Beli Homag Edgeteq S-380 bekas (71.370)

Kondisi: diremajakan ulang (bekas), PC control: Power Control Professional type Software: woodWOP / TopDrill BST No. 2 through-feed motorized conveyor belts (4 x kW?) Gbsdpfxjdz Uk Tj Ai Ajp No. 2 horizontal drilling supports (digital display of position data for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital display of position data for axes) No. 2 drilling units per lower vertical drilling support (2 x 1.5 kW) Various spindles for each lower drilling support unit No. 2 upper vertical drilling supports (digital display of position data for axes) No. 2 drilling units per upper vertical drilling support (2 x 1.5 kW) Various spindles for each upper drilling support unit No. 4 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 36

Kondisi: seperti baru (mesin pameran), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE. The line consists of the following machines: VZ0200A) Infeed station with double loading unit “BARGSTEDT” Model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge-banding machine “HOMAG” Model KFL 525/8/A3/15 VZ0200C) Turnover station (90° LONGITUDINAL-TRANSVERSE) “HOMAG” Model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge-banding machine “HOMAG” Model KFL 526/10/A3/30 VZ0200E) Turnover station (90° TRANSVERSE-LONGITUDINAL) “HOMAG” Model TDL 510/25/12 VZ0200F) Sword brush “WANDRES” Godpjdt Rgvjfx Ai Aebp VZ0200G) Stacking station with double buffer unit “BARGSTEDT” Model TSP 410/D/25/12

Kondisi: sangat baik (bekas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety enclosure for the working head. Full machine safety housing Infeed table (workpiece support) at the entry side. Outfeed table (with conveyor belts) Workpiece feed by no. 3 conveyor belts (feed speed max. approx. 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Installed total power (kW): 99 No. 2 WORKING UNITS (TOP): - (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM): - (SERVO MOTOR X-Y-Z): Gsdogwbbqopfx Ai Aebp No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue supply and dowel insertion (right side) No. 8 injection nozzles for glue supply and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Kondisi: sangat baik (bekas), Complete factory for furniture production, comprising: KZ2207) "BIESSE" FDT - CNC drilling and dowel insertion line, consisting of: Stacking station "RBO" Tornado, 2 x CNC through-feed drilling machines "BIESSE" FDT, 1 x CNC dowel inserting machine "BIESSE" SDT CN, loading station "RBO" Tornado KZ2205) Four-side moulding and edge banding line "HOMAG", comprising: Double stacking stations "ESSE2", 1st double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, 90° transfer unit (longitudinal/transverse) "HOMAG" TD 31/30/12, 2nd double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd 90° transfer unit (transverse/longitudinal) "ESSE2", double loading stations "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC line for drilling, milling, and hardware insertion, consisting of: Carousel loader (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various transfer modules KZ2090) Wide-belt sander (veneer sander) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry CNC with edge banding "MORBIDELLI" Planet HP6018 (2 tables, 6 edge magazines) Godpfx Aoh T Dvtei Asbp KZ2033) Edge banding machine "HOMAG" KAL 310 with automatic infeed and stacking system "ESSE2" KZ2075) Furniture assembly line "TERMOPAK" with through-feed carcass press KZ2203) Sawing line "SALVADOR" (panel cross-cut + splitter) with stacking system "ESSE2" KZ2009) Veneer department (double-knife veneer bundle guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; veneer splicing machine "KUPER", veneer bundle guillotine "TAGLIABUE", etc.) KZ2201) Press line "COLOMBO REMO" (mm 1400x6200) for veneer/laminate applications KZ2215) Automatic panel storage system "ESSE2" Mod. MAGAZZINO No. 3 sawdust filter stations "MION" (1st: 132 kW, 2nd: 55 kW, 3rd: 22 kW) Various vehicles (trucks, vans, etc.) Many other machines (CNC BIESSE Skipper 130, drilling machines VITAP and MORBIDELLI, panel saws, glue application machines, etc.), extraction systems, roller conveyors, shelf systems (wall racks), forklifts, pallet trucks, and more. The machines are still installed at the user's site and can be inspected by appointment.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, de-hu-20240630-01 Gjdpfxjx Aqdce Ai Asbp

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, CNC flexible gantry machine Horizontal throughfeed panel Control: Power Control Open powerTouch, software: WoodWOP (TAPIO-ready) Infeed table (panel support) + outfeed table (panel support) Panel feed by 3 conveyor belts Min. workpiece dimensions (X-Y-Z) mm: 250 x 100 x 12 Max. workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Special side guide system for workpieces with 'sensitive' edges 3 upper vertical pressure devices Powered conveyor belt for waste removal Integrated electrical and control cabinet Total installed power (kW): approx. 47 OPTIONAL: WIRELESS BARCODE SCANNER 2 WORKING UNITS (TOP): (SERVO MOTOR for X-Y-Z axes): 4 drilling supports V15 (4 x 2.3 kW), each with 15 vertical spindles Gsdpfxsx Aqi Es Ai Aebp (total: 60 upper spindles) 3 WORKING UNITS (BOTTOM): (SERVO MOTOR for X-Y-Z axes): 6 drilling supports V32 (6 x 2.3 kW), each with 32 vertical spindles (total: 192 lower spindles) 2 WORKING UNITS (HORIZONTAL): 2 drilling supports H21 (2 x 2.3 kW) with horizontal spindles 21 horizontal drilling spindles (right) + 21 horizontal drilling spindles (left)

Kondisi: sangat baik (bekas), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in-line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Feed belts (number): 2 (adjustable feed speed) Horizontal drilling supports (number): 2 Drilling units per horizontal support (number): 2 Spindles per horizontal drilling unit (number): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (number): 6 Drilling units per lower vertical support (number): 2 Spindles per drilling unit on lower support (number): various Upper vertical drilling supports (number): 2 Spindles per drilling unit on upper support (number): 2 Gbsdeh Ryhnopfx Ai Aop Upper vertical workpiece clamps (number): 6 Chip extraction conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a line) Edge thickness in rolls (min/max) mm: 0.3 – 3 Edge thickness in strips/bands (min/max) mm: 0.4 – 12 Panel thickness (min/max) mm: 8 – 100 Working width (min/max) mm: 240 – 3000 Control system: Power Control PC22 (Windows XP) Software: woodCommander Gedpfx Aijtt Iudj Aebp Feed speed (adjustable) (m/min): 10 – 40 Safety and soundproof cabins Retractable positioning pins, distance (mm): 400 FORMATTING UNIT (per side): Jointing milling unit (2 x 6.6 kW) Spare station Left only: 2 x universal milling units (rotatable) (2 x 6.6 kW) EDGE BANDING SECTION (per side): Gluing unit (Hot Melt glue + pre-melter) E34 Pressure roller track (revolver style) for straight and shaped (softforming) edges, GL sextuple Edge magazine for rolls (No 1 compartment) End trimming unit WK14 (2 x 0.8 kW) 25 m/min (0°–30°) Milling unit (2 x 0.55 kW) 0°–30° Contour copying unit FF12 (4 motors) WD70 20 m/min Profile scraping unit PN20 Finishing unit (flat scraper + buffing unit) FA11

Kondisi: sangat baik (bekas), Double-sided formatting and edge-banding line (half line) with max. working width 2500 mm, equipped with an automatic high-speed handling system: Gbedsrnrrbepfx Ai Aop A) Double-sided loading station (with 2 loading positions) BARGSTEDT TBH 270/D/25/12 B) Transfer unit (longitudinal/transverse), "HOMAG" TDL 310/25/12 C) Double-sided formatting and edge-banding machine HOMAG Model KFL526/9/A3/25 D) Transfer unit (transverse/longitudinal), "HOMAG" TDL 510/25/12 E) Double-sided unloading station (with 2 unloading positions) BARGSTEDT TSH 270/D/25/12 With line control – WOODLINE CONTROL PC52.

Kondisi: diremajakan ulang (bekas), PC control Power Control Software No. 2 infeed motorized conveyor belts No. 2 horizontal drilling supports (digital position display for axes) No. 2 drilling units for each horizontal drilling support (1 x 1.5 kW) No. 11 spindles for each horizontal drilling unit Max. working width (mm): 3000 Min. working width (mm): 250 No. 6 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower drilling supports No. 2 upper vertical drilling supports (digital position display for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the upper drilling supports No. 6 upper vertical workpiece clamps Gsdpovhcbzefx Ai Aobp Chip conveyor Total connected load (kW): approx. 50 / 60

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING AND FORMATTING MACHINE (LEFT) "SOFTFORMING" Edge material (rolls) thickness (min/max) mm: 0.4 / 3 Panel thickness (min/max) mm: 8 / 60 Control / Software: PC 22 / WoodCommander Feed speed (adjustable) m/min: 10 - 40 Side adjustment, aggregate carrier manual mm: 30 - 80 FORMATTING UNITS: Spraying device (for liquid anti-adhesive) Double jointing cutter unit KD 10 (2 x kW 6.6) Milling unit for softforming (2 x kW 1.85) 0°-20° Godpot N H Taofx Ai Aobp Belt sanding unit for straight edge KS 10 (mm 120 x 2100) Free space (mm 700) EDGE BANDING SECTION: Gluing unit (hot melt glue + pre-melter) E34 softforming Pressure roller conveyor G (revolver with 4 positions) for straight and shaped (softforming) edges with over/under trimming knives (in-lay) Edge magazine for rolls E3 (compartment no. 6) End trimming unit HL 84 (2 x kW 0.8) 0°-30° (max 25 m/min) 1st milling unit (2 x kW 0.55) 0°-30° (pneumatic adjustment) 2nd milling unit (2 x kW 0.55) 0°-30° (pneumatic adjustment) Universal milling unit for grooving, rebating, and profiling UF11 (1 x kW 4) 0°-90° Profile scraping unit PN20 (pneumatic) Finishing unit (flat scraper + smoothing unit) FA11

Kondisi: seperti baru (mesin pameran), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE. The line comprises the following machines: O06027A) Loading station with double pickup station "BARGSTEDT" Model TBH 250/D/25/12 O06027B) 1st double-sided sizing and edge-banding machine "HOMAG" Model KFL 525/6/A3/15 O06027C) L-shaped connecting roller conveyor "HOMAG" Model TWL 310/25/12 O06027D) 2nd double-sided sizing and edge-banding machine "HOMAG" Model KFL 526/9/A3/25 O06027E) Connecting roller conveyor "HOMAG" Model TBL 100/25/25 O06027F) Transfer conveyor (on rail) "HOMAG" Model TWL 120/30/02 SS O06027G) Transfer conveyor (on rail) "HOMAG" Model TWL 120/34/02 S Gbedpfx Aiswxvdce Asp O06027H) Unloading station with double buffer station "BARGSTEDT" Model TSP 410/D/25/12

Kondisi: sangat baik (bekas), DOUBLE-SIDED EDGE BANDING MACHINE - Edge thickness (roll) (min/max): 0.3 - 3 mm - Workpiece thickness (panel) min./max.: 12-40 mm - Working width (min./max.): 250-2500 mm - PC control: PC22 Gbjdpfx Aowk Hp Tji Ajp - Top pressure system with driven rubber belts - Adjustable feed fence: 10-32 m/min - Liquid glue unit - Jointing milling unit (vertical milling machine): 2x 4 kW at 9000 rpm - Quickmelt adhesive unit A3 - Pressure zone C (manual adjustment) "A" - Roll holder for 2 rolls - End trimming unit: HL 84 (2x 0.22 kW at 12000 rpm) - Pre-milling unit (2x 0.4 kW at 12000 rpm) - Finishing unit (scraper blade unit + buffing unit): FA11 - Polishing unit

Kondisi: sangat baik (bekas), PC control Power Control Software TOPDRILL BST 500 No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the lower supports No. 4 upper vertical workpiece clamps Gbedpfoivawpsx Ai Asp Chip removal conveyor Total connected load (kW): 20

Kondisi: sangat baik (bekas), Single-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 12 / 80 Edge thickness in strips (min/max) mm 0.4 / 20 Control unit NC21 Feed speed m/min 18 Top pressure powered by V-belt drive Adjustable fence, CNC controlled Jointing milling unit 2 x 3 kW Gluing unit (Hot Melt + Pre-melter) A20 + A34 Gbjdol Iz Tujpfx Ai Aep Edge pressure zone "C" Edge magazine for rolls (compartment no. 1) End trimming unit WK 14 (2 kW, 0.8 to 12,000 rpm), electro-pneumatic adjustment for bevel/straight Pre-milling unit Optimat (2 x 1.5 kW) Milling unit MF20 (2 x 0.55 kW) Profile copying milling unit FF12 (4 x 0.4 kW), CNC (WD40) Free space for profile scraper unit Finishing unit (flat scrapers + polishing unit) FA 10

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Working height: 900 mm Working width: 1,350 mm Belt change side: left Workpiece thickness: 3 – 160 mm Frequency-controlled feed speed: 4 – 20 m/min Abrasive belt dimensions: 2,620 x 1,350-1,380 mm Adjustable abrasive belt blowing device, 5-step adjustable WRD WORKPIECE CLEANING ROTOR Workpiece cleaning unit with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically moves to a 10 mm workpiece thickness and the blowing rotors are activated. After the feed belt has been completely cleaned, the machine returns to its original setting. AAT EXTRACTION SLIDE GATE CONTROL Control of extraction slide gates via the terminal (24 volts DC, without extraction slide gates) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1–3 PC Emergency power supply for belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – underside sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces. Machine is pre-configured for up to two auxiliary units, such as cleaning brush, satin or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatic pressure roller adjustment, profiled steel roller, 240 mm diameter with grit compensation system Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for quick belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, contact-free belt tracking system - Pneumatic belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatic pressure roller adjustment, rubber roller, 240 mm diameter Rubber hardness: 85° Shore with grit compensation system Drive motor: 30 kW Gbodpfsyw Ndmex Ai Ajp Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for mounting a pressure bar - Automatic locking of the sanding assemblies for quick belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, contact-free belt tracking system - Pneumatic belt tensioning with integrated belt edge compensation - Protected storage on the machine for additional sanding tools Drive motor: 22 kW Abrasive belt speed: 2–18 m/s Torque-dependent standby mode to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BAR - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the front and rear workpiece edges - Various sanding inserts, 80 mm width, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – top sanding Wide belt sander with three sanding units for processing wood or wood-based workpiece surfaces Units as above, but additionally: FBM FINISH BRUSH Brush unit with finish brush Brush fill: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Workpiece & Performance Panel formats: • Length: 1,200–1,400 mm • Width: 195 mm • Thickness: 5–12 mm Main line capacities (excerpt): • Multiblade saw feed: 2–48 m/min • Bundle forming: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Portal Loader Vacuum gantry for raw panel feeding (fixed edge right) • Workpiece weight up to 100 kg • Capacity up to 5 cycles/min • Pallet return with light curtain safety system 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Empty pallet supply for feeding • Capacity approx. 12 pallets • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Decor Alignment Station Aligns panels for decorative-appropriate downstream processing 4. Multiblade Circular Saw K34/G/2200 Longitudinal cutting with edge trimming • Feed rate: 2–48 m/min • Max. cutting height: 58 mm • Main motor: 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cutting) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT Cross Cut Station HPp11 Cross cutting in continuous run with hold-down beam • Cutting width 2,200 mm • Pneumatic top pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Layer turning device (2×8 compartments) to separate multiple stacks • Conveyor speed 10–50 m/min 8. BARGSTEDT Angle Transfer (TW) 90° redirection with belt conveyors, feed up to 130 m/min Transfer to profiling line Gbedpfx Aieywxraj Asp Profile Processing (soundproof) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided edge processing • 6 units per side • 6.6 kW per unit • Tool diameter up to 200 mm • Glue joint coloring + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • Identical configuration • Integrated edge sealing 11. Sonolit Soundproof Cabin Enclosure for both HOMAG profile machines • Approx. 12,000 × 7,000 × 3,000 mm Postprocessing 12. BARGSTEDT TTK44/21/14/02 Drying Turner Workpiece turning in continuous operation • Up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Bundling 14. BARGSTEDT TVP40/L/14/02 Bundle Forming Station Automatic bundle forming with first/second quality sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Bundle height up to 80 mm • Capacity 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Cartoning Station Folding and provision of cartons before packaging • Capacity up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Applicator Automatic application of protective paper • Guaranteed up to 10 packs/min 17. Labeling Station Automatic package labeling (format range as per packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrink Wrapping Line Fully automatic film packaging with shrink tunnel • Connected load 36–40 kW • Capacity up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT Belt Conveyor TFB20/017/04 with Air Shower Cooling line after shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Bundle Cross Stacker Automatic stacking onto pallets • Bundles up to 1,400 × 195 × 58 mm • Max. capacity 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layer-by-layer pallet forming with vacuum lifters • Up to 6 cycles/min • Bundle weights up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic empty pallet supply for final palletizing

Kondisi: sangat baik (bekas), Kontrol PC Power Control PC85T Software WoodWOP + TOPDRILL No. 2 Konveyor bermotor tipe thru-feed Gbedjyv Ev Aopfx Ai Aop No. 2 Dudukan bor horizontal (tampilan digital untuk data posisi sumbu) No. 1 Unit bor untuk setiap dudukan bor horizontal (1 x 1,5 kW) No. 21 Spindel untuk setiap unit bor horizontal Lebar kerja maks. (mm): 2500 Lebar kerja min. (mm): 250 No. 4 Dudukan bor vertikal bawah (tampilan digital untuk data posisi sumbu) No. 2 Unit bor untuk setiap dudukan bor vertikal bawah (2 x 1,5 kW) No. 4 Penjepit benda kerja vertikal atas Sabuk pembuang serbuk Daya total terpasang (kW): 35

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), Lini produksi industri HOMAG WEEKE ini diproduksi pada tahun 2007. Lini ini dilengkapi dengan sistem lengkap untuk pemrosesan panel volume tinggi dan edge-banding, termasuk sistem pemuatan otomatis, konveyor rol sentral, beberapa modul edge-banding, serta manipulator portal untuk penumpukan. Cocok untuk produksi kayu yang efisien, memastikan penanganan yang cepat dan presisi. Pertimbangkan kesempatan untuk membeli lini produksi industri HOMAG WEEKE ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Gbsdpfx Ajx D Dq Soi Aep Jenis Aplikasi Produksi Lengkap

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, ketebalan tepi (maks.): 3 mm, kecepatan pemakanan sumbu X: 25 m/menit, kecepatan rotasi (maks.): 12.000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Aggregate 1 Aggregate: Pre-milling Unit Model: WK13 No. of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Aggregate 2 Aggregate: Top Trimming Unit No. of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Aggregate 3 Aggregate: Multifunction Model: FK13 No. of motors: 2 automatic tool change with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Aggregate 4 Aggregate: Top Trimming Unit Model: UF11 No. of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Aggregate 5 Aggregate: Edge Scraper Model: MN21 with NC positioning Edge Processing Aggregate 6 Aggregate: Glue Scraper Model: FA11 Edge Processing Aggregate 7 Aggregate: Brush No. of motors: 2 Motor power: 0.25 kW Edge Processing Aggregate 8 Aggregate: Brush No. of motors: 2 Motor power: 0.25 kW Installed total power: 35 kW EQUIPMENT Spraying unit Gbedpfoytr Hbsx Ai Aop PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photo documentation and descriptive technical/commercial documentation. The buyer has the right to inspect the goods prior to collection and is responsible for installation, securing, and operation of the machine at the destination. External Reference: 6216

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Mesin pelapis tepi diproduksi tahun 2009. HOMAG PROFI KAR310/11/A20/S2 ini dilengkapi dengan sistem pengembalian benda kerja BARBARIC. Pertimbangkan kesempatan untuk membeli mesin pelapis tepi HOMAG PROFI KAR310/11/A20/S2 ini. Hubungi kami untuk detail lebih lanjut. • Kondisi: Bekas Perlengkapan tambahan • Sistem pengembalian benda kerja BARBARIC Gjdpfoyhqi Dox Ai Asbp

Kondisi: sangat baik (bekas), COMPLETE 4-SIDE FORMAT PROCESSING AND EDGE-BANDING LINE, max. working width 2500 mm, equipped with automatic feeding and stacking system, consisting of the following machines: X04004A) Feeding gantry (with 2 loading stations) "BARGSTEDT" TBH 500/D/30/14 X04004B) Rotating device (90° LONGITUDINAL-TRANSVERSE) "HOMAG" Model TDR31/25/12 X04004C) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for final cut) X04004D) Separation station "BARGSTEDT" X04004E) Double-sided sizing and edge-banding machine "HOMAG" Model KFR 620/19/QA/25 X04004F) 1st Drilling machine "WEEKE" Model BST 500 D X04004G) 2nd Drilling machine "WEEKE" Model BST 500 D X04004H) Rotating device (90° TRANSVERSE-LONGITUDINAL) "HOMAG" Model TDR 51/25/12 Gbsdpfxelikvho Ai Aop X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for final cut) X04004M) Stacking gantry (with 2 unloading stations) "BARGSTEDT" Model TSP 420/40/30/12 BA

Kondisi: belum diuji (bekas), Tahun pembuatan: 2005, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 40 mm, ketebalan tepi (maks.): 3 mm, kecepatan pemakanan sumbu X: 35 m/menit, kecepatan rotasi (maks.): 12.000 rpm, jumlah slot dalam magazin alat: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Gsdjyqybuspfx Ai Asbp Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Buffing unit 2 motors Spray device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure application via rubber belt Panel guides with NC positioning Glue tank for EVA hot-melt adhesive Premelting device for EVA hot-melt adhesive Laser system (Model: LaserTec) Roller set for edge pressing with 5 pressure rollers Units mounted on protective devices CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at its destination. External reference: 5321

Kondisi: belum diuji (bekas), Tahun pembuatan: 2007, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 20 mm, model controller: POWER CONTROL PC22, kecepatan rotasi (maks.): 12.000 rpm, Auction extended by one week due to updated technical specifications! TECHNICAL DETAILS Workpiece Dimensions Panel height: min. 12 mm Panel height: max. 60 mm Edge thickness: min. 0.4 mm Edge thickness: max. 20 mm Milling and Gluing Unit Pre-milling unit: available Motor power: 3 kW Speed: 9,000 rpm Adhesive tank for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive Edge Processing Unit 1 End trimming: available Number of motors: 2 Motor power: 0.80 kW Speed: 12,000 rpm Edge Processing Unit 2 Gbjdpfx Aoyqx U Hji Ajp Top and bottom rough flush trimming: available Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge Processing Unit 3 Corner rounding: available Number of motors: 2 Motor power: 0.4 kW Speed: 12,000 rpm Edge Processing Unit 4 Milling unit for rough machining: available Motor power: 4 kW Speed: 9,000 rpm Edge Processing Unit 5 Scraper blade Edge Processing Unit 6 Glue scraper blade Edge Processing Unit 7 Polishing unit: available Number of motors: 2 Motor power: 0.18 kW Edge Processing Unit 8 Belt sanding unit: available Motor power: 1.5 kW Control software: POWER CONTROL PC22 Total connected load: 42 kW

Kondisi: bekas, Tahun pembuatan: 2005, en-001 Gbsdpjyfw Sysfx Ai Aop