Beli Hydrap Tekan Gambar Kolom Ganda bekas (11.404)

Kondisi: bekas, tecdet-press Ndodpfxjw Smuko Afvoa

Kondisi: bekas, Tahun pembuatan: 1964, en-GB_Technical_details_01 Nedou Nfibopfx Afvjda

Kondisi: bekas, Technical Details: Pressing force: 25 t Stroke: 500 mm Installation height (table/ram at top position): 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram advance speed: 0.100 m/s Ram return speed: 0.45 m/s Table size: 630 x 500 x 75 mm Passage in table: Ø 180 mm Clamping surface of ram: 450 x 360 mm Ram bore (pin hole): Ø 32 mm Height above floor level: 710 mm Total connected load: 8.75 kW Approx. machine weight: 2.2 t Approx. dimensions (LxWxH): 1.7 x 1.1 x 2.95 m Nodpfx Ajvc Awxsfvjda Operation via two-hand control panel (and one-hand operation in setup mode) Continuous and single stroke operation

Kondisi: bekas, Detail teknis: Tekanan: 80 t Jarak antar kolom: 880 mm Ketinggian pemasangan: 200 mm Ukuran meja: 880x300 mm Tinggi di atas lantai: 1000 mm Jarak antar kolom: 800 mm Kebutuhan daya total: sekitar 12 kW Berat mesin kira-kira: 2855 kg Kebutuhan ruang: P:1,4xL:1,65xT:1,9 m PRESS EMBOSSING - PUNCHING - Hot press (press pemanas) Area penggunaan: - misal untuk film, plastik, kertas, hardboard, dll. - Ukuran pelat stempel: 600x310 mm Ndsdpfx Afju Icwtsvsa Perlengkapan: - Counter - k - Catu daya 380/415 V / 50 Hz Aksesori: - Pelat penahan untuk matris (600x300x90mm) tidak dapat dipanaskan. Dijual apa adanya.

Kondisi: bekas, Tahun pembuatan: 1991, Technical details: Press force: 40 t Installation height: table/ram top: 450 mm Throat depth: 375 mm Ram stroke: max. 300 mm Table size: 900 x 500 x 85 mm Table opening: Ø 120 mm Height above floor: 900 mm Total power requirement: 15.0 kW Machine weight approx.: 5.8 t Ndodpfeu Nfp Isx Afvja Machine dimensions (LxWxH): 2.3 x 1.45 x 2.40 m The press is constructed with a welded frame, according to structural calculations (manufacturer's specifications). The pump unit consists of three-stage pumps (high-pressure pump, low-pressure pump, and a control pump). Further technical data: - Ram plate size (W x D): 900 x 500 mm - Pin hole in the ram: Ø 40 x 75 mm - Hydraulics: tank capacity approx. 500 liters; operating pressure 275 bar; pump capacity 22.9 l/min - Overrun distance: 7 mm - Overrun time: 58 ms - Single-stroke and automatic cycle - Light barrier (can be optionally repaired) Two-hand operation and/or control panel *

Kondisi: bekas, Tahun pembuatan: 1960, Technical details: Pressure: 10 t Throat depth: 255 mm Maximum ram stroke: 400 mm Ram return speed: 0.180 m/sec Ram advance speed: 0.080 m/sec Nodpfx Aju Nfudjfvsda Installation height (table/ram, top): 630 mm Installation height (table/ram, bottom): 230 mm Table clamping surface: 420 x 400 mm Through-hole in table: 220 mm Ram clamping surface: 200 x 200 x 65 mm Total power requirement: 1.6 kW Machine weight approx.: 1.1 t Machine dimensions (LxWxH) approx.: 1.1 x 0.5 x 2.1 m

Kondisi: bekas, Technical Details: Pressing force: 100 t Installation height (table/ram, top): 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram speed, advance: 200 mm/s Ram speed, return: 200 mm/s Table size (L x W x H): 750 x 560 x 90 mm Table opening: Ø 26 mm Ram clamping surface (W x D): 530 x 400 mm Ram bore (diameter): Ø 50 mm Cylinder diameter: Ø 250 mm Height above floor level: 720 mm Total power requirement: 17.0 kW Approx. machine weight: 5.5 t Ndedpfevc Ax Njx Afvja Approx. machine dimensions (L x W x H): 1.8 x 1.2 x 3.2 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 29.081 h, Fungsionalitas: berfungsi sepenuhnya, CNC control system HEIDENHAIN TNC 640, 15" Main Computer MC Controller Unit CC Keyboard TE 15" TFT color flat panel display with softkeys RAM: 4 GB Hard Drive: 32 GB, at least 21 GB reserved for program storage Input increment / Display step for linear axes: up to 0.1 µm Input increment / Display step for rotary axes: up to 0.0001° Input range: max. 99,999.9999 mm or 99,999.9999° Circular interpolation on 3 axes with rotated machining plane Helical interpolation Linear interpolation on 5 axes Block processing time: 0.5 ms Njdpfxsyrndme Afvsda Ethernet: 2 x 1000BaseT USB: 1 x front USB 2.0, 4 x rear USB 3.0 Handwheel HEIDENHAIN HR510 Axis selection via buttons / softkeys Buttons for continuous axis movement Emergency stop button Magnetic attachment Enabling buttons / deadman’s switch according to CE Travel ranges X-axis / longitudinal axis: 4,000 mm Y-axis / cross axis: 2,500 mm Z-axis / vertical axis: 1,300 mm Feed / Power connection / Pneumatics Max. feed rate with interpolating axes: 40 m/min Installed power: 60 kVA Max. current draw: 150 A Air consumption (pneumatics): 400 Nl/min Operating pressure (pneumatics): 6 bar Clamping plate / Floor plate Integrated clamping plate with leveling units Plate size: 2,500 x 4,000 mm Plate height: 300 mm Load capacity: 10 t/m² T-slot width: 28 mm (H12) T-slot spacing: 250 mm Milling head / Universal milling head Universal milling head with continuous movement on 2 axes 5-axis machining Direct drives for rotary axes Rotary axes as interpolated CNC axes Automatic tool clamping Undercut machining possible up to 10° Integrated cooling for torque motors and spindle bearings C-axis swivel range: +/- 270° A-axis swivel range: +/- 185° Max. rotational speed A-/C-axes: 30 rpm Working torque A-/C-axes: 450 Nm Clamping torque axes: 1,400 Nm Positioning uncertainty A-/C-axes: 8 arcsec Positioning scatter A-/C-axes: 4 arcsec Main spindle Spindle power S1 / S6: 22 / 33 kW Spindle torque S1 / S6: 84 / 128 Nm Max. spindle speed: 18,000 rpm Constant power: 2,500 - 18,000 rpm Constant torque: 10 - 2,500 rpm Tool holder: HSK-A63 DIN 69893 Rigid tapping for motorized spindle Software / Calibration Dynamic RTCP software AUTOCAL software for automatic calibration 3D Form Inspect M&H software Software for measurement of 3D shapes, tools, molds, and dies Measurement program creation directly via coordinate points / surface points Vibration / Collision monitoring Sensor for vibration detection Detection of collisions and excessive oscillations on 3 axes Response time approx. 1 ms Electronic interface for functionality check Tool changer Tool changer with arm for tool change Overlapped-wheel design Fully enclosed for operator safety Tool stations: 80 Max. tool diameter: 75 mm Max. tool diameter with adjacent slots free: 125 mm Max. tool weight: 10 kg Max. tool length: 600 mm for 40 tools Max. tool length: 250 mm for remaining 40 tools Tool type: HSK-A63 DIN 69893

Kondisi: bekas, Tahun pembuatan: 1991, 1 Nodpfjyq Swhsx Afvsda

Kondisi: bekas, Tahun pembuatan: 1976, Pressing force 20 t Arm reach 185 mm Stroke 100 mm Table clamping surface 380 x 350 mm Installation height 250 mm Table height above floor 840 mm Total power requirement 4 kW Ndodpfx Astqqwujfvoa Machine weight approx. 1.3 t

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.360 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan spindel (maks.): 15.000 rpm, model controller: Heidenhain TNC430 PA, Submission of a bid constitutes an obligation to collect the item within calendar week 25! TECHNICAL DETAILS Travel Range X-axis: 3,000 mm Travel Range Y-axis: 2,360 mm Travel Range Z-axis: 1,000 mm Feed Rate X-axis: 20 m/min Feed Rate Y-axis: 20 m/min Feed Rate Z-axis: 20 m/min Rapid Traverse X-axis: 20 m/min Rapid Traverse Y-axis: 20 m/min Rapid Traverse Z-axis: 20 m/min Max. Spindle Speed: 15,000 rpm Torque: 57 Nm Spindle Power: 18 kW Clamping Table (L x W x H): 4,500 x 2,000 x 400 mm T-slots, longitudinal: 18H12 T-slot spacing: 250 mm Tool Holder: HSK 63 F Ndedpoy Sxkrofx Afvea Tool Clamping: hydraulic MACHINE DETAILS Control: Heidenhain TNC430 PA Supply Voltage Type: Three-phase Power Requirement: 20 kW Frequency: 50 Hz Voltage: 400 V Main Fuse: 63 A Dimensions & Weight Required Space (machine without control cabinet, L x W x H): 6,000 x 3,500 x 4,050 mm Total Weight: 15,000 kg EQUIPMENT Steplessly adjustable spindle speed Tool changer TT140 touch probe Note: Machine is delivered without enclosure. The zero-point clamping plates shown in the images and other accessories are not included in the scope of delivery.

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, MBZ-72-80-3 Nedpfey S Hazjx Afvsda

Kondisi: bekas, Tahun pembuatan: 1970, nomor mesin/kendaraan: 120895, EN-TRANSLATION-001 Nedjfx Hv Hjpfx Afvsda

Kondisi: bekas, Tahun pembuatan: 1987, nomor mesin/kendaraan: 5347, Pressure: 10 t Ndjdpfx Afocxxygjvja Throat depth: 180 mm Stroke: 8-60 mm Strokes per minute: 180 spm Table surface: 400 x 340 mm Table height above floor: 935 mm Table through-hole: 80 mm Ram adjustment: 40 mm Ram surface: 180 x 110 mm Total power requirement: 1.1 kW Machine weight approx.: 0.6 t Space requirement approx.: 1.2 x 1.5 x 2.0 m - Two-hand and foot operation - Control cabinet

Kondisi: bekas, Tahun pembuatan: 1979, Pressure: 64 t Ndsdpfx Ajcxxmfofvoa Outreach: 315 mm Stroke: 8–100 mm Strokes per minute: 140 spm Table size: 820 x 630 mm Table height above floor: 800 mm Ram stroke adjustable min. / max.: 8–100 mm Ram adjustment: 63 mm Total power requirement: 7.5 kW Machine weight approx.: 4.8 t Space requirements approx.: 1.45 x 1.70 x 3.10 m

Kondisi: bekas, Tahun pembuatan: 1967, Pressure: 80 t Outreach: 280 mm Stroke: 20-120 mm Table width: 710 mm Nsdpecxxrhefx Afvsda Table depth: 560 mm Ram dimensions: 560 x 355 mm Ram adjustment: 72 mm Strokes per minute: 125 spm Total power requirement: 9.5 kW Machine weight approx.: 4.4 t UVV (accident prevention regulation)

Kondisi: bekas, Pressure: 70 t Throat depth: 250 mm Stroke: 10 - 120 mm Table size: 750 x 500 mm Njdpfecxxttox Afveda Installation height: 350 mm Ram adjustment: 350 x 200 mm Strokes per minute: 50 spm Passage: 310 x 370 mm Total power requirement: 5 kW Machine weight approx.: 3.5 t Space requirement approx.: 1.3 x 1.4 x 2.5 m - Tiltable single-column eccentric press - Tie-rod design with UVV-compliant movable safety guard - Pneumatic clutch - Four-way guided ram - Separate control cabinet - Central lubrication - Electric two-hand control - Emergency stop safety switch

Kondisi: bekas, Tahun pembuatan: 1953, nomor mesin/kendaraan: 66/53, Pressure: 36 t Throat depth: 280 mm Stroke: 6 - 82 mm Ndedpfscxxwcjx Afvsa Ram adjustment: 51 - 13 mm Strokes per minute: 6-82 spm Table area: 530 x 480 mm Through hole in bolster plate: Ø 140 mm Bolster plate thickness: 70 mm Ram area: 200 x 200 mm Clamping plate: 530 x 450 mm Space requirements approx.: 1.0 x 1.65 x 1.80 m WEINGARTEN flywheel eccentric press with UVV safety guard, manufactured by DITTMER, model PSK 103/B, year 1978; additional clamping plate 530 x 450 mm (plate thickness: 70 mm), manual central lubrication, height-adjustable table (+/- 180 mm)

Kondisi: bekas, Tahun pembuatan: 1970, Pressure: 63 t Throat depth: 250 mm Stroke: 8–100 mm Table depth: 710 mm Ndjdpfxecxxx Ho Afvoa Table width: 500 mm Ram dimensions: 450 x 280 mm Ram adjustment: 63 mm Stroke rate: 140 strokes/min Total power requirement: 7 kW Machine weight approx.: 3.5 t

Kondisi: bekas, Tahun pembuatan: 1994, Pressure: 100 t Throat depth: 280 mm Ram stroke: 300 mm Table size: 1000 x 600 mm Ram clamping surface: 600 x 400 mm Total height above floor: 300 mm Overall width: 1200 mm Operating voltage: 380 V Approx. machine weight: 4 t 100 t Hydraulic Press, Sahinler brand Model: GHP 100 Hydr Press force: 100 t Ndedpfjt Hmk Hjx Afvsa Table size: 1000 x 600 mm Ram size: 600 x 400 mm Additional ram plate approx. 900 x 600 mm

Kondisi: bekas, Tahun pembuatan: 1997, Pressure: 40 t Throat depth: 280 mm Ram stroke: 8–120 mm Nsdpfxecxxmgo Afvoda Strokes per minute: 120 spm Throat depth: 280 mm Clearance: 350 mm Shut height: 270 mm Table size: 710 x 565 mm Ram area: 500 x 280 mm Total power requirement: 2.2 kW Machine weight approx.: 3.2 t

Kondisi: bekas, nomor mesin/kendaraan: 52 / 519, Spindle diameter: 90 mm X-travel: 700 mm Ndedpfxeh Ra Sts Afvsa Column distance: 900 mm Longitudinal movable table size: 770 x 900 mm Table longitudinal travel (X-axis): 700 mm Y-travel: 500 mm Z-travel: 1100 mm Table feed range: 15 - 280 mm/min Rapid traverse Z-axis: 530 m/min Spindle bore diameter / taper: MT4 (Morse) mm Max. spindle bore diameter: 230 mm Max. spindle stroke: 170 mm Spindle speed, lower range: 10 rpm Spindle speeds, upper range: 2000 rpm Vertical feed of the spindle head: 0.02 - 0.2 mm/rev Number of feed rates: 6 Main spindle power: 3 kW Total power requirement: 4.2 kW Approx. machine weight: 4 t Required space approx.: 1.9 x 2.2 x 2.4 m

Kondisi: baru, Tahun pembuatan: 2024, 7305 Ndedpjwiry Ijfx Afvja

Kondisi: bekas, Tahun pembuatan: 1985, Technical details: Pressure: 3 t Throat depth: 150 mm Stroke length (max.): 280 mm Installation height with bolster plate plunger/top: 355 mm Distance table/ram: 355 mm Clamping plate on table: 280 x 290 x 50 mm Through-hole in table: Ø 100 mm Ram speed (advance): 0.1 m/s Ram speed (return): 0.3 m/s Ram bore: Ø 20 x 40 mm Height above floor: 800 mm Total power requirement: 1.5 kW Machine weight approx.: 370 kg Dimensions approx. (LxWxH): 0.8 x 1.2 x 1.9 m The C-frame press is mounted on a base table (welded sheet steel). Operation is via foot switch. The press has been retrofitted: - Holder for film with punching device and automatic feed (pneumatic) - FIBRO punching device (plastic disc with Ø 47.5 mm for punching) - Foot operation Nsdeu Nfvbepfx Afvjda

Kondisi: bekas, Tahun pembuatan: 1983, Technical details: Pressing force: 160 t Throat depth: 360 mm Ram stroke – max.: 500 mm Distance table to ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through openings in table: 4x Ø 62 mm Ram advance speed: 200 mm/s Ram return speed: 125 mm/s Ram surface: 450 x 850 mm Pin hole in ram: Ø 49 mm Height above floor: 810 mm Total connected load: 17 kW Machine weight approx.: 7,200 kg Machine dimensions (LxWxH) approx.: 2.1 x 1.4 x 3.4 m Nsdpsu Nfvuofx Afvjda Manual counter In stock