Beli Almab Garis Sortir Papan Horizontal bekas (8.817)

Kondisi: baru, Model designation Njdjgvkafepfx Al Tslh Shark 332-1 SXI evo

Kondisi: baru, Model designation: Shark 282 CCS Nledjgvkbcspfx Al Tsh

Kondisi: baru, Model designation Nsdegvkctepfx Al Tslh Shark 282 SXI evo

Tahun pembuatan: 2024, Kondisi: baru, The plant is available immediately! • Suitable for round timber diameters from 10 cm up to 50 cm • Suitable for round timber lengths from 2 to 6 m • 4-strand infeed conveyor, 6 m long Nlsdpfxogvu Als Al Toh • 4-strand singulator, 2 m long • 4-strand separator, 2 m long • Conveyor with M 112 pin chain featuring protective rollers • Log haul with 2-inch chain and pushers • Special low-noise pushers for quiet transport • Measurement system with 1 mm resolution • Measuring frame with auxiliary heating and sun protection roof • Display of all operating states on a 17” monitor • Fully automatic process control • Various storage options and sorting criteria • 5 ejectors (right/left) driven by SEW gear motors with brake • Spacious, thermally insulated operator cabin • 4 surveillance cameras with flat-screen monitor • Control cabinet including all wiring • Sorting criteria by arrangement

Kondisi: bekas, Comec FM/OV2000 CAF Horizontal and Vertical Boring Machine with Vertical Saw Units. - 3 vertical saw units - 2 vertical boring heads Nsdpfx Alot Hzhtj Telh - 2 horizontal boring heads - 2 end boring heads - Plus 1 extra spindle

Kondisi: bekas, Tahun pembuatan: 1990, Panjang penggerindaan 900 mm Lebar penggerindaan 510 mm Tinggi benda kerja 400 mm Luas permukaan penjepitan meja 800 x 400 mm Gerakan meja memanjang maks. 980 mm Kecepatan meja – dapat diatur secara kontinu – 1 - 35 m/menit Dimensi cakram penggerinda 355 x 51 x 127 mm Nodpetqqm Ajfx Al Tslh Gerakan meja melintang 460 mm Umpan melintang 1 - 40 mm/langkah Umpan tegak lurus otomatis 0,005 - 0,04 mm/langkah Kecepatan cepat tegak lurus 0,5 m/menit Kecepatan putar poros penggerinda 1450 putaran/menit Penggerak poros penggerinda 5,6 kW Beban meja maks. 1000 kg Dimensi mesin P x L x T 3,2 x 2,17 x 2,47 m Total kebutuhan daya 10 kW Berat mesin sekitar 4,4 ton Aksesori: Pelat magnet 800 x 400 mm, berbagai cakram penggerinda dengan dan tanpa flensa, peralatan penggerindaan basah dengan filter pita kertas.

Kondisi: baru, Cutting range at 90 degrees: round 510 mm Cutting range at 90 degrees: square 480 mm Cutting range at 90 degrees: rectangular 610 x 450 mm Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 820 mm Total power requirement: 3.0 kW Machine weight: approx. 2.3 t Space requirement: approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic operation and up to 60° to the left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed and automatic length compensation Sensor on the saw blade for automatic adjustment of the sawing stroke Fully automatic control of saw frame and clamping device Hydraulic unit with automatic pressure shut-off in idle mode Mechanical chip removal brush, feed vice opens on both sides Minimum rest piece length: 100 mm Modern CNC control, freely programmable for multiple sawing jobs with various cutting lengths and quantities Automatic feed unit 500 mm via ball screw with incremental feed and automatic length compensation. Adjustable for cut lengths from 25 to 9,999 mm Fully hydraulic control of saw frame and clamping devices Preselection of 3 different material feed speeds Visualization of the entire work process with simple data entry Njdpfxjfu Nbbo Al Tslh

Kondisi: baru, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 820 x 610 mm Cutting capacity at 45°: round 550 mm Cutting capacity at 45°: square 550 mm Cutting capacity at 45°: flat 550 x 600 mm Cutting capacity at 60°: round 370 mm Cutting capacity at 60°: square 370 mm Cutting capacity at 60°: flat 370 x 600/450 mm Nodpfsfg E Hmox Al Telh Saw blade length 7260 x 41 x 1.3 mm Blade speed 15 - 100 m/min Table height 800 mm Total power requirement 5.5 kW Machine weight approx. 4.8 t Space requirement approx. 5.85 x 3.7 x 2.7 m 2-column double miter bandsaw for fast cutting with pusher system P15, option P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic miter adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system". An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in combination with a reliable hydraulic brake with large radial center positioning. The work table is mounted on high-quality preloaded bearings which ensure very smooth rotation. CNC control A CNC control system allows programming of up to 90 cutting programs with different cut lengths, quantities, and miters. Double-sided clamping positioning system The B&S pusher system, feeding and positioning unit, features "double-sided opening grippers" which are hydraulically operated. This guarantees secure gripping and transporting of materials and bundles that may deviate from the ideal shape. The pusher system is built as a separate unit and runs on ball-bearing linear guides, a ground rack, and is powered by a frequency-controlled, robust geared motor.

Kondisi: baru, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Blade speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx. 8.45 t Dimensions L x W x H: 4.485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer premium sawing technology and top performance for cutting special steels. • The welded machine frame and steel saw frame meet all cutting requirements and eliminate vibration and noise. • The chip conveyor is hydraulically driven with adjustable speed. • All machine movements (saw frame, vice, feed, saw blade guides) utilize modern linear guides capable of high static and dynamic load capacity, ensuring minimal sliding friction. Nlsdjfg E Hpepfx Al Tsh • Another key feature is the roller system for material positioning, hydraulically driven. These rollers move at a right angle to the material, allowing optimal clamping. • Thanks to adjustable blade height control, the operator can precisely position the band near the top edge of the material. After cutting, the blade automatically returns to its previous position. Alternatively, the ‘remain’ function can be selected to leave the blade at the lower position. During the cutting cycle, the software compares sawing load with preset values to allow the system to stop in case of irregularities. • The saw blade is cleaned by two adjustable steel brushes with hydraulic drive. • The hydraulic unit with filter and pressure gauge ensures particularly smooth operation at a constant pressure. • Precision-ground carbide inserts for saw blade clamping, complete with hardened, adjustable lateral guide rollers. The adjustable blade guide automatically moves as close as possible to the material. • The saw blade is tensioned by a hydraulic cylinder, controlled by machine software. Tension is automatically released after a preset time in idle mode or after a cutting cycle. • Automatic version with CNC control available for X-TECH 900 / 1200 models, with 500 mm feed length for high-production series. • The material is supported by a table with seven rollers. These are driven by a hydraulic orbital motor, ensuring precise placement even at maximum load. • All guided movements run on four recirculating ball guides with high capacity for static and dynamic loads; significantly reduced feed friction. Induction-hardened, ground prismatic guides. Price on request.

Kondisi: baru, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band length: 4640 x 34 x 1.1 mm Table height: mm Band speed: 15 - 115 m/min Njdpfx Aefg E Hzsl Telh Total power requirement: 4.0 kW Machine weight approx.: 2.8 t Dimensions L x W x H: 3.1 x 2.2 x 2.2 m Shark 350 NC HS 5.0, automatic hydraulic band saw with dual-column design for 0° cuts on solid materials and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350x350 mm. Standard features include: + Driven chip conveyor, installable on either the right or left side of the machine. + Adjustable clamping pressure for the vises. + Feed system with vertical rollers for lateral material support. + Numerically controlled band saw, which can also be operated semi-automatically, featuring the new MEP 50 control unit, developed specifically by MEP for automatic machines, based on Windows CE. + “Clean cut” cycle: the feeder retracts the workpiece to avoid scoring the cut surface when the band lifts at the end of the cut. + Fieldbus communication system with dual microprocessor and serial connection. + User interface with 7” touchscreen display and mechanical buttons, allowing for operational control of the saw, ensuring reliable, simple, and intuitive operation as well as real-time monitoring of all cutting parameters.

Kondisi: baru, Cutting diameter: 250 mm Saw band length: 2950 x 27 x 0.9 mm Table height: approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.37 t MEP Sawing Machine: Saw band frame, vice assembly, and base made of durable cast iron High-precision degree marking on the cast iron structure Electrical system (with fully labeled wiring and 24 V low-voltage system) Control handle IP 55 for manual cycles (where applicable) Rotating chip brush for the saw band Nledpofg E H Ijfx Al Toh Quick-approach closing unit with vice Precise end stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Tools, operating instructions, and spare parts ordering manuals in the user’s language SHARK 281 in manual operation and SHARK 281 CCS in manual operation, but with cutting through automatic downfeed by the saw head’s own weight. CCS (Cut Control System) with (A) switch for manual and automatic cutting, (B) adjustment of cutting speed, (C) hydraulic brake with reservoir, (D) end stop for band halt. CCS is optionally available for previously delivered machines as well. Quick-adjust vice Hydraulic converter for band tension display Electric coolant pump for cooling and lubricating the saw band and maintenance-friendly coolant tray above the machine base In versions with pneumatic vice (MA), opening and closing of the vice is done via manual valve (pedal control available as an option).

Kondisi: baru, MSS2024-001 Nsdpfjfg E H Nex Al Tjlh

Kondisi: baru, Cutting diameter: 250 mm Cutting range at 90 degrees, flat: 280 x 220 mm Cutting range at 90 degrees, square: 220 x 220 mm Vice width: 285 mm Cutting speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 485 kg Space requirement: approx. 1700 x 1000 x 1800 mm Electrohydraulic Semi-Automatic Bandsaw SHARK 282 SXI EVO with semi-automatic/dynamic and manual modes, features a MEP-28 controller for mitre cuts from 45° right to 60° left. Semi-automatic function: At cycle start: - Vice closes and motor starts - Saw head lowers for the cut - Motor switches off - Saw head lifts - Vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand button.) Some features: - New centralised control panel mounted on a swing arm, allowing the operator Nedpfxsfg E H Ss Al Tjlh to operate easily from any working position. - Low-voltage control unit: - Polyester membrane keypad with thermoformed raised buttons and operation confirmation signal. - Display shows: * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Input and output status * Cut counter * Cutting time elapsed * Saw band motor current draw * Saw band tension * Saw band speed * Numeric display of head position - Manual cycle switch handle, IP55 rated, 24 V. - Complete program of all special cutting cycles. - Ability to determine other special cutting cycles for specific applications. - State-of-the-art hydraulic control unit, highly efficient with low energy consumption. - Large working surface with turntable on roller bearings, 265 mm with pre-loaded thrust bearing, mounted. - Dual blade speed (36/72 m/min.) with control - Prepared for installation of an electronic inverter for variable blade speed adjustment from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel to suit cutting material. - Clamping device laterally adjustable left/right, with quick-release vice. - Manually operated blade tension control with display on the screen via electronic transducer. - Machine base with extendable coolant tray. - Electric coolant pump for blade cooling and lubrication. - Ready for installation of minimum quantity blade lubrication kit (optional), in addition to standard emulsion oil lubrication. - Chip removal brush. - The machine is designed for pallet truck transport. - Length stop for repeated cuts of same length - Material support arm with roller, for attaching loading platform - Bi-metal saw blade for solid and profile material. - Tools and user manual in the applicable language.

Kondisi: baru, Cutting diameter 300 mm Saw blade length 3320 x 27 x 0.9 mm Blade speed 40/80 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 670 kg Operating mode in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering occurs via the unit’s own weight, is counterbalanced by a spring, and adjusted with a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the necessary position for material feeding. Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch prepared for padlock, switch or speed selector switch, emergency stop, thermal-magnetic protection, low voltage system 24 V) Electronic blade tension gauge with digital display Manual vice with quick locking Nledefg E H Topfx Al Teh Base frame with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional accessory) Electric coolant pump for blade cooling and lubrication Chip removal brush Adjustable precision stops for repeated cuts of equal length Machine suitable for pallet truck transport Bimetal saw blade for solid and profile material Tools and operating instructions included.

Kondisi: baru, Cutting diameter: 330 mm Cutting range at 90 degrees, flat: 510 x 320 mm Cutting range at 90 degrees, square: 320 x 320 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Nledpfxsfg E Ibj Al Tjh Weight: 670 kg Semi-automatic, electro-hydraulic bandsaw machine for cuts from 60° left to 60° right. Versatile machine with a blade size of 4640 x 34 x 1.1 mm, suitable for cutting pipes, profiles, and beams up to a maximum cutting capacity of 510 x 320 mm at 0°. The operator console is mounted on a pivoting arm, allowing comfortable and safe operation from any position. Electronic inverter for stepless regulation of the blade speed from 15 to 100 m/min. Large rotating table with a diameter of 280 mm, finely engraved with a precise scale, easily adjustable and mounted.

Kondisi: baru, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350 x 200 mm Saw band dimensions 3375 x 27 x 0.9 mm Band speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.61 t Space requirement approx. 1.5 x 1.75 x 1.9 m Double-mitre metal band saw with AutoCut function - Mitre cuts up to 60° left and 45° right - Ball-bearing rotary table - Side-shiftable vice Nledpsfd Abasfx Al Tsh - Heavy-duty, large material support - Automatic cooling system Image shows semi-automatic version.

Kondisi: baru, Cutting diameter: 220 mm Saw blade length: 2450 x 27 x 0.9 mm Table height: 915 mm Nsdefgyh Nopfx Al Telh Band speed: 35 + 70 m/min Connection voltage: 400 V Cutting capacity at 90 degrees: round 220 mm Cutting capacity at 90 degrees: square 210 x 210 mm Cutting capacity at 90 degrees: flat 230 x 185 mm Total power requirement: 1.2 kW Machine weight approx. 240 kg Required space approx. 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw designed for mitre cuts from 0° to 60° to the left. After the cut, the machine stops automatically via a safety limit switch. The lower travel can be steplessly adjusted by means of a hydraulic system. Raising the saw arm after the cut can be performed to any desired position, where it will remain securely in place. The Z241/R comes equipped with: Hydraulic cylinder, emulsion pump, eccentric clamp, base frame, saw band, 400V plug (16A). The machine is delivered fully assembled and ready for immediate operation.

Kondisi: baru, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 0.42 t Nledpfx Alefgyh Tj Tjh Double-mitre metal band saw, GBS 250 Super AutoCut - Mitre cuts up to 60° to the left and 45° to the right - Ball-bearing mounted rotary table - Quick-release vice - Heavy-duty, large material support - Automatic coolant system

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 450 x 320 mm Saw band length 4250 x 34 x 1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre bandsaw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitres left + right 60° without machine conversion · 34 mm saw band width · Large, ball-bearing turntable work support · Saw band guides positioned via extra wide linear guides · Powerful, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Freestanding control panel, safe and ergonomic · Storage space for bands and consumables · Cutting pressure regulator, feed regulator · Fully hydraulic vise · Super fast clamping (front loading) · Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp the material 2. Start the saw 3. Rapid lowering to material start or, for serial cutting, begin cutting immediately 4. Switch off saw band 5. Raise saw frame just above material 6. Open vise Nedpfxsfgyico Al Tslh Optimal, material-independent cutting results thanks to fine adjustment of the saw frame using: * Pressure control valve (cutting pressure force) * Feed control valve (speed) * Switch with pictograms, simple and clear to operate

Kondisi: baru, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Saw band length: 5850 x 41 x 1.3 mm Band speed: 15 – 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight approx. 4.45 t Space requirement approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for fast cutting, K-tech 800H with pusher system P 15. P 30 (optional) Fast, smooth, and ergonomic cutting Specially developed for cutting profiles and beams as well as solid material. Material clamping is carried out vertically on the feed and discharge sides. From the K-tech 800 H, the machine is equipped as standard with an additional horizontal vise. Hydraulic saw frame lowering, material positioning, and the pusher system are CNC-controlled in coordination. Nedofgyifepfx Al Tolh The machines are equipped as standard with the environmentally friendly "B&S Clean Cut cutting system" with minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC Control A CNC controller enables programming of up to 90 cutting programs with different cut lengths, quantities, and mitres. The B&S pusher system, feeding and positioning system, is equipped with "double-sided opening gripper jaws" which are hydraulically operated. This ensures secure gripping and handling of materials and bundles that deviate slightly from the ideal shape. The pusher system is built separately and runs on ball-bearing linear guides, ground rack, and is powered by a frequency-driven, robust gear motor.

Kondisi: baru, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Saw blade dimensions: 8140 x 54 x 1.6 mm Blade speed: 15 - 90 m/min Nlodpfx Asfgyigjl Tsh Table height: 855 mm Total power requirement: 7.5 kW Machine weight: approx. 4.96 t Space requirements: approx. 5.7 x 4.0 x 2.75 m 2-column band saw for fast cutting, K-tech 1200H with pusher system P 30. P 60 (option) Fast, smooth, and ergonomic cutting Specially developed for cutting profiles and beams as well as solid materials. Material clamping is performed vertically on the infeed and outfeed sides. Starting with the K-tech 800 H, the machine comes standard with an additional horizontal vice. The interplay of the hydraulic saw frame downfeed, material positioning, and the pusher system is CNC controlled. The machines are equipped as standard with the environmentally friendly "B&S-Clean Cut Cutting System" with minimum quantity lubrication. This reduces cleaning time and conserves resources. CNC control A CNC controller allows programming of up to 90 cutting programs with different section lengths, quantities, and mitre cuts. The B&S pusher system, feed and positioning system, features "double-sided opening grippers" which are hydraulically operated. This ensures secure gripping and transportation of materials and bundles that may deviate slightly from the ideal shape. The pusher system is built separately and is guided by ball-bearing linear guides, ground rack, and frequency-driven robust gear motor.

Kondisi: diremajakan ulang (bekas), RISCO + TOWNSEND ID.NO. 0941 Nlsdpfx Ajf T R Dzel Toh Risco-Linie mit Townsend RT 74 Wurstlinie mit sehr hoher Kapazität. In gutem Zustand, direkt aus der Produktion entnommen.

Kondisi: baru, Cutting range at 90°: round 305 mm Cutting range at 90°: square 260 mm Cutting range at 90°: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 18 – 100 m/min Table height 880 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.84 t Space requirements approx. 1.85 x 1.9 x 2.0 m Fully automatic mitre band saw • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made in one casting, exceptionally quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover • Excellent access to saw, material, and feed unit • Folding safety cover • Fine feed adjustment • Semi-automatic cutting! • CNC control for optimized workflows Entry of various parameters such as quantities and material lengths, automatic groove calculation • CNC control for 10 different sawing programs with 99 sub-programs for various lengths and quantities, e.g. 1 sawing program with multiple section lengths Nlsdjupw R Aspfx Al Toh • Automatic feed unit (CNC) via ball screw with incremental feed and automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, remnant length 170 mm. Includes: - Micro-spray device - Leveling elements

Kondisi: baik (bekas), Tahun pembuatan: 2014, 10553 Manufacturer: HANDTMANN / BAVIUS Model: HBZ Trunnion 120 Year of manufacture: 2014 Control type: CNC control CNC: Heidenhain TNC 640 Location: Halberstadt Country of origin: Germany Machine No.: 200XXXXX X travel: 1,270 mm Y travel: 1,100 mm Z travel: 900 mm Table height: Ø 1,200 mm Table load capacity: 2,000 kg Max. tool weight: 20 kg Max. tool length: 90 x 200 / 24 x 400 mm Max. tool diameter: Ø 130 mm Tool holder: HSK 100 Number of tool stations in magazine: 40 Tool magazine capacity: 140 pcs. Spindle speed – infinitely variable: 14,000 rpm Max. torque: 15,000 Nm Rapid traverse X axis: max. 60 m/min Rapid traverse Y axis: max. 60 m/min Rapid traverse Z axis: max. 60 m/min Machine length: 7,500 mm Machine width: 5,500 mm Machine height: 3,500 mm Machine weight approx.: 26 t Rapid traverse C-axis: max. 25 rpm Rapid traverse A-axis: max. 20 rpm A-axis (swivel axis): -30 / +120° C-axis (rotary table axis): 360° Additional information: Njdjzc D Aaspfx Al Tslh - Horizontal machining center, Y-axis arranged vertically - Machine frame constructed as a welded structure - Mounted on height-adjustable precision wedge shoes - Chip tray with coolant system for external flood cooling Capacity: approx. 400 liters, with fresh water pump, low-pressure circuit, approx. 40 l/min at approx. 5 bar, and rinsing nozzles at the Z-axis and/or the spindle - Complete safety enclosure - Stainless steel internal lining - Work area lighting - Manual loading door to work area with polycarbonate safety glass and additional glass pane - Lateral viewing window to work area with polycarbonate safety glass and additional glass pane - Maintenance area freely accessible - Hollow shank taper HSK 100 - Tool clamping via springs, tool release hydraulic - Tool clamping control - Taper cleaning - Including spindle orientation Machine can be inspected under power by arrangement.

Kondisi: baik (bekas), Tahun pembuatan: 2009, Nomor Referensi: 10662 Produsen: STARRAG HECKERT Tipe: HEC 1250 Athletic Tahun Pembuatan: 2009 Jenis Kontrol: CNC Kontroler: Siemens 840D Lokasi Penyimpanan: Halberstadt Negara Asal: Jerman Nomor Mesin: 221XXX Rentang Pergerakan Sumbu X: 2200 mm Rentang Pergerakan Sumbu Y: 1600 mm Rentang Pergerakan Sumbu Z: 1850 mm Diameter Spindel: 100 mm Berat Maksimum Alat: 35 kg Panjang Maksimum Alat: 800 mm Diameter Maksimum Alat: 250 mm Luas Permukaan Penjepitan: 1000 x 1250 mm Majalah Alat dengan: 60 buah Nljdpfxez Adt Rj Al Toh Torsi Maksimum: 25.000 Nm Kecepatan Pemakanan Variabel: 40.000 mm/menit Kecepatan Cepat: 40 m/menit Jumlah Palet: 2 Waktu Penggantian Palet: 47 detik Berat Mesin Kira-kira: 26,5 ton Ketidakpastian Posisi P: 0,008 mm Deviasi Posisi Pa: 0,006 mm Sebaran Posisi Ps: 0,005 mm Putaran Maksimum Meja: 10 RPM Informasi Tambahan: - Konstruksi: Desain rangka yang simetris secara termal dengan pengaliran serpihan yang optimal untuk pemesinan pengecoran. - Area Aplikasi: Teknik mesin, teknik energi, serta pemesinan rumah roda gigi besar dan komponen mesin. - Spindel motor yang kuat (tergantung varian, hingga sekitar 82 kW) untuk pemesinan berat. - Starrag Heckert HEC 1250 Athletic (tahun pembuatan 2009) adalah mesin besar modular 4-sumbu yang bertenaga untuk pemesinan lengkap yang presisi dari benda kerja berat. Mesin dapat diperiksa dalam kondisi menyala setelah koordinasi.