Beli Kraussmaffei Krauss Maffei Km 350-3000 bekas (19.923)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Krauss Maffei KM 250 – 1900 C1 Injection Moulding Machine Year of manufacture: 2007 Control system: MC4 Operating hours: only 8,900! Clamping unit: Clamping force: 2,500 kN Nwsdpjw A N Hfofx Abwoh Max. mould opening force: 160 kN Movable platen traverse force – opening: 86 kN Movable platen traverse force – closing: 68 kN Mould platen dimensions (H × L): 995 × 1,050 mm Tie bar spacing (H × W): 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight between platens: 1,150 mm Ejector stroke (hydraulic): 200 mm Ejector force (forward/back): 58 / 28 kN Injection unit: Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1,778 bar Stroke volume: 1,047 cm³ Shot weight (PS): 953 g Injection rate: 400 cm³/s Screw speed (standard/option): 218 / 306 rpm Max. plasticising rate: 75 g/s Nozzle contact force: 110 kN Electro-hydraulic equipment: Pump motor power: 55 kW Installed heating power: 30 kW Number of barrel heating zones: 6 Oil tank capacity: 720 l Dimensions and weight: Machine dimensions (L × W × H): approx. 6.21 × 2.04 × 2.39 m Total weight: 14,500 kg Maximum mould weight: 3,430 kg Accessories and additional equipment: Oil tank Anti-vibration pads 3 × core pullers 8 × hot runner control zones 2 × air valves Robot interface compliant with Euromap 67 Additional information: Machine located in Poland Ready for collection Possibility to arrange loading, transport, installation, and commissioning

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Krauss Maffei KM 160–750 CX Injection Moulding Machine Year of manufacture: 2006 Fully hydraulic clamping system. MC5 control system with colour monitor, integrated control panel, and built-in USB ports. Plasticising Unit 1 complete HPS-UN plasticising unit for thermoplastics: - screw diameter: 50 mm - check valve, open nozzle - nozzle radius: 10 mm - nozzle orifice: 4 mm Technical Specifications Clamping Unit - Clamping force: 1,600 kN - Mold opening force: 86.4 kN - Movable platen force: - opening: 44.8 kN - closing: 37.8 kN - Platen dimensions (H × V): 820 × 845 mm - Tie bar clearance (H × V): 520 × 520 mm - Mold opening stroke: 650 mm - Mold height: 300 mm - Platen opening stroke: 950 mm - Ejector stroke: 150 mm - Ejector force: 22.6 / 9.9 kN Injection Unit - Screw diameter: 50 mm - Injection pressure: 1,892 bar - Shot volume: 393 cm³ - Shot weight (PS): 357 g Nwodpfx Abex Thzpewoh - Screw speed (std/opt): 390 / 490 rpm Electrical and Hydraulic Equipment - Rated pump motor power: 22 kW - Installed heating capacity: 10.97 kW - Number of barrel heating zones: 5 - Dry cycles (Euromap): 1,600 1/h - Oil tank capacity: 489 l Dimensions & Weight - Net weight with control cabinet: 6.0 t - Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Krauss Maffei KM 110–750 CX Injection Moulding Machine Year of manufacture: 2007 Fully hydraulic clamping system. MC5 control with colour monitor, integrated operator panel, and 3 USB ports. Plasticising Unit Complete plasticising unit for thermoplastics Version with abrasion protection Screw diameter: 40 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 1,100 kN Mould opening force: 70 kN Movable platen force: - Opening: 35.4 kN - Closing: 31.4 kN Platen dimensions (H × V): 745 × 770 mm Tie bar spacing (H × V): 470 × 470 mm Mould opening stroke: 600 mm Mould height (installation): 300 mm Platen opening stroke: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 40 mm Injection pressure: 2,500 bar Injection volume: 251 cm³ Shot weight (PS): 228.41 g Screw speed (standard/option): 295 / 355 rpm Electrical-Hydraulic Equipment Rated pump motor power: 22 kW Installed heater capacity: 15.62 kW Number of cylinder heating zones: 5 Number of dry cycles (EUROMAP): 2,000 cycles/h Oil tank capacity: 489 l Nwsdpfx Abjx Avhyswsh Dimensions and Weight Net weight with control cabinet: 6.2 t Machine dimensions (L × W × H): 4.9 × 1.6 × 2.1 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Krauss Maffei KM 300-1000 CX Injection Moulding Machine Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with color monitor, integrated control panel, and disk drive station Clamping system: Fully hydraulic Plasticizing Unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 15 mm, opening: 3 mm Clamping Unit Clamping force: 3,000 kN Opening force: 169 kN Mounting plate dimensions (h × v): 995 × 1050 mm Tie-bar clearance: 630 × 630 mm Mold opening stroke: 820 mm Minimum mold height: 330 mm Maximum daylight opening: 1,150 mm Ejector stroke: 200 mm Ejector force (forward/back): 58 / 28 kN Injection Unit Screw diameter: 50 mm L/D ratio: 22.0 Injection pressure: 2,304 bar Injection volume: 432 cm³ Nodpfx Ajw U Rcdobwewh Shot weight (PS): 393 g Injection speed: 170 mm/s Injection flow rate: 334 cm³/s Screw speed (standard): 370 rpm Plasticizing capacity (at standard speed): 54.3 g/s Electrical and Hydraulic Equipment Pump motor power: 45 kW Heater power: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke according to Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Dimensions and Weight Net weight (including control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, en-Wtryskarka Krauss Maffei KM 420-2700 C2 Year of manufacture: 2002 Machine Description The Krauss Maffei KM 420-2700 C2 injection moulding machine is a robust and precise unit with a high clamping force of 4,200 kN, designed for processing thermoplastics. Equipped with a reliable hydraulic system and a precise control system, it ensures stable and repeatable operation in demanding production environments. Technical Data Clamping Unit Parameter Unit Value Clamping force kN 4,200 Max. mold opening force kN 250 Movable platen shift force – opening kN 124 Movable platen shift force – closing kN 102 Dimensions of mounting plates (H × L) mm 1,270 × 1,200 Clearance between tie bars (H × L) mm 800 × 800 Mold opening stroke mm 1,020 Minimum mold height mm 380 Maximum daylight mm 1,400 Ejector force (forward / backward) kN 95 / 48 Maximum mold weight kg 6,700 Injection Unit Parameter Unit Value Screw diameter mm 70 L/D ratio – 20 Injection pressure bar 1,829 Shot volume cm³ 1,097 Shot weight (PS) g 998 Injection speed cm³/s 513 Max. plasticising rate g/s 108 Nozzle pressure kN 173 Electrical and Hydraulic Equipment Parameter Unit Value Rated pump motor power kW 75 Installed heating capacity kW 36 Number of cylinder heating zones – 7 Oil tank capacity l 1,075 Nsdpfx Aexq Akkebwjwh Dimensions and Weight Parameter Unit Value Machine dimensions (L × W × H) m 7.06 × 2.33 × 2.51 Total machine weight kg 20,500

Kondisi: siap digunakan (bekas), Mesin bekas Mesin injeksi plastik Produsen: Krauss Maffei Tipe: KM 80 C1 Tahun pembuatan: 2000 Hanya tersisa 1 unit di stok Tanpa waktu pengiriman, siap kirim segera Nwjdsu Ti Sropfx Abwoh Kunjungan dapat dilakukan dengan janji terlebih dahulu Mesin tidak lagi terhubung ke listrik / Tanpa sambungan air pendingin Mesin disimpan secara profesional Data teknis: Gaya penutup: 800 kN Pelat pemasangan (mm): 610×610 Jarak antar tie-bar (mm): Tinggi pemasangan cetakan (mm): 250 Jarak pelat (mm): 750 Kontrol: MC4 Bahasa tampilan layar: Jerman (tidak dapat diubah) Diameter sekrup unit injeksi (mm): 45 Tekanan injeksi (bar): 1878 Volume langkah (cm³): 275 Daya penggerak pompa (kW): 18,5 Daya pemanas (kW): 13 Isi oli (l): 270 Dimensi (m): 4,3 x 1,4 x 2,1 Bobot total: 3,2 ton Foto tambahan atas permintaan.

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), Clamping force: 2,500 kN, clear tie bar spacing: 630 mm/630 mm, opening stroke: 1,150 mm, minimum mould installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2,000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control system: MC4. Machine dimensions: 5,700 mm / 2,200 mm / 2,300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8x hot runner controllers, 4x core pulls, blow-out unit, accumulator, hydraulic tie bar withdrawal unit, energy-saving circuit, ALS interface, 20mA interface, and color dosing unit interface. On-site inspection possible, documentation available. Nedpeuiykdefx Abwewh

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), Two injection moulding machines from Krauss Maffei are available: 1) Krauss Maffei KM 50 C1 - Year of manufacture: 1999 - Injection unit: SP220 - Screw diameter: 30 mm - L/D ratio: 23 - Injection pressure: 2500 bar - Shot volume: 85 cm³ - Machine dimensions (LxWxH): approx. 3200 mm / 1350 mm / 1800 mm - Weight: approx. 2500 kg - Control system: MC4 - Operating hours: approx. 86,000 h 2) Krauss Maffei KM 125 C1 - Year of manufacture: 2000 - Injection unit: SP520 - Screw diameter: 45 mm Nsdpfsw Emybex Abwswh - L/D ratio: 20 - Injection pressure: 1878 bar - Shot volume: 217 cm³ - Machine dimensions (LxWxH): approx. 4500 mm / 1550 mm / 2200 mm - Weight: approx. 5500 kg - Control system: MC4 - Operating hours: approx. 82,000 h Documentation is available. On-site inspection possible.

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), Clamping force: 1500 kN, screw diameter: 50 mm, tie bar spacing: 500 mm, platen dimensions (X/Y): 780 mm / 790 mm, opening stroke: 600 mm, daylight: 900 mm, ejector stroke: 150 mm, shot volume: 305 cm³, shot weight: 278 g, injection pressure: 2336 bar. Machine dimensions (X/Y/Z): approx. 4700 mm / 1550 mm / 2200 mm, weight: approx. 7000 kg, control system: MC4. Includes Sepro handling system. Documentation available. On-site inspection possible. Njdew Hthzepfx Abwewh

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036946, gaya penjepit: 800 kN, diameter sekrup: 40 mm, volume langkah: 201 cm³, tekanan injeksi: 1.860 batang, berat injeksi: 183 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.850 mm, berat keseluruhan: 5.600 kg, kapasitas pemanasan: 11,5 kW (15,64 hp), jenis penggerak: Vollelektrisch, bentang bebas: 735 mm, berat alat: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The precisionMolding base injection moulding machine offers the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. This machine can be used in a wide variety of application areas such as packaging industry, electrical and electronics industry, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad range of applications – High energy efficiency thanks to an all-electric machine concept – Fast delivery times through a base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL UNIT - MC P1 with 15” TFT colour display with multi-touch functions CLAMPING UNIT - Clamping force: kN 800 - Max. mould opening force: kN 120 - Tie bar spacing (h x v): mm 470 x 420 - Platen size (h x v): mm 610 x 560 - Min. – max. mould height: mm 150 – 400 - Opening stroke: mm 750 - Max. mould opening stroke: mm 350 - Ejector drive: electric - Ejector stroke: mm 100 - Ejector force forward/backward: kN 22 / 22 - Ejector speed forward/backward: mm/s 300 / 300 - Max. mould weight: kg 600 INJECTION UNIT - Screw diameter/type: mm 40 / Standard - Effective L/D ratio: 20.0 - Injection pressure: bar 1860 - Shot volume: cm³ 201 - Shot weight at max. stroke for PS: g 183 - Injection speed: mm/s 200 - Injection flow rate: cm³/s 251 - Screw drive/speed: rpm 334 - Plasticising rate (standard): g/s 24.7 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 20.6 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 400 / 50 3-phase with neutral conductor WEIGHT AND DIMENSIONS - Net weight with control cabinet: t 5.6 - Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT - Low-wear plasticising unit - BluePower full insulation of plasticising cylinder - Open nozzle - Air valve 1-fold (BWAP) - Pneumatic control for hot runner shut-off 1-fold - Electrical cascade interface 4-fold Nwjdpfxsud H Dmj Abweh - Euromap interface for handling E18, E63 - Euromap interface (central computer) E67, E77 - Water battery 4-fold - Automatic central lubrication - Adaptive Process Control (APC) - Injection-compression control - Graphic analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras can be offered on request. We look forward to your enquiry.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61037337, gaya penjepit: 800 kN, diameter sekrup: 30 mm, volume langkah: 113 cm³, tekanan injeksi: 2.500 batang, berat injeksi: 103 g, tinggi cetakan (min.): 400 mm, gaya ejektor: 22.600 N, lintasan ejektor: 150 mm, langkah pembukaan: 900 mm, panjang total: 3.960 mm, lebar total: 1.480 mm, tinggi total: 2.020 mm, berat keseluruhan: 3.550 kg, kapasitas pemanasan: 10,9 kW (14,82 hp), jenis penggerak: Hadraulisch, bentang bebas: 470 mm, berat alat: 1.000.000 g,

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036936, gaya penjepit: 800 kN, diameter sekrup: 35 mm, volume langkah: 135 cm³, tekanan injeksi: 1.837 batang, berat injeksi: 123 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.820 mm, berat keseluruhan: 5.900 kg, kapasitas pemanasan: 8,9 kW (12,10 hp), jenis penggerak: Vollelektrisch, bentang bebas: 470 mm, berat alat: 600.000 g, Plastics injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines: The precisionMolding base injection moulding machine provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. The machine can be utilised in a wide range of applications, such as packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits: – Optimised cost-performance ratio for a broad spectrum of applications – High energy efficiency through an all-electric machine concept – Fast lead times thanks to the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.: 61036936, new, YOM 2023) CONTROL SYSTEM  MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT  Clamping force kN 800  Max. mould opening force kN 120  Daylight (h x v) mm 470 x 420  Platen size (h x v) mm 610 x 560  Mould installation height min.-max. mm 150 - 400  Max. opening stroke mm 750  Max. mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force fwd/rev kN 22 / 22  Ejector speed fwd/rev mm/s 300 / 300  Max. mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 35 / standard  Effective L/D ratio 20.0  Injection pressure bar 1837  Shot volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow cm³/s 192  Screw drive / speed rpm 382  Plasticizing rate (standard screw) g/s 19.5  Nozzle contact force kN 30 Nwsdpfx Aeuggb Debwoh ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heating power kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Wear-resistant plasticizing system  BluePower full insulation for plasticizing cylinder  Open nozzle  1-fold air valve (BWAP)  1-fold pneumatic control for hot runner shut-off  4-fold electric interface for cascade control  Electrical pre-installation for hydraulic auxiliary unit  Euromap interface for handling E18, E63  Euromap interface (host computer) E67, E77  4-fold water manifold  Automatic central lubrication  Adaptive Process Control (APC)  Injection compression moulding switch  Graphic analysis package  Swing-out injection unit The machine is located at our plant in Parsdorf and is available at short notice. Additional optional features can be offered on request. We look forward to your enquiry.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036721, gaya penjepit: 6.500 kN, diameter sekrup: 70 mm, jarak antara tiang: 1.110 mm, volume langkah: 1.078 cm³, tekanan injeksi: 1.877 batang, berat injeksi: 981 g, langkah pembukaan: 3.200 mm, tinggi pelat: 1.540 mm, jenis penggerak: Hydraulisch, bentang bebas: 3.200 mm, berat alat: 2.200.000 g, Injection molding machines directly from the manufacturer! As KraussMaffei, the manufacturer, we are pleased to offer you our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW series sets new benchmarks in quality and productivity. The sophisticated GuideX slide shoe ensures optimal absorption of force, increasing tooling lifetime. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT color screen, multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Maximum mold opening force kN 455 - Daylight (H x V) mm 1110 x 960 - Mounting platen (H x V) mm 1540 x 1440 - Mold height (min. - max.) mm 1550 (without center platen) - Maximum opening stroke mm 3200 - Maximum mold open distance mm 1650 - Maximum mold weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter / type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight (max. stroke, PS) g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter / type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight (max. stroke, PS) g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL PARAMETERS - Connected load kW 341 - Power supply V / Hz 400 / 50 3-phase with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit Nedpfxew U N Ixe Abwewh - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mold heating 96-fold (3.5 kW each) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphics analysis package - Sliding table with servo-driven turning unit - Vertical center platen - Parallel clamping and opening movements during injection, with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface: signal interface for connection of an RPM system - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for “1-K Dummy Operation” - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered upon request. We look forward to your inquiry.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2015, Used injection molding machine directly from the manufacturer! As the manufacturer KraussMaffei, we are offering one of our used injection molding machines for sale. CONTROL SYSTEM - MC4 TECHNICAL DATA CLAMPING UNIT - Clamping force: 5,000 kN - Distance between tie bars (H x V): 900 x 800 mm - Max. mold opening distance: 1,170 mm - Min. mold installation height: 480 mm - Opening stroke of mounting platen: 1,650 mm - Ejector stroke: 250 mm - Ejector force: 95 kN (Retract: 48 kN) INJECTION UNIT - Screw diameter: 90 mm - L/D ratio: 20 - Injection pressure: 1,742 bar - Injection volume: 1,953 cm³ - Shot weight for PS: 1,777 g - Injection flow rate: 649 cm³/s - Nozzle contact force: 115 kN Electrical Specifications - Pump connected load: 90 kW - Heating power: 44 kW Weight and Dimensions - Net weight: 25.8 t - Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m As a rule, we supply this system in fully functional base condition. Additionally, as the original manufacturer, we can offer various options depending on individual requirements, such as: - Upgrades for energy optimization - Integration with KraussMaffei digital products (where applicable) - Plasticizing retrofits - Optional: Organization and provision of delivery (Not included in price) - Optional: Installation and commissioning (Not included in price) Nwodenh Rnujpfx Abwsh With us, you benefit from first-class service and also have the opportunity to purchase your desired spare parts packages for wear parts to ensure uninterrupted production with your new pre-owned system. Do not hesitate to contact us with your inquiry!

Kondisi: bekas, Tahun pembuatan: 2006, Mesin injection moulding Krauss Maffei KM 800-4300 MX, tahun 2006 Mesin dilengkapi sebagai berikut: - 5 kontrol kaskade hidrolik - Unit injeksi dengan 90 Nodpfew Hwr Djx Abwowh - Sistem kontrol MT5 - Sistem penanganan Krauss Maffei - 2 sabuk konveyor

Kondisi: bekas, Tahun pembuatan: 2004, Krauss Maffei KM125-390 C2 (tahun pembuatan 2004) Gaya penjepit: 125 kN Nodpsw D Rmijfx Abwowh Jam operasional: sekitar 63.000 jam Mesin dapat dilihat kapan saja

Kondisi: bekas, Tahun pembuatan: 2010, Injection moulding machine Krauss Maffei KM 650-4300, year 2010 Nodpfx Abjw Hwthjwewh

Kondisi: bekas, Tahun pembuatan: 1999, Mesin injeksi plastik Krauss-Maffei 800/5700MC tahun produksi 1999 untuk dijual. Data teknis tersedia berdasarkan permintaan. Nwodpfxsyg Hbgo Abweh

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 60.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 9.500 kN, diameter sekrup: 105 mm, jarak antara tiang: 1.400 mm, volume langkah: 4.546 cm³, tekanan injeksi: 1.778 batang, berat injeksi: 4.137 g, injection_molding_machine_specs Nwjdpfsx Hz I Njx Abwoh

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 68.590 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.600 kN, diameter sekrup: 50 mm, volume langkah: 393 cm³, Clamping force: 1600 kN Max. mold opening force: 87 kN Movable platen opening force: 45 kN Movable platen closing force: 38 kN Clamping platen (H x V): 820 x 845 mm Clearance between tie bars (H x V): 520 x 520 mm Mold opening stroke: 650 mm Minimum mold installation height: 300 mm Max. daylight: 950 mm Ejector stroke: 150 mm Ejector force fwd/rev: 23 kN Injection unit: Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1892 bar Shot volume: 393 ccm Shot weight (PS): 358 g Injection flow rate: 177 ccm/s Screw speed: 265 rpm Plasticising throughput: 36.2 g/s Nozzle contact force: 50 kN Electrohydraulic equipment: Rated power of pump motor: 22 kW Installed heating capacity: 16 kW Number of barrel heating zones: 5 Oil filling capacity: 489 liters Dimensions and weights: Space required approx.: 5.50 x 2.00 x 2.20 m Total weight: 6600 kg Max. mold weight: 1862 kg Nodpoydp D Eofx Abwewh Accessories: - Vibration/isolation elements - Krauss Maffei Robot LR 100 (X: 550 mm, Y: 1200 mm, Z: 2500 mm, C: 0-90°) Additional equipment: - 1 x Air valve - 2 x Core pulls - Robot interface according to Euromap 67

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 25.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 8.500 kN, diameter sekrup: 95 mm, volume langkah: 3.367 cm³, Clamping force: 8,500 kN Maximum tool opening force: 560 kN Moving platen travel force (open): 153 kN Moving platen travel force (close): 117 kN Nedoyb Sx Hopfx Abwowh Mounting plate (H x V): 1600 x 1600 mm Clear distance (H x V): 1140 x 1140 mm Mold opening stroke: 1600 mm Mold installation height min./max.: 500 / 1100 mm Maximum opening width: 2100 mm Ejector stroke: 300 mm Ejector force forward/backward: 200 / 100 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1795 bar Stroke volume: 3367 ccm Shot weight (PS): 3064 g Injection rate: 690 ccm/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated pump motor output: 90 kW Installed heating capacity: 53 kW Cylinder heater control zones: 7 Oil capacity: 1500 l Dimensions and weights: Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 43,000 kg Max. mold weight: 12,200 kg Accessories: - Oscillation elements Additional equipment: - 1 x air valve - 4 x hydraulic core pulls - 12 x hydraulic cascades - 2 x 12-fold water manifold - Robot interface according to Euromap 67

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 70.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 6.500 kN, diameter sekrup: 95 mm, volume langkah: 3.367 cm³, Clamping force: 6500 kN Max. mold opening force: 346 kN Movable platen opening force: 169 kN Movable platen closing force: 144 kN Clamping platen (H x V): 1520 x 1470 mm Clear width between tie bars (H x V): 1000 x 930 mm Mold opening stroke: 1150 mm Minimum mold installation height: 600 mm Max. daylight: 1750 mm Ejector stroke: 250 mm Ejector force forward/back: 95 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1795 bar Shot volume: 3367 ccm Shot weight (PS): 3064 g Injection flow rate: 690 ccm/s Screw speed: 153 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated drive power, pump motor: 90 kW Installed heating capacity: 50 kW Heater zones, barrel: 7 Dimensions and weight: Space requirement approx.: 9.83 x 2.90 x 2.80 m Total weight: 43,170 kg Nodpfxjx Hzzco Abwswh Accessories: - Anti-vibration elements - Krauss Maffei Robot LR300 X: 1200 mm, servo motor driven Y: 1000/1000 mm, telescopic, servo motor driven Z: 3500 mm, servo motor driven C: 0 - 90°, pneumatic - Conveyor belt - Safety enclosure Additional equipment: - 1 x air valve - 6-fold pneumatic cascade control - 12 x hot runner zones - 2 x hydraulic core pulls on moving platen - 2 x hydraulic core pulls on fixed platen

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 58.670 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.600 kN, diameter sekrup: 45 mm, volume langkah: 318 cm³, Clamping force: 1600 kN Maximum mold opening force: 87 kN Movable platen opening force: 45 kN Movable platen closing force: 38 kN Clamping plate dimensions (H x V): 820 x 845 mm Clear distance between tie-bars (H x V): 520 x 520 mm Mold opening stroke: 650 mm Minimum mold installation height: 300 mm Maximum daylight: 950 mm Ejector stroke: 150 mm Ejector force forward/back: 23 kN Injection unit: Screw diameter: 45 mm L/D ratio: 22.4 Injection pressure: 2336 bar Shot volume: 318 ccm Shot weight (PS): 289 g Injection flow: 143 ccm/s Screw speed: 265 rpm Plasticizing rate: 29.3 g/s Nozzle contact force: 50 kN Electrohydraulic equipment: Rated pump motor power: 22 kW Installed heating capacity: 16 kW Nsdpfx Absydp Idowswh Heating zones (cylinder): 5 Oil fill volume: 489 l Dimensions and weights: Space requirement approx.: 5.00 x 2.00 x 2.20 m Total weight: 6600 kg Max. mold weight: 1862 kg Accessories: - Anti-vibration mounts - Krauss Maffei robot LR 100 X: 550 mm Y: 1200 mm Z: 1500 mm C: 0 - 90° Additional equipment: - 1 x air valve - 2 x hydraulic core pulls - 6 x hot runner control zones - Robot interface to Euromap 67

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 6.500 kN, diameter sekrup: 70 mm, tekanan injeksi: 2.389 batang, lintasan ejektor: 135 mm, langkah pembukaan: 1.825 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping platen dimensions (H x V): 1,520 x 1,470 mm Clearance between tie bars (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mould installation height: 675 mm Maximum daylight: 1,825 mm Ejector stroke: 135 mm Ejector force forward/return: 226 kN Injection Unit Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Shot volume: 1,097 cc Shot weight (PS): 998 g Injection flow rate: 393 cc/s Screw speed: 218 rpm Plasticizing rate: 83 g/s Nozzle contact force: 173 kN MACHINE DETAILS Nedpoycqc Tofx Abwewh Dimensions & Weight Footprint approx.: 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Electrohydraulic Equipment Rated pump motor power: 75 kW Installed heating capacity: 36 kW Cylinder heating control zones: 7 EQUIPMENT Oscillating elements 1 x air valve 8-fold pneumatic cascade control Accumulator 2 x hydraulic core pulls at moving platen 2 x hydraulic core pulls at fixed platen Robot interface according to EUROMAP 67

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, diameter sekrup: 85 mm, Complete extrusion line. Individual components can also be offered upon request. The line has been used for the production of pipes made from PP filled with chalk and barium sulfate. Components: - 4-Component Colortronic dosing system (new control installed in 2017) - Berstorff KMC 85/2 (screws replaced in 2019) Nsdpfeu Rda Ijx Abwowh - Side feeder - Complete control system for dosing units and extruder - Single oil temperature control unit - Maag melt pump - KraussMaffei extrusion head 40 to 160 mm (with various sets) - Battenfeld V250VA vacuum tank - Battenfeld K250 VA spray bath - Sica C250-4 haul-off unit - Rollepaal CCM 32/170-2 saw - Battenfeld tilting table