Beli Mütek Mpp 280 bekas (2.556)

Kondisi: baru, Tahun pembuatan: 2026, * Options available at additional cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality even in continuous operation. The pressing process is carried out solely by hydraulic pressure, without any binding agents. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation under existing extraction and filter systems as complete disposal units are also available. MPP NEM machines can be combined into a system based on customer requirements. The chip hopper of the press can be fed manually, via conveyor belt, extraction system, or with a tipping skip. For fully automated operation, the use of a lifting/tipping device in conjunction with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm; the diameter, depending on the type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a drip tray, allowing coolants, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length can be loaded into the press's storage hopper. A stirring unit at the bottom of the hopper prevents bridging and moves the material into the pre-compaction chamber. Within this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main pressing cylinder compresses the material against a vertical slide until the preset pressure is reached. The vertical cylinder then lifts, and the compact briquette is ejected. Cedpfjgfm Ryjx Am Ijgt The more homogeneous the input material, the more uniform the briquette length. Briquetting offers the following advantages: •Reduction of volume by up to 90% •Emulsion recovery •Cost savings in storage and transport •Cost-effective disposal •Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to max. 350 kg/h (material dependent; chip length less than 10 mm) Last test with aluminum chips less than 18 mm – approx. 260 kg/h *more details after a free test with your material Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 liters per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm (L x W x H) Weight: 2250 kg Hydraulic precompaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Kondisi: baru, Tahun pembuatan: 2026, Our best-selling briquetting press – the classic model. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras (at additional cost): * Surcharge for fill level sensor for automatic operation: + €995 net * Surcharge for large pre-compaction chamber: + €970 (recommended for very light materials such as straw; machine width increases by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (depending on material): up to 60 kg/h* *Depends on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Codogl Nlmopfx Am Iegt Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Cooling option for pressing pliers: no Cooling option for hydraulic oil: yes Fill level monitoring option: yes CE compliant Material requirements: - Moisture content (atro) must be between 6% and 18% - Maximum chip length: 15 mm - Installation temperature: temperate room at a minimum of +5°C - Customer is responsible for preventing hydraulic oil loss - Feeding material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Kondisi: baru, Tahun pembuatan: 2026, en-GB Cedsd Nm Siopfx Am Isgt

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2023, en-001 Codpfx Amod N Dnhs Iegt

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Special price for trade show machine *Available by arrangement New: With the frequency inverter option, eligible for up to a maximum of 45% government funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock, they only need to be connected together 1. Technical Data – Briquetting Press: Our best-selling briquetting press – the classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity tariff number: 84793010 Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput capacity (material-dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter . Motor output: 5.5 kW, Cgjdpfx Asd Su Hxjm Ijt 400 Volt / 50 Hz / 3-phase, Total system footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height – 2.8 m (special container) Delivery possible in 2 components Weight: approx. 1200 kg Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compactor Press clamp cooling option: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant 2. Technical Data – Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when facing the dust bin) Residual dust content:

Kondisi: baru, Tahun pembuatan: 2026, Production time for the machine is approx. 3.5 months Very robust machine with high pressing force - also suitable for producing a marketable briquette quality* depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional features: Surcharge for cooling unit: + €3,995 net (can also be retrofitted later) * Cools the pressing jaw (important for operations over 3.5 hours) and the hydraulic oil * Cooling unit recommended for continuous operation exceeding 3.5 hours at a time. Large pre-compactor chamber: + €1,975 net Recommended for light input materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (material-dependent): up to 110 kg/h* Last test: approx. 87 kg/h *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil capacity: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 cbm Pump: 37 liters Hydraulic pre-compactor Csdpfx Ajffh Atom Iogt Option for cooled pressing jaw: yes, with special accessory cooled pressing jaw Pressing jaw cooling via water tank (to be supplied by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette strand option: yes (material-dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and no more than 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur.

Kondisi: baru, Tahun pembuatan: 2026, jam operasional: 8 h, en-GB Codpfexfwdex Am Iegt

Tahun pembuatan: 2025, Kondisi: baru, Granulator MVZ 7.5 kW Demonstration machine available at a special price Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic parts or for secondary size reduction of wood chips. Further details available after testing with your material. Our granulators are used for reducing the size of numerous materials such as plastics or wood. Shredders and granulators are suitable for a wide variety of size reduction tasks. For example, injection molding machines generate reject parts and sprues that need to be reprocessed. At blow molding machines, besides reject parts, excess material and start-up waste are produced. Materials that can be processed include blow-molded items such as PET bottles, PE/PP bottles, canisters or buckets, and pipes. Material is fed from above through a hopper into the granulation chamber. The internal rotor is fitted with cutting blades. The material is shredded between the rotating blades and the stationary knives fixed to the chamber housing until it passes as defined regrind through a screen situated below the rotor. *Option: The granulated material is usually transported further via pneumatic conveying into big bags, silos or other containers. The price is valid only for the granulator system shown in image 1. - Fan, cyclone and filter are optional. --- Technical Specifications: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger systems available upon request (4 to 75 kW) Throughput up to 120 kg/h when processing plastics *extremely dependent on screen and material type Application example: Shredding of PE 1000 plastic Feed material: approx. 40 mm chip length Secondary size reduction to approx. 6 mm Throughput up to 50 kg/h with a 6 mm screen (Throughput up to 80 kg/h with an 8 mm screen) Very much higher throughputs are possible for G 30 wood chips secondary shredding. Up to max. 400 kg/h with a 10 mm screen.*provided metered feeding, e.g. via conveyor belt or screw conveyor. Details after testing with approx. 30 kg. Rotor diameter: 180 mm 6 rotor blades, each 225 mm 4 stator blades, each 225 mm Dimensions: 930x730x1420 mm Weight: 450 kg Extraction duct: 100 mm Screens: 6, 8, and 15 mm – additional screens available Price per screen: €390 Price for replacement blade set: €679 Suitable for, for example: - Plastic waste of all kinds Various materials – HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs etc. Parts from injection molding, blow molding, molding scrap, small bottles, cables, small pipes, profiles, etc. --- Larger systems also available as options: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *depending on screen and material Infeed: 620x400 mm *optionally with suitable extraction/conveying system Granulator MVZ / 30 kW Throughput up to 400 kg/h *depending on screen and material Infeed: 620x500 mm *optionally with suitable extraction/conveying system --- For machine specification, the following information is important: Cedjd N Dn Dspfx Am Ijgt - Length x width x height of input material? - Desired screen size — to what final particle size (mm) should it be reduced? - Required throughput per hour in kg? - Wall thickness in mm? - Material description Photos can also be helpful.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, In this offer, you are purchasing a pre-owned color production system "Xerox Versant 280 Press" Included in the sale: 1 x Xerox Versant 280 Press equipped with the following: - incl. Fiery Pro Server - incl. Paper Deck A-CF03 - incl. Booklet Finisher A-FN13 - incl. Side Trimmer - incl. SquareFold Front Trimmer Not the right configuration? Customisation to your specific requirements is no problem. Please feel free to contact us! Counter Readings: - Total: approx. 2,161,667 pages - Color: approx. 1,846,661 pages - Black: approx. 315,006 pages Condition: This offer is for a used device which may show signs of previous use (such as minor scratches or yellowing). The device has been function-tested. A test printout can be seen in the photo. Packaging and Shipping: You are welcome to inspect the device during our business hours. Please arrange an appointment in advance! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you before shipping or collection. For further information, please feel free to contact us personally. Cgsdpfx Asxnihksm Iet

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, In this offer, you are purchasing a used color production system "Xerox Versant 280" Scope of delivery: 1 x Xerox Versant 280 with the following configuration: - incl. Fiery Server EX180 - incl. Paper Deck A-CF03 - incl. Booklet Finisher A-FN13 - incl. Two-side trimming - incl. Squarefold and front trim Not the right configuration? Custom setups are available—just let us know your requirements! Meter readings: Csdpfx Amoxx Ifcj Ijgt - Total: Approx. 518,174 pages - Color: Approx. 289,321 pages - Black: Approx. 228,853 pages Condition: This offer is for a used machine, which may show signs of previous use (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photos. Packaging and shipping: You are welcome to inspect the device during our business hours. Please arrange an appointment in advance! Sea-worthy packaging and worldwide shipping available upon request! Before shipping or pickup, a video of a functionality test will be provided for your reference. For further information, please feel free to contact us directly.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, In this offer, you are purchasing a used color production system "Xerox Versant 280 Press". Scope of delivery: 1 x Xerox Versant 280 Press with the following configuration: - incl. E300 Controller - incl. Paperdeck A-CF03 - incl. Booklet Finisher A-FN13 Not the right configuration? No problem! We can configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: approx. 557,431 pages Color: approx. 430,279 pages Cgsdpfxsyludmo Am Iet Black: approx. 127,152 pages Condition: This offer concerns a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and Shipping: You are welcome to inspect the device during our business hours. Please schedule an appointment in advance! Sea-worthy packaging and worldwide shipping available on request! Before shipping or collection, a video of the functionality test will be recorded for you. For further information, you are of course welcome to contact us directly.

Kondisi: baru, Tahun pembuatan: 2026, en-1 Csdpfx Amjd Hkqhe Isgt

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Special offer for our demonstration machine Another unit available immediately (ex works Neckartailfingen) approx. 8 operating hours. Suitable for shredding all types of residual wood and also pallet sections. Pallets must be prepared with a jigsaw or chainsaw so that they fit upright into the hopper – see photo 2. Ideally, they should measure approx. 40x20x20 cm, so that the wood can lie flat on the pusher floor. This is when the machine operates most efficiently. A hydraulically operated pusher moves along the base of the shredder and presses the material against the rotor based on load. The material is shredded until it passes through the screen basket. Throughput capacity: up to 200 kg per hour (*depending on the screen and preparation of the material). *Conveyor belt and overband magnet available at an extra charge. + powerful 18.5 kW motor + concave knives + large high-performance gearbox + special load-dependent pusher control Customs tariff number: 84659600 Csdpfodwktkex Am Ijgt Motor: 18.5 kW; 400 V – 50 Hz – 3 ph. Knives: 15 pieces, rotatable multiple times Optional double knife row: + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation selectable (10–30 mm) Extraction port: Ø 160 mm Weight: approx. 1,300 kg (depending on equipment) Dimensions (LxWxH): approx. 1,737 x 1,167 x 1,650 mm Moisture content: < 30% atro Standard features: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - Rapid hydraulics - Auto stop when rotor idles - Rotor speed 70–90 rpm for high throughput - Cycling control to avoid idle times - Performance-boosting step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Shredder height increase by 30 cm (conveyor belt preparation): + €2,080 net - Folding conveyor belt: + €8,770 net Horizontal section: 1,200 mm Inclined section: 2,500 mm Angle: adjustable 0–60° Discharge height: approx. 2,000 mm +/- 100 mm - Overband magnet: + €5,980 net - Control system for conveyor & overband magnet: + €2,750 net (Start and stop synchronized with chipper) - Hopper extension: + €940 net - Eco rings: + €1,980 net (recommended for >15% hardwood) - Special scraper: + €990 net (recommended for veneer or paper) - Double knife row: + €995 net Raw material requirements: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc., cause increased wear.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Machine for special price - available immediately Another machine available immediately (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-established and reliable machine Including control cabinet with timer operation: The press is switched on manually and runs for the set timer duration (e.g. 4 hours), then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5–40 mm (material-dependent) Throughput capacity: up to max. 20 kg/h (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood chips and dust less than 15 mm in length - Moisture content less than 18% (ATRO) - Sand, stones, metals, and mineral content will increase wear Cedpfjd Nnwlsx Am Iegt --- Options at extra cost: - Timer function + €490 net The machine is started manually and switches off automatically after the preset time. - Level sensor for automatic operation + €1,450 net The press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 net (delivery time then approx. 8 weeks) - Special pressing dies + €2,950 net ---

Kondisi: baru, Tahun pembuatan: 2026, Extremely powerful industrial magnet for iron separation Special price €990 net (Shipping €14.90 net) *You can find the construction lengths in picture 2 The effective surface features a stainless steel end plate (material 1.4301). Cgsdpotqfhxofx Am Iet For installation, there are threaded holes on the rear side. *Handle available upon request The block magnet systems can be used at a maximum operating temperature of up to +100°C. The magnet surface should be cleaned regularly from the collected iron parts. Attraction distances for all types, e.g.: For an M5 steel nut approx. 60 mm For an M5 x 30 screw approx. 100 mm Installation example 1: Mounted above a conveyor belt, "iron parts jump onto the magnet's gripping surface". Installation example 2: Mounted in a pipeline system with direct contact to the material flow. For high separation reliability, the installation of several block magnets in a cascade arrangement is possible. Installation and safety instructions: When handling, already during unpacking and later during installation, ensure that no loose iron parts, such as tools or screws, are lying nearby. The magnetic force is so strong that painful injuries can occur if fingers are caught between iron parts and the magnet’s active surface. No steel parts should be located within a minimum distance of 400 mm beneath the active surface.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jam operasional: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor with reduced knife projection, suitable for both hard and soft materials + 22 kW motor + Efficient square knives *For pallets: up to a maximum of 10 pallets per hour (*depending on screen size and material. Significantly higher throughput possible for smaller wood residues) Motor: 22 kW; 400 V – 50 Hz – 3-phase Screen: 15/20 mm or by arrangement (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) – can be swapped Suction connection Ø 200 mm Csdpfxsx Af Rds Am Isgt Feed opening: 1000 x 1000 mm Dimensions: 2000 x 1800 x 1645 mm Sample picture above: machine color may vary Weight: 1920 kg Standard features included: - Control cabinet with PLC control - Automatic star/delta start - High-speed hydraulic system - Auto stop function with rotor idle - Rotation speed: 70–90 rpm for high throughput - Intermittent control to avoid idle times - Performance-boosting incremental pusher control - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE conform Available options (for additional charge): - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angle conveyor (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Conveyor and magnet control unit + €2,750 net (start/stop synchronized with shredder) - Enlarged hopper 1500 x 1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must not exceed 25% - Material feed must be free of metals and mineral contamination. Otherwise, tool damage and/or increased wear may occur.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Machine for Sale at a Special Price Machine available immediately (ex works Neckartailfingen) Demo machine Your Advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-established and reliable machine Including control cabinet with timer operation The press is manually switched on and runs until the set time on the timer (e.g., 4 hours) has elapsed. After that, the press switches off automatically. Cgedpfsfci D Aox Am Iot Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm *depending on material Throughput capacity up to a maximum of 25 kg/h *depending on material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Silo capacity: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 15% (ATRO) - Sand, stones, metals, and minerals increase wear --- Optional at extra charge: -Timer function + €490 net Machine is started manually and switches off automatically after the set time. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Price surcharge + €690 net (delivery time approx. 8 weeks) ---

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Professional machine for plastic shredding Base unit starting from €24,990 net Well-suited for shredding: - Paper, cardboard, pipes, profiles, crates, canisters, buckets, cans, wooden pallet offcuts, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Includes: - Special rotor with embedded knives (reduced power requirement) - Minimal cutting gap between rotor knives and counter knives Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Control system: PLC Cutting chamber opening (top): 600 x 800 mm Parts should be max. approx. 500 x 500 mm* *Height is less critical Hydraulically actuated ram Screen perforation of your choice (25–40 mm) For plastics, coarser screens are recommended (30–40 mm) *For finer granulation, a two-stage size reduction process with an additional MVZ granulator (screens 5–15 mm) is recommended. Suction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1737 x 1167 x 1650 mm Additional options at extra cost: - Raise shredder by approx. 25 cm (preparation for conveyor discharge) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet controls + €2,750 net (start and stop synchronized with shredder) - Alternatively, manual start/stop for conveyor belt + €595 net Material requirements: - Moisture content (atro) must be below 25% - Metals and mineral impurities such as sand, stones, etc. will cause increased wear. We are happy to arrange a free test using your material at our facility in Neckartailfingen. Alternatively, you can send your material via freight forwarder and we will document the test with photos and videos. --- *Only for brittle plastics with medium hardness. *Not suitable for elastic or extremely hard and heavy plastics, as this will impact system durability. --- Optional next larger machines: Base unit: Shredder MGZ 830 K-S – 18.5 kW Cutting chamber opening (top): 800 x 1,000 mm Parts should be max. approx. 720 x 700 mm* *Height is less critical from €39,995 net (options according to requirements) Base unit: Shredder MGZ 1030 K-S – 22 kW Cutting chamber opening (top): 1,000 x 1,000 mm Parts should be max. approx. 900 x 700 mm* *Height is less critical from €49,975 net (options according to requirements) Codod H R Sxepfx Am Ijgt Base unit: Shredder MGZ 1330 K-S – 37 kW Cutting chamber opening (top): 1,300 x 1,200 mm Parts should be max. approx. 1,200 x 700 mm* *Height is less critical from €79,975 net (options according to requirements)

Tahun pembuatan: 2026, Kondisi: baru, The offer includes only the neodymium overband magnet, not the conveyor belt underneath. Neodymium magnets are among the strongest magnets in the world, featuring extremely high holding force and far outperforming ferrite magnets. Extremely high separation efficiency, depending on material flow height and input material. Probably the most compact overband magnet on the market. Competitors often use less powerful ferrite magnets to save costs. Cgedpjdubpuofx Am Iot Approximate dimensions: Length: 104 cm Width: 22 cm Height: 28 cm (at the motor) *Without control system Surcharge for a simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet: approx. 600 x 68 x 36.5 mm * Over a length of 600 mm, nails are attracted and deflected laterally, exiting the magnetic field region. This overband magnet should be installed approx. 7 - 10 cm above the material flow. *Mounting/suspension to be provided by customer depending on the maximum length of metal pieces. Ideal for separating nails from wood chips. Optionally, can also be used in a suctioned single-shaft shredder. Requirements: *Your belt width or internal usable width (of the existing conveyor belt) should ideally be less than 55 cm *Suitable for separating nails from material streams less than 12 mm high, with chip lengths below 25 mm. ----- Optional, at extra cost: Cross and incline conveyor demonstrators from €8,770 net

Kondisi: baru, Tahun pembuatan: 2026, c4a1bb14 Codechuvrjpfx Am Ijgt

Kondisi: seperti baru (mesin pameran), Technical data for shelf racking upright: Racking system: Dexion Type: HI280 Scope of delivery includes: 01x Shelf racking upright, new product, grade II Material colour: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment pitch: 25 mm Incl. cross brace and base plates The uprights are supplied unassembled 2,100 mm high 400 mm deep Note: The shelf racking uprights will be delivered unassembled with your order. For an additional charge of €5.00 / unit plus VAT, we can also supply the uprights pre-assembled. This is new, unused stock, grade II. Grade II new stock means some dust deposits or soiling may be present. Currently in stock: 30 pcs. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Cgjdpjtrmfwsfx Am Ijt General information about the item: This item is offered for collection only. If you require transport or shipping, additional charges will apply. These costs may vary depending on delivery location and/or order scope, and can be requested from us separately.

Kondisi: sangat baik (bekas), en-001 Csdjtrwa Nspfx Am Iegt

Kondisi: baru, Tahun pembuatan: 2026, Delivery time: Approx. 4–5 months Your advantages: + Extremely large cutting unit opening; 1300 x 1200 mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful with 37 kW drive power Technical data: Color: grey / blue Feed opening top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (RPM): 65 – 125 Power requirement (kW): 37 Screen perforation (mm): 10 – 40 (selectable) Tools: 37/70 knives Suction nozzle diameter (mm): 200 mm Dimensions: 2430 x 2410 x 1735 mm (LxWxH) Weight (approx. kg): 3,500 Optional at extra cost: - Second knife row, for up to 30% higher throughput - High-speed hydraulics, for increased output - Preparation for conveyor belt discharge - Conveyor belt - Overbelt magnet HAWK-EYE *For shredding veneer or paper (anything thinner than 3 mm), we recommend a segmented floor. Special option available at additional cost. --- Option: Pusher Extension *available at extra cost Maximum pallet size up to 1200/1400 mm possible (with pusher extension option, the top cutting unit opening is 1300 x 1700 mm, surcharge +14,975.–) *significantly longer production time required. Cgjdpfjgbkkrsx Am Iet *Larger machines available on request --- Raw material requirements: - Moisture content (atro) must be below 20% - Material must be free of metals and mineral impurities. Damage to tools and/or increased wear may result.

Kondisi: baru, Tahun pembuatan: 2025, Satu mesin lagi siap dikirim segera! Mesin press briket dengan PLC dan sistem otomatis panjang briket Kapasitas: hingga maksimal 60 kg/jam Briket: 50 mm silindris Motor: 5,5 kW Dimensi: 1.900 x 1.350 x 1.410 mm Berat: sekitar 860 kg Persyaratan: Material input sebaiknya lebih pendek dari 25 mm panjang serpih Cgsdsv Rpxlopfx Am Iet Kadar air 6–12% ATRO Mesin cocok untuk operasi diskontinu. Contoh: briketisasi hingga 2,5 jam; 1 jam jeda. dst. Jika mesin harus beroperasi lebih dari 2,5 jam secara kontinu, pendinginan opsional harus dipasang.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Special price: €29,970 net One machine is currently available for immediate delivery. This is the ideal machine for shredding bulky, lightweight aluminium chips or turnings. Not suitable for processing solid aluminium parts. Included features: + Optimized cutting geometry + Customized pusher control + Load-dependent, hydraulically controlled pusher (presses the chips against the cutting unit) Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 40x40 mm, multiple cutting edges can be rotated Rotor diameter: 260 mm Control system: Omron PLC Cutting chamber opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Cgedpfx Amjgmh H Tj Iot Hydraulically operated pusher Screen perforation as required (15 - 40 mm) Extraction connection Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Shredder height increase by 30 cm (preparation for conveyor belt) + €2,990 net - Angled conveyor belt (discharge height approx. 220 cm) + €9,770 net - Overbelt magnet + €6,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (start and stop synchronized with shredder) We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send us your material via freight, and we will document the test with photos and videos.