980 net - Controls for conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) Requirements for input/raw material: - The moisture content (a.d.) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear

Kondisi: baru, Tahun pembuatan: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Customs tariff code: 84659600 Feed opening: 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Knives: multiple reversible edges Hydraulically operated pusher Screen perforation as required (10 - 40 mm) Extraction nozzle Ø 200 mm Weight: approx. 1,600 kg Dimensions (LxWxH): approx. 2290 x 1420 x 1750 mm Turbo clutch Standard features included: - automatic star-delta starting - high-speed hydraulics - automatic stop if rotor idles - Speed: 70-90 rpm for high throughput - Pulse control to avoid idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, chipboard, MDF panels and other materials (subject to trial and approval by the manufacturer) . Kdsdpfed Dgw Ujx Acion Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,140 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm ±100 mm - Overbelt magnet + €5,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (start and stop each synchronized with the shredder) . Raw material requirements: - Moisture content (dry matter) must be below 30% - Installation temperature: temperature-controlled room at at least +5°C - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear

Kondisi: baru, Tahun pembuatan: 2025, The ideal machine for shredding hardwood and softwood Another machine available immediately (ex works Neckartailfingen) - Motor: 18.5 kW; 400 V - 50 Hz - 3 phase - Knives: 14+2 pieces, 40x40 mm, reversible multiple times - Rotor diameter: 260 mm - Control: Omron PLC - Cutting chamber opening: 600 x 800 mm - Hopper volume approx. 0.6 m³ - Hydraulically actuated ram - Screen perforation selectable (12 – 40 mm) - Extraction nozzle Ø 160 mm - Weight approx. 1,300 kg - Dimensions (LxWxH) approx. 1,737 x 1,167 x 1,650 mm The following options are available at an additional cost: - Additional knife row + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (prevents the ram from jamming; recommended for materials less than 3 mm thick) - Shredder height increase by 30 cm (prepared for conveyor belt) + €1,980 net Ksdpfx Aed E R D Seciodn - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Controls for conveyor belt and overband magnet + €2,750 net (synchronized start and stop with the shredder) - Special bearing + €1,540 (rarely needed; enclosed, even more durable rotor bearing. Worth considering for screens < 15 mm or for a high proportion of fines. Not necessary if bearings are greased every approx. 2 weeks in operation) Raw material requirements: - Moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear We would be happy to offer you a free trial with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier and we will document the test with photos and videos.

Kondisi: baru, Tahun pembuatan: 2024, en-1 Kedpfjd Hkqhsx Acisdn

Tahun pembuatan: 2025, Kondisi: baru, Granulator MVZ 7.5 kW Demonstration unit available at a special price Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic parts or for post-shredding of wood chips. Further details can be provided after testing with your specific material. Our granulators are used for processing a wide range of materials, such as plastics or wood. Shredders and granulators are suitable for various size-reduction applications. For example, in injection molding, rejects and sprues are produced that need to be reprocessed. In blow molding, in addition to rejects, there are parisons or start-up waste. The system can process blow molding materials such as PET bottles, PE/PP bottles, canisters, buckets, pipes, and more. Material is fed from above via a hopper into the cutting chamber of the granulator. Inside, a rotor equipped with cutting knives shreds the material between the rotating knives and the stationary counter-knives mounted in the chamber until it passes as regrind through the screen located below the rotor. *Option: The ground material is usually transported pneumatically into big bags, silos, or other containers. The price applies only to the shredding plant as shown in image 1 - fan, cyclone, and filter are optional. --- Technical Data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger systems available on request (4 to 75 kW) Throughput up to 120 kg/h when shredding plastics *highly dependent on screen size and material Application example: Shredding PE 1000 plastic Input material: approx. 40 mm chip length Post-shredding to approx. 6 mm Throughput up to 50 kg/h with 6 mm screen (Throughput up to 80 kg/h with 8 mm screen) ___ For G30 wood chip post-shredding, much higher throughputs can be achieved: Up to a maximum of 400 kg/h with a 10 mm screen, *metered feed, e.g., via conveyor or auger. Further details after testing approx. 30 kg sample. Rotor diameter: 180 mm 6 rotor knives, each 225 mm 4 stator knives, each 225 mm Dimensions: 930x730x1420 mm Weight: 450 kg Suction connection: 100 mm Screens: 5, 6, 8, 10, 12, and 15 mm - additional screen sizes available Kodpfx Aed N Dn Djcisdn Price per screen: €390 Price for replacement knife set: €679 Suitable for, for example: - All types of plastic waste Various materials: HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs, etc. Parts from injection molding, blow molding, sprue waste, small bottles, cables, small pipes, profiles, etc. --- Larger systems also available as an option: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *depending on screen and material Infeed opening: 620x400 mm *Optional with matching extraction/transport system Granulator MVZ / 30 kW Throughput up to 400 kg/h *depending on screen and material Infeed opening: 620x500 mm *Optional with matching extraction/transport system --- For system design, the following information is important: - Length x width x height of the input material? - Screen size: what final particle size (mm) is required? - Required throughput per hour (kg)? - Wall thickness (mm)? - Material description Photos can also be helpful.

Kondisi: baru, Tahun pembuatan: 2026, Extremely powerful industrial magnet for iron separation Kdodpotqfhxjfx Acion Special price €990 net (Shipping €14.90 net) *You can find the construction lengths in picture 2 The effective surface features a stainless steel end plate (material 1.4301). For installation, there are threaded holes on the rear side. *Handle available upon request The block magnet systems can be used at a maximum operating temperature of up to +100°C. The magnet surface should be cleaned regularly from the collected iron parts. Attraction distances for all types, e.g.: For an M5 steel nut approx. 60 mm For an M5 x 30 screw approx. 100 mm Installation example 1: Mounted above a conveyor belt, "iron parts jump onto the magnet's gripping surface". Installation example 2: Mounted in a pipeline system with direct contact to the material flow. For high separation reliability, the installation of several block magnets in a cascade arrangement is possible. Installation and safety instructions: When handling, already during unpacking and later during installation, ensure that no loose iron parts, such as tools or screws, are lying nearby. The magnetic force is so strong that painful injuries can occur if fingers are caught between iron parts and the magnet’s active surface. No steel parts should be located within a minimum distance of 400 mm beneath the active surface.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, translate-001 Kjdjdv Eu Hopfx Aciodn

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, The ideal machine for cable shredding Featuring optimized cutting geometry Approximately 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 14 pieces, 40x40mm, reversible multiple times Rotor diameter: 260 mm Control system: Omron PLC Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (15 - 40 mm) Suction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double row of blades + €1,990 net (28 instead of 14) - Surcharge for 4-sided segmented floor + €2,170 net (Prevents jamming of the pusher. Recommended when shredding plastics, paper, or veneer with a thickness less than 3 mm.) - Shredder height increase by 30 cm (preparation for conveyor belt) + €1,980 net - Angle conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Control system for conveyor and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Ref. Bea9ia3l27 Kdedpfxogmfa Ao Acion Feed material requirements: - Mineral impurities such as sand, stones, etc., will increase wear. We would be pleased to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us by freight, and we will document the test with photos and videos.

Kondisi: baik (bekas), Overhauled used machine *Optional features available at extra cost, see below with full 1-year warranty Ready for delivery approx. 16 weeks after order Technical specifications: Throughput rate up to max. 1,200 kg/h, depending on material (e.g. sawdust with a bulk density of 180 kg/m³) Briquette diameter: 75 mm Includes 2 m press channel Kdjdpfx Aj E Dquocion Main motor power: 45 kW Feed auger geared motor: 2 x 2.2 kW Compactor screw: 2 x 5.5 kW Distributor screw: 2.2 kW Hydraulic pump motor: 0.37 kW Total connected load: 65 kW Control panel with plain text display for operating states and utilization display for main drive and feed screws Siemens S7/300 PLC control with operating hours counter in the control cabinet Machine bears CE marking Automatic start/stop function Dimensions: 3100 x 860 x 1800 mm (LxWxH) Weight: 4,500 kg Options: Silo for MAP series (suitable only for one MAP 1200 press) - Storage silo above the machine - Capacity approx. 6 m³, robust steel construction with agitator discharge and level sensor. €19,700 net plus VAT -Temperature control unit for press tools To maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressure switch Fully wired and ready for connection — essential for operation including corresponding control unit €7,850 net -Guillotine for cutting briquettes to length Compressed air supply required on site €6,940 net plus VAT -Transport line / cooling section (nominal: 4 x 2 m) Per 2 meters: €990 net Assembly / commissioning (nominal per press: approx. 2–3 days on site) Charged according to actual time; invoiced separately. The following rates apply: Service technician/mechatronics per assembly and travel hour: €129.00 Surcharge for overtime: +25% Saturday and night hours: +50% surcharge each Sunday and holiday hours: +100% surcharge each Daily allowance per technician per day: country-dependent Per car/van and driven kilometer: €0.98/km Travel and accommodation billed at cost or by flat rate to the customer’s account. Testing with customer’s own material: (by agreement, up to max. 750 kg) — flat rate €1,970 net ---- Requirements for raw material: - Moisture content (atro) must be at least 6% and max. 18% - Maximum chip length: 20 mm - Installation temperature: heated room, minimum +5°C - The feed must be free from metal and mineral contaminants. Damage to the press tools and/or increased wear may result.

Kondisi: bekas, mgz1330-en Kedpfx Aex Tfdhjcisdn

Kondisi: bekas, 1 Kdsdpswrihnsfx Acisn

Kondisi: bekas, Conveyor belt, belt conveyor, strap conveyor, belt conveyor MFP Fördertechnik Machine no.: 20083 Year of manufacture: 2021 Kdsdpfjwqg Enox Acion Usable length: 2800 mm Belt width: 360 mm Usable width: 300 mm Belt length: approx. 5800 mm Frame profile height: 70 mm Deflection roller diameter: 20 mm Belt speed: 10 m/min to 48 m/min Conveyor belt height: approx. 1150 mm Motor power: 140 Watts Power supply: 230 Volt, 50 Hz - Infinitely variable belt speed via potentiometer on ROFRE frequency inverter, type 897 - Reversible (forward/reverse) - Belt drive via INTERROLL drum motor - Robust steel sheet construction with closed steel sheet cover plate under the conveyor belt - 1 height-adjustable support with hand crank, conveyor belt height approx. 1000 to 1200 mm - Support mounted on steel plate, length 500 mm x width 500 mm x thickness 30 mm - 1 fixed support foot without height adjustment as a transport support - Fully mobile on fixed castors Overall dimensions (L x W x H): 2880 x 500 x 1150 mm Weight: 200 kg Good condition

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, en Kedpfxsx Svrtj Acisdn

Kondisi: bekas, en Kjdpoxf Uqlsfx Acisdn

Kondisi: siap digunakan (bekas), Lang CNC L-Step 22/2 MFP stepper motor controller SN: V / 200 - 240 V / 50 - 60 Hz, used, good condition, fully functional, scope of delivery as per photos Kedpoy Sdvaofx Aciedn

Kondisi: siap digunakan (bekas), siap pakai, MFP warna (perangkat multifungsi) Ksdpfx Aszdq Ikocisdn

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Dijual dari Denmark - 50 unit Color LaserJet Managed Flow MFP E67560 A4 Semua dijual satu paket Ksdpfxjzc R Ivo Aciodn Semua sudah diuji cetak Semua dengan toner bekas Harga net untuk 50 unit hanya 4.980,- euro Netto

Kondisi: bekas, Mesin Gerinda Datar MAEGERLE MFP-125-35 Kdodpfx Acoy Tzcmjijn

Kondisi: baru, Tahun pembuatan: 2023, Dear Business Customers, We are pleased to offer you an almost new machine: Usage counter: 24,000 pages Canon imageRUNNER ADVANCE DX C3830i MFP Pallet shipping available from our Weyhe warehouse (price upon request) or self-collection. The Canon imageRUNNER ADVANCE DX C3830i MFP series delivers optimal performance and an unparalleled user experience thanks to innovative technologies. Kjdpfxottzx De Aciedn The future of printing is digital. The Canon imageRUNNER ADVANCE DX systems represent a new generation of intelligent, multifunctional devices designed to support and accelerate every aspect of your digital transformation. Featuring Canon’s ADVANCE DNA—with state-of-the-art hardware and software seamlessly working together—they excel at digitizing documents, automating workflows, and optimizing processes. Canon continuously advances these technologies to ensure you always feel secure and well-supported when using Canon systems. The imageRUNNER ADVANCE DX C3800 series from Canon sets new standards in security and serviceability with intelligent document workflows and brilliant image quality. Ideal for small to medium-sized offices and large enterprises seeking a versatile and efficient multifunction system, these quiet and sustainable machines integrate seamlessly into hybrid work environments. uniFLOW Online Express comes pre-installed, enabling centralized device management and secure cloud collaboration. Product features: - Print, copy, scan, store, send, with optional fax functionality - 30 A4 pages per minute; fast A3 color printing at 15 pages per minute - Print resolution: 1,200 x 600 dpi - Scanning speed: up to 270 images per minute (A4, 300 dpi) - Flexible media handling up to A3 - Maximum paper capacity: 2,300 sheets - Includes Duplex Automatic Document Feeder (DADF) - Supported file formats: PDF, EPS, TIFF, JPEG, and XPS - Printer languages: UFR II, PCL6, Adobe PostScript®3TM - Finishing options: sorting, collating, offset stacking, stapling, saddle-stitch, hole-punching, staple-free stapling, on-demand stapling - Quick start-up time: ready for operation within 4 seconds - uniFLOW Online Express software ensures continued productivity in hybrid environments - Efficient document digitization via automated workflows, integrating with applications such as OneDrive, SharePoint, Concur, Dropbox (requires uniFLOW Online*) - Secure, convenient operation in hybrid environments with system features such as personalized user scheduling, optional antimicrobial protection, and mobile print/scan via the Canon PRINT Business app - Security features: McAfee Embedded Control, TPM 2.0, and SIEM support protect documents, networks, and systems - Easy maintenance and serviceability ensure system reliability and maximize uptime - Quieter printing and scanning reduce environmental impact and workplace disturbance

Kondisi: siap digunakan (bekas), mesin fotokopi kantor Kdsdpfx Acexac N Ejien

Kondisi: sangat baik (bekas),

Kondisi: sangat baik (bekas),