Beli Ona Ona Ke500 bekas (1.544)

Kondisi: bekas, SincoTec Type: Exciting Mot Resonance Test Bench POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance test bench is designed as a two-mass oscillator. It consists of an oscillation head, which is excited by an unbalanced motor driven by a frequency-controlled asynchronous motor. The oscillation head is located in the upper part of the machine and generates the dynamic amplitude. The oscillation head is supported by preloaded compression springs on the upper crossbar and is guided centrally. The middle load drive is located in the lower part of the machine and applies the static preload via a geared motor and spindle drive. The specimen chamber is situated above the clamping table and is bounded at the top by the adjustable crosshead. Control of the test bench is handled by the EXCITING MOT control system. All control electronics for the system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and complies with protection class IP 50 according to EN 60529. Technical Data: General test bench data: Total height test bench: 1840 to 2240 mm Height of machine table: 1030 mm Width of test bench: 800 mm Depth of test bench: 1500 mm Specimen chamber height: max. 600 mm (without force transducer) Clear column passage: 550 mm Maximum force amplitude: 10,000 N Maximum total force: ±20,000 N Lsdpfjzii Awjx Abvsag Maximum oscillation amplitude: ±5 mm Test frequency: 30 to 110 Hz Transducer accuracy: at least Class 1 (according to DIN EN 10002-3) Test bench weight: approx. 1,880 kg Max. fixture weight: 150 kg General control cabinet data: Total height control cabinet: 1,900 mm Height of table top: 1,080 mm Control cabinet width: 650 mm Control cabinet depth: 700 mm Weight of control cabinet: 152 kg Color: RAL 9006 (White Aluminium), table top Midnight Site requirements: Space requirement: 2.5 x 2.5 m Required ceiling height: 2.8 m Floor load capacity: 170 N/cm² Power supply: 400 V / 50 Hz (clockwise rotation field) Connection plug: CEE connector, 5-pole, 16 A Fuse protection: 16 A Connection and environmental conditions Network conditions: Voltage: 400 V three-phase with neutral conductor and protective earth, clockwise rotation Voltage fluctuations: < ±10% Short-term voltage dips: < 20 ms Limits for continuous interference emission: Radio interference level A according to VDE0871 Frequency: 50 Hz ±1% Protective earth: earth resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data; details are subject to confirmation!) Further questions are welcome by phone.

Tahun pembuatan: 1979, Kondisi: siap digunakan (bekas), - BEKAS - MESIN BUBUT KONVENSIONAL TINGGI CENTRE: 200 mm JARAK ANTAR PUSAT: 1040 mm DIAMETER PEMBUBUTAN MAKS. DI ATAS TEMPAT TIDUR: 400 mm KAPASITAS BATANG: 54 mm SPINDEL: 53 - 2000 rpm; 220 mm KEPALA REVOLVER: 3 POSISI Ljdpfx Asy R E Ubjbvjag

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, ARI högkapacitetslinje för stora stockar Stockmagasin, 2 sektioner Stegmatning Stocktransportör Inmatning till avbarkare (Remill) Avbarkare Cambio 90-75/6 (eller Cambio 500) 2D-skanner för kassationslådor Stocktransportör med 2 kassationslådor Stocktransportör, utkastare till vänster Buffertmagasin och stegmatning Stocktransportör Rema 3D-skanner AriVislanda LT2 automatisk stockvändare 2006 AriVislanda LI-600 centrerande inmatning 2006 AriVislanda RL-600 reduktionsmaskin AriVislanda QSS-700 Såg 2011 AriVislanda VFW 600 L 2011 AriVislanda brädavskiljare 2006 Blockvändare AriVislanda blockinmatning typ Nils AriVislanda RC-600 reduktionsmaskin Ingvar Persson vridbord AriVislanda 500A inmatning AriVislanda 509-7F Multirip AriVislanda brädavskiljare Bandtransportör Dubbelkantlinjer Söderhamn (1 vänster, 1 höger) 2 x 300 m/min Tvärgående transportörer Söderhamn hiss Söderhamn 483 skanners Söderhamn 528 inmatning Söderhamn 5100 kantverk Söderhamn 5400 kantverksutmatning med kassationsutmatning Ljdpewp E Tnefx Abvsag EdgeIT-system

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Produktionsjahr: 2019 Spannung: 400 V / 50 Hz Motorleistung: 2 x 4 kW Luftvolumenstrom: 15.000 m³/h Filterfläche: 160 m²/4 Maximaler Druck: 2.800 Pa Lsdpfxovq Ncwe Abvoag Abmessungen (L x B x H): 2.060 x 1.515 x 3.310 mm Gewicht: 1.200 kg

Kondisi: bekas, Penawaran ini adalah untuk Lemari Pembeku Foster EcoPro EP700H G2 Pro. Lajdpfx Ajyrf Tlobvjg Unit ini dalam kondisi berfungsi penuh dan siap digunakan segera. Lemari Pembeku Foster EcoPro EP700H Pro adalah lemari pembeku kelas profesional yang dirancang untuk penyimpanan sampel jangka panjang yang aman dan efisien. Lemari ini memberikan kinerja suhu rendah yang stabil, efisiensi energi, dan ruang interior yang luas yang cocok untuk aplikasi ilmiah, medis, dan penelitian. Dibuat dengan material tahan lama dan teknologi pendinginan canggih, lemari ini memastikan integritas sampel sekaligus menjaga operasi yang tenang dan andal. Ideal untuk laboratorium, rumah sakit, dan fasilitas penelitian.

Kondisi: hampir baru (bekas), Mesin demonstrasi HBB 550 dari Hauslhof Ljdpfx Abozqq Nneveag G-VHBB550R1 Mesin gergaji pita blok yang kokoh untuk diameter batang hingga 55 cm, presisi pemotongan yang baik, penyesuaian ketinggian yang tepat dan mudah digunakan. Bagian atas dilapisi dengan cat bubuk, rangka bawah sebagian dilapisi dengan lapisan pelindung galvanis. Dapat diperluas tanpa batas dengan bagian ekstensi. Telah diuji CE. Produk asli!, bukan tiruan! Data teknis: diameter batang maksimum 550 mm lebar papan maksimum 460 mm daya keluaran motor S6 3,7 kW (3 kW S1) panjang pemotongan, versi dasar 3,7 m panjang pita gergaji 3200 mm lebar pita gergaji hingga 35 mm panjang pemotongan, bagian ekstensi (opsional) 2,3 m berat 355 kg

Kondisi: sangat baik (bekas), Motor kipas angin 15 kW Inlet 35 cm, outlet 35 cm Motor kipas angin 3 kW, inlet 20 cm, outlet 20 cm Tinggi 520 cm Lebar 200 cm Panjang 240 cm Pipa pengembalian udara panas Panjang 570 cm, lebar 55 cm, outlet 80 cm 3 pipa dengan magnet Lsdpfxsx N Scvo Abvjag

Kondisi: bekas, Tahun pembuatan: 2003, Ringkasan Lini pengisian lengkap untuk botol kaca sekali pakai ini diproduksi pada tahun 2003 oleh beberapa produsen ternama Eropa, terutama oleh Sidel. Lini ini dirancang untuk produksi minuman berkapasitas tinggi dengan output hingga 40.000 botol/jam. Mesin berada dalam kondisi baik dan didesain untuk operasi 3-shift non-stop. Data Teknis - Kapasitas: 40.000 botol/jam (untuk 0,25L) - Format botol: 0,25L, 0,33L, 0,5L - Format kemasan: - 4x6 x 25cl - 1x12 x 25cl - 24x25cl - 24x30cl - 4x6 x 33cl - 6x4 x 33cl - 1x12 x 33cl - 24x33cl - 20x50cl - Aplikasi: Bir, CSD, atau minuman lain dalam botol kaca sekali pakai - Desain higienis - Perubahan format otomatis Ruang lingkup Pengiriman Transportasi palet (Depalletizer) | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B Depalletizer barang curah | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B Transportasi palet (Palletizer) | Sidel / SIG Simonazzi | 2003 | LINEAR Lsdoyb Tucspfx Abvsag Palletizer untuk tray dan/atau karton | Sidel / SIG Simonazzi | 2003 | LINEAR Mesin pengemas shrink palet | Sidel / SIG Simonazzi / MSK | 2003 | ECONOTECH/TOWERTECH Labeler palet | Sidel / SIG Simonazzi / Logopak | 2003 | LOGOMATIC 920 II PF Pembentuk keranjang | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLA Transporter four-pack & pembagi | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLW Pemasang keranjang | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLE Case packer karton | Sidel / SIG Simonazzi / FANUC | 2003 | ROBOKOMBI Case sealer karton | Sidel / SIG Simonazzi / Bortolin | 2003 | MARA H.M Penanda karton 1 | Sidel / SIG Simonazzi / Domino | 2003 | A-Series Inkjet Printer Penanda karton 2 | Sidel / SIG Simonazzi / Domino | 2003 | A-Series Inkjet Printer Checkweigher | Prisma | 2003 | 10D3 Inspeksi karton penuh | BBull / Centro Kontrollsysteme | 2015 | Image VKK 500 Konveyor botol | Sidel / SIG Simonazzi | 2003 | TRANSPORT Konveyor karton | Sidel / SIG Simonazzi | 2003 | TRANSPORT Feeder tutup crown | Sidel / SIG Simonazzi | 2003 | SM80 Rinser | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Mesin pengisi | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Capping | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP C.I.P. | Sidel / SIG Simonazzi | 2003 | AUTOSAN Kontrol level pengisian | Sidel / SIG Simonazzi / Heuft | 2003 | SPECTRUM TX Pasteur tunnel/botol | Sidel / SIG Simonazzi | 2003 | PAMA CLD 50/144 Coding botol pada label leher | Mundi-Technology | 2015 | Mundiscan UP2000 HE Mesin label | Sidel / SIG Simonazzi / Krones | 2003 | Topmodule Tipe 407 Inspeksi & sortasi botol | Sidel / SIG Simonazzi / Krones | 2003 | Checkmat Tipe 707 TapTone | Sidel / SIG Simonazzi / Krones | 2003 | TapTone Seri 500

Kondisi: bekas, Dimensions (LxWxH): 1785 x 600 x 1200 mm Swing Diameter: approx. 260 mm Centre Height: 130 mm Weight approx.: 770 kg Turning Length: 600 mm Technical Data: Distance between centres: 600 mm Centre height: 130 mm Swing diameter over bed: 260 mm Spindle bore: 28 mm Variable spindle speeds: 52 – 2,250 rpm Drive power: 1.62 kW External dimensions: 1,785 mm (length) x 600 mm (width) x 1,200 mm (height) Weight: approx. 770 kg Equipment: Lodjv Ncn Depfx Abvjag Three-jaw chuck, 140 mm diameter Four-way tool post Tailstock Drill chuck

Kondisi: bekas, Type: POWER SWING 20 kN Lodjzii A Dspfx Abvjag Sincotec Resonance Testing System Power Swing 20 kN Manufacturer maintenance performed General Information For sale is a used Power Swing 20 kN resonance testing system from Sincotec Test Systems GmbH. The test bench was operated in single-shift use, with all maintenance regularly performed by the manufacturer. Key Features: - Robust design for continuous operation - Precise resonance testing up to 20 kN - Manufacturer maintenance documentation available - Ideal for research, testing, and development applications Technical Specifications – Test Bench Feature / Value Total height (test bench): 1215 mm (without clamping device) Width (test bench): 2005 mm Depth (test bench): 1205 mm Maximum force amplitude: 10 kN Maximum total force: ±20 kN Transducer accuracy: min. Class 1 (DIN EN 10002-3) Technical Specifications – Control Cabinet Feature / Value Total height (control cabinet): approx. 1800 mm Height of worktop: 1080 mm Width (control cabinet): 650 mm (narrow worktop) / 1450 mm (wide worktop) Depth (control cabinet): 700 mm (narrow worktop) / 800 mm (wide worktop) Weight: 152 kg (small worktop), 187 kg (large worktop), with (granite plate) 247 kg Site Requirements Feature / Value Required footprint: 4.3 × 3.0 m Required ceiling height: 2.5 m Floor load capacity: 234 N/cm² Electrical Requirements Feature / Value Voltage: 400 V three-phase with neutral conductor and protective earth Phase sequence: clockwise Voltage fluctuation: ≤ ±10 % Short term interruptions: < 20 ms EMC limit: Interference level A according to VDE 0871 Frequency: 50 Hz ± 1 % Protective earth / grounding resistance: < 0.3 Ω Connection and Protection Feature / Value Power supply: 400 V / 50 Hz (clockwise phase sequence) Connection plug: CEE socket, 5-pin, 16 A Protection: 16 A Test bench weight: approx. 3.6 t Max. weight of clamping device: 250 kg Condition: used Scope of delivery: (see image) (Subject to change and errors in technical data. All information is subject to confirmation!) If you have any further questions, please feel free to contact us by phone.

Tahun pembuatan: 2006, jam operasional: 7.913 h, Kondisi: bekas,

Kondisi: baik (bekas), Die Maschine befindet sich in einem guten Zustand. Lodpfezb Nfqox Abveag

Kondisi: bekas, SZIM MSN-500 Traditionelle Universal-Fräsmaschine. Verfahrweg X: 700 mm Verfahrweg Y: 450 mm Verfahrweg Z: 500 mm Drehzahl: 25 – 3150 U/min Leistungsbedarf: 15 kVA Maschinenabmessungen: 3100 x 2900 x 2100 mm Maschinengewicht: ca. 3000 kg Lajdpfev Sk Iqox Abvjg Guter betriebsbereiter Zustand. Bitte sehen Sie sich auch unsere weiteren Angebote an.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Instalasi ekstraksi GHEBAL Jumlah kantong filter: 180 buah Katup sel built-in Kipas di belakang katup sel Daya motor utama: 30 kW (bisa diubah menjadi 22 kW) Sistem pembersihan kantong secara pneumatik Dimensi: 3550 x 200 x 7850 mm Lsdpfx Asx H Ndfsbvsag Berat: sekitar 2000 kg

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, tahun perombakan terakhir: 2025, 1) Log yard with 10 boxes (ejection boxes) – New and used Log infeed and sorting line new Feed speed 50 m/min plus the following used components: Comprising: New infeed transverse conveyor with step feeder, Used log conveyor, Used log conveyor with ejector, Used Cambio 50 debarking machine, Used split detection device with belt, Measuring section-log sorting conveyor. Including debarking; Inspection and Painting; Including log infeed. Without boxes, without sheet metal cladding, without measurement system, without outfeed control and switch cabinet. Root butt reducer 2) Log Infeed for Chipper Line Heavy-duty log transverse conveyor NEW Log transverse conveyor, 4-chain version Axle spacing: 7.5 m Total length: 8.0 m Drive shaft: 100 mm diameter Chain: bushed conveyor chain, 100 mm pitch – heaviest version Fixed end stops in rear, without sheet metal cladding Steel subframe: HEB 200 Construction height: 1000 mm Drive: geared motor 7.5 kW 3) Log Alignment Conveyor NEW Number of chains [pcs] 4 Axle spacing [mm] 3,500 Overall width [mm] 5,730 Pusher spacing [mm] 1,000 Drive shaft Ø [mm] 100 Drive SEW [kW] 7.5 Speed [m/min] 10 Design: fully covered between chain ways Lodpfx Abeykr Aqovoag 4) Step Feeder NEW Feed steps [pcs.] 4 Overall width [mm] 4,200 Sheet thicknesses [mm] Moving steps 12 mm, fixed steps 20 mm Drive SEW [kW] 18.5 Drive via crank unit and geared motor 5) Chipper Line (make WD) Log conveyor before RB 2 infeed Extend length to 18.5 m – including drive and return RB 2 infeed With driven chain bed steel enclosure, designed for the side loading of logs. Conveyor chain with pushers, welded frame construction. Feeding and centering device ZE with log turning device TDV and centering unit. Feeding unit ZE Log length: 2.5 - 5 m Minimum passage width: 80 mm Maximum passage width: 780 mm Construction height: 1,000 mm Weight: 5,400 kg Profiling chipper FZ 3 Machine frame with base frame 2 knife head housings with main shaft bearings, 2 knife heads with planing segments, Drive power 90 kW Log diameter: min. 100 mm, max. 400 mm Chipping height above chain: max. 515 mm Distance between discs: max. 570 mm, min. 60 mm Disc diameter: 1,260 mm Positioning by electric motors 2 hydraulic units, 35 kW for pre- and post-cutting Pre-cutting cant log turning device Electrically driven roller conveyor TR 800 Centering and infeed unit ZE with FZ 3 chipper

Kondisi: sangat baik (bekas), Height 360 cm Length 240 cm Laodpfx Aert Tt Dobveg Width 220 cm 2.5 kW motor 4,800 m³/h

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, Gerbong dengan pita untuk gergaji 1500cm, ramp pemuatan gelondongan, dan konveyor pelat 8m dengan penahan. Motor gergaji 37Kw. Lodpfx Aboxvpd Ievsag

Kondisi: siap digunakan (bekas), Turn length 450 mm Swing diameter over bed 245 mm Swing diameter over cross slide 135 mm Spindle bore 23.0 mm Mount DIN 55021-4 Tailstock quill: 2 MT Quill travel 80.0 mm Spindle speed 60 - 3000 rpm Bed width 155 mm Total power requirement 1.2 / 1.5 kW Voltage 380 V Machine weight approx. 340 kg Dimensions L x W x H 1200 x 650 x 1330 mm From a vocational school (!) Especially suitable for precision turned parts The Primus series is the most compact precision centre lathe (engine lathe) from WEILER. It is considered a suitable machine for precise work in confined spaces in toolmaking, laboratories, and training workshops. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum vibration damping and durability. Equipment: - Robust centre lathe with leadscrew and feedshaft - 2-axis digital readout "D60-2V" - 3-jaw chuck - Swiveling chuck guard - Chuck key Lsdpfx Aezbc Daebvsag - MULTIFIX toolpost with 3 holders - Sliding tailstock - Control panel, front left - Infinitely variable feeds for longitudinal and cross slide - Pole-changing drive motor - Machine base - Rear chip and splash guard - Additional accessories such as collet chuck + collets, etc. - Emergency stop button on the front

Kondisi: baik (bekas), WSM stationary screwdriving unit, screwdriving station Assembly of components for car radios and navigation systems, as well as testing of the same. The assembly station is surrounded by a safety enclosure. The service doors are equipped with safety interlock switches. In automatic mode, the doors are locked and can only be opened after an automatic stop or in manual mode by pressing the 'Doors' button on the control panel. When a door is open, automatic operation cannot be started. Process sequence: The station is loaded with the pre-assembled module via the transfer belt. The following are the work steps of the automatic station during one WT cycle. Under normal operation, all three stations work in parallel. - Positioning of the WT with the pre-assembled module in station 2.1 - Lowering the carrier with scanner and vision sensor - Scanning of the three codes (front panel, front PCB, SD PCB), comparison with database Ljdpfoibichox Abveag - Checking the correct engagement of the FFC in the connector - Raising the carrier and lowering the WT onto the belt - Positioning the WT with the pre-assembled module in station 2.2 - Positioning the screwdriver and fastening the front PCB - Lowering the WT onto the belt - Positioning the WT with the pre-assembled module in station 2.3 - Lowering the light protection cover and contacting, moving in the carrier with the test sensors from below - Type-specific testing of the illumination of SD + CD slots and push buttons - Functional test of CD eject button - Lowering the WT onto the belt > process continues If errors occur during testing, these are displayed and can be corrected if possible. For this, switch to manual mode and open the doors. After the repair, restart the automatic mode; the WT will be retested in the station. If repair is not possible (e.g., screwdriving error), the WT will be marked as NIO (not OK) in the control system and will not be further processed. Manual NIO marking and removal are also possible. Financing through our partner bank is also possible. komplett-konzept.leasingo.de More assembly stations, both new and used, can be found in our shop! International shipping costs available upon request!

Kondisi: bekas, meja perata dengan rol diagonal Ljdpfeztmt Iox Abvsag

Kondisi: bekas, nomor mesin/kendaraan: LC521, Used PROCOMAC bottling line for still and sparkling water up to 12,000 bottles per hour We are offering a complete bottling line for natural and carbonated mineral water, specifically designed to meet the complex requirements of technicians and industry experts. This solution handles bottle formats from 0.5 to 2 liters and produces up to 12,000 bottles per hour, ensuring high reliability and excellent performance. SIPA Blow Molding Machine and Preform Handling The SIPA SFR 12 blow molding machine, built in 2000, initiates the production process. It manages preforms efficiently with a tipper and an elevator-orienter. Furthermore, the integrated chiller and four mold sets enable precise and flexible production of bottles in different sizes, ensuring smooth operations at the initial production stage. Lajdpfx Abjvgu Tyjvsg PROCOMAC Monobloc: The core of the system The PROCOMAC monobloc unites three key bottling functions in a single system. First, the PROCOMAC GRIPSTAR 2R rinser thoroughly cleans the bottles and prepares them for filling. Afterwards, the PROCOMAC FILLSTAR PET filler rapidly and accurately fills the bottles with natural or carbonated mineral water. Finally, the PROCOMAC 10-head PICK & PLACE capper seals the bottles safely and efficiently. Additionally, the saturator and the CIP system (Clean-In-Place) guarantee adherence to hygiene standards and make maintenance easier. These additional components not only increase the efficiency of the monobloc, but also ensure dependable performance throughout production. Conveying and Packaging Systems The PELACCI P.13.8.5 cap elevator provides the system with a continuous supply of caps without interruptions. Furthermore, the PE ROLLMATIC CI 540 12T labeller precisely applies labels to bottles of various formats. After labelling, the ZAMBELLI LFT 50 shrink wrapper quickly packs the bottles in bundles, while the COMAG H 55/1 handle applicator applies handles to bundles for easier transport. The LEVATI ARTIS palletizer accurately organizes the bundles onto pallets. The ROBOPAC HELIX HS 30 stretch wrapper securely wraps the load for transport protection. Finally, the EIDOS labelling system prints and applies labels directly in the production line, allowing full customization to meet various production requirements. Conveyor Belts for Optimal Product Flow The conveyor belt system ensures efficient material flow throughout all stages of production. Specifically designed air conveyors transport bottles rapidly, while specialized belts transfer bundles and pallets seamlessly between the line’s sections. This ensures a continuous and smooth workflow, significantly reducing production downtime. Current Condition and Availability This used PROCOMAC bottling line for still and sparkling water up to 12,000 bottles per hour is operating efficiently and will remain in service until April 2025, when it will be dismantled and replaced. We recommend ...

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2024, Unit yang Dikembalikan dari Leasing Mahr MarSurf XP 20 Professional, Sistem Pengukuran Permukaan dan Kontur CNC – Tahun Pembuatan 2024 Data Teknis Produsen: Mahr Model: MarSurf XP 20 Professional – Seri 1000 Tahun Pembuatan: 2024 Kondisi: Bekas Perlengkapan MarSurf XP 20 Professional dengan Kontrol LD MarWin Professional Contour & Roughness Plus Perangkat Lunak CNC-Plus QS-STAT Plus (Antarmuka Q-DAS) PC Industri (Dell) dengan Windows 10 IoT Enterprise Unit Pemberi Makan MarSurf LD 130 Panjang Pemberi Makan: 130 mm Langkah Pengukuran Standar Z: 13 mm Unit Pengganti Lengan Pengukur untuk hingga 10 Lengan Pengukur Sistem Pemosisian 4 Sumbu CNC Sumbu Putar ±135° Sumbu Putar ±170° Sumbu Linear X: 400 mm Sumbu Linear Y: 400 mm Akurasi Pemosisian: sekitar ±250 µm (X/Y/Z) Pelat Pengukuran Batu Keras dengan Isolasi Getaran Mekanis-Pneumatik Tiang Pengukuran CNC Layar Sentuh 17" Lemari Kontrol Penutup Pelindung Terisolasi Suara Dimensi Mesin Penutup (L × P × T): 1450 × 1300 × 2270 mm Aksesori Pelat Adaptor Offset X/Y/Z Cekam Manual DM28 Tiang Sinyal Set Lengan Pengukur Lengan Pengukur Tambahan Memori Kerja 32 GB Dokumentasi Teknis Lengkap (digital dan dalam bentuk cetak) Deskripsi Yang dijual adalah sistem pengukuran permukaan dan kontur CNC berkualitas tinggi dari Mahr. Sistem ini cocok untuk tugas-tugas pengukuran presisi tinggi dalam pengujian kualitas industri dan dilengkapi dengan perlengkapan lengkap dengan perangkat lunak pengukuran dan evaluasi profesional, serta sistem pemosisian 4 sumbu otomatis. Sistem ini dikirimkan pada tahun 2024 dan dalam kondisi bekas. Ledpfezqzn Uex Abvjag Harap perhatikan catatan berikut: Tinggi dan berat aset harus dipertimbangkan secara cermat saat memilih kendaraan pengangkut. Forklift tersedia untuk pemuatan. Jika pengambilan tidak dilakukan tepat waktu, biaya penyimpanan sebesar 20,00 € per lot dan per hari yang telah dimulai akan dikenakan. Biaya tersebut harus dibayar sebelum pengambilan. Penjualan dilakukan tanpa jaminan atau garansi apa pun. Informasi tentang data teknis berasal dari penawaran saat itu. Tidak ada jaminan untuk kesalahan pengetikan dan pengukuran. Jika ragu, bandingkan informasi dengan foto yang disediakan atau periksa barang di lokasi sebelum akhir lelang.

Tahun pembuatan: 2013, Kondisi: baik (bekas), BHT INNOVA E3 Professional Bronchoscope Washer-Disinfector Laedpfx Abein Edwovog INNOVA – Professional Endoscope Washer-Disinfector for Medical Practices and Small Clinics The INNOVA™ E3s is the world’s best-selling BHT endoscope washer-disinfector. This model is compact yet offers high capacity for endoscopes or bronchoscopes. Depending on the type of reprocessing, a total of 10 to 20 endoscope reprocessing cycles can be achieved daily. This makes it the ideal solution for private medical offices and small clinics that prioritize reliable hygiene, efficiency, and dependability. Reliability and Maximum Hygiene Every Cycle: - Full compliance with DIN EN ISO 15883-1/-4 and RKI guidelines - Numerous additional features, e.g. thermal self-disinfection at 90°C in accordance with DIN EN ISO 15883-4, 4.8.1. Highlights: - Flexible operation in combination with an additional INNOVA® E2 or E3 for 30 to 40 cycles per day - Suitable for glutaraldehyde as well as peracetic acid from a wide range of suppliers - Compatible with standard endoscopes from Fuji, Olympus, Pentax, Storz, Wolf - Single-channel connection or patented pressure chamber system possible - Optionally available for thermal reprocessing of reusable biopsy forceps, polypectomy snares, etc. - Thermal disinfection of final rinse water (DH version) as recommended by RKI - Secure documentation and traceability via batch control; operator and endoscope identification via barcode scanner - Data output via printer, data logger, or IT interface; easy integration into existing IT environments Technical Data: - Capacity: for 2 endoscopes or 4 ENT scopes - Hygiene design: Hygienic workflow, single-door system - Channel connection system: Single-channel connection or patented pressure chamber system available - Individual channel monitoring (CMS): No - Chemistry: Suitable for both glutaraldehyde and peracetic acid; DH version (with boiler for glutaraldehyde) or DC version (filtered solution, for glutaraldehyde or peracetic acid) - Documentation and integration: Yes, interface for printer/data logger standard; printer included; optional scanner/IT interface - Thermal instrument reprocessing at 90°C: Available with additional equipment - Electrical installation: 3-phase 400V / 50 Hz AC+N+PE. Connection load: 11 kW. Fuse protection: 3 x 20 A Year of manufacture: 19.01.2013 Condition: used Financing through our partner bank is available. komplett-konzept.leasingo.de More items – new and used – can be found in our shop! International shipping costs on request!

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Distance between centers: 1000 mm Lsdperi Rnbefx Abveag Height of spikes: 215 mm Swing over bed: 430 mm Spindle bore: 52 mm Spindle speeds: 32-1800 RPM

Kondisi: siap digunakan (bekas), en001 Lsdpfx Ajzbc Dtebvjag