Beli Mütek Systemtechnik Mesin Briket / Mesin Briket bekas (75.814)

Kondisi: baru, Tahun pembuatan: 2026, c4a1bb14 Dcodpjchuvrofx Aiujh

Kondisi: baru, Tahun pembuatan: 2026, Our best-selling briquetting press – the classic model. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras (at additional cost): * Surcharge for fill level sensor for automatic operation: + €995 net * Surcharge for large pre-compaction chamber: + €970 (recommended for very light materials such as straw; machine width increases by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (depending on material): up to 60 kg/h* *Depends on bulk density *Based on a bulk density of 200 kg per cubic meter Dcjdpsgl Nlmsfx Aiush Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Cooling option for pressing pliers: no Cooling option for hydraulic oil: yes Fill level monitoring option: yes CE compliant Material requirements: - Moisture content (atro) must be between 6% and 18% - Maximum chip length: 15 mm - Installation temperature: temperate room at a minimum of +5°C - Customer is responsible for preventing hydraulic oil loss - Feeding material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Kondisi: baru, Tahun pembuatan: 2025, Satu mesin lagi siap dikirim segera! Mesin press briket dengan PLC dan sistem otomatis panjang briket Kapasitas: hingga maksimal 60 kg/jam Briket: 50 mm silindris Motor: 5,5 kW Dimensi: 1.900 x 1.350 x 1.410 mm Berat: sekitar 860 kg Persyaratan: Material input sebaiknya lebih pendek dari 25 mm panjang serpih Dsdpov Rpxljfx Aiuoch Kadar air 6–12% ATRO Mesin cocok untuk operasi diskontinu. Contoh: briketisasi hingga 2,5 jam; 1 jam jeda. dst. Jika mesin harus beroperasi lebih dari 2,5 jam secara kontinu, pendinginan opsional harus dipasang.

Kondisi: baru, Tahun pembuatan: 2026, * Options available at additional cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality even in continuous operation. The pressing process is carried out solely by hydraulic pressure, without any binding agents. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation under existing extraction and filter systems as complete disposal units are also available. MPP NEM machines can be combined into a system based on customer requirements. The chip hopper of the press can be fed manually, via conveyor belt, extraction system, or with a tipping skip. For fully automated operation, the use of a lifting/tipping device in conjunction with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm; the diameter, depending on the type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a drip tray, allowing coolants, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length can be loaded into the press's storage hopper. A stirring unit at the bottom of the hopper prevents bridging and moves the material into the pre-compaction chamber. Within this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main pressing cylinder compresses the material against a vertical slide until the preset pressure is reached. The vertical cylinder then lifts, and the compact briquette is ejected. The more homogeneous the input material, the more uniform the briquette length. Dcsdegfm Ryopfx Aiueh Briquetting offers the following advantages: •Reduction of volume by up to 90% •Emulsion recovery •Cost savings in storage and transport •Cost-effective disposal •Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to max. 350 kg/h (material dependent; chip length less than 10 mm) Last test with aluminum chips less than 18 mm – approx. 260 kg/h *more details after a free test with your material Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 liters per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm (L x W x H) Weight: 2250 kg Hydraulic precompaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Kondisi: baru, Tahun pembuatan: 2026, Production time for the machine is approx. 3.5 months Very robust machine with high pressing force - also suitable for producing a marketable briquette quality* depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional features: Surcharge for cooling unit: + €3,995 net (can also be retrofitted later) * Cools the pressing jaw (important for operations over 3.5 hours) and the hydraulic oil * Cooling unit recommended for continuous operation exceeding 3.5 hours at a time. Large pre-compactor chamber: + €1,975 net Recommended for light input materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (material-dependent): up to 110 kg/h* Last test: approx. 87 kg/h *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil capacity: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 cbm Pump: 37 liters Hydraulic pre-compactor Option for cooled pressing jaw: yes, with special accessory cooled pressing jaw Pressing jaw cooling via water tank (to be supplied by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette strand option: yes (material-dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and no more than 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur. Dsdpfeffh Atex Aiuoch

Kondisi: baik (bekas), Clean air extraction Dcsdpsrb D Nofx Aiush Used machine, good condition Pictures to follow Mobile Jet 160, Connection: 160 mm, Fan: 2.2 kW Airflow rate: 1,850 m³/h, 400 V

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Special offer for our demonstration machine Another unit available immediately (ex works Neckartailfingen) approx. 8 operating hours. Dcodpfxsdwktke Aiueh Suitable for shredding all types of residual wood and also pallet sections. Pallets must be prepared with a jigsaw or chainsaw so that they fit upright into the hopper – see photo 2. Ideally, they should measure approx. 40x20x20 cm, so that the wood can lie flat on the pusher floor. This is when the machine operates most efficiently. A hydraulically operated pusher moves along the base of the shredder and presses the material against the rotor based on load. The material is shredded until it passes through the screen basket. Throughput capacity: up to 200 kg per hour (*depending on the screen and preparation of the material). *Conveyor belt and overband magnet available at an extra charge. + powerful 18.5 kW motor + concave knives + large high-performance gearbox + special load-dependent pusher control Customs tariff number: 84659600 Motor: 18.5 kW; 400 V – 50 Hz – 3 ph. Knives: 15 pieces, rotatable multiple times Optional double knife row: + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation selectable (10–30 mm) Extraction port: Ø 160 mm Weight: approx. 1,300 kg (depending on equipment) Dimensions (LxWxH): approx. 1,737 x 1,167 x 1,650 mm Moisture content: < 30% atro Standard features: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - Rapid hydraulics - Auto stop when rotor idles - Rotor speed 70–90 rpm for high throughput - Cycling control to avoid idle times - Performance-boosting step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Shredder height increase by 30 cm (conveyor belt preparation): + €2,080 net - Folding conveyor belt: + €8,770 net Horizontal section: 1,200 mm Inclined section: 2,500 mm Angle: adjustable 0–60° Discharge height: approx. 2,000 mm +/- 100 mm - Overband magnet: + €5,980 net - Control system for conveyor & overband magnet: + €2,750 net (Start and stop synchronized with chipper) - Hopper extension: + €940 net - Eco rings: + €1,980 net (recommended for >15% hardwood) - Special scraper: + €990 net (recommended for veneer or paper) - Double knife row: + €995 net Raw material requirements: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc., cause increased wear.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, The ideal machine for cable shredding Featuring optimized cutting geometry Approximately 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 14 pieces, 40x40mm, reversible multiple times Rotor diameter: 260 mm Control system: Omron PLC Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (15 - 40 mm) Suction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double row of blades + €1,990 net (28 instead of 14) - Surcharge for 4-sided segmented floor + €2,170 net (Prevents jamming of the pusher. Recommended when shredding plastics, paper, or veneer with a thickness less than 3 mm.) - Shredder height increase by 30 cm (preparation for conveyor belt) + €1,980 net - Angle conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Control system for conveyor and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Dsdpfx Aogmfa Aoiuoch Ref. Bea9ia3l27 Feed material requirements: - Mineral impurities such as sand, stones, etc., will increase wear. We would be pleased to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us by freight, and we will document the test with photos and videos.

Kondisi: sangat baik (bekas), Nomor katalog 7984 SPESIFIKASI TEKNIS Dcedpfjzbazvsx Aiuoh - Tekanan: hidrolik - Bentuk briket: bulat - Diameter briket: 70mm - Diameter tangki: 1000mm - Kapasitas: hingga 10 briket/menit, sekitar 90 kg/jam - Operasi mesin otomatis - Motor: 5,5kW - Dimensi (P/L/T): 1800x1200x1500mm - Berat: sekitar 650kg KEUNGGULAN – Produksi Italia – Briket press bekas – Tidak dicat ulang – Kondisi sangat baik Harga netto: 33.900 PLN Harga netto: 8.070 EUR (berdasarkan kurs 4,2 EUR) (Harga dapat berubah sesuai dengan fluktuasi kurs)

Kondisi: sangat baik (bekas), Nomor katalog 7737 DATA TEKNIS - kekuatan penekanan: hidrolik - bentuk briket: bulat - diameter briket: 70 mm Dcjdpfszbavyex Aiujh - diameter tangki: 1000 mm - kapasitas sekitar 70 kg/jam - pengoperasian mesin otomatis - motor: 5,5 kW - dimensi (P/L/T): 1800x1150x1540 mm - berat: 900 kg KEUNGGULAN – produksi Italia – mesin briket bekas – dokumentasi DTR – kondisi sangat baik Harga netto: 34.900 PLN Harga netto: 8.300 EUR (tergantung pada kurs 4,2 EUR) (Harga dapat berubah seiring fluktuasi yang lebih tinggi)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior models; however, it is equipped with a larger motor and hydraulic pump, and a more advanced electrical system. Dedpowyc H Tofx Aiuoch General features: - Robust construction - Highly user-friendly and economical to operate - Easy maintenance - Inspection door with viewing window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Low oil level switch - Control panel located at the machine front - Automatic sensor for press start/stop - Emergency stop button - Wiring diagram - CE certified - Operating manual included Technical data: - Motor rating: 7.5 kW, connection: 400 V, 50 Hz - Number of press cycles per minute: 14 - Throughput: 60 - 100 kg/h (material dependent) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 - Oil tank volume: approx. 180 liters - Container diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Includes approx. 2 m briquette transfer tube Note on used machines: • Technical specifications subject to change and prior sale excepted. • Prices quoted are ex location—free loading. • The machine has been cleaned and function tested. • All machines are sold as inspected, with no guarantee or warranty claims whatsoever. The buyer is welcome to inspect the machines on site. • Special agreements are only valid in written form. (Inquiries will only be answered if address and telephone number are provided!)

Kondisi: bekas, Tahun pembuatan: 2016, de20240618-01 Dsdpfszbc Ixjx Aiuoch

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Nomor katalog 7809 Dedpfjzab Rpex Aiuech DATA TEKNIS - kekuatan penekanan: hidrolik - bentuk briket: bulat - diameter briket: 70 mm - diameter tangki: 900 mm - pengoperasian mesin otomatis - jendela inspeksi pada corong mesin - dilengkapi pemanas oli tambahan - motor: 5,5 kW - dimensi panjang/lebar/tinggi: 1600x1200x1500 mm - berat: 685 kg KEUNGGULAN – tanpa cat – produksi Italia – dilengkapi pemanas oli tambahan – mesin briket bekas – kondisi sangat baik Harga netto: 36.900 PLN Harga netto: 8.786 EUR sesuai kurs 4,20 EUR (Harga dapat berubah tergantung fluktuasi nilai tukar)

Kondisi: baru, Wood Briquetting Press Amis ABP 60 L -Exhibition Machine- ----- Technical Data ----- Briquette Ø: 60 mm Hydraulic Unit: 3 kW, 140 bar Dcedpfx Aiou R Sxxoueh Voltage: 400 V Frequency: 50 Hz Circuit Protection: 16 A Output approx.: 20–35 kg/h Weight approx.: 300 kg - Extremely simple operation - Hydraulic control system - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as controllers, sensors, or complicated controls - Large feed hopper - Hardened briquette tongs - Replaceable pressing rod - Pressing without the need for additives - Thanks to the pre-compressor, even voluminous shavings can be processed - No adjustments or monitoring of pressure required - new exhibition machine -

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, jam operasional: 10.367 h, Fungsionalitas: berfungsi sepenuhnya, RUF LIGNUM R2 Brikettieranlage zum Verkauf in ausgezeichnetem technischen Zustand. Die Maschine verfügt über eine geringe Betriebsstundenanzahl und ist sofort einsatzbereit. Es sind keine zusätzlichen Investitionen erforderlich. Eine ideale Lösung für Unternehmen, die die Brikettproduktion schnell starten oder erweitern möchten. GRUNDINFORMATIONEN: Modell: RUF LIGNUM R2 Baujahr: 2021 Betriebsstunden: 10.367 h Linksausführung — Materialzufuhr von der linken Seite Zustand: ausgezeichnet, voll funktionsfähig Verfügbarkeit: sofort verfügbar ab Estland, Saaremaa. HAUPTTECHNISCHE DATEN: Leistung: bis zu 570 kg/h Hauptmotor: 22 kW Pressdruck: bis zu 300 bar Siemens SPS-Steuerungssystem Maschinenmaße (L × B × H): 2900 × 2000 × 2100 mm Maschinengewicht: 3.800 kg Brikettmaße: 150 × 60 mm Erforderlicher Materialfeuchtigkeitsgehalt: bis zu 15 % IM LIEFERUMFANG ENTHALTEN: Materialeinfüllbunker Vorkompressionssystem 45° Brikettauswurfschacht Anschluss für Absauganlage Vollständige Dokumentation VORTEILE: Djdpfjzapddjx Aiujch Energiesparendes RUF Pressenmodell Heizung des Hydrauliköltanks und Schaltschrankheizung für den Betrieb in unbeheizten Produktionsstätten Für den Dauerbetrieb (24/7) geeignet Niedrige Betriebs- und Wartungskosten Für verschiedene Arten von Holzabfällen geeignet PREIS: 50.000 € zzgl. MwSt.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2009, diameter briket: 100 mm, 3× briquette press Di Più MB100 – Year of manufacture 2009 – Complete plant with saws & accessories For sale are 3 units of briquette presses, model Di Più MB100, year 2009, including saws, conveying technology, and additional accessories. The machines come from industrial use and are ideal for producing wood briquettes from sawdust, shavings, and wood residues. --- Technical data (per machine): Type: Di Più BRIK MB100 Year: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Pressing pressure: approx. 2,000 – 2,500 kg/cm² Dedpfx Aozazh Ioiusch Main motor: 75 kW Total power: approx. 98 kW Material moisture: optimal 8 – 12 % Particle size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic piston press --- Equipment: Material hopper Screw conveyors Hydraulic system Control cabinets Saws for briquette length cutting Protective covers & safety systems Discharge units --- Scope of delivery: 3 complete briquette presses Di Più MB100 Saws Conveying technology & accessories Spare parts by agreement --- Fields of application: Sawmills Wood processing Biomass plants Briquette production for energy & sale Location: on request Transport: arrangement possible by agreement Price: on request Sale as single units or complete package possible

Kondisi: baru, Tahun pembuatan: 2026, Production time approx. 4-5 months --- Our best-selling briquetting press series + Proven, straightforward technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust construction, ensuring consistent briquette quality during continuous operation. The compaction process is performed without the addition of binding agents, relying solely on hydraulic pressure. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard hopper has a volume of approximately 0.5 m³. Hoppers with larger capacities or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. Depending on specific customer requirements, MPP NEM single units can be combined to create a complete system. The press’s chip container can be loaded manually, by conveyor belt, via extraction system, or with a tipping skip. For systems designed for fully automated operation, it is advisable to use a lift-tipping device in combination with a crusher. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of each briquette is 40 to 75 mm depending on the model, and the diameter, according to type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing coolant, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length are loaded into the storage hopper. A stirrer at the bottom of the hopper prevents material bridging and feeds material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the press block. The main press cylinder then compacts the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves up, and the stable briquette is ejected. Briquette production offers the following advantages: • Reduction of material volume by up to 90% • Emulsion recovery • Cost savings in storage and transportation • Economical disposal • Profitable resale -- Briquetting Press NEM 300 Throughput capacity: up to approx. 200 kg per hour *heavily dependent on material type. - On the last test with aluminium granulate under 5 mm – approx. 186 kg per hour + the recovered emulsion. - On the last test with aluminium shavings under 18 mm – approx. 120 kg per hour + the recovered emulsion. Dcsdschqxxopfx Aiujh Technical data: Motor: 7.5 kW (+ 0.55 kW for cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Opt. briquette stroke: 80 mm Pump: 80 litres Storage hopper: approx. 0.5 m³ capacity (expandable)

Kondisi: baru, Tahun pembuatan: 2026, en-GB Dcsdpfxod Nm Sio Aiuoh

Kondisi: baru, Tahun pembuatan: 2026, jam operasional: 8 h, en-GB Dsdpfx Aiexfwdsusch

Kondisi: baik (bekas), Good, used condition Main motor: 11 kW Dsdpfx Ast Hxudeiusch Throughput up to max. 200 kg/h Year of manufacture: 12/2008 / Technically inspected in 01/2025 Briquette size: 150x60 mm *Used machine, sold as seen Functionality guaranteed upon handover

Kondisi: baik (bekas), Technical Data: Briquetting Press RUF RB 440 Pressing capacity when processing wood: up to a maximum of 440 kg/h Material moisture content: maximum 15% Dcedpfxjt H D Eze Aiush Motor power: approx. 30 kW Briquette size, rectangular: 150 x 60 mm Length: 40 – 110 mm Dimensions (approx.): 1680 x 1800 x 2000 mm Weight: 3000 kg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Machine for Sale at a Special Price Machine available immediately (ex works Neckartailfingen) Demo machine Your Advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-established and reliable machine Including control cabinet with timer operation The press is manually switched on and runs until the set time on the timer (e.g., 4 hours) has elapsed. After that, the press switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm *depending on material Throughput capacity up to a maximum of 25 kg/h *depending on material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Silo capacity: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 15% (ATRO) - Sand, stones, metals, and minerals increase wear --- Dedpefci D Asfx Aiujch Optional at extra charge: -Timer function + €490 net Machine is started manually and switches off automatically after the set time. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Price surcharge + €690 net (delivery time approx. 8 weeks) ---

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Mesin briket untuk serpihan aluminium atau baja Tekanan tekan sangat tinggi: 3.700 kg/cm² Corong besar: 600 x 1500 mm Ukuran briket: 60 x 40 mm Kapasitas: Serpihan aluminium – hingga 70 kg/jam Serpihan baja – hingga 180 kg/jam Serpihan kuningan – hingga 220 kg/jam *tergantung pada material awal dan pengaturan Termasuk: - Bak emulsi - Pompa emulsi Dcjdsw Ig Suopfx Aiujh - Pendingin oli

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2023, en-001 Dedpfxod N Dnhs Aiuoch

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Special price for trade show machine *Available by arrangement New: With the frequency inverter option, eligible for up to a maximum of 45% government funding Dcodpfsd Su Hxox Aiueh Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock, they only need to be connected together 1. Technical Data – Briquetting Press: Our best-selling briquetting press – the classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity tariff number: 84793010 Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput capacity (material-dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter . Motor output: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Total system footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height – 2.8 m (special container) Delivery possible in 2 components Weight: approx. 1200 kg Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compactor Press clamp cooling option: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant 2. Technical Data – Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when facing the dust bin) Residual dust content: