Beli Mütek Mfp bekas (79)

Kondisi: baru, Tahun pembuatan: 2025, The ideal machine for shredding hardwood and softwood Another machine available immediately (ex works Neckartailfingen) - Motor: 18.5 kW; 400 V - 50 Hz - 3 phase - Knives: 14+2 pieces, 40x40 mm, reversible multiple times - Rotor diameter: 260 mm - Control: Omron PLC Ledpod E R D Sofx Agyjah - Cutting chamber opening: 600 x 800 mm - Hopper volume approx. 0.6 m³ - Hydraulically actuated ram - Screen perforation selectable (12 – 40 mm) - Extraction nozzle Ø 160 mm - Weight approx. 1,300 kg - Dimensions (LxWxH) approx. 1,737 x 1,167 x 1,650 mm The following options are available at an additional cost: - Additional knife row + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (prevents the ram from jamming; recommended for materials less than 3 mm thick) - Shredder height increase by 30 cm (prepared for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Controls for conveyor belt and overband magnet + €2,750 net (synchronized start and stop with the shredder) - Special bearing + €1,540 (rarely needed; enclosed, even more durable rotor bearing. Worth considering for screens < 15 mm or for a high proportion of fines. Not necessary if bearings are greased every approx. 2 weeks in operation) Raw material requirements: - Moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear We would be happy to offer you a free trial with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier and we will document the test with photos and videos.

Kondisi: baru, Tahun pembuatan: 2026, Mesin Penghancur Satu Poros MRZ 530 Termasuk: Rotor Eco Ring (untuk mengurangi kebutuhan energi) Pilihan: Pengikis veneer dan kertas + €970 (harga bersih) * direkomendasikan untuk material yang sangat tipis dengan ketebalan kurang dari 3 mm Mesin penghancur satu poros mütek MRZ 530 kami menghancurkan berbagai jenis material seperti sisa kayu dari semua jenis, kayu lunak, papan serpihan dan serat keras, palet, kayu konstruksi, kayu bekas, karpet, kabel, kertas, karton, dan plastik. Mesin ini memiliki konstruksi yang kokoh, yang menjamin kualitas yang konsisten dalam pengoperasian berkelanjutan. Dengan senang hati kami menyediakan pengujian gratis dengan material Anda. Kami mengundang Anda untuk mengunjungi kami di Neckartailfingen untuk keperluan ini. Anda juga dapat mengirimkan material Anda kepada kami melalui perusahaan ekspedisi, dan kami akan mendokumentasikan pengujian dengan gambar dan video. Data mesin: Motor: 11 kW; 400 V - 50 Hz - 3 fasa, Pisau: dapat diputar beberapa kali, Diameter rotor: 260 mm, Pengendali: PLC Siemens S7-1200, Corong (mm): 510 x 810 mm, Volume corong: sekitar 0,4 m³, Penggeser yang dioperasikan secara hidraulik, Lubang saringan (10 - 40 mm), dapat dipilih, Sambungan penghisap Ø 160 mm, Berat: sekitar 1.000 kg, Dimensi: sekitar 1550 x 1100 x 1640 mm, Kadar kelembapan bahan baku: harus di bawah 30% (kadar air kering). Termasuk sebagai standar: • Sistem hidraulik cepat • Rotor profil • Kotak kontrol dengan pengendali PLC Siemens • Sistem start otomatis (bintang/segitiga) • Sistem mati otomatis saat rotor tidak beroperasi • Saluran penghisap yang dapat dilepas • Kecepatan 70 - 100 RPM untuk kinerja throughput yang lebih tinggi Lsded Db N Iepfx Agyeah • Pengendali siklik untuk menghindari waktu henti • Pengendali langkah yang meningkatkan kinerja penggeser hidraulik • Panduan yang stabil untuk penggeser hidraulik Pilihan tambahan untuk mesin penghancur: - Ketinggian mesin penghancur ditingkatkan 30 cm (persiapan untuk ban berjalan) + €1.980 (harga bersih) - Ban berjalan berengsel + €8.770 (harga bersih) Bagian horizontal: 1200 mm Bagian miring: 2500 mm Sudut: dapat diatur antara 0-60 derajat Ketinggian keluaran: sekitar 2000 mm + - 100 mm - Magnet pita + €5.980 (harga bersih) - Pengendali ban berjalan dan magnet pita + €2.750 (harga bersih) (Start dan stop disinkronkan dengan mesin penghancur) Persyaratan untuk bahan baku: - Kadar kelembapan (kadar air kering) harus di bawah 30% - Logam dan kontaminan mineral seperti pasir, batu, dll. akan menyebabkan peningkatan keausan.

Kondisi: baik (bekas), Clean air extraction Used machine, good condition Pictures to follow Laedpfxorb D Ne Agysh Mobile Jet 160, Connection: 160 mm, Fan: 2.2 kW Airflow rate: 1,850 m³/h, 400 V

Kondisi: baru, Tahun pembuatan: 2026, Mesin yang sangat kuat dengan kekuatan pengepresan tinggi - juga cocok untuk menghasilkan kualitas briket yang dapat dijual, *tergantung pada jenis material. Silinder pengepres yang berukuran besar dan briket berdiameter 80 mm menjadikannya mungkin. Seri mesin pengepres briket kami yang paling laris + Teknologi yang telah teruji dan sederhana, untuk meminimalkan kemungkinan terjadinya kesalahan + 25 tahun pengalaman, pengembangan berkelanjutan, dan keahlian + Ribuan mesin telah digunakan oleh pelanggan yang puas + Rasio harga dan kinerja terbaik Biaya tambahan untuk perangkat pendingin + €4.995, (dapat dipasang kemudian) * mendinginkan rahang pengepres dan oli hidrolik (disarankan, terutama jika mesin digunakan secara teratur selama lebih dari sekitar 3,5 jam tanpa henti) Diameter briket: 80 mm Bushing depan: 125 mm Langkah briket maks.: 100 mm Langkah briket optimal: 80 mm Kapasitas (tergantung pada jenis material): hingga maksimal 200 kg/jam* *tergantung pada berat jenis *berdasarkan berat jenis 200 kg per meter kubik Daya motor: 9,2 kW 400 Volt / 50 Hz / 3 Fase Panjang: 2095 mm Lebar: 1600 mm Tinggi: 1700 mm Lsdjxfwdopfx Agyeah Berat: 1250 kg Volume oli: 220 liter Diameter silo: 1200 mm Kapasitas silo: sekitar 1 meter kubik Pompa: 75 liter Pra-kompresor hidrolik Opsi pendinginan rahang pengepres: ya, dengan aksesori khusus Rahang pengepres yang dapat didinginkan Opsi pendinginan oli hidrolik: ya Pendinginan rahang pengepres dan oli hidrolik dengan perangkat pendingin (aksesori khusus) Opsi pemantauan level: ya Opsi briket berbentuk batang: ya (tergantung pada jenis material) Opsi corong pengisian yang diperbesar: ya, dengan aksesori khusus Corong pengisian yang diperbesar Memenuhi standar CE . Persyaratan untuk bahan baku: - Kadar air harus antara 6% hingga maksimal 15% - Panjang serpihan maksimal 20 mm - Suhu pemasangan: ruang dengan suhu terkendali minimal +5°C - Bahan baku yang dimasukkan harus bebas dari logam dan kontaminan mineral seperti pasir, batu, dll. Kerusakan pada perkakas pengepres dan/atau peningkatan keausan dapat menjadi akibatnya.

Kondisi: seperti baru (mesin pameran), Kapasitas produksi hingga maksimal 50 kilogram per jam. Diameter briket: 50 mm. Lajdpfxezu Skno Agyeh Motor utama: 4 kW. Desain yang sangat ringkas. Dimensi: 1.100 x 1.500 x 1.200 mm. Berat: 570 kg.

Kondisi: baru, Tahun pembuatan: 2026, en-1 Lajdsd Hkqhopfx Agyoh

Kondisi: baru, Tahun pembuatan: 2026, Production time approx. 4-5 months --- Our best-selling briquetting press series + Proven, straightforward technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio Lodpfochqxxsx Agyjah The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust construction, ensuring consistent briquette quality during continuous operation. The compaction process is performed without the addition of binding agents, relying solely on hydraulic pressure. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard hopper has a volume of approximately 0.5 m³. Hoppers with larger capacities or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. Depending on specific customer requirements, MPP NEM single units can be combined to create a complete system. The press’s chip container can be loaded manually, by conveyor belt, via extraction system, or with a tipping skip. For systems designed for fully automated operation, it is advisable to use a lift-tipping device in combination with a crusher. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of each briquette is 40 to 75 mm depending on the model, and the diameter, according to type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing coolant, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length are loaded into the storage hopper. A stirrer at the bottom of the hopper prevents material bridging and feeds material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the press block. The main press cylinder then compacts the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves up, and the stable briquette is ejected. Briquette production offers the following advantages: • Reduction of material volume by up to 90% • Emulsion recovery • Cost savings in storage and transportation • Economical disposal • Profitable resale -- Briquetting Press NEM 300 Throughput capacity: up to approx. 200 kg per hour *heavily dependent on material type. - On the last test with aluminium granulate under 5 mm – approx. 186 kg per hour + the recovered emulsion. - On the last test with aluminium shavings under 18 mm – approx. 120 kg per hour + the recovered emulsion. Technical data: Motor: 7.5 kW (+ 0.55 kW for cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Opt. briquette stroke: 80 mm Pump: 80 litres Storage hopper: approx. 0.5 m³ capacity (expandable)

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, panjang penggilingan: 2.200 mm, lebar penggilingan: 500 mm, tinggi penggerindaan: 450 mm, diameter roda gerinda: 400 mm, kecepatan meja: 30.000 mm/menit, panjang meja: 2.200 mm, lebar meja: 500 mm, lebar roda gerinda: 100 mm, kecepatan spindel (maks.): 4.000 rpm, berat keseluruhan: 10.000 kg, gerak cepat sumbu X: 30 m/menit, masa garansi: 12 bulan, pfs-2200x500-2024 Lajdpfx Agszbyp Tsyoh

Kondisi: baru, Tahun pembuatan: 2026, en-GB Laedpfod Nm Sijx Agyeh

Kondisi: baru, Tahun pembuatan: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Customs tariff code: 84659600 Feed opening: 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Knives: multiple reversible edges Hydraulically operated pusher Lsdod Dgw Uopfx Agyoah Screen perforation as required (10 - 40 mm) Extraction nozzle Ø 200 mm Weight: approx. 1,600 kg Dimensions (LxWxH): approx. 2290 x 1420 x 1750 mm Turbo clutch Standard features included: - automatic star-delta starting - high-speed hydraulics - automatic stop if rotor idles - Speed: 70-90 rpm for high throughput - Pulse control to avoid idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, chipboard, MDF panels and other materials (subject to trial and approval by the manufacturer) . Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,140 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm ±100 mm - Overbelt magnet + €5,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (start and stop each synchronized with the shredder) . Raw material requirements: - Moisture content (dry matter) must be below 30% - Installation temperature: temperature-controlled room at at least +5°C - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear

Tahun pembuatan: 2026, Kondisi: baru, The offer includes only the neodymium overband magnet, not the conveyor belt underneath. Neodymium magnets are among the strongest magnets in the world, featuring extremely high holding force and far outperforming ferrite magnets. Extremely high separation efficiency, depending on material flow height and input material. Probably the most compact overband magnet on the market. Competitors often use less powerful ferrite magnets to save costs. Approximate dimensions: Length: 104 cm Width: 22 cm Height: 28 cm (at the motor) *Without control system Surcharge for a simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. Ljdjdubpuopfx Agysah High-performance neodymium magnet: approx. 600 x 68 x 36.5 mm * Over a length of 600 mm, nails are attracted and deflected laterally, exiting the magnetic field region. This overband magnet should be installed approx. 7 - 10 cm above the material flow. *Mounting/suspension to be provided by customer depending on the maximum length of metal pieces. Ideal for separating nails from wood chips. Optionally, can also be used in a suctioned single-shaft shredder. Requirements: *Your belt width or internal usable width (of the existing conveyor belt) should ideally be less than 55 cm *Suitable for separating nails from material streams less than 12 mm high, with chip lengths below 25 mm. ----- Optional, at extra cost: Cross and incline conveyor demonstrators from €8,770 net

Tahun pembuatan: 2026, Kondisi: baru, Granulator MVZ 7.5 kW Demonstration unit available at a special price Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic parts or for post-shredding of wood chips. Further details can be provided after testing with your specific material. Our granulators are used for processing a wide range of materials, such as plastics or wood. Shredders and granulators are suitable for various size-reduction applications. For example, in injection molding, rejects and sprues are produced that need to be reprocessed. In blow molding, in addition to rejects, there are parisons or start-up waste. The system can process blow molding materials such as PET bottles, PE/PP bottles, canisters, buckets, pipes, and more. Material is fed from above via a hopper into the cutting chamber of the granulator. Inside, a rotor equipped with cutting knives shreds the material between the rotating knives and the stationary counter-knives mounted in the chamber until it passes as regrind through the screen located below the rotor. *Option: The ground material is usually transported pneumatically into big bags, silos, or other containers. The price applies only to the shredding plant as shown in image 1 - fan, cyclone, and filter are optional. --- Technical Data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger systems available on request (4 to 75 kW) Throughput up to 120 kg/h when shredding plastics *highly dependent on screen size and material Application example: Shredding PE 1000 plastic Input material: approx. 40 mm chip length Post-shredding to approx. 6 mm Throughput up to 50 kg/h with 6 mm screen (Throughput up to 80 kg/h with 8 mm screen) ___ For G30 wood chip post-shredding, much higher throughputs can be achieved: Up to a maximum of 400 kg/h with a 10 mm screen, *metered feed, e.g., via conveyor or auger. Further details after testing approx. 30 kg sample. Rotor diameter: 180 mm 6 rotor knives, each 225 mm 4 stator knives, each 225 mm Dimensions: 930x730x1420 mm Weight: 450 kg Suction connection: 100 mm Screens: 5, 6, 8, 10, 12, and 15 mm - additional screen sizes available Price per screen: €390 Price for replacement knife set: €679 Suitable for, for example: - All types of plastic waste Various materials: HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs, etc. Parts from injection molding, blow molding, sprue waste, small bottles, cables, small pipes, profiles, etc. --- Larger systems also available as an option: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *depending on screen and material Infeed opening: 620x400 mm *Optional with matching extraction/transport system Granulator MVZ / 30 kW Throughput up to 400 kg/h *depending on screen and material Infeed opening: 620x500 mm *Optional with matching extraction/transport system --- For system design, the following information is important: - Length x width x height of the input material? - Screen size: what final particle size (mm) is required? - Required throughput per hour (kg)? - Wall thickness (mm)? - Material description Photos can also be helpful. Lajded N Dn Dopfx Agyjh

Kondisi: baru, Tahun pembuatan: 2026, Production time for the machine is approx. 3.5 months Very robust machine with high pressing force - also suitable for producing a marketable briquette quality* depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional features: Surcharge for cooling unit: + €3,995 net (can also be retrofitted later) * Cools the pressing jaw (important for operations over 3.5 hours) and the hydraulic oil * Cooling unit recommended for continuous operation exceeding 3.5 hours at a time. Large pre-compactor chamber: + €1,975 net Recommended for light input materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (material-dependent): up to 110 kg/h* Last test: approx. 87 kg/h *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Lajdpfsffh Atox Agysh Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil capacity: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 cbm Pump: 37 liters Hydraulic pre-compactor Option for cooled pressing jaw: yes, with special accessory cooled pressing jaw Pressing jaw cooling via water tank (to be supplied by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette strand option: yes (material-dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and no more than 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Pre-shredder Base machine starting from €29,950 net *Options available at additional cost Ideal for pre-shredding bulky materials such as pallets, planks, beams, fruit crates, styrofoam, plastics, and more. For wood chip production, the pre-shredder can also be installed directly above a single-shaft shredder. Machine in pre-production *special options available at extra cost Your benefits: + Volume reduction of up to 70% + Significantly lower transport costs + Reduced disposal costs + Production of fuel material + Also ideal for pre-shredding in front of a single-shaft shredder to produce wood chips Weight: 1,200 kg Dimensions: 2050x850x1600 mm Cutting chamber opening: 1300x700 mm *also available optionally as 1600x700 mm (motor then 11 kW) (Surcharge: +€4,995 net) Throughput: up to 50 pallets/pieces per hour (highly material-dependent) Motor: 7.5 kW Lajdpfx Asfd Icisgyoh Options: Industrial discharge hopper (3 sides closed) +€4,950 net Extra emergency stop button +€495 net 200 mm height increase +€497 net Feed material requirements: - Moisture content less than 30% ATRO - The machine must be installed in accordance with CE directives and must be secured by the operator to prevent access from below (to the cutting unit) - Pallets up to a size of 1200x800 mm can be processed Longer pieces can also be fed upright

Kondisi: baru, Tahun pembuatan: 2025, Ideal for shredding straw, polystyrene foam (EPS), leaves, hay, and bread. Lajdpfx Agjzbizjysh Throughput is highly dependent on the screen and input material: - up to a maximum of 350 kg/h for straw with a 15 mm screen - up to 60 kg/h for EPS with a 15 mm screen Motor: 11 kW, 400 Volt (alternatively 9.2 kW or 15 kW available upon request) Optional: *Surcharge for next largest machine with 18.5 kW and larger silo diameter: + €2,750 net Robust steel construction Hardened cutting blades Screen with interchangeable inserts Available perforations: 10, 15, 22, 26, 30, 40, or 60 mm When equipped with electric drive: star-delta switch, overload protection, and 8 m ready-to-plug power cable Blow-out nozzle, 150 mm diameter Suitable for plastic or grain pipes Blowing distance approx. 12 m Chassis with 2 running wheels Ø 380 mm and a swiveling support wheel Ø 125 mm All wheels with solid rubber tires Dimensions approx. 1200 x 900 x 1270/1400 mm (LxWxH) Weight approx. 240 kg Spare part prices and options: 24 hardened blades, €9.90 each net 6 bolts, €14.90 each net 1 screen, €475 net Lid, €290 each net Polystyrene disk, €600 each net

Kondisi: baru, Tahun pembuatan: 2026, c4a1bb14 Ljdpfxschuvrs Agyeah

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, jam operasional: 27 h, A briquetting press machine R2, currently available for immediate delivery. *Subject to prior sale *Round silo available at additional cost The press is only deliverable in combination with a system component such as a shredding plant, semi-automatic briquette packaging unit, cutting mill, hammer mill, transport auger, conveyor belt with overband magnet, or extraction system. Industrial hydraulic briquetting press for rectangular briquettes with extraction system. Ex-demo machine available at a special price. Optional mounting silo with discharge: + €19,995 net The ideal machine for professional, industrial briquette producers. Type R – throughput up to 500 kg/h (*depending on material) Options at additional cost: Lajdpfegbpm Tjx Agysh Plant engineering / mütek Systemtechnik: - mütek Shredder MRZ size reduction technology - Conveyor belts - Overband magnets - Extraction units, optionally with rotary valve - Transport augers - Silos - Custom control system interconnections - Semi-automatic packaging systems Press: - Hydraulic oil heater (recommended for outdoor installations) - Control cabinet heater (recommended for outdoor installations) - Your initials/logo on the stamp - Color of your choice - Packing table with drawer - Inspection door in the hopper - Additional silo with discharge Your advantages: Key point: + Well-established, proven matrix press thanks to 25 years of experience. The challenge and know-how lie in the details, e.g., highest quality valves and hydraulic cylinder seals used. + Optimized, advanced briquette length control. Excellent system for regulating consistent briquette length. + 24h operation possible + Long service life + Low maintenance costs + Compact design + High energy efficiency due to innovative hydraulics *Depending on the bulk density of your raw material *Based on a bulk density of 200 kg per cubic meter Precise information after successful test with your material Drive motor: 22 kW – IE3 400 V / 50 Hz / 3-phase Oil cooler: 2.2 kW Agitator: 0.55 kW Screw conveyor: 1.5 kW Hopper: 400x800 mm Capacity approx. 150 liters Soft start for hydraulic motor Siemens PLC S7-1200 Auto start and stop via a light barrier integrated into the feed hopper Up to 560 briquettes per hour Specific pressing pressure: 1,700 kg/cm² Up to 300 bar operating pressure Briquette size: 150x60 mm Briquette length: 40 to 110 mm (adjustable) Dimensions: 2.9 x 2.0 x 2.1 m Weight: 3,800 kg 600 liter hydraulic oil reservoir Control system designed for operation from +8°C to +35°C Feed material requirements: - Moisture content (air-dry) must be between at least 6% and a maximum of 15% - Maximum chip size: 20 x 2 x 2 mm - Installation temperature: heated room with minimum +8°C Otherwise, we recommend a heater (available at additional cost) - Feed must be free from metals and mineral impurities such as sand, stones, etc. Damage to the press tools and/or increased wear may occur otherwise.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, jam operasional: 29 h, Another machine immediately available ex works from Neckartailfingen *Interim sale expressly reserved *Silo available at additional cost Press only available when ordered with a system component - such as a shredder, cutting mill, hammer mill, screw conveyor, belt conveyor with overband magnet, or extraction unit RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette vendors. Type Classic – throughput up to 425 kg/h *depending on material Options (subject to additional charge): plant engineering / mütek system technology: - mütek Shredder MRZ size reduction technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary airlock - Screw conveyors - Silos - All types of control system integrations - Semi-automatic packaging equipment Your benefits: Key point: + Highly established, mature matrix press thanks to 25 years of experience. The challenge and expertise are in the details, e.g., top-quality installed valves and cylinder seals. + 24/7 operation possible + Long service life + Low maintenance costs + Compact design + High energy efficiency thanks to innovative hydraulics Technical data – Briquetting press: Throughput capacity: up to 425 kg/h* *depending on bulk density of your input material Ljdpsfhql Tsfx Agyeah *based on 200 kg per cubic meter bulk density Detailed information after successful testing with your material. If test material cannot be provided, we cannot guarantee briquette quality or throughput capacity. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compactor Hydraulic main compactor Pressing force: approx. 1,700 kg/cm² Hydraulic system with 260-liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 phase Manual operation for all cylinders Control cabinet "dust-protected" with PLC control and touch display Total power consumption of the briquetting press: approx. 33 kW Requirements for raw material: - The moisture content (atro) must be at least 6% and max. 15% - Maximum chip size: 20 x 2 x 2 mm - Ambient installation temperature: min. +8°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to press tools and/or increased wear may result.

Kondisi: baru, Tahun pembuatan: 2025, de Laodpfom Twnlox Agyoh

Kondisi: baik (bekas), Tahun pembuatan: 2025, Persyaratan: - Bahan harus mudah mengalir (berukuran kurang dari 18 mm) - Bahan harus bersih, kandungan abu kurang dari 1% ATRO Perhatian untuk: pasir, batu, dan mineral - Bahan dipadatkan dengan menggunakan alat penjepit - Bahan harus kering, maksimal 15% ATRO Baru: Kombinasi inovatif antara briket dan pelet Opsi dengan biaya tambahan: Pembangunan pabrik / sistem mütek: - mütek Shredder MRZ, teknologi penghancur - Ban konveyor - Magnet di atas ban konveyor - Sistem penyedot debu, opsional dengan pengumpan seluler - Pengumpan sekrup - Silo - Koneksi kontrol dari semua jenis - Teknologi pengemasan semi-otomatis + Operasi 24 jam dimungkinkan + Konstruksi yang ringkas + Efisiensi energi tinggi berkat sistem hidrolik inovatif + Kepadatan briket hingga ≥ 1 kg/l dimungkinkan *Detail setelah pengujian Cara kerja: Mesin ini memiliki silo dengan pengaduk. Di setiap dari 4 sudut silo, terdapat pengumpan sekrup vertikal yang memadatkan bahan ke bawah ke dalam ruang pemadat. Mesin bekerja dengan dua silinder, yang masing-masing memadatkan dalam dua arah (baik saat silinder bergerak maju atau mundur). Hal ini menghasilkan 4 saluran keluar briket dengan masing-masing 6 briket terpisah. *ideal untuk pengisian otomatis ke dalam boiler pemanas Ukuran Ø 30 mm Kapasitas produksi hingga maksimal 310 kg/jam Daya motor: sekitar 29 kW (total); dalam operasi berkelanjutan sekitar 30% lebih rendah Dimensi: 3,1x2,3x2,2 m Berat: 3,55 ton Keuntungan Anda: Ukuran briket/pelet yang ringkas memungkinkan pembakaran di instalasi pembakaran industri melalui pengumpanan sekrup Operasi otomatis 24 jam dimungkinkan Efisiensi energi tinggi Briket/pelet dengan kualitas & kepadatan yang konsisten Untuk pengumpanan otomatis ke dalam instalasi pembakaran industri Lodpfxsfbb Aro Agysah Jumlah kecil hingga sedang serpihan kayu, yang dihasilkan dalam industri pengolahan berbagai bahan (terutama kayu, biomassa, dll.), dapat dipadatkan secara optimal. Ukuran kecil Ø 30mm merupakan alternatif yang menarik. Berbeda dengan briket kami yang konvensional, briket ini dapat diumpankan secara otomatis ke instalasi pembakaran industri. Selain kayu, berbagai bahan lain juga dapat diproses dengan mudah (berbagai jenis biomassa & bahan baku agar-agar).

Tahun pembuatan: 2022, Kondisi: baru, Highlights of our two extraction systems, Eco 3000 and Eco 5000 +Robust sheet metal construction ensures optimum airflow characteristics +Durable impeller +Consistent extraction performance even under continuous operation +Connection for up to 3/4 machines possible via supplied manifold +High suction power thanks to large filter surface (filter size: ø500x1100mm) +Integrated mobility kit for easy maneuvering Scope of delivery: mobile chassis, filter and chip bag, manifold (connections for 3/4x ø100mm extraction pipes), including closure caps --- Device available in two versions: * Designated below as Position 1) and 2) 1) Extraction Unit Eco 3000 – 1.5 kW * with one chip bag and one industrial polyester filter Motor power S1: 1500 W Dimensions (LxWxH) in mm: 985x560x2250 Airflow rate in m³/h: 3,000 Extraction outlets: 3x (ø100mm) Vacuum in Pa: 2,200 2) Extraction Unit Eco 5000 – 2.2 kW * with two chip bags and two industrial polyester filters Motor power S1: 2200 W Dimensions (LxWxH) in mm: 1540x560x2270 Lajdpeidma Nsfx Agyoh Airflow rate in m³/h: 5,000 Extraction outlets: 4x (ø100mm) Vacuum in Pa: 2,600 --- Applies to both units: Sound pressure level: < 85 dB(A) Voltage: 400V / 50Hz *Option: also available in 230 V Chip bag diameter in mm: 500 Chip bag length in mm: 850 Delivered in a box for easy self-assembly Filters must be manually cleaned at regular intervals. Surcharge for automatic self-cleaning extraction system: + €4,700 net

Kondisi: baru, Tahun pembuatan: 2023, Length: approx. 2500 mm Width: approx. 400 mm Discharge height: approx. 1650 mm Weight: 290 kilograms Motor: 0.75 kW Lodpfjv Srvvsx Agyjah Ex works pricing Shipping according to actual cost

Tahun pembuatan: 2025, Kondisi: baru, Horizontal intermittently operating, gear-driven packaging machine for the automatic production, filling, and sealing of flat sachets with either regular or irregular shapes, optionally with euro hole, without zip seal. 3-side sealing or 4-side sealing selectable. Especially suitable for medium-sized sachets. Integration of various filling systems possible (auger filler, scale, volumetric dosing, liquid, paste and other dosing units). One sachet is processed per production cycle. Main components: PLC, touchscreen operating monitor (menu available in various languages, e.g. English, German, etc.), temperature control. - Specifications: Sachet sizes (min.-max.): L(80-225)xW(50-180)mm; max. filling volume: 400ml; max. machine cycle rate idling: 70 cycles/minute; 4.5kW; 12m³/h; machine dimensions: (L)3500x(W)970x(H)1500mm; weight: 1400kg. All product-contact parts are made of stainless steel (SS304). The dosing systems and/or additional add-on modules shown in the machine photo (e.g. outfeed conveyor or similar) are optional features for this position and are shown for illustration purposes only. The machine is suitable for a variety of composite films. We will be happy to check and confirm the appropriate compatibility based on a sample. Ljdpfxjv Nlums Agyoah The machine/system is also available in further configurations for different packaging sizes and packaging speeds. Please note that our new prices are often below the usual prices for used equipment. Please do not hesitate to contact us and let us know your packaging requirements. - We usually have 30-50 different new machines immediately available from stock. For custom-built machines, we offer very short delivery times from approx. 3 weeks. - All machines are available with full warranty.

Tahun pembuatan: 2025, Kondisi: baru, Horizontally operating, intermittent, gear-driven packaging machine for the automatic production, filling, and sealing of flat pouches with regular or irregular shapes, optionally with euro hole or zip closure. Adjustable for 3-side or 4-side sealing. Especially suited for medium-sized pouches. Integration of various dosing systems possible (auger filler, weighing system, volumetric dosing, liquid, paste, and other dosing units). One pouch is processed per production cycle. Main components: PLC, touchscreen control panel (menu available in various languages such as English, German, etc.), temperature control. - Specifications: Pouch sizes (min.-max.): L(80-225)xW(50-180)mm; max. fill capacity: 400ml; max. machine cycle rate in idle: 70 cycles/minute; 5.5kW; 12m³/h; machine dimensions: (L)4650x(W)970x(H)1500mm; weight: 1600kg. All product-contact parts are made of stainless steel (SS304). Dosing units and/or additional attachment modules (e.g., discharge conveyor or similar) shown in the machine photos are optional extras for this listing and are for illustrative purposes only. The machine is suitable for a wide range of composite films. We are happy to check and confirm compatibility by means of sampling. The machine/system is also available in other versions for different packaging sizes and speeds. Laedpfov Nluyox Agyjh Please note that our new prices often lie below typical used equipment prices. Feel free to contact us and tell us about your packaging requirements. - We typically have 30-50 different new machines available from stock at all times. For customer-specific machines, our lead times are very short, from approx. 3 weeks. - All machines are available with a full warranty.

Tahun pembuatan: 2025, Kondisi: baru, Horizontally operating, intermittent, gear-driven packaging machine for the automatic production, filling, and sealing of flat pouches with regular or irregular shapes, equipped with a top rotary closure. Three-side or four-side sealing is adjustable. Particularly suitable for medium-sized pouches. Integration of various filling systems possible (auger filler, scale, volumetric dispenser, liquid, paste, and other dosing units). One pouch is processed per production step. Main components: PLC, touchscreen operation monitor (menu available in different languages, e.g., English, German, etc.), temperature control. - Specifications: Pouch sizes (min.–max.): L(80–225) x W(50–180) mm; max. filling capacity: 400 ml; max. output rate (idle): 70 cycles/minute; 5.5 kW; 15 m³/h; machine dimensions: (L) 4500 x (W) 970 x (H) 1500 mm; weight: 1800 kg. All parts that come into contact with the product are made of stainless steel (SS304). The dosing units and/or other additional attachments (e.g. outfeed conveyor or similar) shown in the machine photos are optional equipment and serve for illustration purposes only. The machine is suitable for a wide range of composite films. We are happy to test and confirm compatibility based on a sample. This machine/system is also available in other versions for different packaging sizes and speeds. Laodpjv Nlu Hsfx Agyjh Please note that our prices for new machines are often lower than the typical prices for used equipment. Feel free to contact us with your specific packaging requirements. – Usually, 30–50 different new machines are available ex-stock at any given time. For custom-built machines, we offer very short delivery times, from about 3 weeks. – All machines are available with full warranty.