Beli Rausch Mesin Broaching Vertikal Rausch Rs bekas (81.897)

Tahun pembuatan: 1964, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2016, Used vertical hydraulic internal broaching machine with 3 broaching stations Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between stations: 380 mm Lhodpjt Dv I Ajfx Al Nsi Draw head mounting diameter: 3 x Ø ___mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 2,200 x 1,550 x 4,200 mm (without pit) Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special Equipment: The machine is equipped with a workpiece table featuring 3 bores for the 3 broaching stations. The tooling clamping system is designed for spring-actuated locking in the pull bridge and hydraulic-mechanical clamping in the feed unit. The machine was retrofitted electrically (Siemens S7 PLC) and mechanically in 2004. An integrated coolant system is included. Remarks: The machine is designed for series production use; for optimum utilization, a foundation (pit) is ideally required or optionally a raised platform. Draw heads and extractor needles are available upon request. The machine can be inspected at our warehouse.

Tahun pembuatan: 1971, Kondisi: bekas, General / Technical Data: Manufacturer: Varinelli Model: BVE-S-25-2000 Year of manufacture: 1971 Weight: 12 tons Tensile force: 25 tons Maximum stroke: 2000 mm Clamping surface: 500 x 500 mm Table opening: 550 mm Power supply: 380 Volts / 50 Hz Accessories / Special equipment: - Tilting table Note: The machine is connected to power at our warehouse and can be inspected. Ledslwvm Aepfx Al Nohi

Tahun pembuatan: 1961, Kondisi: bekas, General / technical data: Vertical duplex external broaching machine with two tables Manufacturer: Karl Klink Model: RSA 10 T/Zw. Year of manufacture: 1961 Weight: approx. 6,500 kg Lhjdelwu Hrjpfx Al Nsi Pulling force: 10 t Broaching speeds: 1 - 11 m/min Return speeds: 7 - 25 m/min Maximum stroke per machine unit: 1,250 mm Clamping surface: 500 x 500 mm Passage width: 380 mm Power supply: 380 Volts / 50 Hz Notes: The machine is powered and available for inspection at our warehouse.

Tahun pembuatan: 1960, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: 1732, Vertical internal broaching machine with indexing table from Karl Klink Type: RSI6DT Machine No.: 1732 Year of manufacture: 1960 Weight: 3.2 tons Broaching force: 6,000 kg With indexing table (2 stations) Power supply: 380V / 50Hz Rated current: 15 A Lsdogyd Svopfx Al Njhi Connected load: 4 kW The machine has been fully overhauled and is therefore in very good condition.

Tahun pembuatan: 1964, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: 2041, Vertical internal broaching machine with index plate by Karl Klink Model: RSI8DT1 Machine no.: 2041 Year of manufacture: 1964 Weight: 3.2 t Broaching force: 8,000 kg With index plate (2 stations) Power supply: 380V / 50Hz Rated current: 25 A Connected load: 5.5 kW Lhedpfx Alsgyd S Dj Noi The machine has been completely overhauled and is thus in very good condition.

Tahun pembuatan: 1990, Kondisi: sangat baik (bekas), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical specifications: Vertical internal broaching machine in very good technical condition Pulling force: 16,000 kg Broaching speed: up to 27.5 m/min, steplessly adjustable Return speed: up to 34 m/min, steplessly adjustable Maximum stroke: 1,250 mm Broaching stations: 4 units Equipment: - Automatic tool changer Lodpfelpadysx Al Nehi - Automatic workpiece feed (workpiece-specific) - Hydraulic tool clamping device (workpiece-specific) Remarks: High-performance production broaching machine for large-scale series production with high cutting speed!

Kondisi: bekas, Tahun pembuatan: 2000, de-techdetails-01 Lodpfx Alew Dugae Njhi

Tahun pembuatan: 1983, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg Lhjdpfx Alsd Nb A Ne Nsi General Information / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition - Pulling force: 16,000 kg - Broaching length: 1,250 mm - Broaching stations: 3 units - Distance between broaching stations: 125 mm - Clamping diameter for draw heads: 3 x Ø 80 mm - Pass-through width between cylinders: max. 435 mm - Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min - Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min - Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit base) - Power supply / rated connected load: 380 Volt, 50 Hz / 22 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-operated draw heads according to DIN 1417/18 for locking broaching tools in the draw bridge. The needle extractor heads in the tool feeder are hydraulically locked. The machine includes a coolant system with integrated magnetic band chip conveyor for installation in a pit. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in serial production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle extractors are available upon request. The machine can be inspected at our warehouse.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1984, nomor mesin/kendaraan: 60173/589, berat keseluruhan: 2.500 kg, daya: 4 kW (5,44 hp), tegangan masuk: 380 V, frekuensi input: 50 Hz, panjang total: 1.500 mm, lebar total: 1.200 mm, tinggi total: 5.500 mm, RAUSCH RS 6/1300 mesin broaching - Arus nominal: 18,5 A - termasuk beragam aksesori serta satu perpanjangan Lhodpfjzdy Ruox Al Nji Perhatian: Barang harus diambil secara mengikat antara 04.08. dan 13.08.2026 pada tanggal yang akan disepakati. FCA D-79268 Bötzingen – dimuat di truk

Tahun pembuatan: 1960, Kondisi: baik (bekas), nomor mesin/kendaraan: 758, Overhauled Towing capacity: 2 t Ledpfjbrcmhex Al Nshi Lift: 1000 mm

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1968, nomor mesin/kendaraan: 51039/373, Vertical Internal Broaching Machine Rausch RS 6G (WAG 855) Manufacturer: Rausch (Haan/Rhld) Model: RS 6G / 1000 Machine No.: 51039/373 Year of manufacture: 1968 Weight: 800 kg Overhaul: 12/2024 by Wiemers AG General / Technical Data: Completely overhauled mechanical vertical broaching machine Rausch RS 6G, unused, with “CE” marking Pulling force: 60 kN (6,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table size / work area: 610x470 mm / 520x320 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unrestricted Dimensions (H x W x D): 1600 mm x 850 mm x 1000 mm (H = table height to floor without superstructures) Motor power: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Equipment: - Gear motor drive with 2 working speeds - Reinforced pull bridge made of tool steel for higher pulling forces - Safety door with automatic locking and safety interlock - New chip chute with tool parking facility Lodpfjv Rmvzox Al Nehi - Protective covering for stroke adjustment - Oil-tight shelf on the control cabinet - Electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the pull bridge; extra safety for operator & tool) - Integrated coolant system with electrically actuated solenoid valve and drain tap - Coolant swivel system, with automatic coolant switching via the swivel system - Chip sieve with magnet - Externally adjustable tool length setting system (reproducible across machines) - Stainless steel control panel with durable labeling - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun Remarks: The machine is completely overhauled. During the overhaul, the machine base, machine body, and table have been completely refurbished. All wear parts have been replaced. The machine is upgraded to the state-of-the-art and complies with current “CE” regulations. It is supplied with a “CE” certificate. General: The double spindle drive provides smooth operation and a central pull point as well as a constant broaching speed (selectable broaching speed: 3 m/min or 6 m/min). The design enables quick and easy setup for keyway broaching using flat broaching tools. Thanks to the universally designed pull bridge and machine table, profile and flat broaching tools can be used without the need for additional broach holders. Matching broaching tools and mandrels for this machine are available on request.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, panjang broaching: 1.000 mm, jumlah posisi broaching: 1, kecepatan broaching: 3 m/menit, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680kg Overhaul: 11/2024 by Wiemers AG General / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Tensile force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / working surface: 610 x 470 mm / 520 x 320 mm Table bore: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (h x w x d): 2,250 mm x 850 mm x 1,200 mm (h = table height to floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional changes/optimisations made to the original machine: - External stroke adjustment - New cross-machine, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety guard door with monitoring (integrated in the emergency stop circuit) - Machine enclosure below the guard door, with chip guard and tool storage area - Electrical probe for clamping jaws (tool removal check to prevent unintentional retraction of the pull bridge) - Coolant swivel system with switching solenoid valve during the swivel process (enables coolant to be switched on before broaching stroke is initiated » visual check of lubricant flow—no dry cut!) - Routing of electrical cables in steel protective conduits - Heavy-duty control cabinet bracket for machine components - Additional oil-tight tray mounted on the control cabinet - Three-sided splash guard cabin (w = 960 x d = 450 x h = 590 mm) - Reinforced chip screen with magnetic separator - Operating panel made of stainless steel sheet with durable labeling - Four central lubrication points for the trapezoidal spindle drive Remarks: The machine has been completely overhauled; the machine body is fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made of cast wear-resistant bronze - All bearings and seals replaced Lodpsw Ighijfx Al Nshi - The coolant system (pump, solenoid valve, drain valve), including the coolant/lubricant swivel system, is new - The clamping jaws are new - The complete electrical system (control cabinet) is new - All covers and enclosures are new - The following components have been overhauled and reused: -- Machine base -- Machine stand -- Machine table with table insert -- Pull bridge (clamping jaws are new) -- Gear wheels -- Electric motor (new brake, new bearings) The machine is in stock at our warehouse and can be inspected under power. The images attached are original photos of the machine. The machine is CE certified. The CE certificate corresponds to the 1998 standard (first overhaul).

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2023, tegangan masuk: 400 V, panjang broaching: 1.000 mm, jumlah posisi broaching: 1, kecepatan broaching: 3 m/menit, Manufacturer: Rausch (Haan/Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580kg Overhauled: 3/2023 by Wiemers AG General / technical data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4 with current "CE" marking Pulling force: 40 kN (4,000kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / working area: 540 x 340mm / 450 x 250mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited Lhedpfxew H Dgnj Al Noi Dimensions (h x w x d): 2,350mm x 900mm x 1,000mm (with splash-guard enclosure) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / special equipment: - Dual-speed drive - Safety door with interlock and chip chute - Chip chute with integrated tool tray - Electric clamping jaw sensing (tool removal control to prevent unintentional return of the carriage) - Integrated coolant system with solenoid valve (operated via pivot system) - Patented coolant/lubricant pivot system - Externally adjustable tool length setting system (reproducible across machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broach tools (keyway tools) - Three-sided closed splash guard enclosure with tool tray (ideal for profile broaching) - External control panel (connected via Harting connector) Note: The machine has been completely overhauled, and the machine body fully refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, check valve, and drain cock) including the coolant/lubricant pivot system is new - Coolant supply is controlled by a solenoid valve, which can be operated via the pivot system - The carriage as well as clamping jaws and gear segments are new - A switchable clamping jaw monitoring system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal indicator, and door locking mechanism - The tool length setting system has been relocated outside the machine enclosure - Additional limit switches have been installed - The complete electrical system (control cabinet) is new - No PLC is installed; the machine is electrically maintenance-friendly - New drive motor (by SEW Germany) with brake - The machine has been newly painted with 2-component structural paint General: The double spindle drive ensures smooth and central pulling as well as a constant broaching speed (broaching speed selectable at 3 m/min or 6 m/min). Due to its design, the machine is quick and easy to set up for broaching with flat broach tools for keyway machining. Thanks to the universally designed carriage and machine table, both profile and flat broaching can be performed without the need for additional pull heads.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, berat keseluruhan: 400 kg, tegangan masuk: 400 V, panjang broaching: 1.000 mm, Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3714/1070 Year of manufacture: 1995 Weight: 400 kg Overhaul: 04/2025 by Wiemers AG General / Technical Data: Unused, overhauled, mechanical vertical broaching machine Rausch RS 3, with CE marking Pulling force: 3,000 kg Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table size / working surface: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90 mm for standard broaching tools “Rausch system” Workpiece diameter: arbitrary (removable coolant swivel system) Broaching capacity / slot width: up to 18 mm in steel (from 16 mm slot width only with stepped tool shanks) Dimensions (H x W x D): 2,250 mm x 800 mm x 750 mm (height incl. 3-sided safety enclosure) Motor: 2.5 kW / 3.0 kW Electrical supply: 400 Volt / 50 Hz Equipment: - Gearmotor drive with 2 working speeds - Safety door with safety monitoring (emergency stop circuit) - Easily removable chip chute with storage for tools - Externally adjustable tool length setting system (Rausch system) - Protective cover for stroke adjustment and electrical switch units - Electrical detection of clamping jaws (prevents unintentional return of the pull bridge, providing additional safety for operator and tool) - Integrated coolant unit - Coolant swivel system (without electrical switching function) - Three-sided splash guard hood with wide, front-opened working area Lodpew Huh Nefx Al Nshi - Extra reinforced chip basket and chip sieve with magnetic insert - Stainless steel operator panel with permanent marking - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun - New machine documentation - “CE” marking from manufacturer (1995) Remarks: The machine has been overhauled, with the machine body completely refurbished. The following wear parts have been replaced/renewed: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced - Coolant system incl. coolant/lubricant swivel system replaced - New dual-speed SEW gearmotor - New electrics (Siemens) - New safety door instead of light barrier - New clamping jaws - All sheet metal parts, such as covers, chip chute, basket, sieve, and spindle guard, are new - Stainless steel operator panel with permanent marking - Machine repainted with 2-component structural paint The machine carries the manufacturer’s CE marking. General: The double-spindle drive ensures smooth operation with a central pulling point and consistent broaching speed. The machine is primarily designed for producing keyway slots up to 18 mm (from 16 mm slot width only with stepped tool shanks). Due to its design, the machine enables quick and easy setup for broaching with flat broaching tools for keyways. The universally constructed pull bridge and machine table make it possible to use both profile and flat broaching tools without additional pull heads.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 008078, jarak pergerakan sumbu X: 850 mm, jarak lintasan sumbu Y: 550 mm, jarak gerak sumbu Z: 630 mm, model controller: Fanuc O-M, kecepatan rotasi (maks.): 8.000 rpm, RINCIAN TEKNIS Rentang pergerakan sumbu X: 850 mm Rentang pergerakan sumbu Y: 550 mm Rentang pergerakan sumbu Z: 630 mm Pemasangan spindel: ISO40 Ljdpfx Alszi D Rpo Nehi Kecepatan putar: 8.000 RPM Luas permukaan meja: 1.000 x 540 mm RINCIAN MESIN Pengendali: Fanuc O-M Jumlah posisi majalah penukar perkakas: 24 Berat: 5.500 kg PERLENGKAPAN Roda tangan elektrik Bak serpihan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 750 mm, jarak gerak sumbu Z: 750 mm, model controller: Heidenhain TNC426, kecepatan rotasi (maks.): 12.000 rpm, Tidak ada harga minimum – penjualan dijamin dengan penawaran tertinggi! Lhodpfxszi D Rco Al Noi RINCIAN TEKNIS Jarak tempuh sumbu X: 1.000 mm Jarak tempuh sumbu Y: 750 mm Jarak tempuh sumbu Z: 750 mm Ukuran meja: 1.150 x 700 mm Jenis spindel: SK40 Rentang kecepatan: 12.000 RPM RINCIAN MESIN Pengontrol: Heidenhain TNC426 Berat mesin sekitar: 10.500 kg PERALATAN Pengubah alat otomatis 30 posisi Roda tangan elektronik Wadah serpihan Sistem pendingin

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 500 mm, model controller: Heidenhain TNC 410, kecepatan rotasi (maks.): 10.000 rpm, Tidak ada harga minimum – penjualan dijamin dengan penawaran tertinggi! RINCIAN TEKNIS Jarak gerakan sumbu X: 800 mm Jarak gerakan sumbu Y: 500 mm Jarak gerakan sumbu Z: 500 mm Rentang kecepatan: 0–10.000 RPM Pengaturan kecepatan: variabel Pemasangan perkakas: SK 40 Jumlah tempat di majalah: 20 RINCIAN MESIN Pengontrol: Heidenhain TNC 410 Ljdpfxezmryyo Al Nehi Permukaan penjepitan: 1.000 × 500 mm PERALATAN Meja sudut tetap Pengubah perkakas vertikal Kabinet pelindung penuh dengan pintu geser dan lampu interior Berbagai jenis pemasangan perkakas SK 40 Roda tangan elektronik Sistem pendingin dengan pompa yang ditingkatkan Tekanan pendingin: 20 bar Konveyor serpihan Buku petunjuk pengoperasian

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jam operasional: 4.373 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1163744, jarak pergerakan sumbu X: 1.016 mm, jarak lintasan sumbu Y: 660 mm, jarak gerak sumbu Z: 635 mm, berat benda kerja (maks.): 1.814 kg, kecepatan spindel (maks.): 10.000 rpm, Tidak ada harga minimum – penjualan dijamin dengan penawaran tertinggi! RINCIAN TEKNIS Jarak perjalanan sumbu X: 1.016 mm Jarak perjalanan sumbu Y: 660 mm Jarak perjalanan sumbu Z: 635 mm Kecepatan spindel: 10.000 RPM Lhodozlxnhspfx Al Noi Kecepatan cepat sumbu X: 18.000 mm/menit Kecepatan cepat sumbu Y: 18.000 mm/menit Kecepatan cepat sumbu Z: 18.000 mm/menit Panjang umpan sumbu X: 1.016 mm Panjang umpan sumbu Y: 660 mm Panjang umpan sumbu Z: 630 mm Kecepatan umpan sumbu X: 12.700 mm/menit Kecepatan umpan sumbu Y: 12.700 mm/menit Kecepatan umpan sumbu Z: 12.700 mm/menit Panjang benda kerja (maks.): 1.370 mm Lebar benda kerja (maks.): 610 mm Tinggi benda kerja (maks.): 630 mm Berat benda kerja (maks.): 1.814 kg Lebar meja: 610 mm Tinggi meja: 630 mm Panjang meja: 1.372 mm Kapasitas beban meja: 1.814 kg Jumlah slot di majalah perkakas: 30 RINCIAN MESIN Produsen kontrol: Haas Daya terukur: 45 kVA Torsi: 460 Nm Daya motor spindel: 44,7 kW Dimensi (P x L x T): 1.370 x 660 x 630 mm Jam operasi: 6.617 jam Jam operasi spindel: 4.373 jam PERLENGKAPAN Konveyor serpihan dengan 4 sekrup umpan tambahan Pemasang perkakas ISO 50 Pengubah perkakas otomatis (ATC) 30 posisi Pemotongan ulir yang disinkronkan RTAP-3 TSC 300 psi (21 bar) Pendingin cairan pendingin Nozel cairan pendingin yang dapat diprogram PELUMAS MIN QTY (Pelumasan Jumlah Minimal) Nozel udara otomatis Pendinginan udara melalui spindel Renishaw WIPS Pemesinan Kecepatan Tinggi Filter ACF 25 mikron Pendingin lemari kontrol Pemisah kabut Sumbu ke-4 terhubung sebelumnya DWO/TCPC Konektivitas WIFI ke jaringan lokal Kamera WIFI Pintu otomatis 15 dudukan perkakas

Kondisi: bekas, Tahun pembuatan: 2007, Langkah-x 760 mm Langkah-y 510 mm Langkah-z 610 mm Luas permukaan meja 1.020 x 510 mm Pengontrol WINMAX Kecepatan putaran spindel 12.000 RPM Lhjdpoznnc Tefx Al Nei Motor spindel 13,5 kW Kapasitas majalah 24 buah Adaptor SK 40 Saluran pendingin internal 20 bar Kecepatan cepat 35/35/30 m/menit Berat mesin sekitar 5,0 ton Pusat pemesinan vertikal bekas dengan 4 sumbu - Pengganti lengan ganda - Saluran pendingin internal dengan filter kartrid - Pendingin oli spindel - roda tangan eksternal

Kondisi: bekas, x-perjalanan 1016 mm y-perjalanan 660 mm z-perjalanan 635 mm Kontrol Haas Luas meja penjepit 1.372 x 610 mm Kapasitas meja 1.814 kg Lhjdewvl Acjpfx Al Nji Rapid traverse 18 m/menit Rentang putaran 7.500 rpm Daya penggerak spindle milling 22,4 kW Konektor alat SK 50 Jumlah alat dalam magazin 30 buah Berat mesin sekitar 7,5 t Dimensi P x L x T 3,5 x 2,47 x 2,98 m Pusat pemesinan vertikal dengan sumbu ke-4 - Sumbu ke-4, HRT 210 A dengan tailstock - Konveyor serbuk spiral - Penukar alat lengan ganda - Handwheel eksternal - Pendingin internal - Filter kartrid - Sistem ekstraksi kabut oli - Persiapan untuk probe pengukur 3D Renishaw IR

Kondisi: baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Manufacturer: BOSCH Model: SVZ 2500 A Maximum bag length: 400 mm Minimum bag length: 100 mm Lhsdpfsrrv T Iex Al Noi Maximum bag width: 250 mm Minimum bag width: 90 mm Maximum output: 80 bags/min

Kondisi: baik (bekas), Manufacturer: WMW VEB Type: FW 200×630 Lsdpfx Aoik Hcuol Nohi X-Y-Z travel: 380 – 140 – 230 mm Table size: 200 x 630 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, x-travel 1,250 mm y-travel 880 mm z-travel 800 mm Main spindle: Ledpogypabofx Al Njhi Speed range - main spindle max. 12,000 rpm Drive power - main spindle 15 / 10 kW Table clamping surface 1,500 x 1,050 mm Number of tool stations 30 positions.

Kondisi: bekas, CNC 3+2 Axis Vertical Machining Center DECKEL MAHO Type DMU 35 M CNC Control SIEMENS 810D with ShopMill Serial No. 11065353554 Year of manufacture: 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal Swivel Rotary Table: 400 x 290 mm, center bore 30H6 Table load: max. 100 kg Distance spindle nose – table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse ( X / Y / Z ): 5 m/min Input increment: 0.01 mm Total power consumption: 15 kVA Spindle speed range: 20 - 6,300 rpm Spindle drive power: 6.3 / 10 kW (100% / 40% duty cycle) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull stud: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power supply: 400 Volt, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3 axes controlled (X, Y and Z axes) - Manual swivel rotary table, C-axis = 360° table rotation, B-axis = swivel range +105° / -15° - Direct position measuring system for all 5 axes - Electronic handwheel - Spindle drive via servomotor with toothed belt and 2 gearbox stages Lodpfx Alsvt D D Ue Nehi - Fully enclosed cabin with sliding door - Swiveling control panel - Coolant nozzles on vertical head - Chip tray with coolant tank and coolant pump - Work area lighting - Documentation available Required space (L x W x H): 2000 x 2000 x 2100 mm Weight: 1750 kg Good condition

Kondisi: bekas, Kepala penggerak alur, kepala penggerak untuk mesin frais DECKEL Tipe FP 1 Nomor Pabrik: 21948 Lebar ekor burung: sekitar 74 - 88 mm Tinggi ekor burung: sekitar 14,5 mm Panjang ekor burung: 285 mm Tepi depan ekor burung hingga tengah roda gigi: sekitar 200 mm Ukuran langkah: maks. 80 mm Jumlah langkah: maks. 475 langkah ganda/menit Lhsdpfsznn Hrex Al Nsi Pemasangan perkakas: persegi 4 sisi, 16 x 16 mm dengan pelat penjepit - Ukuran langkah dapat disesuaikan melalui pengaturan eksentrik - Penggerak dari roda gigi mesin, di dalam pemandu ekor burung (seperti pada kepala vertikal standar) - Kepala penggerak alur ini dipasang sebagai pengganti kepala frais vertikal standar ke dalam pemandu ekor burung (Pemasangan menggantikan kepala frais vertikal, kepala frais) - Roda gigi penggerak di dalam kepala penggerak alur, 39 gigi, lebar roda gigi 15 mm, kemungkinan sudut intervensi 15° - Kepala penggerak alur dapat diputar 360° pada pelat flensa, skala derajat +/- 35° - sedikit titik kerusakan pada rumah Berat: 28,5 kg DECKEL FP1 memiliki sudut intervensi 15° pada roda penggerak DECKEL FP2 + FP3 - memiliki sudut intervensi 20° pada roda penggerak