Beli Wiemers R1950 bekas (212)

Kondisi: belum diuji (bekas), Kenward surface grinding machine Lrsdpehg Nh Eefx Aa Usl Offered here is a surface grinding machine from Kenward. Technical specifications: - Grinding type: horizontal peripheral grinding - Maximum grinding length: 300 mm - Maximum grinding width: 100 mm - Grinding wheel diameter: Ø 120 mm - Z-axis travel: 100 mm - Voltage: 380 / 440 V - Frequency: 50 Hz - Speed: 2850 rpm

Tahun pembuatan: 1967, Kondisi: baik (bekas), WKG 234 Ditawarkan sebuah mesin frais meja bundar merek Müller tipe Duo Främatic. Data teknis: Pabrikan: Müller Tipe: Duo Främatic Tahun pembuatan: 1966 Holder alat: ISO 50 Area penjepitan meja bundar (dalam): 650x1490 mm Pergerakan meja: rotasi tak terbatas Feed kecil: 100 mm/menit Feed besar: 2000 mm/menit Putaran maksimum: 650 rpm Putaran minimum: 88 rpm Jumlah kecepatan: 8 tingkat Berat: 5 ton Lsdpsg Ummajfx Aa Ujrl Spindel frais: 2 unit Jarak meja ke spindel: 350 mm Daya listrik: 27 kW Catatan: Cocok untuk kepala pisau carbide (ø315 mm) untuk aluminium ringan hingga ø400 mm Pengangkatan pisau frais otomatis 1 mm tersedia Penyetelan pinol per 100 mm Penggerak spindel frais dapat dioperasikan terpisah Tersedia beberapa unit mesin!

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 135 kg, tinggi total: 250 mm, panjang total: 900 mm, lebar total: 400 mm, -KOM 694- Offered here is a hydraulic power clamping vice. It features a 360-degree swivel base and a vertical crank handle. Technical Data: Jaw width: approx. 200 mm Jaw height: approx. 65 mm Opening travel: approx. 355 mm Lsdpjwf Nc Sefx Aa Ujrl Dimensions: approx. (900 mm x 400 mm x 250 mm) Weight: approx. 135 kg

Kondisi: baik (bekas), Tahun pembuatan: 1988, nomor mesin/kendaraan: 40 / 670, Fungsionalitas: belum diuji, -KOM 853- Offered here is a Unifil air purifier from ILT Industrie-Luftfiltertechnik GmbH. The unit is in used condition and has not been tested for functionality. Manufacturer: ILT Industrie-Luftfiltertechnik GmbH Model: U40 Serial No.: 40 / 670 Year of manufacture: 1988 Lodpfxsw Ehzyj Aa Uerl Voltage: 80 V Current: 3.3 A Frequency: 50 Hz

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2023, tegangan masuk: 400 V, panjang broaching: 1.000 mm, jumlah posisi broaching: 1, kecepatan broaching: 3 m/menit, Manufacturer: Rausch (Haan/Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580kg Overhauled: 3/2023 by Wiemers AG General / technical data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4 with current "CE" marking Pulling force: 40 kN (4,000kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / working area: 540 x 340mm / 450 x 250mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (h x w x d): 2,350mm x 900mm x 1,000mm (with splash-guard enclosure) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / special equipment: - Dual-speed drive - Safety door with interlock and chip chute - Chip chute with integrated tool tray - Electric clamping jaw sensing (tool removal control to prevent unintentional return of the carriage) - Integrated coolant system with solenoid valve (operated via pivot system) - Patented coolant/lubricant pivot system - Externally adjustable tool length setting system (reproducible across machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broach tools (keyway tools) - Three-sided closed splash guard enclosure with tool tray (ideal for profile broaching) - External control panel (connected via Harting connector) Note: The machine has been completely overhauled, and the machine body fully refurbished. The following wear parts have been replaced: Ledpfsw H Dgnsx Aa Uerl - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, check valve, and drain cock) including the coolant/lubricant pivot system is new - Coolant supply is controlled by a solenoid valve, which can be operated via the pivot system - The carriage as well as clamping jaws and gear segments are new - A switchable clamping jaw monitoring system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal indicator, and door locking mechanism - The tool length setting system has been relocated outside the machine enclosure - Additional limit switches have been installed - The complete electrical system (control cabinet) is new - No PLC is installed; the machine is electrically maintenance-friendly - New drive motor (by SEW Germany) with brake - The machine has been newly painted with 2-component structural paint General: The double spindle drive ensures smooth and central pulling as well as a constant broaching speed (broaching speed selectable at 3 m/min or 6 m/min). Due to its design, the machine is quick and easy to set up for broaching with flat broach tools for keyway machining. Thanks to the universally designed carriage and machine table, both profile and flat broaching can be performed without the need for additional pull heads.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, -KOM 3134- Mennekes Wall Socket Duo 5103A Offered here is a used Mennekes wall socket. We have additional identical wall sockets in stock. Manufacturer: Mennekes Part No.: 25.5103A Model: 5103A Protection rating: IP 44 Lrsdswupyijpfx Aa Uel Voltage: 400 V Number of poles: 5 Switch: mechanical interlock

Tahun pembuatan: 1960, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: 1732, Vertical internal broaching machine with indexing table from Karl Klink Type: RSI6DT Machine No.: 1732 Year of manufacture: 1960 Ledpfsgyd Svex Aa Uerl Weight: 3.2 tons Broaching force: 6,000 kg With indexing table (2 stations) Power supply: 380V / 50Hz Rated current: 15 A Connected load: 4 kW The machine has been fully overhauled and is therefore in very good condition.

Tahun pembuatan: 1964, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: 2041, Vertical internal broaching machine with index plate by Karl Klink Model: RSI8DT1 Machine no.: 2041 Year of manufacture: 1964 Weight: 3.2 t Broaching force: 8,000 kg With index plate (2 stations) Power supply: 380V / 50Hz Rated current: 25 A Connected load: 5.5 kW Lredpfogyd S Djx Aa Uol The machine has been completely overhauled and is thus in very good condition.

Tahun pembuatan: 1962, Kondisi: baik (bekas), nomor mesin/kendaraan: 1886, used vertical hydraulic internal broaching machine with 3 broaching stations Ledpet Dwb Dsfx Aa Usrl Pulling force: 10,000 kg Broaching length: 1,200 mm Number of broaching stations: 3 Distance between broaching stations: 380 mm Clamping diameter for broaching heads: 3 x Ø ___ mm Passage width between the cylinders: max. XXX mm Cutting speed: hydraulically steplessly adjustable from 1 m/min to max. 7 m/min Return speed: hydraulically steplessly adjustable from 7 to max. 25 m/min Machine footprint (W x D x H): approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380 Volt 50 Hz / 8.0 kW Accessories / Special equipment: The machine is equipped with a work table featuring 3 bores for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in the pull bridge as well as the feeder. The machine has an integrated coolant system. Comments: The machine is designed for use in series production; for optimal use, a foundation (pit) or optionally a platform is recommended. Broaching heads and push-out devices are available on request. The machine can be inspected at our warehouse.

Kondisi: baik (bekas), This listing offers a row drilling machine (Lochreihenbohrmaschine) by Knoevenagel. Specifications: - Table dimensions: 58 x 43 cm (with 0-50 cm scale) - Height-adjustable and tiltable table - Model: VGC 18809 - Voltage: 420 V, 4.0 A - 15 spindles Ledpfxjd Sdurs Aa Ujrl For further details and to assess the machine’s condition, please refer to the photos.

Kondisi: bekas, Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 17065, manufacturer: Henning model: U6/1000 machine no.: 17065 year of manufacture: 1979 gross weight: 1,100 kg general / technical data: used mechanical vertical broaching machine Henning, in operational condition drawing force: 6,000 kg (60 kN) broaching speeds: 3 m/min and 6 m/min return speed: 6 m/min maximum stroke: 1,000 mm maximum tool length: 1,200 mm table size / working area: 600 x 460 mm / 480 x 340 mm table opening: Ø 170 mm with eccentric table insert featuring Ø 90 mm borehole for standard broaching mandrels (Rausch system) workpiece diameter: unlimited dimensions (h x w x d): 1,650 mm x 1,200 mm x 700 mm (height = table height to floor, excluding superstructures) motor: 7.4 / 10 kW power supply: 380 Volt / 50 Hz accessories / special equipment: - integrated coolant system - return stroke control with dual activation mode - machine documentation - automatic jaw opener at lower pull bridge position (for tool removal) - tool clamping with universal jaws for flat shanks DIN 1416 BL 6 remarks: The machine is in its original condition and functionality has been tested. The machine is mechanically driven via trapezoidal thread spindle and geared motor. Unlike most mechanically driven broaching machines, in which the trapezoidal spindle forms both the drive and guide element, this machine features additional guide columns. As a result, the machine is additionally column-guided and very robustly constructed. The double spindle drive is ideal for maintaining a constant cutting speed even at higher drawing forces. The machine is in stock at our warehouse and can be inspected under power. Ljdpfsup Uzfox Aa Ujrl

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, -KOM 3081- Lodpfxowxup Rs Aa Ujrl Offered here is a fixed (non-rotating) live center. Please note that this is not a typical Morse taper (MK) or steep taper (SK) mounting. Technical Data: Weight: 25 kg Smallest diameter: approx. 88.5 mm Largest diameter: approx. 100 mm Shank length: approx. 234 mm Weight: approx. 25 kg

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, panjang broaching: 1.000 mm, jumlah posisi broaching: 1, kecepatan broaching: 3 m/menit, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680kg Lredsw Ighijpfx Aa Ujl Overhaul: 11/2024 by Wiemers AG General / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Tensile force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / working surface: 610 x 470 mm / 520 x 320 mm Table bore: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (h x w x d): 2,250 mm x 850 mm x 1,200 mm (h = table height to floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional changes/optimisations made to the original machine: - External stroke adjustment - New cross-machine, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety guard door with monitoring (integrated in the emergency stop circuit) - Machine enclosure below the guard door, with chip guard and tool storage area - Electrical probe for clamping jaws (tool removal check to prevent unintentional retraction of the pull bridge) - Coolant swivel system with switching solenoid valve during the swivel process (enables coolant to be switched on before broaching stroke is initiated » visual check of lubricant flow—no dry cut!) - Routing of electrical cables in steel protective conduits - Heavy-duty control cabinet bracket for machine components - Additional oil-tight tray mounted on the control cabinet - Three-sided splash guard cabin (w = 960 x d = 450 x h = 590 mm) - Reinforced chip screen with magnetic separator - Operating panel made of stainless steel sheet with durable labeling - Four central lubrication points for the trapezoidal spindle drive Remarks: The machine has been completely overhauled; the machine body is fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made of cast wear-resistant bronze - All bearings and seals replaced - The coolant system (pump, solenoid valve, drain valve), including the coolant/lubricant swivel system, is new - The clamping jaws are new - The complete electrical system (control cabinet) is new - All covers and enclosures are new - The following components have been overhauled and reused: -- Machine base -- Machine stand -- Machine table with table insert -- Pull bridge (clamping jaws are new) -- Gear wheels -- Electric motor (new brake, new bearings) The machine is in stock at our warehouse and can be inspected under power. The images attached are original photos of the machine. The machine is CE certified. The CE certificate corresponds to the 1998 standard (first overhaul).

Kondisi: baik (bekas), berat keseluruhan: 560 kg, Pelat penanda / meja penanda / pelat ukur / 1195x1000x160(35) mm -KOM 493- Ditawarkan di sini adalah pelat penanda atau pelat ukur yang sangat kokoh lengkap dengan kaki-kakinya. Ledpfx Aajxrb N Ue Ujrl Dimensi: 1195 x 1000 x 160 (35) mm Total berat: kira-kira 580 kg (termasuk palet) Berat per kaki mesin: kira-kira 42 kg Berat pelat ukur: kira-kira 392 kg Pelat penanda memiliki tinggi kerja 791 mm. Namun, tinggi kaki dapat diatur.

Kondisi: baik (bekas), -KOM 3030- Offered here is a heavy-duty shelving system. The condition of the shelving system is good. Dimensions: Upright: approx. 4500 mm x approx. 1250 mm Shelf: approx. 2700 mm x approx. 1250 mm Crossbeam: approx. 2750 mm long Lsdpfsu Unqcsx Aa Usrl For all further details, please refer to the pictures! Collection is free of charge. You will receive a proper invoice with VAT shown separately upon purchase. We have more various interesting items for sale. Feel free to check out all our listings. If you are interested or have any questions, please feel free to contact us via the messaging function!

Kondisi: bekas, Tahun pembuatan: 1963, Fungsionalitas: belum diuji, Manufacturer: Steinel Model: 6 Stations Year of Manufacture: 1963 Weight: approx. 2,500 kg General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling operations in small workpieces Number of drilling units: 7 Station 1 – Loading and unloading Station 2 – Vertical drilling unit Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit Station 5 – Horizontal spindle unit Station 6 – Horizontal drilling unit and vertical thread cutting unit Feed of drilling units: Mechanical feed via quill Drill heads: single-spindle Tool diameter: approx. Ø3 mm to Ø8 mm Workpiece clamping: Hand-operated collet chuck Machine dimensions (W x D x H): approx. Ø 2,000 mm x H = 2,200 mm Power supply / Connected load: 380 Volts, 50 Hz Accessories / Special features: • Designed for mass production applications • Equipped with a sturdy machine table, swarf removal system to the underside of the table center, with a separate large coolant tank • Comprehensive range of clamping devices and auxiliary equipment Ljdpfx Aaswyn S Uo Uerl • Fitted with a 6-station rotary indexing table

Tahun pembuatan: 1983, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg Lrsdpfx Aasd Nb A Nj Uol General Information / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition - Pulling force: 16,000 kg - Broaching length: 1,250 mm - Broaching stations: 3 units - Distance between broaching stations: 125 mm - Clamping diameter for draw heads: 3 x Ø 80 mm - Pass-through width between cylinders: max. 435 mm - Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min - Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min - Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit base) - Power supply / rated connected load: 380 Volt, 50 Hz / 22 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-operated draw heads according to DIN 1417/18 for locking broaching tools in the draw bridge. The needle extractor heads in the tool feeder are hydraulically locked. The machine includes a coolant system with integrated magnetic band chip conveyor for installation in a pit. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in serial production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle extractors are available upon request. The machine can be inspected at our warehouse.

Kondisi: bekas, Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, -KOM 3091- Leuze photoelectric sensors are being offered here. The sensors are in good condition and were previously used as a safety sensor pair in a set of two. A total of six Leuze photoelectric sensors of this type are available. Lsdpjwl U Sxjfx Aa Usrl

Kondisi: bekas, Tahun pembuatan: 1988, Manufacturer: Haacke Model: UW II A-CNC Year of manufacture: 1988 Suitable only for step drills up to max. Ø 30mm Lredpfsg Tvmbjx Aa Uel Cross adjustment: 250mm Vertical adjustment: 250mm Grinding length: 400mm Weight: 1.4 t Footprint: 2.5 x 1.2 x 1.9 m Application: For grinding steps on step drills Scope of delivery/accessories: Paper band filter, make: LKK Front lamella collet chuck Forkardt Overz /BR 50/ LH-Z 24394

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 2.200 kg, tinggi angkat: 122 mm, tinggi konstruksi: 1.234 mm, -KOM 3154- Ditawarkan di sini adalah hand pallet baru dari produsen Jungheinrich. Hand pallet ini dijual dalam kondisi baru, terkemas asli (lihat gambar terakhir). Material roller garpu: poliuretan Tipe roller garpu: tunggal Material roda kemudi: karet padat Angkat: 122 mm Tinggi posisi rendah: 83 mm Tinggi pegangan kemudi: 1234 mm Hand pallet ini mampu mengangkat hingga 2200 kg. Anda akan menerima manual operasi serta deklarasi kesesuaian EC saat pembelian. Harga berlaku per unit. Semua informasi lainnya silakan lihat pada gambar! Pengambilan di tempat tanpa biaya. Anda akan menerima faktur resmi dengan PPN tertera saat pembelian. Kami masih memiliki banyak barang menarik lainnya untuk dijual. Silakan lihat semua iklan kami. Jika berminat atau ada pertanyaan, silakan hubungi melalui fitur pesan! Lrsdpfxow Nxcbo Aa Uol

Tahun pembuatan: 1983, Kondisi: bekas, nomor mesin/kendaraan: 7180793, Manufacturer: SAS-Zadar Model: SS Year of manufacture: 1983 Weight: approx. 4,000 kg Machine no.: 7180793 General / Technical Data: Special drilling machine for drilling into the lateral surface of a cylindrical workpiece Drilling units: 8 units Feed of drilling units: hydraulic feed via quill Drilling heads: interchangeable multi-spindle heads Workpiece diameter: approx. Ø30 to Ø40mm Workpiece length: approx. 80 to 100mm Workpiece clamping: hydraulic Cutting speed: hydraulically infinitely adjustable Machine dimensions (W x D x H): approx. 2,600 mm x 2,600 mm x 1,750 mm (excluding work area) Power supply / connected load: 380 Volt, 50 Hz Accessories / Special Equipment: • The machine is designed for large-scale series production • The machine features a sturdy machine table with chip conveyor/disposal to the underside of the table center • The drilling heads are interchangeable • The machine does not have an indexing rotary table Remarks: The machine is specifically designed for mass production. The machine is in its original paint and available for inspection at our warehouse. Lodpfx Aaswylwzo Usrl

Kondisi: baik (bekas), Tahun pembuatan: 1963, nomor mesin/kendaraan: 30769, diameter mata gergaji: 300 mm, frekuensi input: 50 Hz, tegangan masuk: 380 V, Gebrüder Heller SA 315 -WKG 972- Offered here is a saw blade grinding machine from Gebrüder Heller. Technical specifications: Saw blade diameter: 300 mm Ledpfx Aourkypja Usrl Clamping angle: 20° Lateral displacement: 73 mm Power supply / Connected load: 380 Volt, 50 Hz Serial number: 30769 Rated current: 2 A

Tahun pembuatan: 1995, Kondisi: bekas, CNC control – 11 axes Wenzler: Loading and unloading portal, CNC control: Sinumerik 810, linked to CNC control via PLC Machining center with 8 power chucks arranged vertically on a clamping drum: Currently, the MTA 8 is used for complete machining of shaft-like workpieces with a length of approx. 200 mm and a diameter of approx. 20 mm: Operations: facing – longitudinal turning – drilling – thread forming – internal hexagon whirling – external threading 6 machining stations with: ARTIS – tool monitoring 4 machining stations with: internal tool cooling Space requirement: approx. 40 m² ARTIS cutting force monitoring Complete hydraulic system and electrical cabinets Complete coolant system Emulsion cleaning unit 2 platforms Chip conveyor Oil sumps Metabo palletizing system Extraction unit Various tool holders, clamping devices Condition: very good Lodpfx Aajcqyfmo Ujrl Original price of the system 1.35 million Machine no. 306 Weight: 17 t

Kondisi: sangat baik (bekas), Tahun pembuatan: 1974, nomor mesin/kendaraan: AKK60945ASK8560, Manufacturer: Frömag Model: KZH 90 x 1500 Year of manufacture: 1974 Machine no.: AKK60945ASK8560 Weight: 1.35 t Technical Specifications: Max. drawing force: 7,000 kg Max. stroke: 1,565 mm Max. cutting speed: 2–6 m/min (infinitely variable) Lodelp Im Hspfx Aa Usrl Max. return speed: 2–6 m/min Clamping surface: 410 x 610 mm Passage width: 0 (open table) Slot width: 3–100 mm For bores from: Ø13–500 mm Pit depth beneath floor level: 2,500 mm Footprint (L x W x H): approx. 800 x 1,100 x 1,100 mm Power supply: 380 V / 50 Hz / 4.73 kW Accessories: Dividing attachment (indexing device) - TA Helical keyway broaching attachment for the production of helical keyways Serration gearing Internal gear cutting Various tools for the production of internal gears and keyways Note: Optional: The machine can also be used for profile broaching.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, -KOM 3094- A used Leuze photoelectric sensor of model MLD M is being offered here. In total, five additional sensors of the same type are available. Lrjdpfewmabbjx Aa Uol