Beli Kraussmaffei Km 50-160 C2 bekas (47.072)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Mesin injeksi Krauss Maffei KM 800-5000 MC Tahun produksi: 2001 Perlengkapan: robot Rincian teknis: Gaya penutup: 8.000 kN Gaya maksimum pembukaan cetakan: 356 kN Gaya dorong pelat bergerak (pembukaan): 98 kN Gaya pelat bergerak (penutupan): 92 kN Ukuran pelat (lebar × tinggi): 1.610 × 1.530 mm Jarak antar kolom (lebar × tinggi): 1.120 × 1.000 mm Langkah pembukaan cetakan: 1.400 mm Podszd Ta Nopfx An Iora Tinggi cetakan minimum: 600 mm Bukaan maksimum: 2.000 mm Langkah ejektor hidrolik: 250 mm Diameter sekrup: 90 mm Rasio L/D: 23 Tekanan injeksi: 1.742 bar Volume injeksi: 2.863 cm³ Berat injeksi (PS): 2.605 g Data umum mesin Dimensi (p × l × t): 10.500 × 2.860 × 2.890 mm Berat: 43.000 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Perlengkapan: dokumentasi / manual, KraussMaffei KM650-4300 GX Machine Clamping force (kN): 6500 Distance between tie bars (h x v) (mm): 1110 x 960 Mold opening stroke (mm): 1450 Min. mold height (mm): 450 Max. mold height (mm): 1000 Ejector stroke (mm): 250 Screw diameter (mm): 90 (HPS-M mixing) L/D ratio: 20 Injection pressure (bar): 1839 Shot volume (cm³): 2290 Control version: MC5 Screen language: German Condition: Tested, fully operational Predpoy Apdqefx An Iea Features: - Anti-vibration leveling pads - BluePower - Servo pump drive for reduced energy consumption - Wear-resistant softener, surcharge - BluePower - Complete insulation of the plasticizing cylinder for lower energy consumption - 2 x pneumatic valve on moving platen for blow function - 2 x pneumatic valve on fixed platen for blow function - Pneumatic cascade control, 4-fold for hot runner - Hydraulic cascade control, 4-fold for hot runner - Conveyor belt control - Mechanical robot interface according to EUROMAP 18 - Hydraulically actuated ejector plate including threaded holes and through holes in the moving platen for ejector pins - Hydraulic core pull system, 2-fold on moving platen - Hydraulic core pull system, 2-fold on fixed platen - Pneumatic core pull system, single on moving platen - Pneumatic core pull system, single on fixed platen - Pressure relief for hydraulic core pulls - Pressure relief for hydraulic cascade valves - 20 hot runner control circuits - Socket combination (3 sockets, single-phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) - Volt-free contact for "Plasticizing" signal at HAN 3 A socket - Switch-over to holding pressure depending on mold cavity pressure (Kistler) - Quality statistics - Chip card reader - Diagram display and analysis package with 10 diagrams - Trend graphics - PV regulation - Production data interface consisting of 5 potential-free contacts in the control cabinet - 3 freely programmable inputs and outputs in the control cabinet KraussMaffei LRX 350 Linear Robot: - Fully integrated control system - Horizontal stroke: 4000 mm - Vertical stroke (telescopic): 2000 mm - Demolding stroke: 1200 mm - Maximum payload: 35 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Stock No. 13602 Manufacturer: Krauss Maffei Machine type: KM 650 – 8000 CM Year of manufacture: 1997 Operating hours: 80,000 h Control system: MC 3-F Screen language: German Location: D-52249 Eschweiler Clamping unit: Clamping force: 6,500 kN Maximum mold opening force: 346 kN Platen opening force (moving platen): 169 kN Platen closing force (moving platen): 144 kN Clamping plate size (H x V): 1,704 x 1,700 mm Clearance between tie-bars (H x V): 930 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 600 mm Daylight opening: 1,750 mm Ejector stroke: 250 mm Ejector force forward/back: 226 kN Injection unit: Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Shot volume: 6,172 ccm Shot weight (PS): 5,617 g Plasticizing rate: 1,540 ccm/s Screw speed: 138 rpm Plasticizing output: 238 g/s Nozzle contact force: 246 kN Electrohydraulic equipment: Predpfx Ajub S R Hon Iea Nominal pump motor power: 132 kW Installed heating power: 70 kW Number of heating zones (barrel): 7 Dimensions and weights: Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg Accessories: - Oscillation elements Additional equipment: - 1 x air valve - 2 x hydraulic core pulls on fixed platen - 2 x hydraulic core pulls on moving platen - 8 x hot runner control zones - Robot interface according to Euromap 67

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 8.500 kN, diameter sekrup: 135 mm, jarak antara tiang: 1.140 mm, lintasan ejektor: 300 mm, TECHNICAL DETAILS Clamping force: 8,500 kN Mold opening force: 560 kN Platen dimensions (h x v): 1,600 mm x 1,600 mm Tie bar spacing (h x v): 1,140 mm x 1,140 mm Maximum daylight opening: 1,600 mm Mold height (min-max): 500 mm – 1,100 mm Maximum opening stroke: 2,100 mm Ejector stroke: 300 mm Prjdpfx Ajy T Hmkon Isa Ejector force: 200 kN / 100 kN Screw diameter: 135 mm Injection pressure: 1,389 bar Injection volume: 8,588 cm³ Shot weight for PS: 6,098 g Injection rate: 1,414 cm³/s MACHINE DETAILS Electro-hydraulic equipment Pump motor rated power: 132 kW Dry cycle time according to Euromap 6: 965 1/h Hydraulic tank capacity: 2,440 l Open nozzle with nozzle radius: 25 mm Nozzle opening: 9 mm Dimensions & Weight Installation space (L x W x H): 11.72 m x 2.92 m x 2.71 m Net weight with control unit: 49 t EQUIPMENT Krauss Maffei robot LRX 500 MC 5 control system with color monitor Integrated control panel and USB data storage Complete plasticizing unit for thermoplastics Non-return valve

Kondisi: bekas, Tahun pembuatan: 2013, jam operasional: 29.000 h, gaya penjepit: 50 kN, volume langkah: 59 cm³, tekanan injeksi: 2.500 batang, berat keseluruhan: 3.700 kg, diameter konveyor sekrup: 25 mm, Freight basis: ex works Delivery time: by arrangement Terms of payment: 100% prior to machine collection, strictly net Manufacturer: Krauss Maffei Model: KM50-180AX Condition: from ongoing production Operating hours: approx. 26,000 CLAMPING UNIT: Clamping force: 50 t Opening stroke: 300 mm Min. mould installation height: 150 mm Max. mould installation height: 470 mm Prsdpfsppigdox An Ija Tie bar distance (h x v): 410 x 360 mm Platen dimensions (h x v): 510 x 460 mm Centering diameter (nozzle/ejector plate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Shot weight in polystyrene: 54 g Stroke volume: 59 cm³ Injection pressure: 2,500 bar CONTROL: MC5 Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: 2 x (hydraulic core pull unit) Air valves: 2 Hot runner zones: 6 Robot interface: Euromap 67 Other equipment: Quality monitoring package GENERAL DATA: Installed heating capacity: 8.1 kW Pump drive power: not applicable Total connected load: motor + heating Total weight: 3,700 kg Overall dimensions (L x W x H): 4.4 x 1.6 x 1.9 m

Kondisi: baik (bekas), Tahun pembuatan: 2011, Krauss Maffei KM 850-12000 MX Injection Moulding Machine With Krauss Maffei Robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV – Injection unit regulation. MC 5 control system with colour monitor, integrated control panel and USB data carrier. Plasticising unit Complete plasticising system for thermoplastics with a 135 mm screw diameter, non-return valve, and open nozzle Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8,500 kN - Mold opening force: 560 kN - Platen dimensions (H x V): 1600 x 1600 mm - Tie bar spacing (H x V): 1140 x 1140 mm - Mold opening stroke: 1,600 mm - Mold height (min - max): 500 – 1,100 mm - Daylight opening: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200/100 kN Injection unit - Screw diameter: 135 mm Prsdpfxstrya Re An Ioa - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Shot weight for PS: 6,098 g - Injection rate: 1,414 cm³/s Electro-hydraulic equipment - Pump motor rated power: 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2,440 l Weight and dimensions - Net weight with control cabinet: 49 t - Installation footprint (L x W x H): 11.72 x 2.92 x 2.71 m

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036721, gaya penjepit: 6.500 kN, diameter sekrup: 70 mm, jarak antara tiang: 1.110 mm, volume langkah: 1.078 cm³, tekanan injeksi: 1.877 batang, berat injeksi: 981 g, langkah pembukaan: 3.200 mm, tinggi pelat: 1.540 mm, jenis penggerak: Hydraulisch, bentang bebas: 3.200 mm, berat alat: 2.200.000 g, Injection molding machines directly from the manufacturer! As KraussMaffei, the manufacturer, we are pleased to offer you our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW series sets new benchmarks in quality and productivity. The sophisticated GuideX slide shoe ensures optimal absorption of force, increasing tooling lifetime. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT color screen, multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Maximum mold opening force kN 455 - Daylight (H x V) mm 1110 x 960 - Mounting platen (H x V) mm 1540 x 1440 - Mold height (min. - max.) mm 1550 (without center platen) - Maximum opening stroke mm 3200 - Maximum mold open distance mm 1650 - Maximum mold weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter / type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight (max. stroke, PS) g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter / type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight (max. stroke, PS) g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL PARAMETERS - Connected load kW 341 - Power supply V / Hz 400 / 50 3-phase with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit Prodpew U N Ixofx An Iea - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mold heating 96-fold (3.5 kW each) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphics analysis package - Sliding table with servo-driven turning unit - Vertical center platen - Parallel clamping and opening movements during injection, with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface: signal interface for connection of an RPM system - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for “1-K Dummy Operation” - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered upon request. We look forward to your inquiry.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Injection Moulding Machine Krauss Maffei KM 250-1900 C1 Year of manufacture: 2007 ✅ General Information Manufacturer: Krauss Maffei Model: KM 250-1900 C1 Year of manufacture: 2007 Clamping system: fully hydraulic Control system: MC4 with colour monitor, control panel, and floppy disk drive 🔹 Clamping Unit Clamping force: 2500 kN Opening force: 160 kN Platen movement force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1050 mm Tie bar spacing: 630 x 630 mm Mould opening stroke: 820 mm Mould installation height: 330 mm Max opening width: 1150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN 🔹 Injection Unit Screw diameter: 70 mm Injection pressure: 1778 bar Shot volume: 1047 cm³ Predpfx Asxak Ucon Ioa Shot weight (PS): 953 g Screw speed: 218/306 rpm Injection rate: 400 cm³/s Output (PS): 75 g/s (standard), 105 g/s (high speed) 🔹 Electro-hydraulic Equipment Pump motor power: 55 kW Cylinder heaters: 30 kW (6 zones) Dry cycles according to Euromap: 1400 1/h Oil tank: 720 l 🔹 Dimensions and Weight Net weight (including control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 25.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 8.500 kN, diameter sekrup: 95 mm, volume langkah: 3.367 cm³, Clamping force: 8,500 kN Maximum tool opening force: 560 kN Moving platen travel force (open): 153 kN Moving platen travel force (close): 117 kN Mounting plate (H x V): 1600 x 1600 mm Clear distance (H x V): 1140 x 1140 mm Mold opening stroke: 1600 mm Mold installation height min./max.: 500 / 1100 mm Maximum opening width: 2100 mm Ejector stroke: 300 mm Ejector force forward/backward: 200 / 100 kN Psdeyb Sx Hopfx An Isra Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1795 bar Stroke volume: 3367 ccm Shot weight (PS): 3064 g Injection rate: 690 ccm/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated pump motor output: 90 kW Installed heating capacity: 53 kW Cylinder heater control zones: 7 Oil capacity: 1500 l Dimensions and weights: Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 43,000 kg Max. mold weight: 12,200 kg Accessories: - Oscillation elements Additional equipment: - 1 x air valve - 4 x hydraulic core pulls - 12 x hydraulic cascades - 2 x 12-fold water manifold - Robot interface according to Euromap 67

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, KM 500-3500 C2 Tahun pembuatan: 2007 Jam operasional dalam mode otomatis: 60.000 jam Unit Penutup Gaya penjepitan: 5.000 kN Ukuran plat pemasangan: 1.270 x 1.310 mm Jarak antar tiang: 900 x 800 mm Predpfxszgwa Es An Ioa Tinggi cetakan minimum/maksimum: min 480 mm Lebar bukaan maksimal: 1.650 mm Unit Injeksi Diameter sekrup: 80 mm Volume injeksi: 1.543 cm³ Berat injeksi: 1.404 g Tekanan injeksi: 2.205 bar Peralatan Listrik dan Hidrolik Daya nominal motor pompa: 90 kW Daya pemanas: 44 kW Dimensi dan berat Berat bersih dengan panel kontrol: 27.090 kg Dimensi (P x L x T): 7,65 m x 2,55 m x 2,55 m

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), Clamping force: 2,500 kN, clear tie bar spacing: 630 mm/630 mm, opening stroke: 1,150 mm, minimum mould installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2,000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control system: MC4. Machine dimensions: 5,700 mm / 2,200 mm / 2,300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8x hot runner controllers, 4x core pulls, blow-out unit, accumulator, hydraulic tie bar withdrawal unit, energy-saving circuit, ALS interface, 20mA interface, and color dosing unit interface. On-site inspection possible, documentation available. Pjdpfx Aeuiykdsn Iora

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 69.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.250 kN, diameter sekrup: 45 mm, Dijual mesin injeksi merek KraussMaffei tipe KM 125-700C2. Mesin dalam kondisi fungsional penuh dan masih beroperasi hingga akhir-akhir ini. Data teknis: Tahun pembuatan: 2000 Jam operasional: 69.000 jam Gaya penutup: 125 t Diameter silinder: 45 mm Pedsx Ituqjpfx An Iora Katup jarum: Pneumatik Penarik inti: 2x hidrolik Sensor tekanan internal

Kondisi: baik (bekas), Tahun pembuatan: 2013, gaya penjepit: 16.000 kN, Perlengkapan: dokumentasi / manual, machine_spec_001 Predpfx Anoyh I Emj Isa

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Mesin Injeksi KRAUSS-MAFFEI KM 900-8100 GX Tahun pembuatan: 2015 Gaya penguncian: 9000 kN / 900 t Pengendali: MC6 Sistem penguncian: hidraulik-mekanis, dua pelat Unit injeksi: 8100 Konstruksi dan pengendalian Sistem penguncian hidraulik-mekanis dua pelat dengan 4 bantalan tekanan pada pelat tetap dan 4 set penyetel pada pelat bergerak. PV – pengaturan unit injeksi. Sistem pengendalian MC6, berbasis komputer industri dengan teknologi Ethernet waktu nyata, dilengkapi dengan panel kontrol terintegrasi 19 inci dengan layar sentuh berwarna, lampu latar LED, dan visualisasi proses ProcessDesigner. Sistem plastifikasi Sistem plastifikasi lengkap untuk termoplast, dengan lapisan pelindung abrasif. Diameter sekrup: 105 mm Katup balik: ya Nozel: terbuka Unit penguncian Gaya penguncian cetakan: 9000 kN / 900 t Gaya pembukaan cetakan – bantalan tekanan: 630 kN Dimensi pelat pemasangan (T × L): 1660 × 1530 mm Jarak antar kolom (T × L): 1180 × 1000 mm Jarak pembukaan cetakan maksimum: 1600 mm Tinggi cetakan min./maks.: 500–1100 mm Jarak maksimum antar pelat: 2100 mm Langkah ejektor: 300 mm Gaya ejektor depan / belakang: 140 / 70 kN Unit injeksi 8100 Diameter sekrup: 105 mm Rasio Ls/D: 23:1 Tekanan injeksi maksimum: 1778 bar Volume injeksi: 4546 cm³ Prjdpszvm T Tofx An Ioa Berat injeksi untuk PS: 3228 g Kapasitas injeksi: 805 cm³/s Kecepatan rotasi sekrup: 150 rpm Gaya penekanan nozel: 166 kN Peralatan elektro-hidraulik Daya terukur motor pompa: 120 kW Daya terpasang pemanas: 59 kW Jumlah zona pemanas silinder: 7 Waktu siklus kering / langkah menurut EUROMAP 6: 3,3 s / 826 mm Waktu siklus kering / langkah menurut standar KraussMaffei: 2,9 s / 590 mm Kapasitas tangki oli: 1450 l Dimensi dan berat Dimensi mesin (P × L × T): 10,72 × 3,03 × 2,51 m Berat bersih dengan lemari kontrol: 40 t

Kondisi: bekas, Tahun pembuatan: 2010, Injection moulding machine Krauss Maffei KM 650-4300, year 2010 Prodpfxew Hwthe An Iea

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Mesin Injeksi KRAUSS-MAFFEI KM 900-8100 GX Tahun Pembuatan: 2018 Sistem Kontrol: MC6 Sistem Penutup Cetakan: Hidraulik-mekanis, dua pelat Unit Injeksi: 8100 Konstruksi dan Sistem Kontrol Sistem penutup cetakan hidraulik-mekanis dua pelat dengan 4 bantalan tekanan pada pelat tetap dan 4 unit penyetel pada pelat bergerak. PV – pengaturan unit injeksi. Sistem kontrol MC6, berbasis komputer industri yang beroperasi dengan teknologi Ethernet waktu nyata. Konsol kontrol terintegrasi 19 inci dengan layar sentuh berwarna, lampu latar LED, dan visualisasi semua proses yang sedang berjalan menggunakan ProcessDesigner. Sistem Plastikasi Sistem plastikasi lengkap untuk termoplastik dengan lapisan pelindung abrasi. Diameter sekrup: 105 mm Katup balik: ya Nozel: terbuka Radius nozel: 25 mm Diameter lubang nozel: 9 mm Unit Penutup Cetakan Gaya penjepitan cetakan: 9000 kN / 900 t Gaya pembukaan cetakan: 630 kN Dimensi pelat pemasangan (T × L): 1660 × 1530 mm Jarak antar kolom (T × L): 1180 × 1000 mm Jarak maksimum standar / lebar pembukaan: 2100 mm Langkah ejektor: 300 mm Gaya ejektor depan / belakang: 140 / 70 kN Unit Injeksi 8100 Diameter sekrup: 105 mm Rasio Ls/D: 23:1 Tekanan injeksi maksimum: 1778 bar Volume injeksi: 4546 cm³ Berat injeksi: 3228 g* Kecepatan injeksi: 90 mm/s Kapasitas injeksi: 779 cm³/s Kecepatan putar sekrup standar: 150 rpm Kapasitas plastikasi pada putaran standar: 135 g/s* Gaya penjepit nozel: 166 kN * sesuai dengan spesifikasi yang diberikan oleh produsen / material referensi yang digunakan. Peralatan Elektro-Hidraulik Daya terukur motor pompa: 120 kW Daya terpasang pemanas: 59 kW Jumlah zona pemanas silinder: 7 Waktu siklus kering / langkah menurut EUROMAP 6: 3,3 s / 826 mm Waktu siklus kering / langkah menurut standar KraussMaffei: 2,9 s / 590 mm Jumlah minyak hidrolik yang dibutuhkan: 1450 l Dimensi dan Berat Dimensi mesin (P × L × T): 10,72 × 3,03 × 2,51 m Pjdpfxozvm E As An Ijra Berat bersih termasuk lemari kontrol: 40,0 t

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 9.500 kN, diameter sekrup: 120 mm, lintasan ejektor: 300 mm, langkah pembukaan: 1.900 mm, DETAIL TEKNIS Gaya penutup: 9.500 kN Gaya buka: 665 kN Jarak antar pilar: 1.400 x 1.150 mm Pelat penjepit: 1.960 x 1.710 mm Pjdoy T H A Eepfx An Iera Stroke pembukaan: 1.900 mm Tinggi cetakan minimum: 500 mm Tinggi cetakan maksimum: 1.200 mm Lebar pembukaan maksimum: 2.400 mm Stroke ejector: 300 mm Sekrup berkapasitas tinggi HPS-UN, diameter: 120 mm Radius nosel: 30 mm Bukaan nosel: 12 mm Diameter sekrup: 120 mm Berat tembakan (HDPE): 5.420 g Volume tembakan: 7.634 cm³ Tekanan injeksi spesifik: 2.257 bar DETAIL MESIN Dimensi & Berat Dimensi (P x L x T): 12.770 x 3.420 x 2.750 mm Berat mesin: 61,5 t

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), 2079916 Pedsxx Uf Aopfx An Ijra

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 47.137 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61020607, gaya penjepit: 1.300 kN, jarak antara tiang: 470 mm, Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current update – Tax notice and benefit for used machinery: As of July 1, 2025, used machines may also benefit from a special depreciation allowance of 30% per year for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation rates as for new equipment. Keyword: Growth booster (Section 7 (2) EStG-E) Manufacturer: Krauss Maffei Type: KM 130 750-130 CXV BluePower, 2-color, 2-component machine Control: MC6 Year: 2014 Machine No.: 61020507 Operating hours: 47,137 h Complete service record for the past 7 years / 25,000 h of operation 1st injection unit 750 horizontal Injection unit/screw: 50 mm Shot volume: 393 cm³ Prjdpjyf Uy Uofx An Ioa Shot weight: 357 g Heating power: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1892 bar 2nd injection unit 180 vertical Injection unit/screw: 30 mm Shot volume: 85 cm³ Shot weight: 77 g Injection pressure: 2500 bar Clamping unit Clamping force: 130 t / 1300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Platen size: 745 x 770 mm Max. platen spacing: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – Full machine data sheet attached as PDF Nozzle side: needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blow-off Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blow-off Water circuit BGS: 6 zones each on nozzle and ejector side BluePower technology – up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripherals shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck, or free delivery to location against reimbursement of freight costs. Information about the company and our machines: - We only sell machines purchased from running production, stored at our warehouse in Hanover - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing with third-party property. - All offered machines come from successful companies where maintenance and care are standard practice - All available machines can be viewed in our warehouse.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036936, gaya penjepit: 800 kN, diameter sekrup: 35 mm, volume langkah: 135 cm³, tekanan injeksi: 1.837 batang, berat injeksi: 123 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.820 mm, berat keseluruhan: 5.900 kg, kapasitas pemanasan: 8,9 kW (12,10 hp), jenis penggerak: Vollelektrisch, bentang bebas: 470 mm, berat alat: 600.000 g, Plastics injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines: The precisionMolding base injection moulding machine provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. The machine can be utilised in a wide range of applications, such as packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits: – Optimised cost-performance ratio for a broad spectrum of applications – High energy efficiency through an all-electric machine concept – Fast lead times thanks to the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.: 61036936, new, YOM 2023) CONTROL SYSTEM  MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT  Clamping force kN 800  Max. mould opening force kN 120  Daylight (h x v) mm 470 x 420  Platen size (h x v) mm 610 x 560  Mould installation height min.-max. mm 150 - 400  Max. opening stroke mm 750  Max. mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force fwd/rev kN 22 / 22  Ejector speed fwd/rev mm/s 300 / 300  Max. mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 35 / standard  Effective L/D ratio 20.0  Injection pressure bar 1837  Shot volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow cm³/s 192  Screw drive / speed rpm 382  Plasticizing rate (standard screw) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heating power kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral WEIGHT AND DIMENSIONS Podpfx Aneuggb Do Isra  Net weight with control cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Wear-resistant plasticizing system  BluePower full insulation for plasticizing cylinder  Open nozzle  1-fold air valve (BWAP)  1-fold pneumatic control for hot runner shut-off  4-fold electric interface for cascade control  Electrical pre-installation for hydraulic auxiliary unit  Euromap interface for handling E18, E63  Euromap interface (host computer) E67, E77  4-fold water manifold  Automatic central lubrication  Adaptive Process Control (APC)  Injection compression moulding switch  Graphic analysis package  Swing-out injection unit The machine is located at our plant in Parsdorf and is available at short notice. Additional optional features can be offered on request. We look forward to your enquiry.

Kondisi: baik (bekas), Tahun pembuatan: 2002, 1 unit used injection moulding machine Manufacturer: KRAUSS MAFFEI Type: KM575-1900C2 Year of manufacture: 2002 Clamping force: 575 tons Tie bar distance: 1000 x 1097 mm Screw diameter: 70 mm Max. stroke volume: 1,097 cm³ Shot weight: 998 g/PS Control: MC4 Equipment: 5 core pulls Robot, manufacturer: Reis, year: 2015 24-fold hot runner control Conveyor belt Pjdpfjyak Htox An Isra Safety fence

Kondisi: siap digunakan (bekas), Mesin cetak injeksi ini merupakan bagian dari seri mesin dua pelat hidromekanik, dengan gaya penguncian 550 ton, jumlah jam operasional sekitar 80 jam, dilengkapi dengan sistem penanganan Krauss Maffei KM 250/LRX-S 250. Pemeriksaan langsung di lokasi dimungkinkan, mesin tersebut berada di Meksiko. Podpozrn Hmofx An Iera

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 70.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 6.500 kN, diameter sekrup: 95 mm, volume langkah: 3.367 cm³, Clamping force: 6500 kN Max. mold opening force: 346 kN Movable platen opening force: 169 kN Movable platen closing force: 144 kN Clamping platen (H x V): 1520 x 1470 mm Clear width between tie bars (H x V): 1000 x 930 mm Mold opening stroke: 1150 mm Minimum mold installation height: 600 mm Max. daylight: 1750 mm Ejector stroke: 250 mm Ejector force forward/back: 95 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1795 bar Shot volume: 3367 ccm Shot weight (PS): 3064 g Injection flow rate: 690 ccm/s Screw speed: 153 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated drive power, pump motor: 90 kW Installed heating capacity: 50 kW Heater zones, barrel: 7 Dimensions and weight: Space requirement approx.: 9.83 x 2.90 x 2.80 m Total weight: 43,170 kg Prsdpfx Ansx Hzzco Iea Accessories: - Anti-vibration elements - Krauss Maffei Robot LR300 X: 1200 mm, servo motor driven Y: 1000/1000 mm, telescopic, servo motor driven Z: 3500 mm, servo motor driven C: 0 - 90°, pneumatic - Conveyor belt - Safety enclosure Additional equipment: - 1 x air valve - 6-fold pneumatic cascade control - 12 x hot runner zones - 2 x hydraulic core pulls on moving platen - 2 x hydraulic core pulls on fixed platen

Kondisi: baru, Tahun pembuatan: 2025, 1 Psdpfxjy Umpue An Ijra

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 60.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 9.500 kN, diameter sekrup: 105 mm, jarak antara tiang: 1.400 mm, volume langkah: 4.546 cm³, tekanan injeksi: 1.778 batang, berat injeksi: 4.137 g, injection_molding_machine_specs Pjdpfjx Hz I Nsx An Iera