Beli Mütek Mpp 180 bekas (6.747)

Kondisi: baru, Tahun pembuatan: 2026, en-GB Psdpfod Nm Siox Aagegr

Kondisi: hampir baru (bekas), Tahun pembuatan: 2026, jam operasional: 6 h, Masih ada satu mesin yang tersedia segera! Mesin sangat kokoh dengan daya tekan tinggi—juga cocok untuk menghasilkan kualitas briket yang bisa dijual* tergantung pada jenis material. Silinder tekan berukuran besar dan diameter briket 80 mm memungkinkan hal ini. Seri mesin briket terlaris kami + Teknologi sederhana dan teruji, sangat minim risiko kerusakan + 25 tahun pengalaman, pengembangan berkelanjutan, dan keahlian + Ribuan mesin beroperasi dengan pelanggan yang puas + Rasio harga-kinerja terbaik Biaya tambahan untuk perangkat pendingin: €4.995 net (bisa ditambahkan kemudian) * Mendinginkan tang penjepit dan oli hidrolik (direkomendasikan jika mesin beroperasi lebih dari ±3,5 jam tanpa jeda) Diameter briket: 80 mm Bushing depan: 125 mm Langkah briket max.: 100 mm Langkah briket optimal: 80 mm Kapasitas (tergantung material): hingga 200 kg/jam max.* Psdpfx Aasxfwdjgegr *tergantung berat jenis *berdasarkan berat jenis 200 kg per meter kubik Daya motor: 9,2 kW 400 Volt / 50 Hz / 3-Phase Panjang: 2095 mm Lebar: 1600 mm Tinggi: 1700 mm Berat: 1250 kg Kapasitas oli: 220 liter Diameter silo: 1200 mm Volume silo: ±1 m³ Pompa: 75 liter Pre-compactor hidrolik Opsi pendinginan tang penjepit: ya, dengan aksesoris khusus Tang Penjepit Berpendingin Opsi pendinginan oli hidrolik: ya Pendinginan tang penjepit dan oli hidrolik dengan perangkat pendingin (aksesoris khusus) Opsi pemantauan level pengisian: ya Opsi briket tipe string: ya (tergantung material) Opsi slider pengisi besar: ya, dengan aksesoris khusus slider pengisi besar Sesuai CE Persyaratan bahan baku: - Kadar air harus antara 6 hingga max. 15% - Panjang serpihan maksimal 20 mm - Suhu ruangan pemasangan minimal +5°C - Pengisian bahan harus bebas dari logam dan kontaminasi mineral seperti pasir, batu, dll. Kerusakan pada alat press dan/atau keausan yang meningkat bisa terjadi jika tidak memenuhi ketentuan ini.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2026, Our best-selling briquetting press – the classic model. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras (at additional cost): * Surcharge for fill level sensor for automatic operation: + €995 net * Surcharge for large pre-compaction chamber: + €970 (recommended for very light materials such as straw; machine width increases by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (depending on material): up to 60 kg/h* *Depends on bulk density Pedsgl Nlmspfx Aagogr *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Cooling option for pressing pliers: no Cooling option for hydraulic oil: yes Fill level monitoring option: yes CE compliant Material requirements: - Moisture content (atro) must be between 6% and 18% - Maximum chip length: 15 mm - Installation temperature: temperate room at a minimum of +5°C - Customer is responsible for preventing hydraulic oil loss - Feeding material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Kondisi: baru, Tahun pembuatan: 2026, Production time approx. 4-5 months --- Our best-selling briquetting press series Psdpfochqxxox Aagogr + Proven, straightforward technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust construction, ensuring consistent briquette quality during continuous operation. The compaction process is performed without the addition of binding agents, relying solely on hydraulic pressure. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard hopper has a volume of approximately 0.5 m³. Hoppers with larger capacities or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. Depending on specific customer requirements, MPP NEM single units can be combined to create a complete system. The press’s chip container can be loaded manually, by conveyor belt, via extraction system, or with a tipping skip. For systems designed for fully automated operation, it is advisable to use a lift-tipping device in combination with a crusher. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of each briquette is 40 to 75 mm depending on the model, and the diameter, according to type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing coolant, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length are loaded into the storage hopper. A stirrer at the bottom of the hopper prevents material bridging and feeds material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the press block. The main press cylinder then compacts the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves up, and the stable briquette is ejected. Briquette production offers the following advantages: • Reduction of material volume by up to 90% • Emulsion recovery • Cost savings in storage and transportation • Economical disposal • Profitable resale -- Briquetting Press NEM 300 Throughput capacity: up to approx. 200 kg per hour *heavily dependent on material type. - On the last test with aluminium granulate under 5 mm – approx. 186 kg per hour + the recovered emulsion. - On the last test with aluminium shavings under 18 mm – approx. 120 kg per hour + the recovered emulsion. Technical data: Motor: 7.5 kW (+ 0.55 kW for cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Opt. briquette stroke: 80 mm Pump: 80 litres Storage hopper: approx. 0.5 m³ capacity (expandable)

Kondisi: baru, Tahun pembuatan: 2026, * Options available at additional cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality even in continuous operation. The pressing process is carried out solely by hydraulic pressure, without any binding agents. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation under existing extraction and filter systems as complete disposal units are also available. MPP NEM machines can be combined into a system based on customer requirements. The chip hopper of the press can be fed manually, via conveyor belt, extraction system, or with a tipping skip. For fully automated operation, the use of a lifting/tipping device in conjunction with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm; the diameter, depending on the type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a drip tray, allowing coolants, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length can be loaded into the press's storage hopper. A stirring unit at the bottom of the hopper prevents bridging and moves the material into the pre-compaction chamber. Within this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main pressing cylinder compresses the material against a vertical slide until the preset pressure is reached. The vertical cylinder then lifts, and the compact briquette is ejected. The more homogeneous the input material, the more uniform the briquette length. Briquetting offers the following advantages: •Reduction of volume by up to 90% •Emulsion recovery •Cost savings in storage and transport •Cost-effective disposal •Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to max. 350 kg/h (material dependent; chip length less than 10 mm) Last test with aluminum chips less than 18 mm – approx. 260 kg/h *more details after a free test with your material Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 liters per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm (L x W x H) Weight: 2250 kg Hydraulic precompaction via slide Main press cylinder Pgsdpfxogfm Ryo Aagjr Vertical cylinder Prepared for connection to a cooling unit

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2023, en-001 Psdpfx Aaod N Dnhjgsgr

Kondisi: baru, Tahun pembuatan: 2026, Production time for the machine is approx. 3.5 months Very robust machine with high pressing force - also suitable for producing a marketable briquette quality* depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers Pgodpsffh Atjfx Aagor + Excellent price-performance ratio Optional features: Surcharge for cooling unit: + €3,995 net (can also be retrofitted later) * Cools the pressing jaw (important for operations over 3.5 hours) and the hydraulic oil * Cooling unit recommended for continuous operation exceeding 3.5 hours at a time. Large pre-compactor chamber: + €1,975 net Recommended for light input materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (material-dependent): up to 110 kg/h* Last test: approx. 87 kg/h *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil capacity: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 cbm Pump: 37 liters Hydraulic pre-compactor Option for cooled pressing jaw: yes, with special accessory cooled pressing jaw Pressing jaw cooling via water tank (to be supplied by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette strand option: yes (material-dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and no more than 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Special price for trade show machine *Available by arrangement New: With the frequency inverter option, eligible for up to a maximum of 45% government funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock, they only need to be connected together 1. Technical Data – Briquetting Press: Our best-selling briquetting press – the classic. + Proven, simple technology for extremely low failure rates Pjdpfjd Su Hxex Aagegr + 25 years of experience, ongoing development and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity tariff number: 84793010 Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput capacity (material-dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter . Motor output: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Total system footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height – 2.8 m (special container) Delivery possible in 2 components Weight: approx. 1200 kg Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compactor Press clamp cooling option: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant 2. Technical Data – Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when facing the dust bin) Residual dust content:

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Dalam penawaran ini, Anda akan mendapatkan sistem produksi warna bekas "Xerox Versant 180 Press". Objek penjualan: 1 x Xerox Versant 180 dengan perlengkapan berikut: termasuk Fiery Server EX180 termasuk Paperdeck A-CF03 Pgodpfxszvphge Aagor termasuk Bookletfinisher A-FN13 termasuk Stacker termasuk unit penambah Apakah perlengkapan ini tidak sesuai dengan kebutuhan Anda? Tidak masalah, mesin dapat dikonfigurasi sesuai keinginan Anda. Jangan ragu untuk menghubungi kami! Jumlah cetakan: Total: Sekitar 325.502 halaman Warna: Sekitar 269.199 halaman Hitam: Sekitar 83.303 halaman Kondisi: Penawaran ini adalah untuk perangkat bekas, yang mungkin memiliki tanda-tanda penggunaan (goresan kecil atau perubahan warna). Perangkat telah diuji fungsinya. Contoh hasil cetak dapat dilihat pada foto. Pengemasan dan pengiriman: Anda dapat melihat perangkat ini selama jam kerja kami. Silakan buat janji temu! Pengemasan yang tahan air dan pengiriman ke seluruh dunia tersedia berdasarkan permintaan! Sebelum pengiriman atau pengambilan, uji fungsi akan direkam dalam bentuk video untuk Anda. Untuk informasi lebih lanjut, Anda tentu saja dapat menghubungi kami secara langsung.

Kondisi: baik (bekas), Nagel Citoborma 180 Mesin Pelubang Kertas Mesin ini 100% berfungsi dengan baik. Ini adalah model terbaru. Meja bor dapat diatur ke segala arah (samping, depan/belakang). Dilengkapi dengan penahan untuk pengaturan jarak pengeboran. Meja terpasang adalah versi yang diperbesar. Selain itu, bor memiliki pengunci meja otomatis yang akan terbuka setelah setiap siklus. Kondisi sangat baik. Konstruksi kokoh – berat 65 kg. Daya listrik 230V Pedpfx Aozt H N Aoagegr Satu kepala bor. Diameter bor 2-20 mm. Tinggi tumpukan 60 mm. Mesin telah diservis. Termasuk mata bor, peralatan, stik pemotong baru, dan buku petunjuk.

Kondisi: baik (bekas), Bekas, kondisi bagus. Mesin bekas yang telah diperiksa secara teknis. Mesin dasar mulai dari €135.000 (belum termasuk pajak) *Opsi dengan biaya tambahan, lihat di bawah Waktu pengiriman sekitar 7 minggu setelah pemesanan Mesin pembuatan briket, misalnya untuk debu kayu, sekam gandum, bahan hiburan (misalnya untuk babi untuk bermain dan menggerogoti), pakan ternak, alfalfa, atau serpihan kayu. *Secara opsional, tablet briket kecil dapat diproduksi. Data teknis: Kapasitas hingga maksimum 750 kg/jam (tergantung pada material) (misalnya, serbuk gergaji dengan berat volume 250 kg/m³) Pernyataan yang tepat tentang kapasitas hanya dapat diberikan setelah pengujian dengan material Anda. Dapat sangat bervariasi tergantung pada berat volume material awal. Nomor tarif barang: 84793010 Diameter briket: 65 mm Termasuk saluran penekan 2 m Daya motor motor utama: 37 kW Motor penggerak ulir pemuatan: 2,2 kW Motor penggerak ulir pemadat: 5,5 kW Pgedpfsfmqq Esx Aagsr Motor pompa hidrolik: 0,37 kW Total daya yang dibutuhkan: sekitar 47 kW Panel kontrol dengan tampilan teks jelas untuk kondisi operasi dan indikator beban untuk penggerak utama dan ulir pemuatan Pengontrol PLC dengan penghitung jam operasi di dalam lemari kontrol Mesin memiliki tanda CE Fungsi mulai-berhenti otomatis Dimensi: 3100x860x1800 mm (panjang x lebar x tinggi) Berat: 3800 kg Opsi dengan biaya tambahan: Unit pengatur suhu untuk alat penekan untuk menjaga suhu agar kualitas briket optimal. Pengontrol suhu untuk pompa, unit pendingin, kipas, dan presostat Tersambung dan siap digunakan - wajib untuk pengoperasian termasuk pengontrol yang sesuai + €7.850 (belum termasuk pajak) Mesin pemotong atau penghancur tablet, untuk memotong briket + €6.900 (belum termasuk pajak) Diperlukan sambungan udara bertekanan! Silo untuk seri MAP + €19.940 (belum termasuk pajak) - Silo penyimpanan di atas mesin - Kapasitas sekitar 6 m³, konstruksi baja yang stabil dengan pengeluaran pengaduk dan indikator level. Saluran pengangkutan / jalur pendingin (nilai nominal: 4x2 m) setiap 2 meter €990 (belum termasuk pajak) Pemasangan / Peluncuran (nilai nominal sekitar 2-3 hari di lokasi) biaya berdasarkan upaya dan akan ditagihkan secara terpisah. Berlaku ketentuan berikut: Teknisi servis/mekatronika per jam pemasangan dan perjalanan: €129,00 Lembur: Tambahan 25% Per jam Sabtu dan malam: Tambahan 50% Per jam Minggu dan hari libur: Tambahan 100% Biaya per teknisi per hari: tergantung negara Per perjalanan mobil dan mobil van dan kilometer: €0,98 / km Biaya perjalanan dan akomodasi akan dibebankan kepada klien dengan bukti atau biaya tetap. Pengujian dengan material pelanggan masing-masing: (setelah perjanjian, hingga maksimum 750 kg) - €1.970 (belum termasuk pajak) . Persyaratan untuk bahan baku: - Kadar air (atro) harus antara minimal 6% dan maksimal 15% - Panjang serpihan maksimal 18 mm - Suhu ruangan: ruangan dengan suhu terkontrol minimal +5°C - Bahan baku harus bebas dari logam dan kotoran mineral. Kerusakan pada alat penekan dan/atau peningkatan keausan dapat terjadi.

Kondisi: baik (bekas), Mesin Bekas yang Telah Direkondisi Mesin dasar mulai dari €145.000 (netto) *Opsi dengan biaya tambahan, lihat di bawah dengan garansi penuh selama 1 tahun *tersedia satu mesin segera Data teknis: Kapasitas pemrosesan hingga maksimal 1200 kg/jam, tergantung pada material (misalnya, serbuk gergaji dengan berat jenis 180 kg/m³) Diameter briket 75 mm termasuk saluran pemadat sepanjang 2 m Daya motor motor utama 45 kW Motor penggerak pengumpan 2 x 2,2 kW Motor penggerak pemadat 2 x 5,5 kW Motor penggerak pendistribusi 2,2 kW Motor pompa hidrolik 0,37 kW Total daya yang dibutuhkan 65 kW Panel kontrol dengan tampilan teks yang jelas untuk kondisi operasi dan indikator beban untuk motor utama dan pengumpan Kontrol PLC Siemens S7/300 dengan penghitung jam operasi di panel kontrol Mesin memiliki tanda CE Fungsi start/stop otomatis Dimensi 3100x860x1800 mm (pxlxt) Berat 4500 kg Opsi: Silo untuk seri MAP (hanya cocok untuk mesin tipe MAP 1200) - Silo penyimpanan di atas mesin - Kapasitas sekitar 6 m³, konstruksi baja yang stabil dengan sistem pengeluaran pengaduk dan sensor level. €19.700 (netto) ditambah PPN -Unit pengatur suhu untuk alat pemadat untuk mempertahankan suhu agar kualitas briket optimal. Pengatur suhu untuk pompa, unit pendingin, kipas, presostat Siap dipasang - sangat penting untuk pengoperasian termasuk kontrol yang sesuai €7.850 (netto) -Gilotina, untuk memotong briket sesuai ukuran Koneksi udara bertekanan diperlukan di lokasi €6.940 (netto) ditambah PPN -Saluran pengangkutan / jalur pendingin (nilai nominal: 4x2m) setiap 2 meter 990 Euro (netto) Pemasangan / pengoperasian (nilai nominal per mesin sekitar 2-3 hari di lokasi) biaya dihitung berdasarkan waktu yang dibutuhkan dan ditagihkan secara terpisah. Berlaku ketentuan berikut: Teknisi servis / ahli mekatronika per jam pemasangan dan perjalanan: €129,00 Lembur: Tambahan 25% Untuk setiap jam kerja pada hari Sabtu dan malam hari: Tambahan 50% Untuk setiap jam kerja pada hari Minggu dan hari libur: Tambahan 100% Biaya per teknisi per hari: tergantung negara Untuk setiap kilometer perjalanan dengan mobil dan truk: €0,98 / km Biaya perjalanan dan akomodasi dibebankan kepada pelanggan dengan menunjukkan bukti atau dikenakan biaya tetap. Pengujian dengan material pelanggan: (setelah kesepakatan, hingga maksimal 750 kg) - €1.970 (netto) biaya tetap ---- Persyaratan untuk bahan baku: - Kadar air (atro) harus antara minimal 6% hingga maksimal 18% - Panjang serpihan maksimal 20 mm Pgodpfxs E Dqus Aagsr - Suhu pemasangan: ruangan dengan suhu terkontrol minimal +5°C - Bahan baku harus bebas dari logam dan kontaminan mineral. Kerusakan pada alat pemadat dan/atau peningkatan keausan dapat terjadi.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2026, Special offer for our demonstration machine Another unit available immediately (ex works Neckartailfingen) approx. 8 operating hours. Suitable for shredding all types of residual wood and also pallet sections. Pallets must be prepared with a jigsaw or chainsaw so that they fit upright into the hopper – see photo 2. Ideally, they should measure approx. 40x20x20 cm, so that the wood can lie flat on the pusher floor. This is when the machine operates most efficiently. A hydraulically operated pusher moves along the base of the shredder and presses the material against the rotor based on load. The material is shredded until it passes through the screen basket. Throughput capacity: up to 200 kg per hour (*depending on the screen and preparation of the material). *Conveyor belt and overband magnet available at an extra charge. + powerful 18.5 kW motor + concave knives + large high-performance gearbox + special load-dependent pusher control Customs tariff number: 84659600 Motor: 18.5 kW; 400 V – 50 Hz – 3 ph. Knives: 15 pieces, rotatable multiple times Optional double knife row: + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation selectable (10–30 mm) Extraction port: Ø 160 mm Weight: approx. 1,300 kg (depending on equipment) Dimensions (LxWxH): approx. 1,737 x 1,167 x 1,650 mm Moisture content: < 30% atro Standard features: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - Rapid hydraulics - Auto stop when rotor idles - Rotor speed 70–90 rpm for high throughput - Cycling control to avoid idle times - Performance-boosting step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Shredder height increase by 30 cm (conveyor belt preparation): + €2,080 net - Folding conveyor belt: + €8,770 net Pjdpedwktkefx Aagjgr Horizontal section: 1,200 mm Inclined section: 2,500 mm Angle: adjustable 0–60° Discharge height: approx. 2,000 mm +/- 100 mm - Overband magnet: + €5,980 net - Control system for conveyor & overband magnet: + €2,750 net (Start and stop synchronized with chipper) - Hopper extension: + €940 net - Eco rings: + €1,980 net (recommended for >15% hardwood) - Special scraper: + €990 net (recommended for veneer or paper) - Double knife row: + €995 net Raw material requirements: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc., cause increased wear.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2026, Demonstration machine with approx. 9 operating hours Another unit available immediately (ex works Neckartailfingen) *Options available at extra cost – see below Included: + Profile rotor for increased throughput performance We are happy to offer a free trial with your own material. I invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can ship your material to us by freight, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Knives: 15 units, multiple reversible, Optional double knife row + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume approx. 0.6 m³ Hydraulically actuated pusher Screen perforation as desired (10-40 mm) Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm Moisture content: < 30% ATRO. Standard features included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta start - Fast hydraulics - Automatic shut-off when rotor is idling - Speed 70–90 rpm for high throughput rates - Cycle control to prevent idle times - Performance-enhancing step control of hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant Optional shredder upgrades available at extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Eco rings: + €1,980 net (Recommended for more than 20% hardwood content) Pgodpfxeb Ny Eye Aagsr - Double knife row + €995 net - Special scraper + €990 net (Recommended for shredding veneer or paper, or materials less than 3 mm thick) - Angled conveyor belt + €8,770 net Angle: adjustable from 0–60 degrees Discharge height: approx. 2,000 mm - Automatic over-belt magnet + €5,980 net Alternatively, fixed magnet block above the conveyor for manual cleaning + €990 net (for minimal metal contamination) - Conveyor and over-belt magnet control + €2,750 net (Start/stop synchronised with shredder), alternatively manual start/stop of belts + €595 net Raw material requirements: - Moisture content (ATRO) must be under 30% - Installation temperature: temperature-controlled area, minimum +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Tahun pembuatan: 2026, Kondisi: baru, Granulator MVZ 7.5 kW Demonstration unit available at a special price Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic parts or for post-shredding of wood chips. Further details can be provided after testing with your specific material. Our granulators are used for processing a wide range of materials, such as plastics or wood. Shredders and granulators are suitable for various size-reduction applications. For example, in injection molding, rejects and sprues are produced that need to be reprocessed. In blow molding, in addition to rejects, there are parisons or start-up waste. The system can process blow molding materials such as PET bottles, PE/PP bottles, canisters, buckets, pipes, and more. Material is fed from above via a hopper into the cutting chamber of the granulator. Inside, a rotor equipped with cutting knives shreds the material between the rotating knives and the stationary counter-knives mounted in the chamber until it passes as regrind through the screen located below the rotor. *Option: The ground material is usually transported pneumatically into big bags, silos, or other containers. The price applies only to the shredding plant as shown in image 1 - fan, cyclone, and filter are optional. --- Technical Data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger systems available on request (4 to 75 kW) Throughput up to 120 kg/h when shredding plastics *highly dependent on screen size and material Application example: Shredding PE 1000 plastic Input material: approx. 40 mm chip length Post-shredding to approx. 6 mm Throughput up to 50 kg/h with 6 mm screen (Throughput up to 80 kg/h with 8 mm screen) ___ For G30 wood chip post-shredding, much higher throughputs can be achieved: Up to a maximum of 400 kg/h with a 10 mm screen, *metered feed, e.g., via conveyor or auger. Further details after testing approx. 30 kg sample. Rotor diameter: 180 mm 6 rotor knives, each 225 mm 4 stator knives, each 225 mm Pgedpjd N Dn Djfx Aagsr Dimensions: 930x730x1420 mm Weight: 450 kg Suction connection: 100 mm Screens: 5, 6, 8, 10, 12, and 15 mm - additional screen sizes available Price per screen: €390 Price for replacement knife set: €679 Suitable for, for example: - All types of plastic waste Various materials: HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs, etc. Parts from injection molding, blow molding, sprue waste, small bottles, cables, small pipes, profiles, etc. --- Larger systems also available as an option: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *depending on screen and material Infeed opening: 620x400 mm *Optional with matching extraction/transport system Granulator MVZ / 30 kW Throughput up to 400 kg/h *depending on screen and material Infeed opening: 620x500 mm *Optional with matching extraction/transport system --- For system design, the following information is important: - Length x width x height of the input material? - Screen size: what final particle size (mm) is required? - Required throughput per hour (kg)? - Wall thickness (mm)? - Material description Photos can also be helpful.

Tahun pembuatan: 2021, Kondisi: baik (bekas), 1 complete granulation line, cutter-compactor/extruder combination, tangential design, operated only in single-shift mode since 2021 with production waste, e.g., DPE regrind/aluminum (pipe material) The plant consists of: - Hydraulic roll cutter, 140 cm width for roll diameters up to 60 cm, 18.5 kW drive - Erema conveyor belt with metal detector bridge, 900 cm x 110 cm, with timer - Wagner WS30 shredder, 30 kW, rotor width 140 cm with hydraulic pusher, rotor with 74 reversible cutting crowns, discharge and inclined conveyor screw - Roll feed for heavy rolls with longitudinal cutting unit to relieve the mill, frequency-controlled 3.5 kW drive - Cutting mill 11 kW, connected downstream for parallel operation with shredder/roll feed, extraction/conveying blower to buffer silo with agitator, frequency-controlled for discharge rate/dust coverage - Feed screw for ground materials - Conveyor belt L 9 m x W 80 cm, metal detector bridge, frequency-regulated via load intake from the cutter-compactor - Conveyor screw for 100% ground materials, stainless steel, L 4.5 m and 100 mm diameter Pjdozb Dr Sspfx Aagsgr - Cutter-compactor 138 kW, frequency-controlled, extraction blower, water spray cooling, tangentially connected to - Extruder ES 180 mm, 30 L/D with double vacuum degassing, incl.: - Laser filter LF, 500 mm diameter, 2-disc system, discharge screw for contaminants with timer, melt pressure sensor, replacement screens: 2x 60 mesh, 2x 70 mesh - Strand die with 26 holes – interchangeable dies, year of manufacture 2021, melt pressure sensor, complete overhaul/replacement of wearing parts scheduled for January 2026 - Strand cooling water tank, L 700 cm x W 70 cm, stainless steel. Strand rollers made of plastic with stainless steel ball bearings, height-adjustable, year of manufacture 2023 - Strand pelletizer SG 200 E with 7.5 kW, plus 1x spare pelletizer 5.5 kW for quick changeover during maintenance or cleaning - Pellet classifier sieve, stainless steel incl. blower and piping - BIG BAG filling frame, 2 stations with stairway and platform - BIG BAG floor scale with receipt printer Throughput depending on material, up to 900 kg/h Start-up and commissioning by our technicians, details and costs upon request – subject to agreement Plant inspection in Wuppertal, appointments available at short notice by arrangement

Kondisi: sangat baik (bekas), 7649 Pgjdpfjzrm T Sex Aagjr

Kondisi: sangat baik (bekas), CATALOG NUMBER 72133 TECHNICAL DATA - Maximum cutting height: 180 mm - Track width: 400 mm - Shaft width: 370 mm - Shaft diameter: 60 mm - Maximum blade diameter: 300 mm - Blade bore diameter: 80 mm - Minimum workpiece length: 630 mm - Maximum workpiece width: 600 mm From above: - Pneumatic hold-down - Pawls - 2x metal pressure rollers Pgjdpezrmn Asfx Aagor - Pawls - Saw shaft - Smooth pressure roller - Pawls - Smooth pressure roller From below: - 2x metal, toothed feed rollers - Pawls - Track - Saw shaft - Track - Stepless feed speed adjustment via frequency inverter - Main motors: 2x55 kW - Feed motor: 4 kW - Hydraulic raise/lower of housing - Hydraulic adjustment of saw shafts - Pump motor: 0.37 kW - Centralized lubrication - Extractor hood diameter: 1x300 mm, 1x380 mm - Dimensions (LxWxH): 3200x2350x2000 mm - Weight: approx. 5500 kg ADVANTAGES – Made in Italy – Dual-shaft – Used multi-blade saw, very good condition Net price: PLN 238,900 Net price: EUR 56,880 Net price calculated at exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, With this offer, you acquire a pre-owned color production system "Xerox Versant 180 Press" Scope of delivery: 1 x Xerox Versant 180 with the following configuration: - incl. Fiery Server EX180 - incl. Paperdeck A-CF03 - incl. Booklet Finisher - incl. Squarefold + Front Trimmer Looking for a different configuration? No problem – we can configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: approx. 2,573,792 pages Color: approx. 2,368,409 pages Black: approx. 205,383 pages Condition: This offer is for a used device, which may show signs of use (such as minor scratches or yellowing). Pgjdpfxovtpnlo Aagsr - The device has been functionally tested - A test printout is visible in the photos Packaging and shipping: You are welcome to inspect the device during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping are available upon request! Before shipping or collection, the functional test will be recorded on video for you. For further information, please feel free to contact us directly.

Kondisi: sangat baik (bekas), Weiss WT-1300/70/15 Lemari Uji Suhu Produsen: Weiss Umwelttechnik GmbH Tipe: WT-1300/70/15 Lemari uji suhu berpendingin air dengan kontrol panel sentuh, digunakan untuk pengujian suhu dalam penelitian, pengembangan, penjaminan kualitas, dan industri. Spesifikasi Teknis Rentang suhu: -70 °C hingga +180 °C Volume ruang uji: sekitar 1.340 liter Kecepatan perubahan suhu pemanasan: 15 K/menit Kecepatan perubahan suhu pendinginan: 10 K/menit Penyimpangan suhu waktu: ± 0,1 hingga ± 0,5 K Homogenitas suhu ruang: ± 0,5 hingga ± 2 K Dimensi ruang uji: Tinggi 920 mm Lebar 1.100 mm Kedalaman 1.330 mm Dimensi luar: Tinggi sekitar 2.050 mm Lebar sekitar 1.300 mm Kedalaman sekitar 3.200 mm Beban uji yang diizinkan: Lantai ruang uji 150 kg Rak 50 kg Data Listrik Tegangan nominal: 3/N/PE AC 400 V ±10 % 50 Hz Arus nominal: 63 A Daya nominal: 44 kW Sistem Pendingin Refrigeran R404A: 14,0 kg Refrigeran R23: 5,4 kg R404A LP maks.: 18 bar R404A HP maks.: 25 bar R23 LP maks.: 19 bar R23 HP maks.: 25 bar Tekanan tetap: 18,5 bar Fitur Kontrol panel sentuh Ruang uji dari stainless steel Beberapa tingkat rak Saluran samping Segel pintu berpemanas Unit pendingin berpendingin air Koneksi CEE Tanda CE Berat: sekitar 1.500 kg Kondisi Unit bekas dari penggunaan industri. Kondisi visual sesuai gambar. Demi keamanan pelanggan kami, pekerjaan berikut dilakukan sebelumnya pada ruang uji iklim yang ditawarkan: 1. Pemeriksaan fungsi serta penggantian komponen yang diperlukan 2. Isi ulang refrigeran sesuai ketentuan peraturan jika diperlukan 3. Uji kebocoran dengan sertifikat 4. Uji coba dokumentasi setelah pemeriksaan berhasil Ruang lingkup pengiriman: lihat gambar Pgodpfeza Dv Isx Aager Pengiriman atau pengiriman melalui ekspedisi dimungkinkan. Perubahan, kesalahan, dan penjualan antara waktu dapat terjadi. Untuk pertanyaan lebih lanjut silakan hubungi via telepon.

Kondisi: baik (bekas), TS -70/1000-10 Type For sale: CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit, Compressor has been replaced! Equipment: - Multi-touch control - USB and Ethernet interfaces - Feedthroughs for test cables 4 × Ø 125 mm - Safety temperature limiter Application areas: - Environmental and lifetime testing - Temperature cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, material testing Test chamber volume: 1,000 liters Internal dimensions: Height approx. 1,000 mm, width approx. 860 mm, depth approx. 1,100 mm External dimensions: Height approx. 1,950 mm, width approx. 1,270 mm, depth approx. 1,900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Pjdpjziizyofx Aagegr Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Nominal power: approx. 23.1 kW Nominal current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your safety as the buyer, please note! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data reserved!) We are happy to answer any further questions you may have by phone.

Kondisi: sangat baik (bekas), Weiss Type: WK3-340/70 Weiss Climate Test Chamber, Air-cooled Control unit: "Touchpanel" All control and operating commands can be triggered by simply touching the function symbols on the "Touchpanel" control unit. Leveling Feet To compensate for floor unevenness and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Cable Ports The test chamber is equipped with cable ports on both the right and left sides. These ports allow measurement cables and test equipment to be routed into the test space. Standard cable ports installed: Pgjdjziiwujpfx Aagjr R1: NW 125 mm L1: NW 85 mm Volume: 335 liters Test chamber internal dimensions: Height: 750 mm, Width: 580 mm, Depth: 765 mm External dimensions: Height: 1775 mm, Width: 870 mm, Depth: 1600 mm Specifications for temperature testing: Minimum temperature: –72°C Maximum temperature: +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate, cooling: 3 K/min Temperature change rate, heating: 3 K/min Specifications for climate testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% r.h. Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1 K Temporal humidity deviation: ± 1 to ± 3% r.h. Operating data: Test chamber lighting: Halogen lamp 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A Rated power: 4.9 kW On-site fuse: 16 A slow-blow Refrigerant: R-452A/R23 Weight: approx. 585 kg Safety information for buyers: The following steps are carried out on our offered chambers in advance for your safety: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant as required 3. Leak test with certificate 4. After successful checks, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to technical modifications and errors in specifications!) If you have further questions, we will be happy to answer them by phone.

Kondisi: hampir baru (bekas), Mesin yang telah direkondisi secara umum Harga: 4.000 EUR Mixer adonan Produsen: Diosna Dengan paddle Mangkok stainless steel Volume: 180 liter Dimensi: 90x95x135 cm Pedpfxox N Egbs Aagegr Daya listrik: 3,5 kW Tegangan: 380 V 50 Hz

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, *Video hanya sebagai contoh bagaimana menyiapkan sel ini Sel dengan robot penggerinda Kuka KR 180 Sel penggerindaan Berger 2012 (Penggerindan luar A1) Pgodpfx Aaog Saqvogsr - Bobot total sekitar 6300 kg - Dimensi sel: sekitar 4650 x 2400 x 3100 mm Robot 6 sumbu Kuka KR 180 R2500 Extra - Tahun pembuatan: 2011 - Kontrol KRC 4 - sumbu tambahan (sumbu ke-7) Stasiun penggerinda sabuk BSS10 - Dimensi maksimum sabuk 3500 x 30 mm - Diameter roda kontak maksimum 200 mm - Daya motor 4 kW 2 x stasiun pemoles, - Diameter cakram pemoles 350 - 600 mm - Daya 5,5 kW Lemari penukar gripper Konveyor sabuk Interoll Automation GmbH - Panjang total sekitar 2000 mm - Lebar sabuk sekitar 440 mm Kami memiliki 4 sel seperti ini.

Kondisi: seperti baru (mesin pameran), Unit demo dengan 7 jam operasional tersedia segera (dari pabrik Neckartailfingen) Mesin penghancur MRZ 830 Nomor tarif barang: 84659600 Tahun pembuatan: 2023 Bukaan umpan 800x1000 mm Motor: 22 kW; 400 V - 50 Hz - 3 fasa Pisau: dapat diputar berulang kali Penggeser yang dioperasikan secara hidrolik Pgsdsv Sqrpspfx Aagjr Lubang saringan sesuai pilihan (10 - 40 mm) Berat sekitar 1.600 KG Dimensi (p x l x t) sekitar 2290 x 1420 x 1750 mm Kopling turbo Termasuk sebagai standar: - pengaktifan otomatis bintang/segitiga - hidrolik cepat - mati otomatis saat rotor tidak beroperasi - kecepatan putaran 70-90 RPM untuk kapasitas tinggi - kontrol siklus untuk menghindari waktu tidak aktif - kontrol langkah yang meningkatkan kinerja penggeser hidrolik - panduan Pertinax untuk penggeser hidrolik - kaki mesin peredam getaran - Sesuai dengan standar CE Mesin penghancur ini dirancang untuk menghancurkan kayu alami, papan serpihan, dan papan MDF, serta bahan lain setelah diuji dan disetujui oleh produsen. Termasuk: - Menaikkan mesin penghancur setinggi 30 cm (persiapan untuk konveyor) Opsi tambahan untuk mesin penghancur: - Konveyor bengkok + 8.770 € (belum termasuk PPN) Bagian horizontal: 1200 mm Bagian yang menanjak: 2500 mm Sudut: dapat disesuaikan dari 0-60 derajat Tinggi pengeluaran: sekitar 2000 mm + - 100 mm - Magnet di atas konveyor + 6.780 € (belum termasuk PPN) - Kontrol untuk konveyor dan magnet di atas konveyor + 2.750 € (belum termasuk PPN) (Mulai dan berhenti masing-masing disinkronkan dengan mesin penghancur) Persyaratan untuk bahan baku: - Kadar air (atro) harus di bawah 30%, - Logam dan kontaminan mineral seperti pasir, batu, dll. akan menyebabkan peningkatan keausan.