Beli Romer Peralatan Pelapis Bubuk bekas (22.900)

Tahun pembuatan: 2020, Kondisi: baru, Washing machines and ultrasonic cleaning baths for washing, phosphating, chromating, degreasing, and removing paint coatings Materials ROMER ultrasonic cleaning systems use stainless steel to provide protection against acids. The tanks feature an additional insulation layer to prevent heat loss and enable faster heating. High-quality materials ensure long service life of the vibrating elements. Heating system The heating elements used in ROMER tanks are made from top-grade materials and high-temperature resistant ceramic components. The heating system ensures high thermal efficiency, with hot water automatically mixing with cold water to heat the entire tank evenly. Hsdpfx Alofz I N Ts Isl Ultrasonic transducers The ultrasonic elements used in ROMER cleaning machines are installed in immersion modules, which better reflect vibrations and are replaceable. The ultrasonic frequency range is 20–40 kHz depending on the item being cleaned; lower frequencies are used for large, robust parts and higher frequencies for jewelry, delicate mechanical systems, etc. All transducers are connected by high-temperature resistant cables.

Tahun pembuatan: 2020, Kondisi: baru, An automatic car wash system is a solution designed to reduce costs, improve quality, and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying. It is designed to ensure that as little liquid as possible carries over into subsequent processes, saving money and enhancing wash quality. This is crucial, as the apparent savings achieved with systems not utilizing these solutions can lead to significantly higher disposal costs for chemicals and waste in the future. Attention should also be paid to maintaining proper bath parameters. Research and development have enabled us to design a car wash with an optional detail drying function, where, after washing, hot air is blown by a fan. The car wash features an advanced macro-programming system. Depending on the number of tanks, each macro can comprise up to 10 steps. Operations can be repeated and reordered as required. Each tank has its own icon and name, allowing operators to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be executed either between processes or at the end of the cycle. Hjdpfx Aefz Nblol Iel • Controls on a swivel arm for improved accessibility • PLC microprocessor control • 7" touchscreen control panel • A much higher number of nozzles compared to other solutions • (Option) Post-wash drying capability • Ability to create custom advanced programs • Advanced damper system made from acid-resistant sheet steel, double-secured with limit switches • Control system for reliable sealing and full opening of dampers • Separate lines, nozzles, and tanks for each treatment step to minimize fluid mixing • Intelligent control – in the event of a power outage or sudden shutdown, fluids cannot mix • Fully automatic operation

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Up to 12 powder injectors Description • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recycling with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injection nozzles with compressed air Hedpjfz U Nuofx Al Iol • Hopper powder level sensor • Automatic tray refill with paint from cardboard • Paint level sensor in the refill box • An acoustic alarm warns the operator when the paint supply in the box is low • The center is connected to the cabin control via the ModBus protocol • Programmable powder suction valve to keep the powder center clean

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Up to 12 powder injectors Description • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recycling with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injection nozzles with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard • Paint level sensor in the refill box • An acoustic alarm warns the operator when the paint supply in the box is low Hsdpfx Aofz U Rcol Isl • The center is connected to the cabin control via the ModBus protocol • Programmable powder suction valve to keep the powder center clean

Tahun pembuatan: 2020, Kondisi: baru, 7" Touch Panel Hodpfx Asfz U Tqol Ijl The large color touchscreen panel is aesthetically pleasing and offers comfortable, intuitive operation. You can configure all essential parameters directly on it. Storage for 20 Programs with 10 Events Each It is possible to store up to 20 programs and activate up to 10 consecutive time-temperature events, arranged within the heating curve. This is particularly required for more demanding processes. Gas/Oil Consumption Data Consumption is calculated based on the burner settings. This function allows you to estimate the cost of a specific cycle, plan consumption, and monitor staff. Dual-channel Recorder with USB Cycle Parameters Every furnace is equipped with a recorder that logs all ignition parameters, including two temperature channels—just like a flight data recorder—onto a USB stick.

Tahun pembuatan: 2020, Kondisi: baru, • PLC Microprocessor Control • HMI Control Panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – prevents fluid mixing in the event of power failure or sudden shutdown The control box features IP54 technology User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners use sheets that protect against chemicals. The washing walls provide splash protection, and thanks to the closed chemical circuit, the process can be carried out with minimal chemical usage. Due to the small amount of refrigerant required, it is easy to heat and cheaper to purchase. Additionally, you can wash large components that cannot be cleaned in standard tanks. Filtration system Thanks to the filtration system, the chemicals operate in a closed loop; three different filters of varying thickness are used to prevent debris and grease from entering the circuit. The chemicals are stored in heated stainless steel tanks and are pumped under pressure to the lance. Washing dimensions The high-pressure cleaner allows for washing large items and optionally features a rotating platform to turn the cleaned items; components can be loaded onto it by forklift or crane. High-pressure pumps The wash system consists of two preparation stages. Both processes have separate sets of pipes, pumps, wires, and spray guns to minimize mixing of agents during phase change. The drains have separate valves to manage liquid return. The wash system is equipped with a logic controller that manages all components. Chemicals are supplied by a highly durable, acid-resistant, multi-stage AISI304 pump (3 kW, up to 20 bar). The rinse phase uses a high-pressure piston pump with ceramic pistons (3 kW), delivering 160–200 bar. Hsdpof Aaaljfx Al Isl

Tahun pembuatan: 2020, Kondisi: baru, The use of a photocell in the part's working area enables measurement of its length, thus allowing the spray guns to be activated when the part enters their range and deactivated immediately after painting is completed. The photocell is included as standard equipment. Part identification with special tags. Hjdofy T Aropfx Al Iol There are identification plates with holes mounted on the workpiece sling. Based on this, the PLC controller together with the photocell detects the painted part, turning the guns on and off at the right moment, thereby saving energy and powder coating. Vertical shape detection of the part. The use of light curtains with horizontal sensors allows the PLC controller to analyze the part’s vertical shape. The PLC calculates the expected time for the part to arrive within the gun area; this enables selective activation or deactivation of the guns. Utilization of light curtains with multiple sensors, both horizontal and vertical. This solution enables precise measurement of the part’s dimensions, allowing for manipulator control as well. Benefits of using photocells or light curtains include primarily the savings of powder and energy by avoiding paint application in areas with no part present. With light curtains, precise gun control is possible.

Tahun pembuatan: 2020, Kondisi: baru, ROMER® is the largest manufacturer of powder coating equipment in Poland and one of the largest in Europe. ROMER® comprises over 10,000 manufactured units that are in operation in more than 45 countries worldwide. Hedpfjfzq Ryex Al Iol ROMER® produces individual technological machines for powder coatings as well as complete, fully automatic turnkey coating lines. ROMER® provides heating solutions for the aerospace and automotive industries for some of the world's leading companies. We offer warranty and post-warranty service for the equipment we sell, including a full range of spare parts.

Tahun pembuatan: 2020, Kondisi: baru, Washing machines and ultrasonic cleaning baths for washing, phosphating, chromating, degreasing, and removing paint coatings Materials Hjdpfx Aofz Aw Hol Iol ROMER ultrasonic cleaning systems use stainless steel to provide protection against acids. The tanks feature an additional insulation layer to prevent heat loss and enable faster heating. High-quality materials ensure long service life of the vibrating elements. Heating system The heating elements used in ROMER tanks are made from top-grade materials and high-temperature resistant ceramic components. The heating system ensures high thermal efficiency, with hot water automatically mixing with cold water to heat the entire tank evenly. Ultrasonic transducers The ultrasonic elements used in ROMER cleaning machines are installed in immersion modules, which better reflect vibrations and are replaceable. The ultrasonic frequency range is 20–40 kHz depending on the item being cleaned; lower frequencies are used for large, robust parts and higher frequencies for jewelry, delicate mechanical systems, etc. All transducers are connected by high-temperature resistant cables.

Tahun pembuatan: 2020, Kondisi: baru, ROMER is also engaged in the production of overhead conveyor systems. Cross transfers (lateral transport systems) are designed and manufactured for specific installations. Examples of equipment are listed below: Transport systems Depending on customer requirements, the transport systems can either move on the floor or be suspended from rails. - For efficient solutions in manual installations, we recommend overhead cross beams (lateral transport). - In automated systems, chain conveyors are most commonly used, as they operate continuously and provide an excellent solution for companies focused on quality and process repeatability. Hjdpfxjfz Difj Al Isl - For businesses that produce different items simultaneously and, for example, operate multiple booths with various colors, flexible solutions utilizing power-free conveyors are used. This is the most expensive option.

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes Hsdpfxsfz Dkno Al Iel • Ultrasonic screener: Yes • Up to 12 powder injectors Description • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recycling with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injection nozzles with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard • Paint level sensor in the refill box • An acoustic alarm warns the operator when the paint supply in the box is low • The center is connected to the cabin control via the ModBus protocol • Programmable powder suction valve to keep the powder center clean

Tahun pembuatan: 2020, Kondisi: baru, ROMER manipulators are distinguished by their quiet operation. They are capable of handling both simple, widely used processes as well as complex, multi-dimensional tasks. Programming is accomplished via a PLC control system. Suitable for operations with both long and short strokes. The toothed belt drive ensures quiet performance. Equipped with a maintenance-free AC motor. Slim column design saves space. The robust construction of the manipulators guarantees extensive capabilities and high stability. The manipulator features a 7" touchscreen panel or can be operated externally via the ModBus protocol using RJ45 cables. Hjdefz Dmmspfx Al Isl

Tahun pembuatan: 2020, Kondisi: baru, DESCRIPTION The demineralized water station is used for the production of so-called demi water using ion exchange technology. Hodpfefz Dwzsx Al Ijl The station consists of 3 columns: - Strongly acidic cation exchanger operating in the sodium cycle, - Strongly basic anion exchanger operating in the chloride cycle, - Carbon filter Our RDI-2 / RDI-4 type demineralization stations feature fully automatic control heads. The columns are made of AISI316L stainless steel.

Tahun pembuatan: 2020, Kondisi: baru, en-GB Hjdefz I Rmepfx Al Iol

Tahun pembuatan: 2020, Kondisi: baru, en-GB Hsdpfxsfz I R Rs Al Iel

Tahun pembuatan: 2020, Kondisi: baru, en-GB Hsdpfsfz I Sgsx Al Iol

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touchscreen panel • Color tank capacity: 6-7 kg • Air consumption during painting: 15 Nm³/h Hedpfxjfz U Rrj Al Isl • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Up to 12 powder injectors Description • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recycling with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injection nozzles with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard • Paint level sensor in the refill box • An acoustic alarm warns the operator when the paint supply in the box is low • The center is connected to the cabin control via the ModBus protocol • Programmable powder suction valve to keep the powder center clean

Tahun pembuatan: 2020, Kondisi: baru, Pneumatic connection 1" • Controls the 7" color touch panel • Paint tank capacity: 6-7 kg Hsdsfz Dkgspfx Al Isl • Air consumption during painting: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper dye sensor: Yes • Ultrasonic screener: Yes • Powder injectors: up to 12 units Description: • RP-01 pump for refilling paint with fresh paint from cardboard • Two operating modes: paint recovery with mixing or total waste • Sealed fluidizing paint container • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor • Automatic tray refilling with paint from cardboard • Paint level sensor in refill box • An acoustic alarm warns the operator when the cardboard paint supply is low • The center is connected to the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Tahun pembuatan: 2020, Kondisi: baru, • Electrical data: 22 kW, 380-400 V, 50-60 Hz • Theoretical capacity: 12,000 m³/h • 1/4" pneumatic connection • Number of filters: 8 pcs. • Filter area: 160 m² • Automatic filter cleaning • Air consumption max. 12 L, 6-8 bar per shot • 50 L waste container capacity Description • Dust collector equipped with a high-efficiency radial impeller • Two operating modes – Full Power and ECO • The basic weight of the filter media used is up to 260 g/m² • High suction performance with low energy consumption Hedpfx Alsfz Dqfo Ijl • Waste container for easy removal of paint deposits • Inspection door for filter replacement • Each filter features its own solenoid valve

Tahun pembuatan: 2020, Kondisi: baru, Washing machines and ultrasonic cleaning baths for washing, phosphating, chromating, degreasing, and removing paint coatings Hjdpefz Dtzsfx Al Ijl Materials ROMER ultrasonic cleaning systems use stainless steel to provide protection against acids. The tanks feature an additional insulation layer to prevent heat loss and enable faster heating. High-quality materials ensure long service life of the vibrating elements. Heating system The heating elements used in ROMER tanks are made from top-grade materials and high-temperature resistant ceramic components. The heating system ensures high thermal efficiency, with hot water automatically mixing with cold water to heat the entire tank evenly. Ultrasonic transducers The ultrasonic elements used in ROMER cleaning machines are installed in immersion modules, which better reflect vibrations and are replaceable. The ultrasonic frequency range is 20–40 kHz depending on the item being cleaned; lower frequencies are used for large, robust parts and higher frequencies for jewelry, delicate mechanical systems, etc. All transducers are connected by high-temperature resistant cables.

Tahun pembuatan: 2020, Kondisi: baru, • PLC Microprocessor Control • HMI Control Panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – prevents fluid mixing in the event of power failure or sudden shutdown The control box features IP54 technology User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners use sheets that protect against chemicals. The washing walls provide splash protection, and thanks to the closed chemical circuit, the process can be carried out with minimal chemical usage. Due to the small amount of refrigerant required, it is easy to heat and cheaper to purchase. Additionally, you can wash large components that cannot be cleaned in standard tanks. Hodpefz Dvvefx Al Iol Filtration system Thanks to the filtration system, the chemicals operate in a closed loop; three different filters of varying thickness are used to prevent debris and grease from entering the circuit. The chemicals are stored in heated stainless steel tanks and are pumped under pressure to the lance. Washing dimensions The high-pressure cleaner allows for washing large items and optionally features a rotating platform to turn the cleaned items; components can be loaded onto it by forklift or crane. High-pressure pumps The wash system consists of two preparation stages. Both processes have separate sets of pipes, pumps, wires, and spray guns to minimize mixing of agents during phase change. The drains have separate valves to manage liquid return. The wash system is equipped with a logic controller that manages all components. Chemicals are supplied by a highly durable, acid-resistant, multi-stage AISI304 pump (3 kW, up to 20 bar). The rinse phase uses a high-pressure piston pump with ceramic pistons (3 kW), delivering 160–200 bar.

Tahun pembuatan: 2020, Kondisi: baru, DESCRIPTION The so-called partial demineralized water is produced from the demineralized water station using ion exchange technology. The station consists of 3 columns: - Strongly acidic cation exchanger operating in the sodium cycle - Strongly basic anion exchanger operating in the chloride cycle - Carbon filter Our demineralization stations RDI-2 / RDI-4 are equipped with fully automatic control heads. Hsdpfx Alofz I Nhe Isl The columns are made of AISI316L stainless steel.

Tahun pembuatan: 2020, Kondisi: baru, DESCRIPTION The so-called semi-deionized water is produced from the demineralized water station using ion exchange technology. The station consists of 3 columns: Hedpofz I Syefx Al Ijl - Strongly acidic cation exchanger operating in the sodium cycle, - Strongly basic anion exchanger operating in the chloride cycle, - Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Piping The columns are made of AISI316L stainless steel.

Tahun pembuatan: 2020, Kondisi: baru, ROMER® specializes in manufacturing individual technological devices for powder coating systems as well as complete, fully-automatic turnkey coating lines. ROMER® offers heating solutions for the aerospace and automotive industries, serving some of the world’s largest companies. We provide warranty and post-warranty service for all devices we sell, including a complete range of spare parts. A coating applied to a poorly pre-treated surface will peel off or corrode after a short period of time. Ensuring top-quality coating essentially starts with proper degreasing – the foundation of every paint job. Coating on inadequately degreased parts will peel off very quickly. After degreasing, the next step is to abrade the surface coating of the part, which improves paint adhesion—for example, when bending sheet metal—and to apply protective layers, such as a phosphate coating, which further enhances corrosion resistance. There are many solutions to address the aforementioned issues. But what is the most important thing in a powder coating workshop? You might think it’s the applicator, but that’s not the case; even the best applicator cannot help if your oven has poor temperature distribution. Areas where the component is overheated will cause discoloration, and in under-heated areas, the coating will not adhere properly. Above all, the oven is the most crucial aspect. Oil, gas, or electric oven? Not sure how to power your oven? Which method is more cost-effective? What does each method involve? What are the running costs? Hodpfofz Ndyox Al Iel We will try to answer your questions. Depending on customer requirements, conveyor systems can be floor-mounted or suspended from rails. - For user-friendly solutions in manual systems, we recommend suspended transverse overhead conveyors (cross-transfer systems). - In automated systems, chain conveyors are most commonly used, as they operate continuously. These are an excellent solution for companies that require process quality and repeatability. - For companies producing different components simultaneously — for example, using multiple booths with different colors — flexible solutions employing power-and-free conveyors are used. This, however, is the most expensive option.

Tahun pembuatan: 2020, Kondisi: baru, Automatic car wash systems are a solution designed to help you reduce costs, improve quality, and increase the efficiency of surface preparation processes. The automatic car wash station is equipped with a set of spray pumps. It is engineered to minimize fluid carryover between sequential process steps, reducing expenses and enhancing wash quality. This is particularly important because any apparent savings made by using systems without such solutions can result in significantly higher future costs due to increased chemical usage and waste disposal, as well as challenges in maintaining required bath parameters. Our research and development efforts have enabled us to develop a car wash system with an optional parts drying feature, utilizing hot air blown by a series of fans post-wash. The car wash station is fitted with an advanced macro-programming system, allowing users to create custom wash programs—up to 10 steps per tank—tailored to your process requirements. Program steps can be repeated or rearranged as needed. Each tank is represented by its own unique symbol and name for intuitive operation by the user. Optionally, tanks can be equipped with automated bath replenishment systems, which can refill liquid either after each process stage or at the end of the cycle. • Control panel mounted on a swing arm for improved accessibility • PLC microprocessor control • 7'' touchscreen interface • Significantly higher number of nozzles compared to conventional systems • (Optional) Possibility to dry parts after washing • Customizable advanced programming capability • Advanced damper system made of acid-resistant sheet metal, double-secured with limit switches Hsdpfx Aljflmdbe Isl • Monitoring system for tight sealing and opening of the main flap • Dedicated pipework, nozzles, and tanks for each stage to prevent liquid cross-contamination • Intelligent control – prevents fluid mixing in the event of power failure or emergency stop • Fully automatic operation Pricing information is available in the catalog.