Beli Imperial Smd016 bekas (115)

Kondisi: bekas, Tahun pembuatan: 1975, Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 260 mm Turning length: 950 mm Centre height (measured in bed): 220 mm Distance between centres: 1000 mm Spindle speeds: 11.2 – 2240 rpm, 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 – 1.6 mm/rev, 32 steps Cross feeds: 0.02 – 0.71 mm/rev, 32 steps Total power requirement: 11 kW Approx. machine weight: n/a t Machine dimensions (LxWxH): approx. 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle operation), available free of charge in Leipzig. Top slide swivels 360° 3-jaw chuck Ø 315 mm with internal/external jaws, rated for 2000 rpm Thread cutting: metric, module, imperial threads Chip guard Chuck guard (mechanical) Laedpfx Afsv A Sqhoiea MULTIFIX tool post with Ø 40 mm boring bar holder Chip tray Coolant supply with pump Leadscrew protection device Machine feet UVV safety preparation complete

Kondisi: baik (bekas), Mesin bubut spindle L&Z WEILER COMMODOR B dari institusi pendidikan -Penanda GS -Display digital 3-sumbu "BARU" -Tinggi center 180 mm -Jarak antara centernya 1000 mm Laedpfjyf U E Dox Afija -Diameter spindle 56 mm -Kecepatan spindle 15 - 2000 rpm -Sumbu otomatis memanjang & melintang -Untuk ulir / metrik / inci / modul / pitch diameter -Perlindungan chuck elektrik -2x Emergency Stop -Multifix dengan sisipan -Cekam empat rahang - Röhm -Dinding penahan serpihan -Unit pendingin -Kondisi original sangat terawat -Dokumentasi Dimensi: PxLxT 2,3x1,2x1,7 meter / Berat 1600 kg Kesalahan penulisan/tampilan dapat terjadi

Kondisi: baru, Tahun pembuatan: 2026, OPTIturn TU 2004V – Lathe with Infinitely Variable Speed Control and Digital Speed Display Illustration shows OPTIturn TU 2004V Lathe with infinitely variable speed control and digital speed display Precision Manufacturing Strongly ribbed, prism bed made of cast steel, induction-hardened and precision ground Hardened and ground bed guideways Hardened spindle nose (DIN 6350) Guaranteed spindle nose concentricity better than 0.009 mm Automatic longitudinal/lead screw feed With longitudinal, cross, and compound slides Forward-reverse switching via control panel Emergency stop slam switch Chuck guard Thrust bearing Lead screw supported in two sintered bearings Wide thread cutting range via change gear set Easy and quick speed change via V-belt Change gear transmission EMC filter class B (for use in private households) Equipment details: Digital speed display Clearly legible digital speed screen Chip guard on compound slide Four-way tool post rotatable Roll-threaded trapezoidal lead screw Lead screw Tailstock Adjustable for taper turning Tailstock quill and handwheel with adjustable fine graduation 0.02 mm Main spindle Hardened and mounted in adjustable precision taper roller bearings Taper roller bearings in P5 quality Cylindrical centering mount Hardened spindle nose with 21 mm spindle bore Lathe chuck Concentricity better than 0.04 mm Scope of delivery: 3-jaw chuck Ø 100 mm, self-centering Fixed center MK 2 Fixed center MK 3 Splash guard Ljdpfx Afjcnxrceisaa Chip tray 4-way tool post Change gear set Operating tools Model: OPTIturn TU 2004V Article No.: 3420310 Technical Data Electrical connection: 230 V / 1 Ph ~50 Hz Drive motor power, spindle: 600 W Spindle taper: MK 3 Spindle bore: 21 mm 3-jaw chuck through hole: 20 mm Tool post installation height: max. 12 mm Centre height: 100 mm Centre distance: 300 mm Max. turning diameter: 200 mm Swing over cross slide diameter: 110 mm Bed width: 100 mm Spindle speed: 150 – 2,500 rpm Speed steps: 2 steps, speed electronically adjustable Compound slide travel: 55 mm Cross slide travel: 75 mm Longitudinal feed range: 0.1 / 0.2 mm/rev Pitch – metric: 0.25 – 3 mm/rev (14 pitches) Pitch – imperial: 44 – 8 TPI (12 pitches) Tailstock taper: MK 2 Tailstock quill travel: 65 mm Dimensions (L x W x H): 830 x 425 x 360 mm Net weight: 61 kg

Kondisi: baru, Condition: new Delivery time: approx. 4 months from order Country of origin: Bulgaria Price: €82,740 Leasing rate: €1,563.79 Swing over bed: 860 mm Centre distance: 3000 mm Centre height: 430 mm Spindle bore: 132 mm Swing over cross-slide: 620 mm Bed width: 560 mm Spindle mount / DIN 55027: Size 11 Spindle taper: 140 M Number of spindle speeds: 17 Spindle speed: 7.5 – 1,015 rpm Number of feeds: 150 Longitudinal feed: 0.039 – mm/rev Cross feed: 0.02 – 9 mm/rev Metric thread range: 0.5 – 0 mm Imperial thread range: 60 – 1/6 TPI Module thread range: DP thread range: 240 – 2/3 Cross-slide travel: 435 mm Top slide travel: 150 mm Tailstock quill diameter: 105 mm Tailstock taper: 6 MT Tailstock quill travel: 225 mm Motor power: 15 kW Length: 3,470 mm Width: 1,700 mm Height: 1,730 mm Weight: 4,650 kg Drive via gearbox 3-axis digital display Fagor Quick-change toolpost Amestra, Multifix-style system including 4 holders (3 rectangular, 1 round) 3-jaw chuck Bison 3295/DIN 6350, 400 mm Fixed centre Rapid traverses (4) Foot brake Longitudinal stop for one position Coolant system Full-length rear chip guard Leadscrew and feed shaft cover Chuck guard Toolholder guard Levelling bolts and plates Tailstock with quick clamping Reducing sleeve for tailstock quill Mechanical movement of tailstock Low-voltage machine light Operating manual Laodpowiq Rxjfx Afiea Equipment as per "CE" standard OTHER TURNING LENGTHS: Turning length 1,500 mm €68,870.00 Turning length 2,000 mm €71,780.00 Turning length 4,000 mm €88,640.00 Turning length 5,000 mm €101,200.00 Turning length 6,000 mm €114,800.00

Kondisi: baru, Condition: new Country of origin: Bulgaria Price: €115,600 Leasing rate: €2,184.84 Swing diameter over bed: 1,090 mm Distance between centers: 3,000 mm Center height: 500 mm Spindle bore: 155 mm Swing diameter over cross slide: 690 mm Bed width: 700 mm Spindle mount / DIN55027: 15 Spindle taper: 160 M Number of spindle speeds: 24 Number of feeds: 160 Longitudinal feed: 0.032 – 38.9 mm/rev Cross feed: 0.016 – 19.45 mm/rev Metric thread range: 0.5 – 480 mm Imperial thread range: 60 – 1/16 TPI Module thread range: Cross slide travel: 525 mm Top slide travel: 270 mm Tailstock quill diameter: 125 mm Tailstock taper: 6 MT Tailstock quill stroke: 260 mm Motor power: 22 kW Weight: 7,500 kg Drive via geared transmission 3-axis digital readout Fagor Quick-change toolpost Amestra, system similar to Multifix including 4 holders (3x square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm Fixed centre Coolant system Rear chip guard over the entire length Leadscrew and feedshaft cover Chuck guard Tool holder guard Levelling bolts and plates Reducing sleeve for tailstock quill Tailstock movement via electric motor Low-voltage machine lamp Operating manual Equipment according to CE regulations ADDITIONAL TURNING LENGTHS: Turning length 1,500 mm €101,220.00 Turning length 2,000 mm €104,720.00 Turning length 4,000 mm €123,610.00 Turning length 5,000 mm €134,700.00 Ljdpfx Afowiqv Usisaa Turning length 6,000 mm €151,230.00

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Ref: 11047 . 2016 EBA 721-06 LT Guillotine 2016 EBA 721-06 LT Pile Guillotine, 72 cm, Automatic Guillotine Cutter Equipment: - Electromechanical blade drive - Hydraulic clamping drive - Infinitely adjustable clamping pressure (250–2,000 kg) with optical indicators - Snap-in false clamp plate with optical indicator - Spindle-guided electromechanical backgauge drive for precise positioning - Air table on the front and rear tables - Foot pedal for pre-clamping or cutting-line indicator - Optical cutting-line indicator with LEDs - Durable stainless steel work surface on front table - HSS steel knives - Swing cut for increased cutting precision - Adjustable solid steel knife carrier, guided on both sides - Adjustable blade depth - Stainless steel side tables (left and right) - Electrically monitored front table area with photocell safety curtain - Transparent safety guard at the rear table - Two-hand safety control with repeat cut lockout and synchronous control - Automatic return of blade and clamp from any position - Main switch, safety lock, and key - Blade changing tool with covered cutting edge - Knocking-up device Features: - 99 programs, each with up to 99 steps - Up to 9 repeat measurements programmable per program step - Automatic program run with electronic cutting monitor - 10-key control pad for presetting measurements - 3 memory keys for custom measurements - Electronic digital display with 0.1 mm precision - ‘Set Function’ button for reference measurement - Electronic hand wheel with infinitely variable speed for fine backgauge adjustment - Button controls for rapid backgauge movement (forward/reverse) - Automatic measuring correction in case of backgauge displacement - Memory key for repeat cuts (manual), additional automatic memory - Paper ejection function with or without program mode (advance programmable) - Delete/insert mode for program correction/modification - Integrated calculator - Self-diagnosis system with error display - Metric/Imperial switching Technical Data: - Cutting width: 720 mm - Cutting height: 80 mm – 781 mm - Insertion depth: 720 mm - Front table depth: 530 mm - Minimum cut: 20 mm – 901 mm Lasdpfx Afex Nfr Rsisa - Backgauge speed: 53 mm/s - Dimensions (W x D x H): 1305 x 1500 x 1335 mm Please note: All details are provided without guarantee. Subject to prior sale.

Kondisi: baru, Tahun pembuatan: 2026, Industrial metal lathe CORMAK 460x1000 – robust cast iron bed construction, fitted with a 12-speed gearbox and a powerful 5.5 kW/400V induction motor for maximum torque, with a large spindle bore of 80 mm. Recommended for machining hardened steels and mechanical turning. Suitable for a wide range of operations including internal and external turning, conical turning, polishing, metric and imperial threading, drilling, and broaching. Supplied with cutting tools and a live center as standard. Technical specifications: - 3-jaw chuck: 250 mm - Maximum swing over bed: 460 mm - Swing over cross slide: 260 mm - Swing in gap: 690 mm - Distance between centers: 1000 mm - Maximum installed workpiece length (chuck/live center): 900 mm - Bed width: 300 mm - Spindle bore: 80 mm - Spindle speeds: 12 ranges (25 - 1700 rpm) - Speed steps: 25, 40, 55, 75, 115, 170, 250, 375, 560, 750, 1100, 1700 rpm Laodpfsrh E Trox Afisa - Spindle nose: D1-8 CAMLOCK - Spindle taper: MT7 - Tool post dimensions: 110 x 110 x 42 mm - Max. tool size: 25 x 25 mm - Top slide travel: 125 mm (0.02 mm gradation) - Cross slide travel: 295 mm (0.05 mm gradation) - Longitudinal travel: 750 mm (0.1 mm gradation) - Metric threads: (41) 0.1 - 14 mm - Imperial threads: (60) 2-112 TPI - Module threads: (34) 0.1-7 module pitch - DP threads: (50) 4-112 DP - Longitudinal feeds: (42) 0.031 - 1.7 mm/rev - Cross feeds: (42) 0.014 - 0.784 mm/rev - Rapid traverse: Yes - Tailstock quill stroke: 130 mm (0.02 mm gradation) - Tailstock quill diameter: 60 mm - Tailstock taper: MT4 - Main motor power S1/S6: 5.5/6.6 kW / 400V - Coolant pump power: 0.1 kW - Dimensions (L/W/H): 2200 mm x 1080 mm x 1650 mm - Net weight: 1655 kg (±2%)

Kondisi: baru, Tahun pembuatan: 2026, Professional universal metal lathe CORMAK 330x915 is equipped with a 12-speed gearbox and an induction motor (constant speed) 1.1 kW/400V, providing maximum torque. Recommended for machining hard steels and mechanical turning operations. The machine can be used for various tasks, such as internal and external turning, taper turning, polishing, metric and imperial threading, drilling, and broaching. Technical specifications: Maximum turning diameter over bed: 325 mm Maximum length of installed workpiece (between centers): 915 mm Maximum workpiece length (chuck/steady center): 830 mm Turning diameter over cross slide: 208 mm Bed width: 160 mm Spindle bore: 38 mm Spindle taper: MT5 Tool post dimensions: 78 x 78 x 20 mm Maximum tool size: 16x16 mm Compound slide travel: 100 mm Cross feed travel: 153 mm Longitudinal travel: 800 mm Spindle speeds: 12 steps (L/H) Spindle speed range: L: 65, 90, 120, 120, 160, 300 / H: 380, 500, 640, 850, 1100, 1650 rpm Longitudinal feed range: 0.087–2.218 mm/rev Cross feed range: 0.019–0.477 mm/rev Spindle nose: MT5 Metric threads: (16) 0.25–6 mm Imperial threads: (24) 4–120 T.P.I. Lsdpom Nb Srsfx Afioaa Tailstock quill diameter: 32 mm Tailstock quill taper: MT3 Tailstock quill travel: 75 mm Motor power: 1.1 kW / 400 V Coolant pump power: 0.1 kW Dimensions (with base): 1770x740x1600 mm Weight (with base): 390 kg Equipment included: - Set of 16x16 turning tools, 8 pcs (with brazed tips) - Precision revolving center MT3 - Lathe stand - 2-axis digital readout (optical scale) - 3-jaw lathe chuck 160 mm - Reversible jaws - Fixed center: MT3 - Change gears - Spindle reduction sleeve - Coolant system - Grease gun - Chuck and tool post wrench - Complete set of service tools - Safety guards meeting CE standards - User manual in Polish - CE declaration of conformity The listed price is NET. Price does not include transport costs. For further information, please contact us by phone or email. We invite you to visit our website for the full offer.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C, ex-technical school Technical Data: >> Year of manufacture: 1992 Machine no.: 92 160 3260 >> Centre height: 160 mm >> Distance between centres: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread cutting options: metric, imperial, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm Ljdjx Eb A Uopfx Afijaa >> Weight: approx. 680 kg >> Spindle brake selectable >> Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: >> 3-axis digital readout from K&C with operating manual Functions: mm/inch conversion, coordinate selection ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switch, >> Collet chuck with NEW collets from 3 to 26 mm in 1 mm increments >> 160 mm three-jaw chuck (with 1 set of jaws) >> Quick-change toolpost with 4 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Coolant system >> Operating manual, spare parts list About the machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe with toolroom accuracy, year 1992, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce ground-like finishes. You are welcome to inspect the machine under power on site and see its condition for yourself.

Kondisi: baik (bekas), Tahun pembuatan: 2004, jarak pergerakan sumbu X: 1.750 mm, jarak lintasan sumbu Y: 1.400 mm, jarak gerak sumbu Z: 600 mm, CNC Gantry Milling Machine FPT - STINGER MACH-ID 8829 Manufacturer: FPT Model: STINGER Control: Heidenhain iTNC530 Year of Manufacture: 2004 • Chip conveyor • Laser tool setter • Portable handwheel • Fully automatic A/B milling head • High-pressure coolant system Specifications Metric / Imperial X-axis travel: 1750 mm Y-axis travel: 1400 mm Z-axis travel: 600 mm Table length: 1200 mm Table width: 1000 mm Table load capacity: 5000 kg Feedrate X-axis: 35,000 mm/min Feedrate Y-axis: 35,000 mm/min Ljdeuni D Eopfx Afijaa Feedrate Z-axis: 35,000 mm/min Spindle taper: HSK 63 ISO/BT/MK Spindle power: 25 kW Spindle speed: 18,000 rpm Tool changer: 30 positions Through-spindle coolant (IKZ): 20 bar Number of controlled axes: 5 Chip conveyor: Yes Coolant system: Yes Approximate Dimensions Length: 6000 mm Width: 4000 mm Height: 3850 mm Weight: 21,000 kg Please note: The information on this page is provided to the best of our knowledge and, where possible, obtained from the manufacturer. All details are given in good faith, but accuracy cannot be guaranteed. They do not constitute representations or contractual terms. We recommend verifying all critical specifications.

Kondisi: baik (bekas), Tahun pembuatan: 1980, lebar di tengah: 2.350 mm, tinggi pusat: 1.200 mm, tinggi produk (maks.): 6 mm, Manufacturer: LEIFELD Model: PLB 1200 Year of manufacture: 1980 Specifications Metric | Imperial ----- Max. workpiece diameter over bed: 1200 mm Max. workpiece diameter in pit: 2260 mm Center height over bed: 600 mm Distance between centers: 2350 mm Length of the gap: 400 mm Max. sheet thickness: 6 mm X-axis stroke: 1200 mm Y-axis stroke: 300 mm Spindle speed: 6 – 675 rpm Power: 40 kW Tailstock quill travel: 750 mm Dimensions (approx.) Length: 4500 mm Width: 3200 mm Height: 2500 mm Laodpfx Aoq Dqdiofiea Weight: 10,200 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. As such, this information does not constitute representation or contractual terms. We recommend verifying all critical details independently.

Kondisi: baik (bekas), Tahun pembuatan: 1975, Penawaran 24204 Data teknis: - Diameter putar terbesar di atas tempat tidur: 420 mm - Jarak pusat: 1000 mm - Lubang spindle: mm - Kerucut dudukan pinol senter ekor: MK 4 - Panjang gerak pinol senter ekor: 200 mm - Kecepatan putar spindle: 40 – 2000 rpm - Feed memanjang & permukaan - Pitch ulir metrik - Ulir inci - Ulir modul - Daya: 400 V Ljdox Tqg Iopfx Afioaa - Dilengkapi dengan: • Chuck 3 rahang • Penahan baja SWS dengan 3 sisipan - Ruang yang dibutuhkan (kurang lebih): L 2800 x T 1250 x D 950 mm - Berat: sekitar 2200 kg

Kondisi: hampir baru (bekas), Myford 254s Mesin Bubut, Fase Tunggal 220v Kondisi sangat baik, hampir seperti baru, jarang digunakan Jarak antara pusat: 560 mm (22") Ayunan: 254 mm (10") Laedex Utymspfx Afija Mesin imperial Putaran spindle: 53-2000 rpm Taper Morse tailstock: no. 2 Steady rest tetap dan berjalan Chuck 4-jaw 152 mm (6") Chuck 3-jaw 127 mm (5") Pelat muka 280 mm (11") Fase tunggal 230v

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 Laodeu Aftgspfx Afiea >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 piece 160 mm 3-jaw chuck with 1 set of jaws >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet attachment with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surfaces to be produced as if ground. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear stages >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT 2 >> Feeds: 0.03 to 0.15 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, height: 1.3 m, depth: 0.65 m Accessories and Equipment: Lsdpfxjvtp Ede Afisaa >> 1 piece 3-jaw chuck 125 mm with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly, and surface finishes similar to grinding can be achieved. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor B, lead and feed screw lathe with 3-axis digital readout from K&C, NEW, CE compliant!! Technical data: - Machine no.: 2442, year of manufacture: 1997 - Centre height: 165 mm - Centre distance: 750 mm Lsdpfx Afexcuazjioaa - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock: Morse taper 3 - Feeds: from 0.015 to 0.46 mm/rev - Thread cutting: metric, inch, module, and diametral pitch - Metric pitch range: 0.18 to 28 mm - Weight: approx. 1100 kg - Spindle brake, switchable - Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and features: - 3-axis digital readout by K&C, new, 12 months manufacturer's warranty, operating manual included Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switch, etc. - 1 pc. new 3-jaw chuck, 160 mm, incl. 2 sets of jaws - 1 pc. 4-jaw chuck, 200 mm, incl. 1 set of jaws - Collet chuck unit, NEW, and collets NEW, range 3 to 25 mm in 1 mm increments - Multifix toolpost size B, with 2 steel holders - Bed stop - Electronic spindle protection - Rear splash guard - Machine feet For safety: electronic spindle protection, 2 emergency stop buttons, change gear cover with limit switch, spindle brake About this machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been carried out. This newer generation of Weiler lathes is highly user-friendly. Take the opportunity to view and test the machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with NEW K&C 3-Axis Digital Readout Technical Data: >> Year of manufacture: 1987 Machine no.: 87 835 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock quill: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch threads >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> NEW K&C 3-Axis digital readout, 12 months' manufacturer's warranty with user manual Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, 200 tool programs, taper calculation, radius/diameter, quick-zero, counting direction toggle Lsdpfx Aowrmuxsfisaa >> 1 piece 160 mm 3-jaw chuck, NEW, 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck, 1 set of jaws >> Collet chuck and collets, NEW, from 3 to 26 mm in 1 mm increments >> Multifix B size toolpost with 2 holders >> Bed stop >> Electronic spindle guard >> Rear splashguard >> Coolant system >> Machine levelling feet About the Machine: For sale is a used Weiler Condor 81 in very good condition. The machine is, of course, fully operational and has been completely disassembled and newly painted. A very robust and high-performance machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has undergone complete electrical and mechanical inspection. A full oil change has been carried out. This newer generation of Weiler lathes is highly user-friendly. Take advantage of the opportunity to inspect and test the machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor B, lead and feed shaft lathe with brand-new K&C 3-axis digital readout, direct from a training workshop! Technical Data: Lsdpfxsw Nw Dqe Afieaa >> Machine No.: 91-1814, Year of manufacture: 1991 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027, size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake, selectable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Accessories and Equipment: >> 3-axis digital readout by K&C – NEW, 12 months manufacturer warranty with operating manual Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tool programming (200 tools), taper calculation, radius/diameter, quick-zeroing, count direction switch, etc. >> 1 piece 3-jaw chuck NEW, 160 mm with 2 sets of jaws >> 1 piece 4-jaw chuck, 160 mm, with 1 set of jaws >> Collet chuck NEW, and new collets from 2 to 24 mm in 1 mm increments >> Multifix toolpost size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear guard >> Fixed steady >> Machine feet Safety features: electronic spindle guard, 2 emergency stops, change gear box with limit switch, spindle brake About the Machine: Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. This is a very robust and powerful machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has undergone a thorough electrical and mechanical inspection by us, including a complete oil change. This newer generation of Weiler lathes is particularly user-friendly. Take advantage of the opportunity to view and test this machine under power at our facility.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor 81 - Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Data: >> Year of manufacture: 1988 Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 Size 5 with bayonet lock >> Tailstock taper MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm Lsdpoxu Hlaefx Afieaa >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Dimensions (LxHxD): 1.83 m x 1.29 m x 0.88 m Accessories and Features: >> 3-axis Heidenhain digital readout >> 1 pc new 3-jaw chuck with 2 sets of jaws >> Collet chuck system, collets from 3 to 30 mm, 40 collets (partially duplicate sizes) >> Multifix size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck >> Rotating centre Safety Features: >> Lead and feed screw cover >> 2 emergency stop buttons >> Spindle brake About the Machine: Offered here is a used Weiler Condor 81 lathe, year 1988, in very good condition. The machine is fully functional, of course. For safety, the lead and feed screws are equipped with protective covers. A very robust and powerful machine. The 3-axis Heidenhain digital readout makes work even easier and more precise. The machine has been electrically and mechanically checked by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine under power at our premises.

Kondisi: baru, TC 165 x 750V Image shows MIOTAL® TC 180 x 1000 Centre Distance: 750 mm Centre Height: 165 mm Swing over Bed: Ø 330 mm Bed Width: 190 mm Cross Slide Travel: 160 mm Top Slide Travel: 90 mm Spindle Mount: DIN 55029 (Camlock) D 1 - 4 Spindle Bore: Ø 40 mm Max. Chuck Diameter: Ø 200 mm Spindle Speed, infinitely variable: 30 - 2000 rpm Mechanical Gear Stages: 3 Motor Power: 2.2 kW Longitudinal Feed Z: (40) 0.044 - 1.96 mm/rev Cross Feed X: (40) 0.022 - 0.98 mm/rev Metric Threads: (32) 0.4 - 7.0 mm Imperial Threads: (32) 4 - 56 TPI Module Threads: (32) 0.4 - 7.0 Diametral Pitch Threads: (32) 7.5 - 112 Tailstock Quill Diameter: Ø 40 mm Tailstock Quill Taper: MT 3 Laedsir Igwopfx Afija Quill Travel: 100 mm Lateral Adjustment: ± 10 mm Weight, approx.: 650 kg Features: - Acceptance certificate according to DIN - Precision, hardened and ground guideways - Robust headstock with oil circulation lubrication, precision spindle bearings, gears hardened and ground for long-lasting quality - Electromagnetic spindle brake (TC), frequency inverter with electric braking system (V models) - Torsion-resistant machine beds made from MEEHANITE quality cast iron, stress-relieved and heavily ribbed for maximum smooth running - Electrical equipment by SIEMENS/SCHNEIDER - Overload protection for feed gearbox - Pulse button for main spindle - CE / IEC and German documentation and service Standard Equipment (Standard Accessories): - Machine base with splash protection back wall - 3-jaw lathe chuck - 4-way tool post - Foot pedal with mechanical brake system - Coolant system - Chuck guard and spindle cover conforming to European CE safety standards - 1 Fixed centre for main spindle - 1 Fixed centre MT3 - 1 Inspection certificate - Safety equipment and electrical system according to CE - Reducing sleeve for main spindle - Operating tools Available Options for this Lathe: - 3-axis digital readout - Multifix quick-change tool post system Also available as a geared head version

Kondisi: baru, TC 180 x 1000 V Distance Between Centers: 1000 mm Center Height: 178 mm Swing Over Bed: Ø 356 mm Bed Width: 190 mm Cross Slide Travel: 160 mm Top Slide Travel: 90 mm Spindle Mount: DIN 55029 (Camlock) D 1 - 4 Spindle Bore: Ø 40 mm Max. Chuck Diameter: Ø 200 mm Ledpfsir Imyex Afisaa Spindle Speed, Infinitely Variable: 30 – 2500 rpm Mechanical Variator Stages: 3 Motor Power: 2.2 kW Longitudinal Feed Z: (40) 0.044 – 1.96 mm/rev Cross Feed X: (40) 0.022 – 0.98 mm/rev Metric Threads: (32) 0.4 – 7.0 mm Imperial Threads: (32) 4 – 56 TPI Module Threads: (32) 0.4 – 7.0 Diametral Threads: (32) 7.5 – 112 Tailstock Quill Diameter: Ø 40 mm Tailstock Quill Taper: Morse Taper 3 (MT3) Quill Travel: 100 mm Lateral Adjustment: ± 10 mm Weight approx.: 750 kg Dimensions approx.: 1880 x 880 x 1390 mm Features: - Factory acceptance certificate according to DIN - Precision-hardened & ground guideways - Robust headstock with oil-circulation lubrication, precision spindle bearings, gears hardened and ground for long-term quality - Electromagnetic spindle brake (TC), frequency inverter with electrical braking (V-models) - Torsion-resistant machine beds made of MEEHANITE quality cast, stress-relieved and heavily ribbed for utmost running smoothness - Electrical equipment by SIEMENS/SCHNEIDER - Overload protection for feed gearbox - Impulse switch for main spindle - CE / IEC compliant with German documentation and local service Standard Equipment (Basic Accessories): - Machine stand with splash guard rear panel - 3-jaw chuck - 4-way tool post - Foot pedal with mechanical brake - Coolant system - Chuck and spindle guard according to European CE safety norms - 1 fixed center for main spindle - 1 fixed center MT3 - 1 inspection certificate - Safety devices and electrical setup in compliance with CE - Reduction sleeve for main spindle operating tools Available Options for this Lathe: - 3-axis digital readout - Quick-change tool post system Multifix Also available with gearbox variants

Kondisi: bekas, Tahun pembuatan: 1999, Turning diameter 150 mm Turning length 500 mm Total power requirement 4 kW Machine weight approx. 0.8 t O F F E R We can offer you, subject to prior sale and errors excepted, ex stock and without obligation: W E I L E R LZS - Universal Lathe with Digital Readout Model: PRIMUS VC Year of manufacture: 1999 _____ Lajdpfx Asvm Dv Djfisa Center height: 140 mm Max. turning diameter over cross slide: 150 mm Max. swing diameter over bed: 280 mm Distance between centers: 500 mm Spindle bore: 40 mm Infinitely variable speed: 30 - 4,000 rpm 24 longitudinal feeds: 0.02 - 0.63 mm/rev 24 facing feeds (longitudinal feeds x 8): 0.006 - ... mm/rev Metric threads: mm/pitch Imperial threads: 80 - 2 tpi Module threads: Module Spindle drive: 1.5 kW Total drive: 4 kW - 380 V - 50 Hz Weight: 800 kg Accessories / Special features: • SIEMENS 3-axis digital display for X-axis, Z-axis, and compound (summed Z-axis) • Multifix-A quick-change tool holder • Equipped with a 3-jaw chuck from WEILER, 140 mm diameter, mounted • Machine base for tool storage with integrated electrical cabinet, coolant system • Operating manuals Condition: Very good – demonstration ready. Ideal for training workshops. Delivery: ex stock – as inspected Payment: strictly net upon collection after receipt of invoice We look forward to your order. Further lathes of all sizes are available from stock – please contact us for more information.

Kondisi: bekas, Swing diameter over bed: 410 mm Swing diameter over support: 240 mm Turning length: 1000 mm Centre height: 205 mm Centre distance: 1000 mm Spindle bore: 47 mm Spindle speeds: 28 - 1250 rpm Feed rates - longitudinal: 0.03 - 8.8 mm/rev Feed rates - cross: 0.006 - 1.84 mm/rev Thread cutting - metric pitch: 0.25 - 76 mm Thread cutting - imperial: 1/2 - 152 TPI Thread cutting - module: 0.25 - 22 mm Bed width: 320 mm Laedpfx Aovcrmcjfija Tailstock quill diameter: 55 mm Tailstock taper: MT 4 Cross slide travel: 290 mm Top slide travel: 120 mm Total connected load: 5.5 kW Machine weight approx.: 1.3 t Machine dimensions (L x W x H): 2.32 x 1.15 x 1.22 m Accessories: 3-jaw chuck RÖHM 160 mmø, MULTIFIX toolpost with 2 holders, fixed steady rest, live centre, coolant system

Kondisi: baik (bekas), Tahun pembuatan: 1998, Manufacturer: Henninger Model: ZS-201 Year of Manufacture: 1998 - Self-centering device - Double column slideways Laodpsvt Tuijfx Afisa - Dressing unit - Tailstock with rack and pinion drive - Eccentric adjustment 0–20 mm - Large cone-stone tooling package Specifications Metric | Imperial Minimum workpiece diameter: 20 mm Maximum workpiece diameter: 450 mm Maximum workpiece length: 1200 mm Spindle speed: 18,300 rpm Maximum grinding angle: 45–120° Maximum workpiece weight: 190 kg Approximate Dimensions Length: 1,250 mm Width: 1,250 mm Height: 1,900 mm Weight: 365 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. All information is given in good faith; however, accuracy cannot be guaranteed. As such, this information does not constitute representation or contractual terms. We recommend verifying all critical details.

Kondisi: baik (bekas), Manufacturer: STANKO Model: 7D430 Year of Manufacture: 1994 Table rotation: 360° Head tilting capability up to 10° Large cabinet with slotting and keyway tools Lubrication system Completely overhauled in 1994 Specifications Metric | Imperial Table diameter: Ø 630 mm Table load capacity: 1,000 kg Ram stroke: 320 mm X-axis travel: 650 mm Laodpfxewpud Ae Afisa Y-axis travel: 510 mm Throat depth: 500 mm Stroke range: 3 - 38 m/min Power: 12 kW Approximate Dimensions Length: 3,000 mm Width: 2,200 mm Height: 3,000 mm Weight: 6,150 kg Please Note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, this does not constitute any representation or contractual terms. We recommend verifying all critical details.